From 3cdf4ad9633e3ca616617e76b46915c02cba426b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 13 May 2015 09:20:04 -0500 Subject: rtc: pxa: convert to use shared sa1100 functions Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a superset of functionality. Having 2 drivers sharing the same memory resource is not allowed by the driver model if resources are properly declared. This problem was avoided by not adding memory resources to the SA1100 RTC driver, but that prevents clean-up of the SA1100 driver. This commit converts the PXA RTC to use the exported SA1100 RTC functions. Now the sa1100-rtc and pxa-rtc devices are mutually exclusive, so we must remove the sa1100-rtc from pxa27x and pxa3xx. Signed-off-by: Rob Herring Cc: Daniel Mack Cc: Haojian Zhuang Cc: Robert Jarzmik Cc: Russell King Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: linux-arm-kernel@lists.infradead.org Cc: rtc-linux@googlegroups.com Signed-off-by: Alexandre Belloni --- drivers/rtc/Kconfig | 12 +++++++----- drivers/rtc/rtc-pxa.c | 51 ++++++++++++++++++++++++--------------------------- 2 files changed, 31 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 35ea04c50a5c..0f65a222a48a 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1306,11 +1306,13 @@ config RTC_DRV_GENERIC just say Y. config RTC_DRV_PXA - tristate "PXA27x/PXA3xx" - depends on ARCH_PXA - help - If you say Y here you will get access to the real time clock - built into your PXA27x or PXA3xx CPU. + tristate "PXA27x/PXA3xx" + depends on ARCH_PXA + select RTC_DRV_SA1100 + help + If you say Y here you will get access to the real time clock + built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs + consisting of an SA1100 compatible RTC and the extended PXA RTC. This RTC driver uses PXA RTC registers available since pxa27x series (RDxR, RYxR) instead of legacy RCNR, RTAR. diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index 4561f375327d..fb9b3a7d2266 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -32,6 +32,8 @@ #include +#include "rtc-sa1100.h" + #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 #define MAXFREQ_PERIODIC 1000 @@ -86,10 +88,9 @@ __raw_writel((value), (pxa_rtc)->base + (reg)) struct pxa_rtc { + struct sa1100_rtc sa1100_rtc; struct resource *ress; void __iomem *base; - int irq_1Hz; - int irq_Alrm; struct rtc_device *rtc; spinlock_t lock; /* Protects this structure */ }; @@ -184,25 +185,25 @@ static int pxa_rtc_open(struct device *dev) struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev); int ret; - ret = request_irq(pxa_rtc->irq_1Hz, pxa_rtc_irq, 0, + ret = request_irq(pxa_rtc->sa1100_rtc.irq_1hz, pxa_rtc_irq, 0, "rtc 1Hz", dev); if (ret < 0) { - dev_err(dev, "can't get irq %i, err %d\n", pxa_rtc->irq_1Hz, - ret); + dev_err(dev, "can't get irq %i, err %d\n", + pxa_rtc->sa1100_rtc.irq_1hz, ret); goto err_irq_1Hz; } - ret = request_irq(pxa_rtc->irq_Alrm, pxa_rtc_irq, 0, + ret = request_irq(pxa_rtc->sa1100_rtc.irq_alarm, pxa_rtc_irq, 0, "rtc Alrm", dev); if (ret < 0) { - dev_err(dev, "can't get irq %i, err %d\n", pxa_rtc->irq_Alrm, - ret); + dev_err(dev, "can't get irq %i, err %d\n", + pxa_rtc->sa1100_rtc.irq_alarm, ret); goto err_irq_Alrm; } return 0; err_irq_Alrm: - free_irq(pxa_rtc->irq_1Hz, dev); + free_irq(pxa_rtc->sa1100_rtc.irq_1hz, dev); err_irq_1Hz: return ret; } @@ -215,8 +216,8 @@ static void pxa_rtc_release(struct device *dev) rtsr_clear_bits(pxa_rtc, RTSR_PIALE | RTSR_RDALE1 | RTSR_HZE); spin_unlock_irq(&pxa_rtc->lock); - free_irq(pxa_rtc->irq_Alrm, dev); - free_irq(pxa_rtc->irq_1Hz, dev); + free_irq(pxa_rtc->sa1100_rtc.irq_1hz, dev); + free_irq(pxa_rtc->sa1100_rtc.irq_alarm, dev); } static int pxa_alarm_irq_enable(struct device *dev, unsigned int enabled) @@ -320,12 +321,13 @@ static int __init pxa_rtc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct pxa_rtc *pxa_rtc; + struct sa1100_rtc *sa1100_rtc; int ret; - u32 rttr; pxa_rtc = devm_kzalloc(dev, sizeof(*pxa_rtc), GFP_KERNEL); if (!pxa_rtc) return -ENOMEM; + sa1100_rtc = &pxa_rtc->sa1100_rtc; spin_lock_init(&pxa_rtc->lock); platform_set_drvdata(pdev, pxa_rtc); @@ -336,13 +338,13 @@ static int __init pxa_rtc_probe(struct platform_device *pdev) return -ENXIO; } - pxa_rtc->irq_1Hz = platform_get_irq(pdev, 0); - if (pxa_rtc->irq_1Hz < 0) { + sa1100_rtc->irq_1hz = platform_get_irq(pdev, 0); + if (sa1100_rtc->irq_1hz < 0) { dev_err(dev, "No 1Hz IRQ resource defined\n"); return -ENXIO; } - pxa_rtc->irq_Alrm = platform_get_irq(pdev, 1); - if (pxa_rtc->irq_Alrm < 0) { + sa1100_rtc->irq_alarm = platform_get_irq(pdev, 1); + if (sa1100_rtc->irq_alarm < 0) { dev_err(dev, "No alarm IRQ resource defined\n"); return -ENXIO; } @@ -354,15 +356,10 @@ static int __init pxa_rtc_probe(struct platform_device *pdev) return -ENOMEM; } - /* - * If the clock divider is uninitialized then reset it to the - * default value to get the 1Hz clock. - */ - if (rtc_readl(pxa_rtc, RTTR) == 0) { - rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - rtc_writel(pxa_rtc, RTTR, rttr); - dev_warn(dev, "warning: initializing default clock" - " divider/trim value\n"); + ret = sa1100_rtc_init(pdev, sa1100_rtc); + if (!ret) { + dev_err(dev, "Unable to init SA1100 RTC sub-device\n"); + return ret; } rtsr_clear_bits(pxa_rtc, RTSR_PIALE | RTSR_RDALE1 | RTSR_HZE); @@ -402,7 +399,7 @@ static int pxa_rtc_suspend(struct device *dev) struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev); if (device_may_wakeup(dev)) - enable_irq_wake(pxa_rtc->irq_Alrm); + enable_irq_wake(pxa_rtc->sa1100_rtc.irq_alarm); return 0; } @@ -411,7 +408,7 @@ static int pxa_rtc_resume(struct device *dev) struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev); if (device_may_wakeup(dev)) - disable_irq_wake(pxa_rtc->irq_Alrm); + disable_irq_wake(pxa_rtc->sa1100_rtc.irq_alarm); return 0; } #endif -- cgit v1.2.3