From 354210f8046cc801d6001f10c5c32967932b09a2 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sat, 19 Dec 2015 09:59:37 -0500 Subject: Revert "mac80211_hwsim: support any address in userspace" This reverts commit cd37a90b2a417e5882414e19954eeed174aa4d29. Different userspace programs interpreted HWSIM_ATTR_ADDR_TRANSMITTER and HWSIM_ATTR_ADDR_RECEIVER differently: some expected it to be an unchanging hardware address that is tied to the radio despite which address is configured on the interface, while others expected to be a copy of the address in the frame (the configured address). The intent of the original authors is unclear. The latter interpretation doesn't really work properly with multiple vifs and broadcast frames. Also, as the TA is already in the frame, userspace programs can actually support configured addresses in the former interpretation by mapping between them and the supplied HWSIM_ATTR_ADDR_TRANSMITTER. So, in the interest of API stability, revert to the previous mode of operation and going forward use the former interpretation. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index c32889a1e39c..a28414c50edf 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -991,7 +991,8 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw, goto nla_put_failure; } - if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER, ETH_ALEN, hdr->addr2)) + if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER, + ETH_ALEN, data->addresses[1].addr)) goto nla_put_failure; /* We get the skb->data */ @@ -2736,7 +2737,7 @@ static struct mac80211_hwsim_data *get_hwsim_data_ref_from_addr(const u8 *addr) spin_lock_bh(&hwsim_radio_lock); list_for_each_entry(data, &hwsim_radios, list) { - if (mac80211_hwsim_addr_match(data, addr)) { + if (memcmp(data->addresses[1].addr, addr, ETH_ALEN) == 0) { _found = true; break; } -- cgit v1.2.3 From 5dc3b7b9eb7efbd0dd57cef50ed29c2a709bf51b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Jan 2016 16:00:30 +0100 Subject: brcmfmac: add missing include linux/module.h is required for defining module parameters Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index 4265b50faa98..cfee477a6eb1 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include "core.h" -- cgit v1.2.3 From b7e2d195cc523bd92ed7a64aac089421dbab2a2d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 18 Jan 2016 20:39:56 +0100 Subject: ssb: mark ssb_bus_register as __maybe_unused The SoC variant of the ssb code is now optional like the other ones, which means we can build the framwork without any front-end, but that results in a warning: drivers/ssb/main.c:616:12: warning: 'ssb_bus_register' defined but not used [-Wunused-function] This annotates the ssb_bus_register function as __maybe_unused to shut up the warning. A configuration like this will not work on any hardware of course, but we still want this to silently build without warnings if the configuration is allowed in the first place. Signed-off-by: Arnd Bergmann Fixes: 845da6e58e19 ("ssb: add Kconfig entry for compiling SoC related code") Acked-by: Michael Buesch Signed-off-by: Kalle Valo --- drivers/ssb/main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index cde5ff7529eb..d1a750760cf3 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -613,9 +613,10 @@ out: return err; } -static int ssb_bus_register(struct ssb_bus *bus, - ssb_invariants_func_t get_invariants, - unsigned long baseaddr) +static int __maybe_unused +ssb_bus_register(struct ssb_bus *bus, + ssb_invariants_func_t get_invariants, + unsigned long baseaddr) { int err; -- cgit v1.2.3 From e0045bf80f62779ba75ba04513020d60e59f5298 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 19 Jan 2016 12:39:24 +0100 Subject: brcmfmac: fix sdio sg table alloc crash With commit 7d34b0560567 ("brcmfmac: Move all module parameters to one place") a bug was introduced causing a null pointer exception. This patch fixes the bug by initializing the sg table till after the settings have been initialized. Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") Reported-by: Marc Zyngier Tested-by: Marc Zyngier Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 40 ++++++++-------------- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++ .../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 1 + 3 files changed, 21 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index 53637399bb99..b98db8a0a069 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -879,11 +879,24 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn) return 0; } -static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) +void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) { + struct sdio_func *func; + struct mmc_host *host; + uint max_blocks; uint nents; int err; + func = sdiodev->func[2]; + host = func->card->host; + sdiodev->sg_support = host->max_segs > 1; + max_blocks = min_t(uint, host->max_blk_count, 511u); + sdiodev->max_request_size = min_t(uint, host->max_req_size, + max_blocks * func->cur_blksize); + sdiodev->max_segment_count = min_t(uint, host->max_segs, + SG_MAX_SINGLE_ALLOC); + sdiodev->max_segment_size = host->max_seg_size; + if (!sdiodev->sg_support) return; @@ -1021,9 +1034,6 @@ static void brcmf_sdiod_host_fixup(struct mmc_host *host) static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) { - struct sdio_func *func; - struct mmc_host *host; - uint max_blocks; int ret = 0; sdiodev->num_funcs = 2; @@ -1054,26 +1064,6 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) goto out; } - /* - * determine host related variables after brcmf_sdiod_probe() - * as func->cur_blksize is properly set and F2 init has been - * completed successfully. - */ - func = sdiodev->func[2]; - host = func->card->host; - sdiodev->sg_support = host->max_segs > 1; - max_blocks = min_t(uint, host->max_blk_count, 511u); - sdiodev->max_request_size = min_t(uint, host->max_req_size, - max_blocks * func->cur_blksize); - sdiodev->max_segment_count = min_t(uint, host->max_segs, - SG_MAX_SINGLE_ALLOC); - sdiodev->max_segment_size = host->max_seg_size; - - /* allocate scatter-gather table. sg support - * will be disabled upon allocation failure. - */ - brcmf_sdiod_sgtable_alloc(sdiodev); - ret = brcmf_sdiod_freezer_attach(sdiodev); if (ret) goto out; @@ -1084,7 +1074,7 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) ret = -ENODEV; goto out; } - brcmf_sdiod_host_fixup(host); + brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host); out: if (ret) brcmf_sdiod_remove(sdiodev); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index dd6614332836..a14d9d9da094 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4114,6 +4114,11 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) goto fail; } + /* allocate scatter-gather table. sg support + * will be disabled upon allocation failure. + */ + brcmf_sdiod_sgtable_alloc(bus->sdiodev); + /* Query the F2 block size, set roundup accordingly */ bus->blocksize = bus->sdiodev->func[2]->cur_blksize; bus->roundup = min(max_roundup, bus->blocksize); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h index 5ec7a6d87672..23f223150cef 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h @@ -342,6 +342,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, /* Issue an abort to the specified function */ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); +void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, enum brcmf_sdiod_state state); #ifdef CONFIG_PM_SLEEP -- cgit v1.2.3 From 5f2f3cad8b878b23f17a11dd5af4f4a2cc41c797 Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Mon, 18 Jan 2016 16:12:09 -0500 Subject: sunvnet: Initialize network_header and transport_header in vnet_rx_one() vnet_fullcsum() accesses ip_hdr() and transport header to compute the checksum for IPv4 packets, so these need to be initialized in skb created in vnet_rx_one(). Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index cc106d892e29..23fa29877f5b 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -389,17 +389,27 @@ static int vnet_rx_one(struct vnet_port *port, struct vio_net_desc *desc) if (vio_version_after_eq(&port->vio, 1, 8)) { struct vio_net_dext *dext = vio_net_ext(desc); + skb_reset_network_header(skb); + if (dext->flags & VNET_PKT_HCK_IPV4_HDRCKSUM) { if (skb->protocol == ETH_P_IP) { - struct iphdr *iph = (struct iphdr *)skb->data; + struct iphdr *iph = ip_hdr(skb); iph->check = 0; ip_send_check(iph); } } if ((dext->flags & VNET_PKT_HCK_FULLCKSUM) && - skb->ip_summed == CHECKSUM_NONE) - vnet_fullcsum(skb); + skb->ip_summed == CHECKSUM_NONE) { + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + int ihl = iph->ihl * 4; + + skb_reset_transport_header(skb); + skb_set_transport_header(skb, ihl); + vnet_fullcsum(skb); + } + } if (dext->flags & VNET_PKT_HCK_IPV4_HDRCKSUM_OK) { skb->ip_summed = CHECKSUM_PARTIAL; skb->csum_level = 0; -- cgit v1.2.3 From 81e8f2e930fe76b9814c71b9d87c30760b5eb705 Mon Sep 17 00:00:00 2001 From: Manfred Rudigier Date: Wed, 20 Jan 2016 11:22:28 +0100 Subject: net: dp83640: Fix tx timestamp overflow handling. PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by: Manfred Rudigier Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 180f69952779..7a240fce3a7e 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -846,6 +846,11 @@ static void decode_rxts(struct dp83640_private *dp83640, struct skb_shared_hwtstamps *shhwtstamps = NULL; struct sk_buff *skb; unsigned long flags; + u8 overflow; + + overflow = (phy_rxts->ns_hi >> 14) & 0x3; + if (overflow) + pr_debug("rx timestamp queue overflow, count %d\n", overflow); spin_lock_irqsave(&dp83640->rx_lock, flags); @@ -888,6 +893,7 @@ static void decode_txts(struct dp83640_private *dp83640, struct skb_shared_hwtstamps shhwtstamps; struct sk_buff *skb; u64 ns; + u8 overflow; /* We must already have the skb that triggered this. */ @@ -897,6 +903,17 @@ static void decode_txts(struct dp83640_private *dp83640, pr_debug("have timestamp but tx_queue empty\n"); return; } + + overflow = (phy_txts->ns_hi >> 14) & 0x3; + if (overflow) { + pr_debug("tx timestamp queue overflow, count %d\n", overflow); + while (skb) { + skb_complete_tx_timestamp(skb, NULL); + skb = skb_dequeue(&dp83640->tx_queue); + } + return; + } + ns = phy2txts(phy_txts); memset(&shhwtstamps, 0, sizeof(shhwtstamps)); shhwtstamps.hwtstamp = ns_to_ktime(ns); -- cgit v1.2.3 From ceb6560a4cf3a2667209e6869f4fb8f6da6ef55f Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 21 Jan 2016 10:42:31 +0530 Subject: net/irda: bfin_sir: remove duplicate defines The defconfig build of blackfin is failing with the error: arch/blackfin/include/asm/bfin_serial.h:269:0: warning: "port_membase" redefined drivers/net/irda/bfin_sir.h:85:0: note: this is the location of the previous definition arch/blackfin/include/asm/bfin_serial.h:382:0: warning: "get_lsr_cache" redefined drivers/net/irda/bfin_sir.h:86:0: note: this is the location of the previous definition arch/blackfin/include/asm/bfin_serial.h:383:0: warning: "put_lsr_cache" redefined drivers/net/irda/bfin_sir.h:87:0: note: this is the location of the previous definition port_membase, get_lsr_cache, put_lsr_cache are already defined in the architecture files, no need to define them again in the driver. Signed-off-by: Sudip Mukherjee Signed-off-by: David S. Miller --- drivers/net/irda/bfin_sir.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/irda/bfin_sir.h b/drivers/net/irda/bfin_sir.h index 29cbde8501ed..d47cf14bb4a5 100644 --- a/drivers/net/irda/bfin_sir.h +++ b/drivers/net/irda/bfin_sir.h @@ -82,9 +82,6 @@ struct bfin_sir_self { #define DRIVER_NAME "bfin_sir" -#define port_membase(port) (((struct bfin_sir_port *)(port))->membase) -#define get_lsr_cache(port) (((struct bfin_sir_port *)(port))->lsr) -#define put_lsr_cache(port, v) (((struct bfin_sir_port *)(port))->lsr = (v)) #include static const unsigned short per[][4] = { -- cgit v1.2.3 From d5c3d84657db57bd23ecd58b97f1c99dd42a7b80 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jan 2016 19:33:06 -0800 Subject: net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS Commit 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed a hunk in phy_state_machine() in the PHY_RUNNING case which was not needed. The change essentially makes the PHY library treat PHY devices with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even though the intent is not to do it. Fix this by reverting that specific hunk, which makes the PHY state machine wait for state changes, and stay in the PHY_RUNNING state for as long as needed. Fixes: 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 8763bb20988a..42b4c1eb7a90 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -905,10 +905,10 @@ void phy_state_machine(struct work_struct *work) phydev->adjust_link(phydev->attached_dev); break; case PHY_RUNNING: - /* Only register a CHANGE if we are polling or ignoring - * interrupts and link changed since latest checking. + /* Only register a CHANGE if we are polling and link changed + * since latest checking. */ - if (!phy_interrupt_is_valid(phydev)) { + if (phydev->irq == PHY_POLL) { old_link = phydev->link; err = phy_read_status(phydev); if (err) @@ -1000,8 +1000,13 @@ void phy_state_machine(struct work_struct *work) phy_state_to_str(old_state), phy_state_to_str(phydev->state)); - queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, - PHY_STATE_TIME * HZ); + /* Only re-schedule a PHY state machine change if we are polling the + * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving + * between states from phy_mac_interrupt() + */ + if (phydev->irq == PHY_POLL) + queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, + PHY_STATE_TIME * HZ); } void phy_mac_interrupt(struct phy_device *phydev, int new_link) -- cgit v1.2.3 From deccd16f91f930af8e91ffbbfc839d0ad8da999d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jan 2016 19:33:07 -0800 Subject: net: phy: Fix phy_mac_interrupt() Commit 5ea94e7686a3 ("phy: add phy_mac_interrupt()") to use with PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt() which is allowed to sleep, whereas phy_mac_interrupt() is expected to be callable from interrupt context. Now that we have fixed how the PHY state machine treats PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the new link state, and queue the PHY state machine for execution so it is going to read the new link state. For that to work properly, we need to update phy_change() not to try to invoke any interrupt callbacks if we have configured the PHY device for PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not required to implement those. Fixes: 5ea94e7686a3 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 42b4c1eb7a90..5590b9c182c9 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -692,25 +692,29 @@ void phy_change(struct work_struct *work) struct phy_device *phydev = container_of(work, struct phy_device, phy_queue); - if (phydev->drv->did_interrupt && - !phydev->drv->did_interrupt(phydev)) - goto ignore; + if (phy_interrupt_is_valid(phydev)) { + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + goto ignore; - if (phy_disable_interrupts(phydev)) - goto phy_err; + if (phy_disable_interrupts(phydev)) + goto phy_err; + } mutex_lock(&phydev->lock); if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) phydev->state = PHY_CHANGELINK; mutex_unlock(&phydev->lock); - atomic_dec(&phydev->irq_disable); - enable_irq(phydev->irq); + if (phy_interrupt_is_valid(phydev)) { + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); - /* Reenable interrupts */ - if (PHY_HALTED != phydev->state && - phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED)) - goto irq_enable_err; + /* Reenable interrupts */ + if (PHY_HALTED != phydev->state && + phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED)) + goto irq_enable_err; + } /* reschedule state queue work to run as soon as possible */ cancel_delayed_work_sync(&phydev->state_queue); @@ -1011,9 +1015,10 @@ void phy_state_machine(struct work_struct *work) void phy_mac_interrupt(struct phy_device *phydev, int new_link) { - cancel_work_sync(&phydev->phy_queue); phydev->link = new_link; - schedule_work(&phydev->phy_queue); + + /* Trigger a state machine change */ + queue_work(system_power_efficient_wq, &phydev->phy_queue); } EXPORT_SYMBOL(phy_mac_interrupt); -- cgit v1.2.3 From 49f7a471e4d172fc80140beccf6b3409b117b130 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jan 2016 19:33:08 -0800 Subject: net: bcmgenet: Properly configure PHY to ignore interrupt By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has long been allocated and registered. Overirring the PHY interrupt using the MDIO bus structure has no chance to work anymore, because of_mdiobus_register() has call phy_device_create() for use, which copied the MDIO bus address's irq for the PHY into the PHY device "irq" member. Since we do have a proper reference to a PHY device in bcmgenet_mii_probe(), just assign the desired IRQ value here. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 0d775964b060..457c3bc8cfff 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -401,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev) * Ethernet MAC ISRs */ if (priv->internal_phy) - priv->mii_bus->irq[phydev->mdio.addr] = PHY_IGNORE_INTERRUPT; + priv->phydev->irq = PHY_IGNORE_INTERRUPT; return 0; } -- cgit v1.2.3 From 35e2d1152b22eae99c961affbe85374bef05a775 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Wed, 20 Jan 2016 16:22:47 -0800 Subject: tunnels: Allow IPv6 UDP checksums to be correctly controlled. When configuring checksums on UDP tunnels, the flags are different for IPv4 vs. IPv6 (and reversed). However, when lightweight tunnels are enabled the flags used are always the IPv4 versions, which are ignored in the IPv6 code paths. This uses the correct IPv6 flags, so checksums can be controlled appropriately. Fixes: a725e514 ("vxlan: metadata based tunneling for IPv6") Fixes: abe492b4 ("geneve: UDP checksum configuration via netlink") Signed-off-by: Jesse Gross Acked-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/geneve.c | 4 ++-- drivers/net/vxlan.c | 23 ++++++++++++++++------- 2 files changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 7456569f53c1..0b14ac3b8d11 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -980,9 +980,9 @@ static netdev_tx_t geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, opts = ip_tunnel_info_opts(info); if (key->tun_flags & TUNNEL_CSUM) - flags |= GENEVE_F_UDP_CSUM; + flags &= ~GENEVE_F_UDP_ZERO_CSUM6_TX; else - flags &= ~GENEVE_F_UDP_CSUM; + flags |= GENEVE_F_UDP_ZERO_CSUM6_TX; err = geneve6_build_skb(dst, skb, key->tun_flags, vni, info->options_len, opts, diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 2d88c799d2ac..a85b1fcb3130 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1985,11 +1985,6 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, vxlan->cfg.port_max, true); if (info) { - if (info->key.tun_flags & TUNNEL_CSUM) - flags |= VXLAN_F_UDP_CSUM; - else - flags &= ~VXLAN_F_UDP_CSUM; - ttl = info->key.ttl; tos = info->key.tos; @@ -2004,8 +1999,15 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, goto drop; sk = vxlan->vn4_sock->sock->sk; - if (info && (info->key.tun_flags & TUNNEL_DONT_FRAGMENT)) - df = htons(IP_DF); + if (info) { + if (info->key.tun_flags & TUNNEL_DONT_FRAGMENT) + df = htons(IP_DF); + + if (info->key.tun_flags & TUNNEL_CSUM) + flags |= VXLAN_F_UDP_CSUM; + else + flags &= ~VXLAN_F_UDP_CSUM; + } memset(&fl4, 0, sizeof(fl4)); fl4.flowi4_oif = rdst ? rdst->remote_ifindex : 0; @@ -2101,6 +2103,13 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, return; } + if (info) { + if (info->key.tun_flags & TUNNEL_CSUM) + flags &= ~VXLAN_F_UDP_ZERO_CSUM6_TX; + else + flags |= VXLAN_F_UDP_ZERO_CSUM6_TX; + } + ttl = ttl ? : ip6_dst_hoplimit(ndst); err = vxlan6_xmit_skb(ndst, sk, skb, dev, &saddr, &dst->sin6.sin6_addr, 0, ttl, src_port, dst_port, htonl(vni << 8), md, -- cgit v1.2.3 From 48189d6aaf1ed1b382666289a94a50e5269a8946 Mon Sep 17 00:00:00 2001 From: yankejian Date: Wed, 20 Jan 2016 16:00:19 +0800 Subject: net: hns: enet specifies a reference to dsaf This patch replace the assoication between dsaf and enet from string matching to object reference. It requires the DTS to be updated within BIOS. Thanks god it can be done for all released boards. Signed-off-by: Kejian Yan Acked-by: Rob Herring Acked-by: Yisen Zhuang Signed-off-by: David S. Miller --- .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 5 +---- .../devicetree/bindings/net/hisilicon-hns-nic.txt | 7 ++++--- arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 19 +++++++++---------- drivers/net/ethernet/hisilicon/hns/hnae.c | 17 +++++++---------- drivers/net/ethernet/hisilicon/hns/hnae.h | 7 +++++-- drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 4 ++++ drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 10 +--------- drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h | 1 + drivers/net/ethernet/hisilicon/hns/hns_enet.c | 15 +++++++++------ drivers/net/ethernet/hisilicon/hns/hns_enet.h | 2 +- 10 files changed, 42 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt index 80411b2f0490..ecacfa44b1eb 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -4,8 +4,6 @@ Required properties: - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2". "hisilicon,hns-dsaf-v1" is for hip05. "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612. -- dsa-name: dsa fabric name who provide this interface. - should be "dsafX", X is the dsaf id. - mode: dsa fabric mode string. only support one of dsaf modes like these: "2port-64vf", "6port-16rss", @@ -26,9 +24,8 @@ Required properties: Example: -dsa: dsa@c7000000 { +dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; reg = <0x0 0xC0000000 0x0 0x420000 diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt index 41d19be7011e..e6a9d1c30878 100644 --- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt @@ -4,8 +4,9 @@ Required properties: - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2". "hisilicon,hns-nic-v1" is for hip05. "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612. -- ae-name: accelerator name who provides this interface, - is simply a name referring to the name of name in the accelerator node. +- ae-handle: accelerator engine handle for hns, + specifies a reference to the associating hardware driver node. + see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt - port-id: is the index of port provided by DSAF (the accelerator). DSAF can connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They are called debug ports. @@ -41,7 +42,7 @@ Example: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [a2 14 e4 4b 56 76]; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index da7b6e613257..933cba359918 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -23,9 +23,8 @@ soc0: soc@000000000 { }; }; - dsa: dsa@c7000000 { + dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; @@ -127,7 +126,7 @@ soc0: soc@000000000 { eth0: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [00 00 00 01 00 58]; status = "disabled"; @@ -135,14 +134,14 @@ soc0: soc@000000000 { }; eth1: ethernet@1{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <1>; status = "disabled"; dma-coherent; }; eth2: ethernet@2{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <2>; local-mac-address = [00 00 00 01 00 5a]; status = "disabled"; @@ -150,7 +149,7 @@ soc0: soc@000000000 { }; eth3: ethernet@3{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <3>; local-mac-address = [00 00 00 01 00 5b]; status = "disabled"; @@ -158,7 +157,7 @@ soc0: soc@000000000 { }; eth4: ethernet@4{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <4>; local-mac-address = [00 00 00 01 00 5c]; status = "disabled"; @@ -166,7 +165,7 @@ soc0: soc@000000000 { }; eth5: ethernet@5{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <5>; local-mac-address = [00 00 00 01 00 5d]; status = "disabled"; @@ -174,7 +173,7 @@ soc0: soc@000000000 { }; eth6: ethernet@6{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <6>; local-mac-address = [00 00 00 01 00 5e]; status = "disabled"; @@ -182,7 +181,7 @@ soc0: soc@000000000 { }; eth7: ethernet@7{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <7>; local-mac-address = [00 00 00 01 00 5f]; status = "disabled"; diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c index b3645297477e..3bfe36f9405b 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.c +++ b/drivers/net/ethernet/hisilicon/hns/hnae.c @@ -95,21 +95,17 @@ static struct hnae_buf_ops hnae_bops = { static int __ae_match(struct device *dev, const void *data) { struct hnae_ae_dev *hdev = cls_to_ae_dev(dev); - const char *ae_id = data; - if (!strncmp(ae_id, hdev->name, AE_NAME_SIZE)) - return 1; - - return 0; + return hdev->dev->of_node == data; } -static struct hnae_ae_dev *find_ae(const char *ae_id) +static struct hnae_ae_dev *find_ae(const struct device_node *ae_node) { struct device *dev; - WARN_ON(!ae_id); + WARN_ON(!ae_node); - dev = class_find_device(hnae_class, NULL, ae_id, __ae_match); + dev = class_find_device(hnae_class, NULL, ae_node, __ae_match); return dev ? cls_to_ae_dev(dev) : NULL; } @@ -316,7 +312,8 @@ EXPORT_SYMBOL(hnae_reinit_handle); * return handle ptr or ERR_PTR */ struct hnae_handle *hnae_get_handle(struct device *owner_dev, - const char *ae_id, u32 port_id, + const struct device_node *ae_node, + u32 port_id, struct hnae_buf_ops *bops) { struct hnae_ae_dev *dev; @@ -324,7 +321,7 @@ struct hnae_handle *hnae_get_handle(struct device *owner_dev, int i, j; int ret; - dev = find_ae(ae_id); + dev = find_ae(ae_node); if (!dev) return ERR_PTR(-ENODEV); diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.h b/drivers/net/ethernet/hisilicon/hns/hnae.h index 6ca94dc3dda3..1cbcb9fa3fb5 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.h +++ b/drivers/net/ethernet/hisilicon/hns/hnae.h @@ -524,8 +524,11 @@ struct hnae_handle { #define ring_to_dev(ring) ((ring)->q->dev->dev) -struct hnae_handle *hnae_get_handle(struct device *owner_dev, const char *ae_id, - u32 port_id, struct hnae_buf_ops *bops); +struct hnae_handle *hnae_get_handle(struct device *owner_dev, + const struct device_node *ae_node, + u32 port_id, + struct hnae_buf_ops *bops); + void hnae_put_handle(struct hnae_handle *handle); int hnae_ae_register(struct hnae_ae_dev *dev, struct module *owner); void hnae_ae_unregister(struct hnae_ae_dev *dev); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c index 522b264866b4..a0070d0e740d 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c @@ -847,6 +847,7 @@ static struct hnae_ae_ops hns_dsaf_ops = { int hns_dsaf_ae_init(struct dsaf_device *dsaf_dev) { struct hnae_ae_dev *ae_dev = &dsaf_dev->ae_dev; + static atomic_t id = ATOMIC_INIT(-1); switch (dsaf_dev->dsaf_ver) { case AE_VERSION_1: @@ -858,6 +859,9 @@ int hns_dsaf_ae_init(struct dsaf_device *dsaf_dev) default: break; } + + snprintf(ae_dev->name, AE_NAME_SIZE, "%s%d", DSAF_DEVICE_NAME, + (int)atomic_inc_return(&id)); ae_dev->ops = &hns_dsaf_ops; ae_dev->dev = dsaf_dev->dev; diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c index 1c33bd06bd5c..9439f04962e1 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c @@ -35,7 +35,7 @@ int hns_dsaf_get_cfg(struct dsaf_device *dsaf_dev) int ret, i; u32 desc_num; u32 buf_size; - const char *name, *mode_str; + const char *mode_str; struct device_node *np = dsaf_dev->dev->of_node; if (of_device_is_compatible(np, "hisilicon,hns-dsaf-v1")) @@ -43,14 +43,6 @@ int hns_dsaf_get_cfg(struct dsaf_device *dsaf_dev) else dsaf_dev->dsaf_ver = AE_VERSION_2; - ret = of_property_read_string(np, "dsa_name", &name); - if (ret) { - dev_err(dsaf_dev->dev, "get dsaf name fail, ret=%d!\n", ret); - return ret; - } - strncpy(dsaf_dev->ae_dev.name, name, AE_NAME_SIZE); - dsaf_dev->ae_dev.name[AE_NAME_SIZE - 1] = '\0'; - ret = of_property_read_string(np, "mode", &mode_str); if (ret) { dev_err(dsaf_dev->dev, "get dsaf mode fail, ret=%d!\n", ret); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h index 31c312f9826e..40205b910f80 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.h @@ -18,6 +18,7 @@ struct hns_mac_cb; #define DSAF_DRV_NAME "hns_dsaf" #define DSAF_MOD_VERSION "v1.0" +#define DSAF_DEVICE_NAME "dsaf" #define HNS_DSAF_DEBUG_NW_REG_OFFSET 0x100000 diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 0e30846a24f8..3f77ff77abbc 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -1802,7 +1802,7 @@ static int hns_nic_try_get_ae(struct net_device *ndev) int ret; h = hnae_get_handle(&priv->netdev->dev, - priv->ae_name, priv->port_id, NULL); + priv->ae_node, priv->port_id, NULL); if (IS_ERR_OR_NULL(h)) { ret = PTR_ERR(h); dev_dbg(priv->dev, "has not handle, register notifier!\n"); @@ -1880,13 +1880,16 @@ static int hns_nic_dev_probe(struct platform_device *pdev) else priv->enet_ver = AE_VERSION_2; - ret = of_property_read_string(node, "ae-name", &priv->ae_name); - if (ret) - goto out_read_string_fail; + priv->ae_node = (void *)of_parse_phandle(node, "ae-handle", 0); + if (IS_ERR_OR_NULL(priv->ae_node)) { + ret = PTR_ERR(priv->ae_node); + dev_err(dev, "not find ae-handle\n"); + goto out_read_prop_fail; + } ret = of_property_read_u32(node, "port-id", &priv->port_id); if (ret) - goto out_read_string_fail; + goto out_read_prop_fail; hns_init_mac_addr(ndev); @@ -1945,7 +1948,7 @@ static int hns_nic_dev_probe(struct platform_device *pdev) out_notify_fail: (void)cancel_work_sync(&priv->service_task); -out_read_string_fail: +out_read_prop_fail: free_netdev(ndev); return ret; } diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.h b/drivers/net/ethernet/hisilicon/hns/hns_enet.h index 4b75270f014e..c68ab3d34fc2 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.h @@ -51,7 +51,7 @@ struct hns_nic_ops { }; struct hns_nic_priv { - const char *ae_name; + const struct device_node *ae_node; u32 enet_ver; u32 port_id; int phy_mode; -- cgit v1.2.3 From 2c832293e09be2f998ea916650927c8ccd5b4b3b Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 20 Jan 2016 16:36:25 +0800 Subject: net: mvneta: fix trivial cut-off issue in mvneta_ethtool_update_stats When s->type is T_REG_64, the high 32bits are lost in val. This patch fixes this trivial issue. Signed-off-by: Jisheng Zhang Fixes: 9b0cdefa4cd5 ("net: mvneta: add ethtool statistics") Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index fabc8df40392..4a8ed5bc3140 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3242,26 +3242,25 @@ static void mvneta_ethtool_update_stats(struct mvneta_port *pp) const struct mvneta_statistic *s; void __iomem *base = pp->base; u32 high, low, val; + u64 val64; int i; for (i = 0, s = mvneta_statistics; s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics); s++, i++) { - val = 0; - switch (s->type) { case T_REG_32: val = readl_relaxed(base + s->offset); + pp->ethtool_stats[i] += val; break; case T_REG_64: /* Docs say to read low 32-bit then high */ low = readl_relaxed(base + s->offset); high = readl_relaxed(base + s->offset + 4); - val = (u64)high << 32 | low; + val64 = (u64)high << 32 | low; + pp->ethtool_stats[i] += val64; break; } - - pp->ethtool_stats[i] += val; } } -- cgit v1.2.3 From 0e03f563a04207cc8e5db6afe63309a585995de7 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 20 Jan 2016 19:27:22 +0800 Subject: net: mvneta: sort the headers in alphabetic order Sorting the headers in alphabetic order will help to reduce the conflict when adding new headers in the future. Signed-off-by: Jisheng Zhang Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 4a8ed5bc3140..07d837dc39de 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -11,28 +11,28 @@ * warranty of any kind, whether express or implied. */ -#include -#include +#include +#include #include -#include -#include +#include #include -#include -#include #include -#include -#include -#include #include -#include +#include +#include +#include +#include #include +#include #include #include #include -#include #include -#include -#include +#include +#include +#include +#include +#include /* Registers */ #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) -- cgit v1.2.3 From 2804ba4edef5b4de01d4c580eb9ab4000f822a53 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 20 Jan 2016 19:27:23 +0800 Subject: net: mvneta: Try to get named core clock first Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. To support for more than one clock, we'll need to distinguish between the clock by name. Change clock probing to first try to get "core" clock before falling back to unnamed clock. Signed-off-by: Jisheng Zhang Acked-by: Thomas Petazzoni Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 07d837dc39de..406705580a33 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3604,7 +3604,9 @@ static int mvneta_probe(struct platform_device *pdev) pp->indir[0] = rxq_def; - pp->clk = devm_clk_get(&pdev->dev, NULL); + pp->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(pp->clk)) + pp->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pp->clk)) { err = PTR_ERR(pp->clk); goto err_put_phy_node; -- cgit v1.2.3 From 15cc4a4a99ebfbbb696e85dca30680b522811a44 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 20 Jan 2016 19:27:24 +0800 Subject: net: mvneta: get optional bus clk Some platforms may provide more than one clk for the mvneta IP, for example Marvell BG4CT provides one clk for the mac core, and one clk for the AXI bus logic. Obviously this bus clk also need to be enabled. This patch adds this optional "bus" clk support. Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 406705580a33..662c2ee268c7 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -373,6 +373,8 @@ struct mvneta_port { /* Core clock */ struct clk *clk; + /* AXI clock */ + struct clk *clk_bus; u8 mcast_count[256]; u16 tx_ring_size; u16 rx_ring_size; @@ -3614,6 +3616,10 @@ static int mvneta_probe(struct platform_device *pdev) clk_prepare_enable(pp->clk); + pp->clk_bus = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR(pp->clk_bus)) + clk_prepare_enable(pp->clk_bus); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pp->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pp->base)) { @@ -3725,6 +3731,7 @@ err_free_stats: err_free_ports: free_percpu(pp->ports); err_clk: + clk_disable_unprepare(pp->clk_bus); clk_disable_unprepare(pp->clk); err_put_phy_node: of_node_put(phy_node); @@ -3742,6 +3749,7 @@ static int mvneta_remove(struct platform_device *pdev) struct mvneta_port *pp = netdev_priv(dev); unregister_netdev(dev); + clk_disable_unprepare(pp->clk_bus); clk_disable_unprepare(pp->clk); free_percpu(pp->ports); free_percpu(pp->stats); -- cgit v1.2.3 From 0a9c453eef65fed569757e21423400cfcd55e206 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Wed, 20 Jan 2016 13:40:35 +0100 Subject: net: phy: smsc: Fix disabling energy detect mode When the lan87xx_read_status function is getting called the energy detect mode is enabled again even if it has been disabled by device tree. Added private struct to check the energy detect status. Signed-off-by: Teresa Remmet Signed-off-by: David S. Miller --- drivers/net/phy/smsc.c | 54 ++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 44 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index e485f2653c82..2e21e9366f76 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -24,6 +24,10 @@ #include #include +struct smsc_phy_priv { + bool energy_enable; +}; + static int smsc_phy_config_intr(struct phy_device *phydev) { int rc = phy_write (phydev, MII_LAN83C185_IM, @@ -43,19 +47,14 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev) static int smsc_phy_config_init(struct phy_device *phydev) { - int __maybe_unused len; - struct device *dev __maybe_unused = &phydev->mdio.dev; - struct device_node *of_node __maybe_unused = dev->of_node; + struct smsc_phy_priv *priv = phydev->priv; + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); - int enable_energy = 1; if (rc < 0) return rc; - if (of_find_property(of_node, "smsc,disable-energy-detect", &len)) - enable_energy = 0; - - if (enable_energy) { + if (priv->energy_enable) { /* Enable energy detect mode for this SMSC Transceivers */ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc | MII_LAN83C185_EDPWRDOWN); @@ -110,10 +109,13 @@ static int lan911x_config_init(struct phy_device *phydev) */ static int lan87xx_read_status(struct phy_device *phydev) { + struct smsc_phy_priv *priv = phydev->priv; + int err = genphy_read_status(phydev); - int i; - if (!phydev->link) { + if (!phydev->link && priv->energy_enable) { + int i; + /* Disable EDPD to wake up PHY */ int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); if (rc < 0) @@ -149,6 +151,26 @@ static int lan87xx_read_status(struct phy_device *phydev) return err; } +static int smsc_phy_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct device_node *of_node = dev->of_node; + struct smsc_phy_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->energy_enable = true; + + if (of_property_read_bool(of_node, "smsc,disable-energy-detect")) + priv->energy_enable = false; + + phydev->priv = priv; + + return 0; +} + static struct phy_driver smsc_phy_driver[] = { { .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ @@ -159,6 +181,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -180,6 +204,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -201,6 +227,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = lan87xx_read_status, @@ -222,6 +250,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -242,6 +272,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = lan87xx_read_status, @@ -263,6 +295,8 @@ static struct phy_driver smsc_phy_driver[] = { | SUPPORTED_Asym_Pause), .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG, + .probe = smsc_phy_probe, + /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = lan87xx_read_status, -- cgit v1.2.3 From 7b08c67fa5ae66c2d07fd506de57de67b7a7e5d6 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Thu, 21 Jan 2016 11:18:34 +0200 Subject: iwlwifi: add new 3168 series devices support Add new sub-system PCI IDs to the 3168 series. Added 0x2010, 0x2050 and 0x2150 sub-system IDs. Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 6261a68cae90..944e88ab13a8 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -378,7 +378,10 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x3165, 0x8110, iwl3165_2ac_cfg)}, /* 3168 Series */ + {IWL_PCI_DEVICE(0x24FB, 0x2010, iwl3168_2ac_cfg)}, {IWL_PCI_DEVICE(0x24FB, 0x2110, iwl3168_2ac_cfg)}, + {IWL_PCI_DEVICE(0x24FB, 0x2050, iwl3168_2ac_cfg)}, + {IWL_PCI_DEVICE(0x24FB, 0x2150, iwl3168_2ac_cfg)}, {IWL_PCI_DEVICE(0x24FB, 0x0000, iwl3168_2ac_cfg)}, /* 7265 Series */ -- cgit v1.2.3 From 9baa03982b06a62ac817b4983f2da7ca66d4f331 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Thu, 21 Jan 2016 11:11:11 +0200 Subject: iwlwifi: add device ID for 8265 Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 944e88ab13a8..00335ea6b3eb 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -478,6 +478,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x24F3, 0x0000, iwl8265_2ac_cfg)}, {IWL_PCI_DEVICE(0x24FD, 0x0010, iwl8265_2ac_cfg)}, {IWL_PCI_DEVICE(0x24FD, 0x8010, iwl8265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x24FD, 0x0810, iwl8265_2ac_cfg)}, /* 9000 Series */ {IWL_PCI_DEVICE(0x9DF0, 0x2A10, iwl5165_2ac_cfg)}, -- cgit v1.2.3 From b5d7a06906a4875524f5c61c0b312828bf6737de Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Thu, 21 Jan 2016 16:07:41 -0800 Subject: drivers: net: xgene: fix extra IRQ issue For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt may be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line, as suggested by, 'commit e9849777d0e2 ("genirq: Add flag to force mask in disable_irq[_nosync]()")' Signed-off-by: Iyappan Subramanian Tested-by: Toan Le Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 12 +++++++++--- drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 1 + 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index a4799c1fc7d4..5eb9b20c0eea 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -628,6 +628,7 @@ static int xgene_enet_register_irq(struct net_device *ndev) int ret; ring = pdata->rx_ring; + irq_set_status_flags(ring->irq, IRQ_DISABLE_UNLAZY); ret = devm_request_irq(dev, ring->irq, xgene_enet_rx_irq, IRQF_SHARED, ring->irq_name, ring); if (ret) @@ -635,6 +636,7 @@ static int xgene_enet_register_irq(struct net_device *ndev) if (pdata->cq_cnt) { ring = pdata->tx_ring->cp_ring; + irq_set_status_flags(ring->irq, IRQ_DISABLE_UNLAZY); ret = devm_request_irq(dev, ring->irq, xgene_enet_rx_irq, IRQF_SHARED, ring->irq_name, ring); if (ret) { @@ -649,15 +651,19 @@ static int xgene_enet_register_irq(struct net_device *ndev) static void xgene_enet_free_irq(struct net_device *ndev) { struct xgene_enet_pdata *pdata; + struct xgene_enet_desc_ring *ring; struct device *dev; pdata = netdev_priv(ndev); dev = ndev_to_dev(ndev); - devm_free_irq(dev, pdata->rx_ring->irq, pdata->rx_ring); + ring = pdata->rx_ring; + irq_clear_status_flags(ring->irq, IRQ_DISABLE_UNLAZY); + devm_free_irq(dev, ring->irq, ring); if (pdata->cq_cnt) { - devm_free_irq(dev, pdata->tx_ring->cp_ring->irq, - pdata->tx_ring->cp_ring); + ring = pdata->tx_ring->cp_ring; + irq_clear_status_flags(ring->irq, IRQ_DISABLE_UNLAZY); + devm_free_irq(dev, ring->irq, ring); } } diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h index 70d5b62c125a..248dfc40a761 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 9a368aff9cb370298fa02feeffa861f2db497c18 Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Fri, 22 Jan 2016 01:39:43 +0100 Subject: pptp: fix illegal memory access caused by multiple bind()s Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov Cc: Sasha Levin Cc: Dmitry Vyukov Reported-by: Dmitry Vyukov Cc: Dave Jones Reported-by: Dave Jones Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ppp/pptp.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 90868ca5e341..ae0905ed4a32 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -129,24 +129,27 @@ static int lookup_chan_dst(u16 call_id, __be32 d_addr) return i < MAX_CALLID; } -static int add_chan(struct pppox_sock *sock) +static int add_chan(struct pppox_sock *sock, + struct pptp_addr *sa) { static int call_id; spin_lock(&chan_lock); - if (!sock->proto.pptp.src_addr.call_id) { + if (!sa->call_id) { call_id = find_next_zero_bit(callid_bitmap, MAX_CALLID, call_id + 1); if (call_id == MAX_CALLID) { call_id = find_next_zero_bit(callid_bitmap, MAX_CALLID, 1); if (call_id == MAX_CALLID) goto out_err; } - sock->proto.pptp.src_addr.call_id = call_id; - } else if (test_bit(sock->proto.pptp.src_addr.call_id, callid_bitmap)) + sa->call_id = call_id; + } else if (test_bit(sa->call_id, callid_bitmap)) { goto out_err; + } - set_bit(sock->proto.pptp.src_addr.call_id, callid_bitmap); - rcu_assign_pointer(callid_sock[sock->proto.pptp.src_addr.call_id], sock); + sock->proto.pptp.src_addr = *sa; + set_bit(sa->call_id, callid_bitmap); + rcu_assign_pointer(callid_sock[sa->call_id], sock); spin_unlock(&chan_lock); return 0; @@ -416,7 +419,6 @@ static int pptp_bind(struct socket *sock, struct sockaddr *uservaddr, struct sock *sk = sock->sk; struct sockaddr_pppox *sp = (struct sockaddr_pppox *) uservaddr; struct pppox_sock *po = pppox_sk(sk); - struct pptp_opt *opt = &po->proto.pptp; int error = 0; if (sockaddr_len < sizeof(struct sockaddr_pppox)) @@ -424,10 +426,22 @@ static int pptp_bind(struct socket *sock, struct sockaddr *uservaddr, lock_sock(sk); - opt->src_addr = sp->sa_addr.pptp; - if (add_chan(po)) + if (sk->sk_state & PPPOX_DEAD) { + error = -EALREADY; + goto out; + } + + if (sk->sk_state & PPPOX_BOUND) { error = -EBUSY; + goto out; + } + + if (add_chan(po, &sp->sa_addr.pptp)) + error = -EBUSY; + else + sk->sk_state |= PPPOX_BOUND; +out: release_sock(sk); return error; } @@ -498,7 +512,7 @@ static int pptp_connect(struct socket *sock, struct sockaddr *uservaddr, } opt->dst_addr = sp->sa_addr.pptp; - sk->sk_state = PPPOX_CONNECTED; + sk->sk_state |= PPPOX_CONNECTED; end: release_sock(sk); -- cgit v1.2.3 From 262c741e0825b29447a9e53b6582afd6b14c3706 Mon Sep 17 00:00:00 2001 From: Eli Cooper Date: Mon, 18 Jan 2016 19:30:19 +0800 Subject: rt2x00: fix monitor mode regression Since commit df1404650ccb ("mac80211: remove support for IFF_PROMISC") monitor mode for rt2x00 has been made effectively useless because the hardware filter is configured to drop packets whose intended recipient is not the device, regardless of the presence of monitor mode interfaces. This patch fixes this regression by adding explicit monitor mode support, and by configuring the hardware filter accordingly. Signed-off-by: Eli Cooper Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo --- drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 4 +++- drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 4 +++- drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 4 +++- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 + drivers/net/wireless/ralink/rt2x00/rt2x00config.c | 5 +++++ drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 5 ----- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 4 +++- drivers/net/wireless/ralink/rt2x00/rt73usb.c | 4 +++- 9 files changed, 23 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c index 9a3966cd6fbe..155f343981fe 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c @@ -273,8 +273,10 @@ static void rt2400pci_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field32(®, RXCSR0_DROP_TODS, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) && !rt2x00dev->intf_ap_count); rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c index 1a6740b4d396..2553cdd74066 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c @@ -274,8 +274,10 @@ static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field32(®, RXCSR0_DROP_TODS, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) && !rt2x00dev->intf_ap_count); rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); rt2x00_set_field32(®, RXCSR0_DROP_MCAST, diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c index d26018f30b7d..2d64611de300 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c @@ -437,8 +437,10 @@ static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, !(filter_flags & FIF_CONTROL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) && !rt2x00dev->intf_ap_count); rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index 9733b31a780d..a26afcab03ed 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -1490,7 +1490,8 @@ void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_FCSFAIL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h index 3282ddb766f4..26427140a963 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h @@ -669,6 +669,7 @@ enum rt2x00_state_flags { CONFIG_POWERSAVING, CONFIG_HT_DISABLED, CONFIG_QOS_DISABLED, + CONFIG_MONITORING, /* * Mark we currently are sequentially reading TX_STA_FIFO register diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c index 7e8bb1198ae9..6a1f508d472f 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c @@ -277,6 +277,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, else clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); + if (conf->flags & IEEE80211_CONF_MONITOR) + set_bit(CONFIG_MONITORING, &rt2x00dev->flags); + else + clear_bit(CONFIG_MONITORING, &rt2x00dev->flags); + rt2x00dev->curr_band = conf->chandef.chan->band; rt2x00dev->curr_freq = conf->chandef.chan->center_freq; rt2x00dev->tx_power = conf->power_level; diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c index 3c26ee65a415..13da95a24cf7 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c @@ -385,11 +385,6 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, *total_flags |= FIF_PSPOLL; } - /* - * Check if there is any work left for us. - */ - if (rt2x00dev->packet_filter == *total_flags) - return; rt2x00dev->packet_filter = *total_flags; rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c index c0e730ea1b69..24a3436ef952 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c +++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c @@ -530,8 +530,10 @@ static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) && !rt2x00dev->intf_ap_count); rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c index 7081e13b4fd6..7bbc86931168 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c +++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c @@ -480,8 +480,10 @@ static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_PLCPFAIL)); rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags)); rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, + !test_bit(CONFIG_MONITORING, &rt2x00dev->flags) && !rt2x00dev->intf_ap_count); rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, -- cgit v1.2.3 From c72fc9093718a3f8597249863a1bac345ba00859 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 20 Jan 2016 21:58:39 -0600 Subject: rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded Recently, it has been reported that D-Link DWA-582 cards, which use an RTL8812AE chip are not able to scan for 5G networks. The problems started with kernel 4.2, which is the first version that had commit d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information"). With this patch, the driver went from setting a default channel plan to using the value derived from EEPROM. Bug reports at https://bugzilla.kernel.org/show_bug.cgi?id=111031 and https://bugzilla.redhat.com/show_bug.cgi?id=1279653 are examples of this problem. The problem was solved once I learned that the internal country code was resulting in a regulatory set with only 2.4 GHz channels. With the RTL8821AE chips available to me, the country code was such that both 2.4 and 5 GHz channels are allowed. The fix is to allow both bands even when the EEPROM is incorrectly encoded. Fixes: d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information") Signed-off-by: Larry Finger Cc: littlesmartguy@gmail.com Cc: gabe@codehaus.org Cc: Stable [v4.2+] Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/regd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtlwifi/regd.c b/drivers/net/wireless/realtek/rtlwifi/regd.c index a62bf0a65c32..5be34118e0af 100644 --- a/drivers/net/wireless/realtek/rtlwifi/regd.c +++ b/drivers/net/wireless/realtek/rtlwifi/regd.c @@ -351,7 +351,6 @@ static const struct ieee80211_regdomain *_rtl_regdomain_select( case COUNTRY_CODE_SPAIN: case COUNTRY_CODE_FRANCE: case COUNTRY_CODE_ISRAEL: - case COUNTRY_CODE_WORLD_WIDE_13: return &rtl_regdom_12_13; case COUNTRY_CODE_MKK: case COUNTRY_CODE_MKK1: @@ -360,6 +359,7 @@ static const struct ieee80211_regdomain *_rtl_regdomain_select( return &rtl_regdom_14_60_64; case COUNTRY_CODE_GLOBAL_DOMAIN: return &rtl_regdom_14; + case COUNTRY_CODE_WORLD_WIDE_13: case COUNTRY_CODE_WORLD_WIDE_13_5G_ALL: return &rtl_regdom_12_13_5g_all; default: -- cgit v1.2.3 From 65dc1a5d1efb0ec54ffb715468070890d27d63fc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 21 Jan 2016 16:34:08 +0100 Subject: ath9k_hw: ignore eeprom magic mismatch on flash based devices Many AR913x based devices (maybe others too) do not have a valid EEPROM magic in their calibration data partition. Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping") Signed-off-by: Felix Fietkau Acked-by: Martin Blumenstingl Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/eeprom.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c index a7afdeee698c..73fb4232f9f2 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.c +++ b/drivers/net/wireless/ath/ath9k/eeprom.c @@ -150,18 +150,18 @@ int ath9k_hw_nvram_swap_data(struct ath_hw *ah, bool *swap_needed, int size) return -EIO; } - if (magic == AR5416_EEPROM_MAGIC) { - *swap_needed = false; - } else if (swab16(magic) == AR5416_EEPROM_MAGIC) { + *swap_needed = false; + if (swab16(magic) == AR5416_EEPROM_MAGIC) { if (ah->ah_flags & AH_NO_EEP_SWAP) { ath_info(common, "Ignoring endianness difference in EEPROM magic bytes.\n"); - - *swap_needed = false; } else { *swap_needed = true; } - } else { + } else if (magic != AR5416_EEPROM_MAGIC) { + if (ath9k_hw_use_flash(ah)) + return 0; + ath_err(common, "Invalid EEPROM Magic (0x%04x).\n", magic); return -EINVAL; -- cgit v1.2.3 From 426f04684b30ced3632b29b41cb5c97dca500dca Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Sun, 24 Jan 2016 00:56:19 +0200 Subject: 82xx: FCC: Fixing a bug causing to FCC port lock-up (second try) This is an additional patch to the one already submitted recently. The previous patch was not complete, and the FCC port lock-up scenario has been reproduced in lab. I had an opportunity to check the current patch in lab and the FCC port lock no longer freezes, while the previous patch still locks-up the FCC port. The current patch fixes a pointer arithmetic bug (second bug in the same line), which leads FCC port lock-up during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fs_enet/mac-fcc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c index 52e0091b4fb2..1ba359f17ec6 100644 --- a/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c +++ b/drivers/net/ethernet/freescale/fs_enet/mac-fcc.c @@ -552,7 +552,7 @@ static void tx_restart(struct net_device *dev) cbd_t __iomem *prev_bd; cbd_t __iomem *last_tx_bd; - last_tx_bd = fep->tx_bd_base + ((fpi->tx_ring - 1) * sizeof(cbd_t)); + last_tx_bd = fep->tx_bd_base + (fpi->tx_ring - 1); /* get the current bd held in TBPTR and scan back from this point */ recheck_bd = curr_tbptr = (cbd_t __iomem *) -- cgit v1.2.3 From db0e51afa481088e6396f11e02018d64113a6578 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 09:22:05 +0000 Subject: net: dsa: fix mv88e6xxx switches Since commit 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops"), the Marvell 88E6xxx switch has been unable to pass traffic between ports - any received traffic is discarded by the switch. Taking a port out of bridge mode and configuring a vlan on it also the port to start passing traffic. With the debugfs files re-instated to allow debug of this issue by comparing the register settings between the working and non-working case, the reason becomes clear: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 - 7: 1111 707f 2001 2 2 2 2 2 0 2 + 7: 1111 707f 2001 1 1 1 1 1 0 1 Register 7 for the ports is the default vlan tag register, and in the non-working setup, it has been set to 2, despite vlan 2 not being configured. This causes the switch to drop all packets coming in to these ports. The working setup has the default vlan tag register set to 1, which is the default vlan when none is configured. Inspection of the code reveals why. The code prior to this commit was: - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... - if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID) - err = ds->drv->port_pvid_set(ds, p->port, vid); but the new code is: + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... + } ... + if (pvid) + err = _mv88e6xxx_port_pvid_set(ds, port, vid); This causes the new code to always set the default vlan to one higher than the old code. Fix this. Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops") Cc: Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 9fe33fc3c2b9..9cc73bf0a081 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1532,7 +1532,7 @@ int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, /* no PVID with ranges, otherwise it's a bug */ if (pvid) - err = _mv88e6xxx_port_pvid_set(ds, port, vid); + err = _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end); unlock: mutex_unlock(&ps->smi_mutex); -- cgit v1.2.3 From 5cfa30397bc3677250a3e71aebde7b40ecb2b25a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 Jan 2016 16:52:37 +0100 Subject: net: fec: make driver endian-safe The driver treats the device descriptors as CPU-endian, which appears to be correct with the default endianness on both ARM (typically LE) and PowerPC (typically BE) SoCs, indicating that the hardware block is generated differently. Add endianness annotations and byteswaps as necessary. It's not clear that the ifdef there really is correct and shouldn't just be #ifdef CONFIG_ARM, but I also can't test on anything but the i.MX6 HummingBoard where this gets it working with a BE kernel. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/Makefile | 3 + drivers/net/ethernet/freescale/fec.h | 40 ++++++--- drivers/net/ethernet/freescale/fec_main.c | 130 ++++++++++++++++-------------- 3 files changed, 101 insertions(+), 72 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile index 4097c58d17a7..cbe21dc7e37e 100644 --- a/drivers/net/ethernet/freescale/Makefile +++ b/drivers/net/ethernet/freescale/Makefile @@ -4,6 +4,9 @@ obj-$(CONFIG_FEC) += fec.o fec-objs :=fec_main.o fec_ptp.o +CFLAGS_fec_main.o := -D__CHECK_ENDIAN__ +CFLAGS_fec_ptp.o := -D__CHECK_ENDIAN__ + obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 99d33e2d35e6..7dd47a0b8cfb 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -190,28 +190,46 @@ /* * Define the buffer descriptor structure. + * + * Evidently, ARM SoCs have the FEC block generated in a + * little endian mode; or at least ARCH_MXC/SOC_IMX28 do, + * so adjust endianness accordingly. */ #if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) +#define fec32_to_cpu le32_to_cpu +#define fec16_to_cpu le16_to_cpu +#define cpu_to_fec32 cpu_to_le32 +#define cpu_to_fec16 cpu_to_le16 +#define __fec32 __le32 +#define __fec16 __le16 + struct bufdesc { - unsigned short cbd_datlen; /* Data length */ - unsigned short cbd_sc; /* Control and status info */ - unsigned long cbd_bufaddr; /* Buffer address */ + __fec16 cbd_datlen; /* Data length */ + __fec16 cbd_sc; /* Control and status info */ + __fec32 cbd_bufaddr; /* Buffer address */ }; #else +#define fec32_to_cpu be32_to_cpu +#define fec16_to_cpu be16_to_cpu +#define cpu_to_fec32 cpu_to_be32 +#define cpu_to_fec16 cpu_to_be16 +#define __fec32 __be32 +#define __fec16 __be16 + struct bufdesc { - unsigned short cbd_sc; /* Control and status info */ - unsigned short cbd_datlen; /* Data length */ - unsigned long cbd_bufaddr; /* Buffer address */ + __fec16 cbd_sc; /* Control and status info */ + __fec16 cbd_datlen; /* Data length */ + __fec32 cbd_bufaddr; /* Buffer address */ }; #endif struct bufdesc_ex { struct bufdesc desc; - unsigned long cbd_esc; - unsigned long cbd_prot; - unsigned long cbd_bdu; - unsigned long ts; - unsigned short res0[4]; + __fec32 cbd_esc; + __fec32 cbd_prot; + __fec32 cbd_bdu; + __fec32 ts; + __fec16 res0[4]; }; /* diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 502da6f48f95..3f3b9eacc286 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -332,11 +332,13 @@ static void fec_dump(struct net_device *ndev) bdp = txq->tx_bd_base; do { - pr_info("%3u %c%c 0x%04x 0x%08lx %4u %p\n", + pr_info("%3u %c%c 0x%04x 0x%08x %4u %p\n", index, bdp == txq->cur_tx ? 'S' : ' ', bdp == txq->dirty_tx ? 'H' : ' ', - bdp->cbd_sc, bdp->cbd_bufaddr, bdp->cbd_datlen, + fec16_to_cpu(bdp->cbd_sc), + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), txq->tx_skbuff[index]); bdp = fec_enet_get_nextdesc(bdp, fep, 0); index++; @@ -389,7 +391,7 @@ fec_enet_txq_submit_frag_skb(struct fec_enet_priv_tx_q *txq, bdp = fec_enet_get_nextdesc(bdp, fep, queue); ebdp = (struct bufdesc_ex *)bdp; - status = bdp->cbd_sc; + status = fec16_to_cpu(bdp->cbd_sc); status &= ~BD_ENET_TX_STATS; status |= (BD_ENET_TX_TC | BD_ENET_TX_READY); frag_len = skb_shinfo(skb)->frags[frag].size; @@ -411,7 +413,7 @@ fec_enet_txq_submit_frag_skb(struct fec_enet_priv_tx_q *txq, if (skb->ip_summed == CHECKSUM_PARTIAL) estatus |= BD_ENET_TX_PINS | BD_ENET_TX_IINS; ebdp->cbd_bdu = 0; - ebdp->cbd_esc = estatus; + ebdp->cbd_esc = cpu_to_fec32(estatus); } bufaddr = page_address(this_frag->page.p) + this_frag->page_offset; @@ -435,9 +437,9 @@ fec_enet_txq_submit_frag_skb(struct fec_enet_priv_tx_q *txq, goto dma_mapping_error; } - bdp->cbd_bufaddr = addr; - bdp->cbd_datlen = frag_len; - bdp->cbd_sc = status; + bdp->cbd_bufaddr = cpu_to_fec32(addr); + bdp->cbd_datlen = cpu_to_fec16(frag_len); + bdp->cbd_sc = cpu_to_fec16(status); } return bdp; @@ -445,8 +447,8 @@ dma_mapping_error: bdp = txq->cur_tx; for (i = 0; i < frag; i++) { bdp = fec_enet_get_nextdesc(bdp, fep, queue); - dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, - bdp->cbd_datlen, DMA_TO_DEVICE); + dma_unmap_single(&fep->pdev->dev, fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), DMA_TO_DEVICE); } return ERR_PTR(-ENOMEM); } @@ -483,7 +485,7 @@ static int fec_enet_txq_submit_skb(struct fec_enet_priv_tx_q *txq, /* Fill in a Tx ring entry */ bdp = txq->cur_tx; last_bdp = bdp; - status = bdp->cbd_sc; + status = fec16_to_cpu(bdp->cbd_sc); status &= ~BD_ENET_TX_STATS; /* Set buffer length and buffer pointer */ @@ -539,21 +541,21 @@ static int fec_enet_txq_submit_skb(struct fec_enet_priv_tx_q *txq, estatus |= BD_ENET_TX_PINS | BD_ENET_TX_IINS; ebdp->cbd_bdu = 0; - ebdp->cbd_esc = estatus; + ebdp->cbd_esc = cpu_to_fec32(estatus); } index = fec_enet_get_bd_index(txq->tx_bd_base, last_bdp, fep); /* Save skb pointer */ txq->tx_skbuff[index] = skb; - bdp->cbd_datlen = buflen; - bdp->cbd_bufaddr = addr; + bdp->cbd_datlen = cpu_to_fec16(buflen); + bdp->cbd_bufaddr = cpu_to_fec32(addr); /* Send it on its way. Tell FEC it's ready, interrupt when done, * it's the last BD of the frame, and to put the CRC on the end. */ status |= (BD_ENET_TX_READY | BD_ENET_TX_TC); - bdp->cbd_sc = status; + bdp->cbd_sc = cpu_to_fec16(status); /* If this was the last BD in the ring, start at the beginning again. */ bdp = fec_enet_get_nextdesc(last_bdp, fep, queue); @@ -585,7 +587,7 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb, unsigned int estatus = 0; dma_addr_t addr; - status = bdp->cbd_sc; + status = fec16_to_cpu(bdp->cbd_sc); status &= ~BD_ENET_TX_STATS; status |= (BD_ENET_TX_TC | BD_ENET_TX_READY); @@ -607,8 +609,8 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb, return NETDEV_TX_BUSY; } - bdp->cbd_datlen = size; - bdp->cbd_bufaddr = addr; + bdp->cbd_datlen = cpu_to_fec16(size); + bdp->cbd_bufaddr = cpu_to_fec32(addr); if (fep->bufdesc_ex) { if (fep->quirks & FEC_QUIRK_HAS_AVB) @@ -616,7 +618,7 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb, if (skb->ip_summed == CHECKSUM_PARTIAL) estatus |= BD_ENET_TX_PINS | BD_ENET_TX_IINS; ebdp->cbd_bdu = 0; - ebdp->cbd_esc = estatus; + ebdp->cbd_esc = cpu_to_fec32(estatus); } /* Handle the last BD specially */ @@ -625,10 +627,10 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb, if (is_last) { status |= BD_ENET_TX_INTR; if (fep->bufdesc_ex) - ebdp->cbd_esc |= BD_ENET_TX_INT; + ebdp->cbd_esc |= cpu_to_fec32(BD_ENET_TX_INT); } - bdp->cbd_sc = status; + bdp->cbd_sc = cpu_to_fec16(status); return 0; } @@ -647,7 +649,7 @@ fec_enet_txq_put_hdr_tso(struct fec_enet_priv_tx_q *txq, unsigned short status; unsigned int estatus = 0; - status = bdp->cbd_sc; + status = fec16_to_cpu(bdp->cbd_sc); status &= ~BD_ENET_TX_STATS; status |= (BD_ENET_TX_TC | BD_ENET_TX_READY); @@ -671,8 +673,8 @@ fec_enet_txq_put_hdr_tso(struct fec_enet_priv_tx_q *txq, } } - bdp->cbd_bufaddr = dmabuf; - bdp->cbd_datlen = hdr_len; + bdp->cbd_bufaddr = cpu_to_fec32(dmabuf); + bdp->cbd_datlen = cpu_to_fec16(hdr_len); if (fep->bufdesc_ex) { if (fep->quirks & FEC_QUIRK_HAS_AVB) @@ -680,10 +682,10 @@ fec_enet_txq_put_hdr_tso(struct fec_enet_priv_tx_q *txq, if (skb->ip_summed == CHECKSUM_PARTIAL) estatus |= BD_ENET_TX_PINS | BD_ENET_TX_IINS; ebdp->cbd_bdu = 0; - ebdp->cbd_esc = estatus; + ebdp->cbd_esc = cpu_to_fec32(estatus); } - bdp->cbd_sc = status; + bdp->cbd_sc = cpu_to_fec16(status); return 0; } @@ -823,15 +825,15 @@ static void fec_enet_bd_init(struct net_device *dev) /* Initialize the BD for every fragment in the page. */ if (bdp->cbd_bufaddr) - bdp->cbd_sc = BD_ENET_RX_EMPTY; + bdp->cbd_sc = cpu_to_fec16(BD_ENET_RX_EMPTY); else - bdp->cbd_sc = 0; + bdp->cbd_sc = cpu_to_fec16(0); bdp = fec_enet_get_nextdesc(bdp, fep, q); } /* Set the last buffer to wrap */ bdp = fec_enet_get_prevdesc(bdp, fep, q); - bdp->cbd_sc |= BD_SC_WRAP; + bdp->cbd_sc |= cpu_to_fec16(BD_SC_WRAP); rxq->cur_rx = rxq->rx_bd_base; } @@ -844,18 +846,18 @@ static void fec_enet_bd_init(struct net_device *dev) for (i = 0; i < txq->tx_ring_size; i++) { /* Initialize the BD for every fragment in the page. */ - bdp->cbd_sc = 0; + bdp->cbd_sc = cpu_to_fec16(0); if (txq->tx_skbuff[i]) { dev_kfree_skb_any(txq->tx_skbuff[i]); txq->tx_skbuff[i] = NULL; } - bdp->cbd_bufaddr = 0; + bdp->cbd_bufaddr = cpu_to_fec32(0); bdp = fec_enet_get_nextdesc(bdp, fep, q); } /* Set the last buffer to wrap */ bdp = fec_enet_get_prevdesc(bdp, fep, q); - bdp->cbd_sc |= BD_SC_WRAP; + bdp->cbd_sc |= cpu_to_fec16(BD_SC_WRAP); txq->dirty_tx = bdp; } } @@ -947,8 +949,10 @@ fec_restart(struct net_device *ndev) */ if (fep->quirks & FEC_QUIRK_ENET_MAC) { memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN); - writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW); - writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH); + writel((__force u32)cpu_to_be32(temp_mac[0]), + fep->hwp + FEC_ADDR_LOW); + writel((__force u32)cpu_to_be32(temp_mac[1]), + fep->hwp + FEC_ADDR_HIGH); } /* Clear any outstanding interrupt. */ @@ -1222,7 +1226,7 @@ fec_enet_tx_queue(struct net_device *ndev, u16 queue_id) while (bdp != READ_ONCE(txq->cur_tx)) { /* Order the load of cur_tx and cbd_sc */ rmb(); - status = READ_ONCE(bdp->cbd_sc); + status = fec16_to_cpu(READ_ONCE(bdp->cbd_sc)); if (status & BD_ENET_TX_READY) break; @@ -1230,10 +1234,12 @@ fec_enet_tx_queue(struct net_device *ndev, u16 queue_id) skb = txq->tx_skbuff[index]; txq->tx_skbuff[index] = NULL; - if (!IS_TSO_HEADER(txq, bdp->cbd_bufaddr)) - dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, - bdp->cbd_datlen, DMA_TO_DEVICE); - bdp->cbd_bufaddr = 0; + if (!IS_TSO_HEADER(txq, fec32_to_cpu(bdp->cbd_bufaddr))) + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), + fec16_to_cpu(bdp->cbd_datlen), + DMA_TO_DEVICE); + bdp->cbd_bufaddr = cpu_to_fec32(0); if (!skb) { bdp = fec_enet_get_nextdesc(bdp, fep, queue_id); continue; @@ -1264,7 +1270,7 @@ fec_enet_tx_queue(struct net_device *ndev, u16 queue_id) struct skb_shared_hwtstamps shhwtstamps; struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; - fec_enet_hwtstamp(fep, ebdp->ts, &shhwtstamps); + fec_enet_hwtstamp(fep, fec32_to_cpu(ebdp->ts), &shhwtstamps); skb_tstamp_tx(skb, &shhwtstamps); } @@ -1324,10 +1330,8 @@ fec_enet_new_rxbdp(struct net_device *ndev, struct bufdesc *bdp, struct sk_buff if (off) skb_reserve(skb, fep->rx_align + 1 - off); - bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data, - FEC_ENET_RX_FRSIZE - fep->rx_align, - DMA_FROM_DEVICE); - if (dma_mapping_error(&fep->pdev->dev, bdp->cbd_bufaddr)) { + bdp->cbd_bufaddr = cpu_to_fec32(dma_map_single(&fep->pdev->dev, skb->data, FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE)); + if (dma_mapping_error(&fep->pdev->dev, fec32_to_cpu(bdp->cbd_bufaddr))) { if (net_ratelimit()) netdev_err(ndev, "Rx DMA memory map failed\n"); return -ENOMEM; @@ -1349,7 +1353,8 @@ static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb, if (!new_skb) return false; - dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr, + dma_sync_single_for_cpu(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE); if (!swap) @@ -1396,7 +1401,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) */ bdp = rxq->cur_rx; - while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { + while (!((status = fec16_to_cpu(bdp->cbd_sc)) & BD_ENET_RX_EMPTY)) { if (pkt_received >= budget) break; @@ -1438,7 +1443,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) /* Process the incoming frame. */ ndev->stats.rx_packets++; - pkt_len = bdp->cbd_datlen; + pkt_len = fec16_to_cpu(bdp->cbd_datlen); ndev->stats.rx_bytes += pkt_len; index = fec_enet_get_bd_index(rxq->rx_bd_base, bdp, fep); @@ -1456,7 +1461,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) ndev->stats.rx_dropped++; goto rx_processing_done; } - dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, + dma_unmap_single(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE); } @@ -1475,7 +1481,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) /* If this is a VLAN packet remove the VLAN Tag */ vlan_packet_rcvd = false; if ((ndev->features & NETIF_F_HW_VLAN_CTAG_RX) && - fep->bufdesc_ex && (ebdp->cbd_esc & BD_ENET_RX_VLAN)) { + fep->bufdesc_ex && + (ebdp->cbd_esc & cpu_to_fec32(BD_ENET_RX_VLAN))) { /* Push and remove the vlan tag */ struct vlan_hdr *vlan_header = (struct vlan_hdr *) (data + ETH_HLEN); @@ -1491,12 +1498,12 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) /* Get receive timestamp from the skb */ if (fep->hwts_rx_en && fep->bufdesc_ex) - fec_enet_hwtstamp(fep, ebdp->ts, + fec_enet_hwtstamp(fep, fec32_to_cpu(ebdp->ts), skb_hwtstamps(skb)); if (fep->bufdesc_ex && (fep->csum_flags & FLAG_RX_CSUM_ENABLED)) { - if (!(ebdp->cbd_esc & FLAG_RX_CSUM_ERROR)) { + if (!(ebdp->cbd_esc & cpu_to_fec32(FLAG_RX_CSUM_ERROR))) { /* don't check it */ skb->ip_summed = CHECKSUM_UNNECESSARY; } else { @@ -1513,7 +1520,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id) napi_gro_receive(&fep->napi, skb); if (is_copybreak) { - dma_sync_single_for_device(&fep->pdev->dev, bdp->cbd_bufaddr, + dma_sync_single_for_device(&fep->pdev->dev, + fec32_to_cpu(bdp->cbd_bufaddr), FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE); } else { @@ -1527,12 +1535,12 @@ rx_processing_done: /* Mark the buffer empty */ status |= BD_ENET_RX_EMPTY; - bdp->cbd_sc = status; + bdp->cbd_sc = cpu_to_fec16(status); if (fep->bufdesc_ex) { struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; - ebdp->cbd_esc = BD_ENET_RX_INT; + ebdp->cbd_esc = cpu_to_fec32(BD_ENET_RX_INT); ebdp->cbd_prot = 0; ebdp->cbd_bdu = 0; } @@ -2662,7 +2670,7 @@ static void fec_enet_free_buffers(struct net_device *ndev) rxq->rx_skbuff[i] = NULL; if (skb) { dma_unmap_single(&fep->pdev->dev, - bdp->cbd_bufaddr, + fec32_to_cpu(bdp->cbd_bufaddr), FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE); dev_kfree_skb(skb); @@ -2777,11 +2785,11 @@ fec_enet_alloc_rxq_buffers(struct net_device *ndev, unsigned int queue) } rxq->rx_skbuff[i] = skb; - bdp->cbd_sc = BD_ENET_RX_EMPTY; + bdp->cbd_sc = cpu_to_fec16(BD_ENET_RX_EMPTY); if (fep->bufdesc_ex) { struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; - ebdp->cbd_esc = BD_ENET_RX_INT; + ebdp->cbd_esc = cpu_to_fec32(BD_ENET_RX_INT); } bdp = fec_enet_get_nextdesc(bdp, fep, queue); @@ -2789,7 +2797,7 @@ fec_enet_alloc_rxq_buffers(struct net_device *ndev, unsigned int queue) /* Set the last buffer to wrap. */ bdp = fec_enet_get_prevdesc(bdp, fep, queue); - bdp->cbd_sc |= BD_SC_WRAP; + bdp->cbd_sc |= cpu_to_fec16(BD_SC_WRAP); return 0; err_alloc: @@ -2812,12 +2820,12 @@ fec_enet_alloc_txq_buffers(struct net_device *ndev, unsigned int queue) if (!txq->tx_bounce[i]) goto err_alloc; - bdp->cbd_sc = 0; - bdp->cbd_bufaddr = 0; + bdp->cbd_sc = cpu_to_fec16(0); + bdp->cbd_bufaddr = cpu_to_fec32(0); if (fep->bufdesc_ex) { struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; - ebdp->cbd_esc = BD_ENET_TX_INT; + ebdp->cbd_esc = cpu_to_fec32(BD_ENET_TX_INT); } bdp = fec_enet_get_nextdesc(bdp, fep, queue); @@ -2825,7 +2833,7 @@ fec_enet_alloc_txq_buffers(struct net_device *ndev, unsigned int queue) /* Set the last buffer to wrap. */ bdp = fec_enet_get_prevdesc(bdp, fep, queue); - bdp->cbd_sc |= BD_SC_WRAP; + bdp->cbd_sc |= cpu_to_fec16(BD_SC_WRAP); return 0; -- cgit v1.2.3 From 36df745536ab81956cf68329c8049ad07f4a0cf0 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 25 Jan 2016 11:43:09 +0530 Subject: net: macb: fix build warning We are getting build warning about: macb.c:2889:13: warning: 'tx_clk' may be used uninitialized in this function macb.c:2888:11: warning: 'hclk' may be used uninitialized in this function In reality they are not used uninitialized as clk_init() will initialize them, this patch will just silence the warning. Signed-off-by: Sudip Mukherjee Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 9d9984a87d42..50c94104f19c 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2823,7 +2823,7 @@ static int macb_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct device_node *phy_node; const struct macb_config *macb_config = NULL; - struct clk *pclk, *hclk, *tx_clk; + struct clk *pclk, *hclk = NULL, *tx_clk = NULL; unsigned int queue_mask, num_queues; struct macb_platform_data *pdata; bool native_io; -- cgit v1.2.3 From 62f2aaabcf41b9e69d0356a7c1716b173241c105 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Mon, 25 Jan 2016 13:05:20 +0530 Subject: defxx: fix build warning We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by: Sudip Mukherjee Acked-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/fddi/defxx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index 7f975a2c8990..b0de8ecd7fe8 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -533,8 +533,8 @@ static int dfx_register(struct device *bdev) const char *print_name = dev_name(bdev); struct net_device *dev; DFX_board_t *bp; /* board pointer */ - resource_size_t bar_start[3]; /* pointers to ports */ - resource_size_t bar_len[3]; /* resource length */ + resource_size_t bar_start[3] = {0}; /* pointers to ports */ + resource_size_t bar_len[3] = {0}; /* resource length */ int alloc_size; /* total buffer size used */ struct resource *region; int err = 0; @@ -3697,8 +3697,8 @@ static void dfx_unregister(struct device *bdev) int dfx_bus_pci = dev_is_pci(bdev); int dfx_bus_tc = DFX_BUS_TC(bdev); int dfx_use_mmio = DFX_MMIO || dfx_bus_tc; - resource_size_t bar_start[3]; /* pointers to ports */ - resource_size_t bar_len[3]; /* resource lengths */ + resource_size_t bar_start[3] = {0}; /* pointers to ports */ + resource_size_t bar_len[3] = {0}; /* resource lengths */ int alloc_size; /* total buffer size used */ unregister_netdev(dev); -- cgit v1.2.3 From 05f3b50ea81d7af5479b55147ef98f8bbcd4a8b9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 Jan 2016 11:40:50 +0100 Subject: net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28 As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28 is wrong if some other ARM platform uses this device - the operation of the driver would depend on an unrelated ARM platform that might or might not be set for multi-platform kernels. Prior to my previous patch, any other platforms using it would have been broken already due to having the cbd_datlen/cbd_sc fields in the wrong order, but byte ordering correctly, so no such platforms can exist and work today. In any case, it seems likely that only Freescale SoCs use this part, and those are little-endian on ARM, so CONFIG_ARM is safe for them. Signed-off-by: Johannes Berg Reviewed-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.h | 8 +++----- drivers/net/ethernet/freescale/fec_main.c | 3 +-- 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 7dd47a0b8cfb..2106d72c91dc 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -19,8 +19,7 @@ #include #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ - defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) /* * Just figures, Motorola would have to change the offsets for * registers in the same peripheral device on different models @@ -192,10 +191,9 @@ * Define the buffer descriptor structure. * * Evidently, ARM SoCs have the FEC block generated in a - * little endian mode; or at least ARCH_MXC/SOC_IMX28 do, - * so adjust endianness accordingly. + * little endian mode so adjust endianness accordingly. */ -#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) +#if defined(CONFIG_ARM) #define fec32_to_cpu le32_to_cpu #define fec16_to_cpu le16_to_cpu #define cpu_to_fec32 cpu_to_le32 diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 3f3b9eacc286..41c81f6ec630 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2153,8 +2153,7 @@ static int fec_enet_get_regs_len(struct net_device *ndev) /* List of registers that can be safety be read to dump them with ethtool */ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) || defined(CONFIG_M532x) || \ - defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) static u32 fec_enet_register_offset[] = { FEC_IEVENT, FEC_IMASK, FEC_R_DES_ACTIVE_0, FEC_X_DES_ACTIVE_0, FEC_ECNTRL, FEC_MII_DATA, FEC_MII_SPEED, FEC_MIB_CTRLSTAT, FEC_R_CNTRL, -- cgit v1.2.3 From 757647e10e55c01fb7a9c4356529442e316a7c72 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Mon, 25 Jan 2016 16:00:41 +0100 Subject: hv_netvsc: use skb_get_hash() instead of a homegrown implementation Recent changes to 'struct flow_keys' (e.g commit d34af823ff40 ("net: Add VLAN ID to flow_keys")) introduced a performance regression in netvsc driver. Is problem is, however, not the above mentioned commit but the fact that netvsc_set_hash() function did some assumptions on the struct flow_keys data layout and this is wrong. Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change will also imply switching to Jenkins hash from the currently used Toeplitz but it seems there is no good excuse for Toeplitz to stay. Signed-off-by: Vitaly Kuznetsov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 67 ++--------------------------------------- 1 file changed, 3 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 1c8db9afdcda..1d3a66563bac 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -196,65 +196,6 @@ static void *init_ppi_data(struct rndis_message *msg, u32 ppi_size, return ppi; } -union sub_key { - u64 k; - struct { - u8 pad[3]; - u8 kb; - u32 ka; - }; -}; - -/* Toeplitz hash function - * data: network byte order - * return: host byte order - */ -static u32 comp_hash(u8 *key, int klen, void *data, int dlen) -{ - union sub_key subk; - int k_next = 4; - u8 dt; - int i, j; - u32 ret = 0; - - subk.k = 0; - subk.ka = ntohl(*(u32 *)key); - - for (i = 0; i < dlen; i++) { - subk.kb = key[k_next]; - k_next = (k_next + 1) % klen; - dt = ((u8 *)data)[i]; - for (j = 0; j < 8; j++) { - if (dt & 0x80) - ret ^= subk.ka; - dt <<= 1; - subk.k <<= 1; - } - } - - return ret; -} - -static bool netvsc_set_hash(u32 *hash, struct sk_buff *skb) -{ - struct flow_keys flow; - int data_len; - - if (!skb_flow_dissect_flow_keys(skb, &flow, 0) || - !(flow.basic.n_proto == htons(ETH_P_IP) || - flow.basic.n_proto == htons(ETH_P_IPV6))) - return false; - - if (flow.basic.ip_proto == IPPROTO_TCP) - data_len = 12; - else - data_len = 8; - - *hash = comp_hash(netvsc_hash_key, HASH_KEYLEN, &flow, data_len); - - return true; -} - static u16 netvsc_select_queue(struct net_device *ndev, struct sk_buff *skb, void *accel_priv, select_queue_fallback_t fallback) { @@ -267,11 +208,9 @@ static u16 netvsc_select_queue(struct net_device *ndev, struct sk_buff *skb, if (nvsc_dev == NULL || ndev->real_num_tx_queues <= 1) return 0; - if (netvsc_set_hash(&hash, skb)) { - q_idx = nvsc_dev->send_table[hash % VRSS_SEND_TAB_SIZE] % - ndev->real_num_tx_queues; - skb_set_hash(skb, hash, PKT_HASH_TYPE_L3); - } + hash = skb_get_hash(skb); + q_idx = nvsc_dev->send_table[hash % VRSS_SEND_TAB_SIZE] % + ndev->real_num_tx_queues; if (!nvsc_dev->chn_table[q_idx]) q_idx = 0; -- cgit v1.2.3 From c85e4924452ae8225c8829f3fa8a2f7baa34bc5c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Mon, 25 Jan 2016 09:49:31 -0800 Subject: hv_netvsc: Fix book keeping of skb during batching process Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao for bisecting and analysis. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 1 + drivers/net/hyperv/netvsc.c | 33 ++++++++++++++++++++++----------- 2 files changed, 23 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index f4130af09244..fcb92c0d0eb9 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -624,6 +624,7 @@ struct nvsp_message { #define RNDIS_PKT_ALIGN_DEFAULT 8 struct multi_send_data { + struct sk_buff *skb; /* skb containing the pkt */ struct hv_netvsc_packet *pkt; /* netvsc pkt pending */ u32 count; /* counter of batched packets */ }; diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 059fc5231601..ec313fc08d82 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -841,6 +841,18 @@ static inline int netvsc_send_pkt( return ret; } +/* Move packet out of multi send data (msd), and clear msd */ +static inline void move_pkt_msd(struct hv_netvsc_packet **msd_send, + struct sk_buff **msd_skb, + struct multi_send_data *msdp) +{ + *msd_skb = msdp->skb; + *msd_send = msdp->pkt; + msdp->skb = NULL; + msdp->pkt = NULL; + msdp->count = 0; +} + int netvsc_send(struct hv_device *device, struct hv_netvsc_packet *packet, struct rndis_message *rndis_msg, @@ -855,6 +867,7 @@ int netvsc_send(struct hv_device *device, unsigned int section_index = NETVSC_INVALID_INDEX; struct multi_send_data *msdp; struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL; + struct sk_buff *msd_skb = NULL; bool try_batch; bool xmit_more = (skb != NULL) ? skb->xmit_more : false; @@ -897,10 +910,8 @@ int netvsc_send(struct hv_device *device, net_device->send_section_size) { section_index = netvsc_get_next_send_section(net_device); if (section_index != NETVSC_INVALID_INDEX) { - msd_send = msdp->pkt; - msdp->pkt = NULL; - msdp->count = 0; - msd_len = 0; + move_pkt_msd(&msd_send, &msd_skb, msdp); + msd_len = 0; } } @@ -919,31 +930,31 @@ int netvsc_send(struct hv_device *device, packet->total_data_buflen += msd_len; } - if (msdp->pkt) - dev_kfree_skb_any(skb); + if (msdp->skb) + dev_kfree_skb_any(msdp->skb); if (xmit_more && !packet->cp_partial) { + msdp->skb = skb; msdp->pkt = packet; msdp->count++; } else { cur_send = packet; + msdp->skb = NULL; msdp->pkt = NULL; msdp->count = 0; } } else { - msd_send = msdp->pkt; - msdp->pkt = NULL; - msdp->count = 0; + move_pkt_msd(&msd_send, &msd_skb, msdp); cur_send = packet; } if (msd_send) { - m_ret = netvsc_send_pkt(msd_send, net_device, pb, skb); + m_ret = netvsc_send_pkt(msd_send, net_device, NULL, msd_skb); if (m_ret != 0) { netvsc_free_send_slot(net_device, msd_send->send_buf_index); - dev_kfree_skb_any(skb); + dev_kfree_skb_any(msd_skb); } } -- cgit v1.2.3 From 5cae7615b613381a04d3dd06b8237234cc3f7cc9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 20 Jan 2016 19:53:02 -0800 Subject: i40e: fix build warnings Fixes following build warnings : drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning: 'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning: 'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning: 'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning: 'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning: 'i40e_del_geneve_port' defined but not used [-Wunused-function] Fixes: 6a899024058d ("i40e: geneve tunnel offload support") Signed-off-by: Eric Dumazet Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index bb4612c159fd..8f3b53e0dc46 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7117,9 +7117,7 @@ static void i40e_service_task(struct work_struct *work) i40e_watchdog_subtask(pf); i40e_fdir_reinit_subtask(pf); i40e_sync_filters_subtask(pf); -#if IS_ENABLED(CONFIG_VXLAN) || IS_ENABLED(CONFIG_GENEVE) i40e_sync_udp_filters_subtask(pf); -#endif i40e_clean_adminq_subtask(pf); i40e_service_event_complete(pf); @@ -8515,6 +8513,8 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port) } #endif + +#if IS_ENABLED(CONFIG_VXLAN) /** * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up * @netdev: This physical port's netdev @@ -8524,7 +8524,6 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port) static void i40e_add_vxlan_port(struct net_device *netdev, sa_family_t sa_family, __be16 port) { -#if IS_ENABLED(CONFIG_VXLAN) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; struct i40e_pf *pf = vsi->back; @@ -8557,7 +8556,6 @@ static void i40e_add_vxlan_port(struct net_device *netdev, pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_VXLAN; pf->pending_udp_bitmap |= BIT_ULL(next_idx); pf->flags |= I40E_FLAG_UDP_FILTER_SYNC; -#endif } /** @@ -8569,7 +8567,6 @@ static void i40e_add_vxlan_port(struct net_device *netdev, static void i40e_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family, __be16 port) { -#if IS_ENABLED(CONFIG_VXLAN) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; struct i40e_pf *pf = vsi->back; @@ -8592,9 +8589,10 @@ static void i40e_del_vxlan_port(struct net_device *netdev, netdev_warn(netdev, "vxlan port %d was not found, not deleting\n", ntohs(port)); } -#endif } +#endif +#if IS_ENABLED(CONFIG_GENEVE) /** * i40e_add_geneve_port - Get notifications about GENEVE ports that come up * @netdev: This physical port's netdev @@ -8604,7 +8602,6 @@ static void i40e_del_vxlan_port(struct net_device *netdev, static void i40e_add_geneve_port(struct net_device *netdev, sa_family_t sa_family, __be16 port) { -#if IS_ENABLED(CONFIG_GENEVE) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; struct i40e_pf *pf = vsi->back; @@ -8639,7 +8636,6 @@ static void i40e_add_geneve_port(struct net_device *netdev, pf->flags |= I40E_FLAG_UDP_FILTER_SYNC; dev_info(&pf->pdev->dev, "adding geneve port %d\n", ntohs(port)); -#endif } /** @@ -8651,7 +8647,6 @@ static void i40e_add_geneve_port(struct net_device *netdev, static void i40e_del_geneve_port(struct net_device *netdev, sa_family_t sa_family, __be16 port) { -#if IS_ENABLED(CONFIG_GENEVE) struct i40e_netdev_priv *np = netdev_priv(netdev); struct i40e_vsi *vsi = np->vsi; struct i40e_pf *pf = vsi->back; @@ -8677,8 +8672,8 @@ static void i40e_del_geneve_port(struct net_device *netdev, netdev_warn(netdev, "geneve port %d was not found, not deleting\n", ntohs(port)); } -#endif } +#endif static int i40e_get_phys_port_id(struct net_device *netdev, struct netdev_phys_item_id *ppid) -- cgit v1.2.3 From 79febbc19b81b5242339bffb90e4dbea15015dde Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 20 Jan 2016 19:53:17 -0800 Subject: net: i40e: shut up uninitialized variable warnings intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring': intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here Signed-off-by: Arnd Bergmann Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 720516b0e8ee..47bd8b3145a7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2313,8 +2313,8 @@ static void i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, struct iphdr *this_ip_hdr; u32 network_hdr_len; u8 l4_hdr = 0; - struct udphdr *oudph; - struct iphdr *oiph; + struct udphdr *oudph = NULL; + struct iphdr *oiph = NULL; u32 l4_tunnel = 0; if (skb->encapsulation) { -- cgit v1.2.3 From ca296c571f6929e42dc0ac0bb5c81cdb5323362d Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Thu, 14 Jan 2016 10:24:10 +0200 Subject: iwlwifi: update support for 3168 series firmware and NVM Update the struct which defines the support for 3168 cards. Now it will search for a firmware of this format: iwlwifi-3168-XX.ucode Also, set the minimum version of the ucode to 20. Update the minimum NVM version and minimum NVM calibrations version of the 3168 series. Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/intel/iwlwifi/iwl-7000.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c index e60cf141ed79..fa41a5e1c890 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c @@ -74,16 +74,19 @@ #define IWL7260_UCODE_API_MAX 17 #define IWL7265_UCODE_API_MAX 17 #define IWL7265D_UCODE_API_MAX 20 +#define IWL3168_UCODE_API_MAX 20 /* Oldest version we won't warn about */ #define IWL7260_UCODE_API_OK 13 #define IWL7265_UCODE_API_OK 13 #define IWL7265D_UCODE_API_OK 13 +#define IWL3168_UCODE_API_OK 20 /* Lowest firmware API version supported */ #define IWL7260_UCODE_API_MIN 13 #define IWL7265_UCODE_API_MIN 13 #define IWL7265D_UCODE_API_MIN 13 +#define IWL3168_UCODE_API_MIN 20 /* NVM versions */ #define IWL7260_NVM_VERSION 0x0a1d @@ -92,6 +95,8 @@ #define IWL3160_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL3165_NVM_VERSION 0x709 #define IWL3165_TX_POWER_VERSION 0xffff /* meaningless */ +#define IWL3168_NVM_VERSION 0xd01 +#define IWL3168_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL7265_NVM_VERSION 0x0a1d #define IWL7265_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL7265D_NVM_VERSION 0x0c11 @@ -109,6 +114,9 @@ #define IWL3160_FW_PRE "iwlwifi-3160-" #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE __stringify(api) ".ucode" +#define IWL3168_FW_PRE "iwlwifi-3168-" +#define IWL3168_MODULE_FIRMWARE(api) IWL3168_FW_PRE __stringify(api) ".ucode" + #define IWL7265_FW_PRE "iwlwifi-7265-" #define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode" @@ -180,6 +188,12 @@ static const struct iwl_ht_params iwl7000_ht_params = { .ucode_api_ok = IWL7265_UCODE_API_OK, \ .ucode_api_min = IWL7265_UCODE_API_MIN +#define IWL_DEVICE_3008 \ + IWL_DEVICE_7000_COMMON, \ + .ucode_api_max = IWL3168_UCODE_API_MAX, \ + .ucode_api_ok = IWL3168_UCODE_API_OK, \ + .ucode_api_min = IWL3168_UCODE_API_MIN + #define IWL_DEVICE_7005D \ IWL_DEVICE_7000_COMMON, \ .ucode_api_max = IWL7265D_UCODE_API_MAX, \ @@ -299,11 +313,11 @@ const struct iwl_cfg iwl3165_2ac_cfg = { const struct iwl_cfg iwl3168_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 3168", - .fw_name_pre = IWL7265D_FW_PRE, - IWL_DEVICE_7000, + .fw_name_pre = IWL3168_FW_PRE, + IWL_DEVICE_3008, .ht_params = &iwl7000_ht_params, - .nvm_ver = IWL3165_NVM_VERSION, - .nvm_calib_ver = IWL3165_TX_POWER_VERSION, + .nvm_ver = IWL3168_NVM_VERSION, + .nvm_calib_ver = IWL3168_TX_POWER_VERSION, .pwr_tx_backoffs = iwl7265_pwr_tx_backoffs, .dccm_len = IWL7265_DCCM_LEN, }; @@ -376,5 +390,6 @@ const struct iwl_cfg iwl7265d_n_cfg = { MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL7260_UCODE_API_OK)); +MODULE_FIRMWARE(IWL3168_MODULE_FIRMWARE(IWL3168_UCODE_API_OK)); MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7265_UCODE_API_OK)); MODULE_FIRMWARE(IWL7265D_MODULE_FIRMWARE(IWL7265D_UCODE_API_OK)); -- cgit v1.2.3 From 69c7fda40921c125eeeef6a827f6270ac6aa1baa Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Tue, 29 Dec 2015 11:26:35 +0200 Subject: iwlwifi: mvm: rs: fix TPC statistics handling FW behaviour changed and now updates driver about the used TPC reduction in the following cases: 1. In tx response, which is used mostly for a single frame case 2. In BA notification When tx aggregation fails with the initial rate, FW will send to the driver BA notification and will try to transmit with the next rate, but this time without tx power reduction. Thus, in case of a failure with the initial rate, driver will get two BA notifications, the first one with reduced tx power as in the LQ command and the second one with 0 power reduction. This patch adapts the TPC statistics according to the description above: 1. Use BA notifications instead of Tx response 2. For TPC only, drop the optimization which considers empty BA as one MPDU. The reason is that with TPC we want to recover very quickly from a bad power reduction and, therefore we'd like the success ratio to get an immediate hit when failing to get a BA, so we'd switch back to a lower or zero power reduction Signed-off-by: Gregory Greenman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 74 ++++++++++++++-------- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 5 +- 3 files changed, 56 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h index 0036d18334af..ba3f0bbddde8 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h @@ -510,6 +510,9 @@ struct iwl_mvm_tx_resp { * @scd_ssn: the index of the last contiguously sent packet * @txed: number of Txed frames in this batch * @txed_2_done: number of Acked frames in this batch + * @reduced_txp: power reduced according to TPC. This is the actual value and + * not a copy from the LQ command. Thus, if not the first rate was used + * for Tx-ing then this value will be set to 0 by FW. */ struct iwl_mvm_ba_notif { __le32 sta_addr_lo32; @@ -524,7 +527,8 @@ struct iwl_mvm_ba_notif { __le16 scd_ssn; u8 txed; u8 txed_2_done; - __le16 reserved1; + u8 reduced_txp; + u8 reserved1; } __packed; /* diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 7bb6fd0e4391..94caa88df442 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -2,6 +2,7 @@ * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -724,14 +725,28 @@ static int _rs_collect_tx_data(struct iwl_mvm *mvm, return 0; } -static int rs_collect_tx_data(struct iwl_mvm *mvm, - struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, - int scale_index, int attempts, int successes, - u8 reduced_txp) +static int rs_collect_tpc_data(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + int scale_index, int attempts, int successes, + u8 reduced_txp) +{ + struct iwl_rate_scale_data *window = NULL; + + if (WARN_ON_ONCE(reduced_txp > TPC_MAX_REDUCTION)) + return -EINVAL; + + window = &tbl->tpc_win[reduced_txp]; + return _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, + window); +} + +static int rs_collect_tlc_data(struct iwl_mvm *mvm, + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + int scale_index, int attempts, int successes) { struct iwl_rate_scale_data *window = NULL; - int ret; if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) return -EINVAL; @@ -745,16 +760,6 @@ static int rs_collect_tx_data(struct iwl_mvm *mvm, /* Select window for current tx bit rate */ window = &(tbl->win[scale_index]); - - ret = _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, - window); - if (ret) - return ret; - - if (WARN_ON_ONCE(reduced_txp > TPC_MAX_REDUCTION)) - return -EINVAL; - - window = &tbl->tpc_win[reduced_txp]; return _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, window); } @@ -1301,17 +1306,30 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, * first index into rate scale table. */ if (info->flags & IEEE80211_TX_STAT_AMPDU) { - /* ampdu_ack_len = 0 marks no BA was received. In this case - * treat it as a single frame loss as we don't want the success - * ratio to dip too quickly because a BA wasn't received + rs_collect_tpc_data(mvm, lq_sta, curr_tbl, lq_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len, + reduced_txp); + + /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat + * it as a single frame loss as we don't want the success ratio + * to dip too quickly because a BA wasn't received. + * For TPC, there's no need for this optimisation since we want + * to recover very quickly from a bad power reduction and, + * therefore we'd like the success ratio to get an immediate hit + * when failing to get a BA, so we'd switch back to a lower or + * zero power reduction. When FW transmits agg with a rate + * different from the initial rate, it will not use reduced txp + * and will send BA notification twice (one empty with reduced + * txp equal to the value from LQ and one with reduced txp 0). + * We need to update counters for each txp level accordingly. */ if (info->status.ampdu_ack_len == 0) info->status.ampdu_len = 1; - rs_collect_tx_data(mvm, lq_sta, curr_tbl, lq_rate.index, - info->status.ampdu_len, - info->status.ampdu_ack_len, - reduced_txp); + rs_collect_tlc_data(mvm, lq_sta, curr_tbl, lq_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len); /* Update success/fail counts if not searching for new mode */ if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { @@ -1344,9 +1362,13 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, else continue; - rs_collect_tx_data(mvm, lq_sta, tmp_tbl, lq_rate.index, - 1, i < retries ? 0 : legacy_success, - reduced_txp); + rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, + lq_rate.index, 1, + i < retries ? 0 : legacy_success, + reduced_txp); + rs_collect_tlc_data(mvm, lq_sta, tmp_tbl, + lq_rate.index, 1, + i < retries ? 0 : legacy_success); } /* Update success/fail counts if not searching for new mode */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 8bf48a7d0f4e..0914ec2fd574 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1029,7 +1029,6 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); mvmsta->tid_data[tid].rate_n_flags = le32_to_cpu(tx_resp->initial_rate); - mvmsta->tid_data[tid].reduced_tpc = tx_resp->reduced_tpc; mvmsta->tid_data[tid].tx_time = le16_to_cpu(tx_resp->wireless_media_time); } @@ -1060,7 +1059,7 @@ static void iwl_mvm_tx_info_from_ba_notif(struct ieee80211_tx_info *info, /* TODO: not accounted if the whole A-MPDU failed */ info->status.tx_time = tid_data->tx_time; info->status.status_driver_data[0] = - (void *)(uintptr_t)tid_data->reduced_tpc; + (void *)(uintptr_t)ba_notif->reduced_txp; info->status.status_driver_data[1] = (void *)(uintptr_t)tid_data->rate_n_flags; } @@ -1133,6 +1132,8 @@ void iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb) scd_flow, ba_resp_scd_ssn, ba_notif->txed, ba_notif->txed_2_done); + IWL_DEBUG_TX_REPLY(mvm, "reduced txp from ba notif %d\n", + ba_notif->reduced_txp); tid_data->next_reclaimed = ba_resp_scd_ssn; iwl_mvm_check_ratid_empty(mvm, sta, tid); -- cgit v1.2.3 From 4dc236c31733f5d2a3872c88cf12f607d7d36905 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:16 +0100 Subject: mlxsw: spectrum: Handle port leaving LAG while bridged It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 30 +++++++++++++++++++--- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 1 + .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 8 ++++++ 3 files changed, 36 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index ce6845d534a8..637a9d72fd93 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2200,10 +2200,14 @@ err_col_port_enable: return err; } +static int mlxsw_sp_vport_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_vport, + struct net_device *br_dev); + static int mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *lag_dev) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + struct mlxsw_sp_port *mlxsw_sp_vport; struct mlxsw_sp_upper *lag; u16 lag_id = mlxsw_sp_port->lag_id; int err; @@ -2220,6 +2224,29 @@ static int mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port, if (err) return err; + /* In case we leave a LAG device that has bridges built on top, + * then their teardown sequence is never issued and we need to + * invoke the necessary cleanup routines ourselves. + */ + list_for_each_entry(mlxsw_sp_vport, &mlxsw_sp_port->vports_list, + vport.list) { + struct net_device *br_dev; + + if (!mlxsw_sp_vport->bridged) + continue; + + br_dev = mlxsw_sp_vport_br_get(mlxsw_sp_vport); + mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, br_dev); + } + + if (mlxsw_sp_port->bridged) { + mlxsw_sp_port_active_vlans_del(mlxsw_sp_port); + mlxsw_sp_port_bridge_leave(mlxsw_sp_port); + + if (lag->ref_count == 1) + mlxsw_sp_master_bridge_dec(mlxsw_sp, NULL); + } + if (lag->ref_count == 1) { err = mlxsw_sp_lag_destroy(mlxsw_sp, lag_id); if (err) @@ -2272,9 +2299,6 @@ static int mlxsw_sp_port_lag_changed(struct mlxsw_sp_port *mlxsw_sp_port, return mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port, info->tx_enabled); } -static int mlxsw_sp_vport_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_vport, - struct net_device *br_dev); - static int mlxsw_sp_port_vlan_link(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *vlan_dev) { diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index a23dc610d259..df279fc81c2e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -254,5 +254,6 @@ int mlxsw_sp_port_kill_vid(struct net_device *dev, __be16 __always_unused proto, u16 vid); int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 vfid, bool set, bool only_uc); +void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port); #endif diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 45479ef5bcf4..e4a3bd49069f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -936,6 +936,14 @@ static int mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port, vlan->vid_begin, vlan->vid_end, false); } +void mlxsw_sp_port_active_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port) +{ + u16 vid; + + for_each_set_bit(vid, mlxsw_sp_port->active_vlans, VLAN_N_VID) + __mlxsw_sp_port_vlans_del(mlxsw_sp_port, vid, vid, false); +} + static int mlxsw_sp_port_fdb_static_del(struct mlxsw_sp_port *mlxsw_sp_port, const struct switchdev_obj_port_fdb *fdb) -- cgit v1.2.3 From 419332713581f0cbec6414f5e779afb79ddee3dd Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:17 +0100 Subject: mlxsw: reg: Add the Switch Filtering DB Flush register When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 88 +++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 0c5237264e3e..815e5df06d8c 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1044,6 +1044,92 @@ static inline void mlxsw_reg_sftr_pack(char *payload, mlxsw_reg_sftr_port_mask_set(payload, port, 1); } +/* SFDF - Switch Filtering DB Flush + * -------------------------------- + * The switch filtering DB flush register is used to flush the FDB. + * Note that FDB notifications are flushed as well. + */ +#define MLXSW_REG_SFDF_ID 0x2013 +#define MLXSW_REG_SFDF_LEN 0x14 + +static const struct mlxsw_reg_info mlxsw_reg_sfdf = { + .id = MLXSW_REG_SFDF_ID, + .len = MLXSW_REG_SFDF_LEN, +}; + +/* reg_sfdf_swid + * Switch partition ID. + * Access: Index + */ +MLXSW_ITEM32(reg, sfdf, swid, 0x00, 24, 8); + +enum mlxsw_reg_sfdf_flush_type { + MLXSW_REG_SFDF_FLUSH_PER_SWID, + MLXSW_REG_SFDF_FLUSH_PER_FID, + MLXSW_REG_SFDF_FLUSH_PER_PORT, + MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID, + MLXSW_REG_SFDF_FLUSH_PER_LAG, + MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID, +}; + +/* reg_sfdf_flush_type + * Flush type. + * 0 - All SWID dynamic entries are flushed. + * 1 - All FID dynamic entries are flushed. + * 2 - All dynamic entries pointing to port are flushed. + * 3 - All FID dynamic entries pointing to port are flushed. + * 4 - All dynamic entries pointing to LAG are flushed. + * 5 - All FID dynamic entries pointing to LAG are flushed. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, flush_type, 0x04, 28, 4); + +/* reg_sfdf_flush_static + * Static. + * 0 - Flush only dynamic entries. + * 1 - Flush both dynamic and static entries. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, flush_static, 0x04, 24, 1); + +static inline void mlxsw_reg_sfdf_pack(char *payload, + enum mlxsw_reg_sfdf_flush_type type) +{ + MLXSW_REG_ZERO(sfdf, payload); + mlxsw_reg_sfdf_flush_type_set(payload, type); + mlxsw_reg_sfdf_flush_static_set(payload, true); +} + +/* reg_sfdf_fid + * FID to flush. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, fid, 0x0C, 0, 16); + +/* reg_sfdf_system_port + * Port to flush. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, system_port, 0x0C, 0, 16); + +/* reg_sfdf_port_fid_system_port + * Port to flush, pointed to by FID. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, port_fid_system_port, 0x08, 0, 16); + +/* reg_sfdf_lag_id + * LAG ID to flush. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, lag_id, 0x0C, 0, 10); + +/* reg_sfdf_lag_fid_lag_id + * LAG ID to flush, pointed to by FID. + * Access: RW + */ +MLXSW_ITEM32(reg, sfdf, lag_fid_lag_id, 0x08, 0, 10); + /* SLDR - Switch LAG Descriptor Register * ----------------------------------------- * The switch LAG descriptor register is populated by LAG descriptors. @@ -3121,6 +3207,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "SFGC"; case MLXSW_REG_SFTR_ID: return "SFTR"; + case MLXSW_REG_SFDF_ID: + return "SFDF"; case MLXSW_REG_SLDR_ID: return "SLDR"; case MLXSW_REG_SLCR_ID: -- cgit v1.2.3 From 039c49a6e6cf673a2bec572b3360209ec418a152 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:18 +0100 Subject: mlxsw: spectrum: Flush FDB when leaving bridge As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 137 +++++++++++++++++++++++-- 1 file changed, 129 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 637a9d72fd93..217856bdd400 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -1979,6 +1979,115 @@ static struct mlxsw_driver mlxsw_sp_driver = { .profile = &mlxsw_sp_config_profile, }; +static int +mlxsw_sp_port_fdb_flush_by_port(const struct mlxsw_sp_port *mlxsw_sp_port) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char sfdf_pl[MLXSW_REG_SFDF_LEN]; + + mlxsw_reg_sfdf_pack(sfdf_pl, MLXSW_REG_SFDF_FLUSH_PER_PORT); + mlxsw_reg_sfdf_system_port_set(sfdf_pl, mlxsw_sp_port->local_port); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfdf), sfdf_pl); +} + +static int +mlxsw_sp_port_fdb_flush_by_port_fid(const struct mlxsw_sp_port *mlxsw_sp_port, + u16 fid) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char sfdf_pl[MLXSW_REG_SFDF_LEN]; + + mlxsw_reg_sfdf_pack(sfdf_pl, MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID); + mlxsw_reg_sfdf_fid_set(sfdf_pl, fid); + mlxsw_reg_sfdf_port_fid_system_port_set(sfdf_pl, + mlxsw_sp_port->local_port); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfdf), sfdf_pl); +} + +static int +mlxsw_sp_port_fdb_flush_by_lag_id(const struct mlxsw_sp_port *mlxsw_sp_port) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char sfdf_pl[MLXSW_REG_SFDF_LEN]; + + mlxsw_reg_sfdf_pack(sfdf_pl, MLXSW_REG_SFDF_FLUSH_PER_LAG); + mlxsw_reg_sfdf_lag_id_set(sfdf_pl, mlxsw_sp_port->lag_id); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfdf), sfdf_pl); +} + +static int +mlxsw_sp_port_fdb_flush_by_lag_id_fid(const struct mlxsw_sp_port *mlxsw_sp_port, + u16 fid) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char sfdf_pl[MLXSW_REG_SFDF_LEN]; + + mlxsw_reg_sfdf_pack(sfdf_pl, MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID); + mlxsw_reg_sfdf_fid_set(sfdf_pl, fid); + mlxsw_reg_sfdf_lag_fid_lag_id_set(sfdf_pl, mlxsw_sp_port->lag_id); + + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfdf), sfdf_pl); +} + +static int +__mlxsw_sp_port_fdb_flush(const struct mlxsw_sp_port *mlxsw_sp_port) +{ + int err, last_err = 0; + u16 vid; + + for (vid = 1; vid < VLAN_N_VID - 1; vid++) { + err = mlxsw_sp_port_fdb_flush_by_port_fid(mlxsw_sp_port, vid); + if (err) + last_err = err; + } + + return last_err; +} + +static int +__mlxsw_sp_port_fdb_flush_lagged(const struct mlxsw_sp_port *mlxsw_sp_port) +{ + int err, last_err = 0; + u16 vid; + + for (vid = 1; vid < VLAN_N_VID - 1; vid++) { + err = mlxsw_sp_port_fdb_flush_by_lag_id_fid(mlxsw_sp_port, vid); + if (err) + last_err = err; + } + + return last_err; +} + +static int mlxsw_sp_port_fdb_flush(struct mlxsw_sp_port *mlxsw_sp_port) +{ + if (!list_empty(&mlxsw_sp_port->vports_list)) + if (mlxsw_sp_port->lagged) + return __mlxsw_sp_port_fdb_flush_lagged(mlxsw_sp_port); + else + return __mlxsw_sp_port_fdb_flush(mlxsw_sp_port); + else + if (mlxsw_sp_port->lagged) + return mlxsw_sp_port_fdb_flush_by_lag_id(mlxsw_sp_port); + else + return mlxsw_sp_port_fdb_flush_by_port(mlxsw_sp_port); +} + +static int mlxsw_sp_vport_fdb_flush(struct mlxsw_sp_port *mlxsw_sp_vport) +{ + u16 vfid = mlxsw_sp_vport_vfid_get(mlxsw_sp_vport); + u16 fid = mlxsw_sp_vfid_to_fid(vfid); + + if (mlxsw_sp_vport->lagged) + return mlxsw_sp_port_fdb_flush_by_lag_id_fid(mlxsw_sp_vport, + fid); + else + return mlxsw_sp_port_fdb_flush_by_port_fid(mlxsw_sp_vport, fid); +} + static bool mlxsw_sp_port_dev_check(const struct net_device *dev) { return dev->netdev_ops == &mlxsw_sp_port_netdev_ops; @@ -2006,10 +2115,14 @@ static int mlxsw_sp_port_bridge_join(struct mlxsw_sp_port *mlxsw_sp_port) return 0; } -static int mlxsw_sp_port_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_port) +static int mlxsw_sp_port_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_port, + bool flush_fdb) { struct net_device *dev = mlxsw_sp_port->dev; + if (flush_fdb && mlxsw_sp_port_fdb_flush(mlxsw_sp_port)) + netdev_err(mlxsw_sp_port->dev, "Failed to flush FDB\n"); + mlxsw_sp_port->learning = 0; mlxsw_sp_port->learning_sync = 0; mlxsw_sp_port->uc_flood = 0; @@ -2201,7 +2314,8 @@ err_col_port_enable: } static int mlxsw_sp_vport_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_vport, - struct net_device *br_dev); + struct net_device *br_dev, + bool flush_fdb); static int mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *lag_dev) @@ -2236,18 +2350,20 @@ static int mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port, continue; br_dev = mlxsw_sp_vport_br_get(mlxsw_sp_vport); - mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, br_dev); + mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, br_dev, false); } if (mlxsw_sp_port->bridged) { mlxsw_sp_port_active_vlans_del(mlxsw_sp_port); - mlxsw_sp_port_bridge_leave(mlxsw_sp_port); + mlxsw_sp_port_bridge_leave(mlxsw_sp_port, false); if (lag->ref_count == 1) mlxsw_sp_master_bridge_dec(mlxsw_sp, NULL); } if (lag->ref_count == 1) { + if (mlxsw_sp_port_fdb_flush_by_lag_id(mlxsw_sp_port)) + netdev_err(mlxsw_sp_port->dev, "Failed to flush FDB\n"); err = mlxsw_sp_lag_destroy(mlxsw_sp, lag_id); if (err) return err; @@ -2336,7 +2452,7 @@ static int mlxsw_sp_port_vlan_unlink(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *br_dev; br_dev = mlxsw_sp_vport_br_get(mlxsw_sp_vport); - mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, br_dev); + mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, br_dev, true); } mlxsw_sp_vport->dev = mlxsw_sp_port->dev; @@ -2398,7 +2514,8 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *dev, } mlxsw_sp_master_bridge_inc(mlxsw_sp, upper_dev); } else { - err = mlxsw_sp_port_bridge_leave(mlxsw_sp_port); + err = mlxsw_sp_port_bridge_leave(mlxsw_sp_port, + true); mlxsw_sp_master_bridge_dec(mlxsw_sp, upper_dev); if (err) { netdev_err(dev, "Failed to leave bridge\n"); @@ -2565,7 +2682,8 @@ static void mlxsw_sp_br_vfid_destroy(struct mlxsw_sp *mlxsw_sp, } static int mlxsw_sp_vport_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_vport, - struct net_device *br_dev) + struct net_device *br_dev, + bool flush_fdb) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_vport->mlxsw_sp; u16 vid = mlxsw_sp_vport_vid_get(mlxsw_sp_vport); @@ -2628,6 +2746,9 @@ static int mlxsw_sp_vport_bridge_leave(struct mlxsw_sp_port *mlxsw_sp_vport, goto err_vport_flood_set; } + if (flush_fdb && mlxsw_sp_vport_fdb_flush(mlxsw_sp_vport)) + netdev_err(dev, "Failed to flush FDB\n"); + /* Switch between the vFIDs and destroy the old one if needed. */ new_vfid->nr_vports++; mlxsw_sp_vport->vport.vfid = new_vfid; @@ -2801,7 +2922,7 @@ static int mlxsw_sp_netdevice_vport_event(struct net_device *dev, if (!mlxsw_sp_vport) return NOTIFY_DONE; err = mlxsw_sp_vport_bridge_leave(mlxsw_sp_vport, - upper_dev); + upper_dev, true); if (err) { netdev_err(dev, "Failed to leave bridge\n"); return NOTIFY_BAD; -- cgit v1.2.3 From 9cb026ebb8ab76829a8d8e4bbd057168ac38fb86 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:19 +0100 Subject: mlxsw: spectrum: Don't forward packets when STP state is DISABLED When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index e4a3bd49069f..5087e742dceb 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -124,7 +124,6 @@ static int mlxsw_sp_port_stp_state_set(struct mlxsw_sp_port *mlxsw_sp_port, int err; switch (state) { - case BR_STATE_DISABLED: /* fall-through */ case BR_STATE_FORWARDING: spms_state = MLXSW_REG_SPMS_STATE_FORWARDING; break; @@ -132,6 +131,7 @@ static int mlxsw_sp_port_stp_state_set(struct mlxsw_sp_port *mlxsw_sp_port, case BR_STATE_LEARNING: spms_state = MLXSW_REG_SPMS_STATE_LEARNING; break; + case BR_STATE_DISABLED: /* fall-through */ case BR_STATE_BLOCKING: spms_state = MLXSW_REG_SPMS_STATE_DISCARDING; break; -- cgit v1.2.3 From 454911333b1d86e1d58a557be271bc6b7e9e7f10 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:20 +0100 Subject: mlxsw: spectrum: Disable learning according to STP state When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 5087e742dceb..5e6095dd7d97 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -127,10 +127,10 @@ static int mlxsw_sp_port_stp_state_set(struct mlxsw_sp_port *mlxsw_sp_port, case BR_STATE_FORWARDING: spms_state = MLXSW_REG_SPMS_STATE_FORWARDING; break; - case BR_STATE_LISTENING: /* fall-through */ case BR_STATE_LEARNING: spms_state = MLXSW_REG_SPMS_STATE_LEARNING; break; + case BR_STATE_LISTENING: /* fall-through */ case BR_STATE_DISABLED: /* fall-through */ case BR_STATE_BLOCKING: spms_state = MLXSW_REG_SPMS_STATE_DISCARDING; -- cgit v1.2.3 From 45827d780aab533a777f965798018118b373cc0b Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:21 +0100 Subject: mlxsw: spectrum: Notify bridge's FDB only based on learning_sync When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 5e6095dd7d97..e1cbc59fced3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1202,14 +1202,14 @@ static const struct switchdev_ops mlxsw_sp_port_switchdev_ops = { .switchdev_port_obj_dump = mlxsw_sp_port_obj_dump, }; -static void mlxsw_sp_fdb_call_notifiers(bool learning, bool learning_sync, - bool adding, char *mac, u16 vid, +static void mlxsw_sp_fdb_call_notifiers(bool learning_sync, bool adding, + char *mac, u16 vid, struct net_device *dev) { struct switchdev_notifier_fdb_info info; unsigned long notifier_type; - if (learning && learning_sync) { + if (learning_sync) { info.addr = mac; info.vid = vid; notifier_type = adding ? SWITCHDEV_FDB_ADD : SWITCHDEV_FDB_DEL; @@ -1265,8 +1265,7 @@ do_fdb_op: if (!do_notification) return; - mlxsw_sp_fdb_call_notifiers(mlxsw_sp_port->learning, - mlxsw_sp_port->learning_sync, + mlxsw_sp_fdb_call_notifiers(mlxsw_sp_port->learning_sync, adding, mac, vid, mlxsw_sp_port->dev); return; @@ -1327,9 +1326,8 @@ do_fdb_op: if (!do_notification) return; - mlxsw_sp_fdb_call_notifiers(mlxsw_sp_port->learning, - mlxsw_sp_port->learning_sync, - adding, mac, vid, + mlxsw_sp_fdb_call_notifiers(mlxsw_sp_port->learning_sync, adding, mac, + vid, mlxsw_sp_lag_get(mlxsw_sp, lag_id)->dev); return; -- cgit v1.2.3 From 004f85ea8258a2ffecdeecd154bdbe08409c13a4 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:22 +0100 Subject: mlxsw: spectrum: Don't report VLAN for 802.1D FDB entries When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 31 +++++++++++----------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index e1cbc59fced3..26e85b759e89 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1051,7 +1051,7 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, switchdev_obj_dump_cb_t *cb) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; - u16 vport_vid = 0, vport_fid = 0; + u16 vport_fid = 0; char *sfd_pl; char mac[ETH_ALEN]; u16 fid; @@ -1072,7 +1072,6 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, tmp = mlxsw_sp_vport_vfid_get(mlxsw_sp_port); vport_fid = mlxsw_sp_vfid_to_fid(tmp); - vport_vid = mlxsw_sp_vport_vid_get(mlxsw_sp_port); } mlxsw_reg_sfd_pack(sfd_pl, MLXSW_REG_SFD_OP_QUERY_DUMP, 0); @@ -1096,12 +1095,13 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, mlxsw_reg_sfd_uc_unpack(sfd_pl, i, mac, &fid, &local_port); if (local_port == mlxsw_sp_port->local_port) { - if (vport_fid && vport_fid != fid) - continue; - else if (vport_fid) - fdb->vid = vport_vid; - else + if (vport_fid && vport_fid == fid) + fdb->vid = 0; + else if (!vport_fid && + !mlxsw_sp_fid_is_vfid(fid)) fdb->vid = fid; + else + continue; ether_addr_copy(fdb->addr, mac); fdb->ndm_state = NUD_REACHABLE; err = cb(&fdb->obj); @@ -1114,12 +1114,13 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, mac, &fid, &lag_id); if (mlxsw_sp_port == mlxsw_sp_lag_rep_port(mlxsw_sp, lag_id)) { - if (vport_fid && vport_fid != fid) - continue; - else if (vport_fid) - fdb->vid = vport_vid; - else + if (vport_fid && vport_fid == fid) + fdb->vid = 0; + else if (!vport_fid && + !mlxsw_sp_fid_is_vfid(fid)) fdb->vid = fid; + else + continue; ether_addr_copy(fdb->addr, mac); fdb->ndm_state = NUD_REACHABLE; err = cb(&fdb->obj); @@ -1245,7 +1246,7 @@ static void mlxsw_sp_fdb_notify_mac_process(struct mlxsw_sp *mlxsw_sp, netdev_err(mlxsw_sp_port->dev, "Failed to find a matching vPort following FDB notification\n"); goto just_remove; } - vid = mlxsw_sp_vport_vid_get(mlxsw_sp_vport); + vid = 0; /* Override the physical port with the vPort. */ mlxsw_sp_port = mlxsw_sp_vport; } else { @@ -1305,8 +1306,8 @@ static void mlxsw_sp_fdb_notify_mac_lag_process(struct mlxsw_sp *mlxsw_sp, goto just_remove; } - vid = mlxsw_sp_vport_vid_get(mlxsw_sp_vport); - lag_vid = vid; + lag_vid = mlxsw_sp_vport_vid_get(mlxsw_sp_vport); + vid = 0; /* Override the physical port with the vPort. */ mlxsw_sp_port = mlxsw_sp_vport; } else { -- cgit v1.2.3 From e43aca22ed039af235acc2ee0384f943c1fbfe83 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:23 +0100 Subject: mlxsw: spectrum: Use correct netdev when notifying bridge LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 26e85b759e89..3102c1422262 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1281,6 +1281,7 @@ static void mlxsw_sp_fdb_notify_mac_lag_process(struct mlxsw_sp *mlxsw_sp, bool adding) { struct mlxsw_sp_port *mlxsw_sp_port; + struct net_device *dev; char mac[ETH_ALEN]; u16 lag_vid = 0; u16 lag_id; @@ -1307,10 +1308,12 @@ static void mlxsw_sp_fdb_notify_mac_lag_process(struct mlxsw_sp *mlxsw_sp, } lag_vid = mlxsw_sp_vport_vid_get(mlxsw_sp_vport); + dev = mlxsw_sp_vport->dev; vid = 0; /* Override the physical port with the vPort. */ mlxsw_sp_port = mlxsw_sp_vport; } else { + dev = mlxsw_sp_lag_get(mlxsw_sp, lag_id)->dev; vid = fid; } @@ -1328,8 +1331,7 @@ do_fdb_op: if (!do_notification) return; mlxsw_sp_fdb_call_notifiers(mlxsw_sp_port->learning_sync, adding, mac, - vid, - mlxsw_sp_lag_get(mlxsw_sp, lag_id)->dev); + vid, dev); return; just_remove: -- cgit v1.2.3 From 304f51584f4591789539c0d37fc359bc129a4ff0 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:24 +0100 Subject: mlxsw: spectrum: Dump LAG FDB records only once LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 3102c1422262..2b8b3745eaf0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1048,7 +1048,8 @@ static struct mlxsw_sp_port *mlxsw_sp_lag_rep_port(struct mlxsw_sp *mlxsw_sp, static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, struct switchdev_obj_port_fdb *fdb, - switchdev_obj_dump_cb_t *cb) + switchdev_obj_dump_cb_t *cb, + struct net_device *orig_dev) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; u16 vport_fid = 0; @@ -1114,6 +1115,12 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, mac, &fid, &lag_id); if (mlxsw_sp_port == mlxsw_sp_lag_rep_port(mlxsw_sp, lag_id)) { + /* LAG records can only point to LAG + * devices or VLAN devices on top. + */ + if (!netif_is_lag_master(orig_dev) && + !is_vlan_dev(orig_dev)) + continue; if (vport_fid && vport_fid == fid) fdb->vid = 0; else if (!vport_fid && @@ -1185,7 +1192,8 @@ static int mlxsw_sp_port_obj_dump(struct net_device *dev, break; case SWITCHDEV_OBJ_ID_PORT_FDB: err = mlxsw_sp_port_fdb_dump(mlxsw_sp_port, - SWITCHDEV_OBJ_PORT_FDB(obj), cb); + SWITCHDEV_OBJ_PORT_FDB(obj), cb, + obj->orig_dev); break; default: err = -EOPNOTSUPP; -- cgit v1.2.3 From 3f47f867814cdb08cd43d4b82f95bfde4a9ae579 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:25 +0100 Subject: mlxsw: spectrum: Compare local ports instead of pointers When dumping the FDB we can't compare the actual pointers of the ports structs, as it's possible the struct represents a vPort instead of the underlying physical port. Solve this by comparing the local port number instead, as it's shared between the physical ports and all the vPorts on top of him. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 2b8b3745eaf0..f2ab7cd09cf3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1052,6 +1052,7 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, struct net_device *orig_dev) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + struct mlxsw_sp_port *tmp; u16 vport_fid = 0; char *sfd_pl; char mac[ETH_ALEN]; @@ -1113,8 +1114,9 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, case MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG: mlxsw_reg_sfd_uc_lag_unpack(sfd_pl, i, mac, &fid, &lag_id); - if (mlxsw_sp_port == - mlxsw_sp_lag_rep_port(mlxsw_sp, lag_id)) { + tmp = mlxsw_sp_lag_rep_port(mlxsw_sp, lag_id); + if (tmp && tmp->local_port == + mlxsw_sp_port->local_port) { /* LAG records can only point to LAG * devices or VLAN devices on top. */ -- cgit v1.2.3 From bbeeda27abc516af51ddd93c555b6324559dbb3b Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:20:26 +0100 Subject: mlxsw: reg: Use correct offset in field definiton The rx_lane, tx_lane and module fields in the PMLP register don't have an additional offset besides the base one (0x04), so set it to 0x00. Fixes: 4ec14b7634b2 ("mlxsw: Add interface to access registers and process events") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 815e5df06d8c..bb77e2207804 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1787,20 +1787,20 @@ MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8); * Module number. * Access: RW */ -MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0, false); +MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0x00, false); /* reg_pmlp_tx_lane * Tx Lane. When rxtx field is cleared, this field is used for Rx as well. * Access: RW */ -MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 16, false); +MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 0x00, false); /* reg_pmlp_rx_lane * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is * equal to Tx lane. * Access: RW */ -MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 24, false); +MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 0x00, false); static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port) { -- cgit v1.2.3 From c731f0e3493cc9031a0aceea6a50c70beed23e6d Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 25 Jan 2016 23:24:12 +0100 Subject: net: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger Signed-off-by: David S. Miller --- drivers/net/ethernet/ezchip/Kconfig | 1 + drivers/net/phy/Kconfig | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig index 48ecbc8aaaea..b423ad380b6a 100644 --- a/drivers/net/ethernet/ezchip/Kconfig +++ b/drivers/net/ethernet/ezchip/Kconfig @@ -18,6 +18,7 @@ if NET_VENDOR_EZCHIP config EZCHIP_NPS_MANAGEMENT_ENET tristate "EZchip NPS management enet support" depends on OF_IRQ && OF_NET + depends on HAS_IOMEM ---help--- Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 60994a83a0d6..f0a77020037a 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -186,6 +186,7 @@ config MDIO_GPIO config MDIO_OCTEON tristate "Support for MDIO buses on Octeon and ThunderX SOCs" depends on 64BIT + depends on HAS_IOMEM help This module provides a driver for the Octeon and ThunderX MDIO -- cgit v1.2.3 From 6ed742363b9c3d1d038f013591d57a606ae2c261 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 26 Jan 2016 15:12:30 +0100 Subject: of: of_mdio: Ensure mdio device is a PHY of_phy_find_device() is used to find the phy device associated with a device node. It is expected the node is for a PHY device, but in fact it could of been probed as a generic MDIO device. Ensure the device is a PHY before returning it. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Reported-by: Aaro Koskinen Reported-by: Olof Johansson Signed-off-by: Andrew Lunn Tested-by: Aaro Koskinen Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 86829f8064a6..b5aa004a24b6 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -256,11 +256,19 @@ static int of_phy_match(struct device *dev, void *phy_np) struct phy_device *of_phy_find_device(struct device_node *phy_np) { struct device *d; + struct mdio_device *mdiodev; + if (!phy_np) return NULL; d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match); - return d ? to_phy_device(d) : NULL; + if (d) { + mdiodev = to_mdio_device(d); + if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) + return to_phy_device(d); + } + + return NULL; } EXPORT_SYMBOL(of_phy_find_device); -- cgit v1.2.3 From 3b89624ab54b9dc2d92fc08ce2670e5f19ad8ec8 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Tue, 26 Jan 2016 16:12:35 +0100 Subject: net: mv643xx_eth: fix packet corruption with TSO and tiny unaligned packets. The code in txq_put_data() would use txq->tx_curr_desc to index the tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned fragments, which is already moved to the next descriptor at the beginning of the function. If that fragment was the last of the the skb, the next skb would use that same space to place the ip headers, overwritting that small fragment data. Fixes: 91986fd3d335 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path) Signed-off-by: Nicolas Schichan Reviewed-by: Philipp Kirchhofer Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index a0c03834a2f7..55831188bc32 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -762,10 +762,10 @@ txq_put_data_tso(struct net_device *dev, struct tx_queue *txq, if (length <= 8 && (uintptr_t)data & 0x7) { /* Copy unaligned small data fragment to TSO header data area */ - memcpy(txq->tso_hdrs + txq->tx_curr_desc * TSO_HEADER_SIZE, + memcpy(txq->tso_hdrs + tx_index * TSO_HEADER_SIZE, data, length); desc->buf_ptr = txq->tso_hdrs_dma - + txq->tx_curr_desc * TSO_HEADER_SIZE; + + tx_index * TSO_HEADER_SIZE; } else { /* Alignment is okay, map buffer and hand off to hardware */ txq->tx_desc_mapping[tx_index] = DESC_DMA_MAP_SINGLE; -- cgit v1.2.3 From 7d0105b5334b9722b7d33acad613096dfcf3330e Mon Sep 17 00:00:00 2001 From: Malcolm Crossley Date: Tue, 26 Jan 2016 17:12:44 +0000 Subject: xen-netfront: request Tx response events more often Trying to batch Tx response events results in poor performance because this delays freeing the transmitted skbs. Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be notified once the next Tx response is placed on the ring. Signed-off-by: Malcolm Crossley Signed-off-by: David Vrabel Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index d6abf191122a..96ccd4e943db 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -364,6 +364,7 @@ static void xennet_tx_buf_gc(struct netfront_queue *queue) RING_IDX cons, prod; unsigned short id; struct sk_buff *skb; + bool more_to_do; BUG_ON(!netif_carrier_ok(queue->info->netdev)); @@ -398,18 +399,8 @@ static void xennet_tx_buf_gc(struct netfront_queue *queue) queue->tx.rsp_cons = prod; - /* - * Set a new event, then check for race with update of tx_cons. - * Note that it is essential to schedule a callback, no matter - * how few buffers are pending. Even if there is space in the - * transmit ring, higher layers may be blocked because too much - * data is outstanding: in such cases notification from Xen is - * likely to be the only kick that we'll get. - */ - queue->tx.sring->rsp_event = - prod + ((queue->tx.sring->req_prod - prod) >> 1) + 1; - mb(); /* update shared area */ - } while ((cons == prod) && (prod != queue->tx.sring->rsp_prod)); + RING_FINAL_CHECK_FOR_RESPONSES(&queue->tx, more_to_do); + } while (more_to_do); xennet_maybe_wake_tx(queue); } -- cgit v1.2.3 From 4f2c6ae5c64c353fb1b0425e4747e5603feadba1 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 27 Jan 2016 15:16:43 +0100 Subject: switchdev: Require RTNL mutex to be held when sending FDB notifications When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c281234 ("switchdev: introduce switchdev notifier") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 1 - drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 8 +++----- drivers/net/ethernet/rocker/rocker.c | 2 ++ net/bridge/br.c | 3 +-- net/switchdev/switchdev.c | 15 ++++++++------- 5 files changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index df279fc81c2e..7f42eb1c320e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -120,7 +120,6 @@ struct mlxsw_sp { } fdb_notify; #define MLXSW_SP_DEFAULT_AGEING_TIME 300 u32 ageing_time; - struct mutex fdb_lock; /* Make sure FDB sessions are atomic. */ struct mlxsw_sp_upper master_bridge; struct mlxsw_sp_upper lags[MLXSW_SP_LAG_MAX]; }; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index f2ab7cd09cf3..e492ca2cdecd 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include "spectrum.h" @@ -1068,7 +1069,6 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, if (!sfd_pl) return -ENOMEM; - mutex_lock(&mlxsw_sp_port->mlxsw_sp->fdb_lock); if (mlxsw_sp_port_is_vport(mlxsw_sp_port)) { u16 tmp; @@ -1142,7 +1142,6 @@ static int mlxsw_sp_port_fdb_dump(struct mlxsw_sp_port *mlxsw_sp_port, } while (num_rec == MLXSW_REG_SFD_REC_MAX_COUNT); out: - mutex_unlock(&mlxsw_sp_port->mlxsw_sp->fdb_lock); kfree(sfd_pl); return stored_err ? stored_err : err; } @@ -1393,7 +1392,7 @@ static void mlxsw_sp_fdb_notify_work(struct work_struct *work) mlxsw_sp = container_of(work, struct mlxsw_sp, fdb_notify.dw.work); - mutex_lock(&mlxsw_sp->fdb_lock); + rtnl_lock(); do { mlxsw_reg_sfn_pack(sfn_pl); err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(sfn), sfn_pl); @@ -1406,7 +1405,7 @@ static void mlxsw_sp_fdb_notify_work(struct work_struct *work) mlxsw_sp_fdb_notify_rec_process(mlxsw_sp, sfn_pl, i); } while (num_rec); - mutex_unlock(&mlxsw_sp->fdb_lock); + rtnl_unlock(); kfree(sfn_pl); mlxsw_sp_fdb_notify_work_schedule(mlxsw_sp); @@ -1421,7 +1420,6 @@ static int mlxsw_sp_fdb_init(struct mlxsw_sp *mlxsw_sp) dev_err(mlxsw_sp->bus_info->dev, "Failed to set default ageing time\n"); return err; } - mutex_init(&mlxsw_sp->fdb_lock); INIT_DELAYED_WORK(&mlxsw_sp->fdb_notify.dw, mlxsw_sp_fdb_notify_work); mlxsw_sp->fdb_notify.interval = MLXSW_SP_DEFAULT_LEARNING_INTERVAL; mlxsw_sp_fdb_notify_work_schedule(mlxsw_sp); diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c index a4ab71d43e4e..166a7fc87e2f 100644 --- a/drivers/net/ethernet/rocker/rocker.c +++ b/drivers/net/ethernet/rocker/rocker.c @@ -3531,12 +3531,14 @@ static void rocker_port_fdb_learn_work(struct work_struct *work) info.addr = lw->addr; info.vid = lw->vid; + rtnl_lock(); if (learned && removing) call_switchdev_notifiers(SWITCHDEV_FDB_DEL, lw->rocker_port->dev, &info.info); else if (learned && !removing) call_switchdev_notifiers(SWITCHDEV_FDB_ADD, lw->rocker_port->dev, &info.info); + rtnl_unlock(); rocker_port_kfree(lw->trans, work); } diff --git a/net/bridge/br.c b/net/bridge/br.c index a1abe4936fe1..3addc05b9a16 100644 --- a/net/bridge/br.c +++ b/net/bridge/br.c @@ -121,6 +121,7 @@ static struct notifier_block br_device_notifier = { .notifier_call = br_device_event }; +/* called with RTNL */ static int br_switchdev_event(struct notifier_block *unused, unsigned long event, void *ptr) { @@ -130,7 +131,6 @@ static int br_switchdev_event(struct notifier_block *unused, struct switchdev_notifier_fdb_info *fdb_info; int err = NOTIFY_DONE; - rtnl_lock(); p = br_port_get_rtnl(dev); if (!p) goto out; @@ -155,7 +155,6 @@ static int br_switchdev_event(struct notifier_block *unused, } out: - rtnl_unlock(); return err; } diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index ebc661d3b6e3..47f7da58a7f0 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -567,7 +568,6 @@ int switchdev_port_obj_dump(struct net_device *dev, struct switchdev_obj *obj, } EXPORT_SYMBOL_GPL(switchdev_port_obj_dump); -static DEFINE_MUTEX(switchdev_mutex); static RAW_NOTIFIER_HEAD(switchdev_notif_chain); /** @@ -582,9 +582,9 @@ int register_switchdev_notifier(struct notifier_block *nb) { int err; - mutex_lock(&switchdev_mutex); + rtnl_lock(); err = raw_notifier_chain_register(&switchdev_notif_chain, nb); - mutex_unlock(&switchdev_mutex); + rtnl_unlock(); return err; } EXPORT_SYMBOL_GPL(register_switchdev_notifier); @@ -600,9 +600,9 @@ int unregister_switchdev_notifier(struct notifier_block *nb) { int err; - mutex_lock(&switchdev_mutex); + rtnl_lock(); err = raw_notifier_chain_unregister(&switchdev_notif_chain, nb); - mutex_unlock(&switchdev_mutex); + rtnl_unlock(); return err; } EXPORT_SYMBOL_GPL(unregister_switchdev_notifier); @@ -616,16 +616,17 @@ EXPORT_SYMBOL_GPL(unregister_switchdev_notifier); * Call all network notifier blocks. This should be called by driver * when it needs to propagate hardware event. * Return values are same as for atomic_notifier_call_chain(). + * rtnl_lock must be held. */ int call_switchdev_notifiers(unsigned long val, struct net_device *dev, struct switchdev_notifier_info *info) { int err; + ASSERT_RTNL(); + info->dev = dev; - mutex_lock(&switchdev_mutex); err = raw_notifier_call_chain(&switchdev_notif_chain, val, info); - mutex_unlock(&switchdev_mutex); return err; } EXPORT_SYMBOL_GPL(call_switchdev_notifiers); -- cgit v1.2.3 From e4953910aee0c1a8f7f0fff598354948c2702900 Mon Sep 17 00:00:00 2001 From: "Woojung.Huh@microchip.com" Date: Wed, 27 Jan 2016 22:57:52 +0000 Subject: lan78xx: change to use updated phy-ignore-interrupts Update lan78xx to use patch of commit 4f2aaf7dd95b ("Merge branch 'fix-phy-ignore-interrupts'"). Signed-off-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 2ed53331bfb2..027ee373860e 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -36,7 +36,7 @@ #define DRIVER_AUTHOR "WOOJUNG HUH " #define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices" #define DRIVER_NAME "lan78xx" -#define DRIVER_VERSION "1.0.1" +#define DRIVER_VERSION "1.0.2" #define TX_TIMEOUT_JIFFIES (5 * HZ) #define THROTTLE_JIFFIES (HZ / 8) @@ -904,7 +904,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) if (!phydev->link && dev->link_on) { dev->link_on = false; - netif_carrier_off(dev->net); /* reset MAC */ ret = lan78xx_read_reg(dev, MAC_CR, &buf); @@ -914,6 +913,8 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) ret = lan78xx_write_reg(dev, MAC_CR, buf); if (unlikely(ret < 0)) return -EIO; + + phy_mac_interrupt(phydev, 0); } else if (phydev->link && !dev->link_on) { dev->link_on = true; @@ -953,7 +954,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) ethtool_cmd_speed(&ecmd), ecmd.duplex, ladv, radv); ret = lan78xx_update_flowcontrol(dev, ecmd.duplex, ladv, radv); - netif_carrier_on(dev->net); + phy_mac_interrupt(phydev, 1); } return ret; @@ -1495,7 +1496,6 @@ done: static int lan78xx_mdio_init(struct lan78xx_net *dev) { int ret; - int i; dev->mdiobus = mdiobus_alloc(); if (!dev->mdiobus) { @@ -1511,10 +1511,6 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev) snprintf(dev->mdiobus->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", dev->udev->bus->busnum, dev->udev->devnum); - /* handle our own interrupt */ - for (i = 0; i < PHY_MAX_ADDR; i++) - dev->mdiobus->irq[i] = PHY_IGNORE_INTERRUPT; - switch (dev->devid & ID_REV_CHIP_ID_MASK_) { case 0x78000000: case 0x78500000: @@ -1558,6 +1554,16 @@ static int lan78xx_phy_init(struct lan78xx_net *dev) return -EIO; } + /* Enable PHY interrupts. + * We handle our own interrupt + */ + ret = phy_read(phydev, LAN88XX_INT_STS); + ret = phy_write(phydev, LAN88XX_INT_MASK, + LAN88XX_INT_MASK_MDINTPIN_EN_ | + LAN88XX_INT_MASK_LINK_CHANGE_); + + phydev->irq = PHY_IGNORE_INTERRUPT; + ret = phy_connect_direct(dev->net, phydev, lan78xx_link_status_change, PHY_INTERFACE_MODE_GMII); @@ -1580,14 +1586,6 @@ static int lan78xx_phy_init(struct lan78xx_net *dev) SUPPORTED_Pause | SUPPORTED_Asym_Pause); genphy_config_aneg(phydev); - /* Workaround to enable PHY interrupt. - * phy_start_interrupts() is API for requesting and enabling - * PHY interrupt. However, USB-to-Ethernet device can't use - * request_irq() called in phy_start_interrupts(). - * Set PHY to PHY_HALTED and call phy_start() - * to make a call to phy_enable_interrupts() - */ - phy_stop(phydev); phy_start(phydev); netif_dbg(dev, ifup, dev->net, "phy initialised successfully"); -- cgit v1.2.3 From a0db7d10b76e98df0cb5d4ee1ec5b8e5fbe2038c Mon Sep 17 00:00:00 2001 From: "Woojung.Huh@microchip.com" Date: Wed, 27 Jan 2016 22:57:53 +0000 Subject: lan78xx: Add to handle mux control per chip id Depends on chip, some EEPROM pins are muxed with LED function. Disable & restore LED function to access EEPROM. Signed-off-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 98 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 71 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 027ee373860e..650e71604d86 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -462,32 +462,53 @@ static int lan78xx_read_raw_eeprom(struct lan78xx_net *dev, u32 offset, u32 length, u8 *data) { u32 val; + u32 saved; int i, ret; + int retval; - ret = lan78xx_eeprom_confirm_not_busy(dev); - if (ret) - return ret; + /* depends on chip, some EEPROM pins are muxed with LED function. + * disable & restore LED function to access EEPROM. + */ + ret = lan78xx_read_reg(dev, HW_CFG, &val); + saved = val; + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) { + val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_); + ret = lan78xx_write_reg(dev, HW_CFG, val); + } + + retval = lan78xx_eeprom_confirm_not_busy(dev); + if (retval) + return retval; for (i = 0; i < length; i++) { val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_; val |= (offset & E2P_CMD_EPC_ADDR_MASK_); ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; ret = lan78xx_read_reg(dev, E2P_DATA, &val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } data[i] = val & 0xFF; offset++; } - return 0; + retval = 0; +exit: + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) + ret = lan78xx_write_reg(dev, HW_CFG, saved); + + return retval; } static int lan78xx_read_eeprom(struct lan78xx_net *dev, u32 offset, @@ -509,44 +530,67 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset, u32 length, u8 *data) { u32 val; + u32 saved; int i, ret; + int retval; - ret = lan78xx_eeprom_confirm_not_busy(dev); - if (ret) - return ret; + /* depends on chip, some EEPROM pins are muxed with LED function. + * disable & restore LED function to access EEPROM. + */ + ret = lan78xx_read_reg(dev, HW_CFG, &val); + saved = val; + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) { + val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_); + ret = lan78xx_write_reg(dev, HW_CFG, val); + } + + retval = lan78xx_eeprom_confirm_not_busy(dev); + if (retval) + goto exit; /* Issue write/erase enable command */ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_; ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (unlikely(ret < 0)) - return -EIO; + if (unlikely(ret < 0)) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; for (i = 0; i < length; i++) { /* Fill data register */ val = data[i]; ret = lan78xx_write_reg(dev, E2P_DATA, val); - if (ret < 0) - return ret; + if (ret < 0) { + retval = -EIO; + goto exit; + } /* Send "write" command */ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_; val |= (offset & E2P_CMD_EPC_ADDR_MASK_); ret = lan78xx_write_reg(dev, E2P_CMD, val); - if (ret < 0) - return ret; + if (ret < 0) { + retval = -EIO; + goto exit; + } - ret = lan78xx_wait_eeprom(dev); - if (ret < 0) - return ret; + retval = lan78xx_wait_eeprom(dev); + if (retval < 0) + goto exit; offset++; } - return 0; + retval = 0; +exit: + if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) + ret = lan78xx_write_reg(dev, HW_CFG, saved); + + return retval; } static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset, -- cgit v1.2.3 From 4b2a4a965331a8ce7303b43039ce43651ef80fb0 Mon Sep 17 00:00:00 2001 From: "Woojung.Huh@microchip.com" Date: Wed, 27 Jan 2016 22:57:54 +0000 Subject: lan78xx: throttle TX path at slower than SuperSpeed USB Throttle TX path only at slower than SuperSpeed USB. SuperSpeed USB has enough bandwidth to maintain GigE. Signed-off-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 650e71604d86..1c299b8a162d 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2263,7 +2263,9 @@ netdev_tx_t lan78xx_start_xmit(struct sk_buff *skb, struct net_device *net) if (skb2) { skb_queue_tail(&dev->txq_pend, skb2); - if (skb_queue_len(&dev->txq_pend) > 10) + /* throttle TX patch at slower than SUPER SPEED USB */ + if ((dev->udev->speed < USB_SPEED_SUPER) && + (skb_queue_len(&dev->txq_pend) > 10)) netif_stop_queue(net); } else { netif_dbg(dev, tx_err, dev->net, -- cgit v1.2.3 From ae461131960b27d4be158d62a89d40977388d7a1 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 28 Jan 2016 02:30:29 +0100 Subject: of: of_mdio: Add a whitelist of PHY compatibilities. Some phy nodes list a compatible value indicating the PHY make/model. This is never used to match the device to the driver. However it does confuse the code to separate a PHY from a generic MDIO device like a switch. Generic MDIO devices must have a compatible value, PHYs can list clause 22 or 45, but nothing else. Issue a warning if we find a compatible value known on the whitelist, and say it is a PHY. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Reported-by: Aaro Koskinen Reported-by: Olof Johansson Tested-by: Aaro Koskinen Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index b5aa004a24b6..5648317d355f 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -143,11 +143,31 @@ int of_mdio_parse_addr(struct device *dev, const struct device_node *np) } EXPORT_SYMBOL(of_mdio_parse_addr); +/* The following is a list of PHY compatible strings which appear in + * some DTBs. The compatible string is never matched against a PHY + * driver, so is pointless. We only expect devices which are not PHYs + * to have a compatible string, so they can be matched to an MDIO + * driver. Encourage users to upgrade their DT blobs to remove these. + */ +static const struct of_device_id whitelist_phys[] = { + { .compatible = "brcm,40nm-ephy" }, + { .compatible = "marvell,88E1111", }, + { .compatible = "marvell,88e1116", }, + { .compatible = "marvell,88e1118", }, + { .compatible = "marvell,88e1149r", }, + { .compatible = "marvell,88e1310", }, + { .compatible = "marvell,88E1510", }, + { .compatible = "marvell,88E1514", }, + { .compatible = "moxa,moxart-rtl8201cp", }, + {} +}; + /* * Return true if the child node is for a phy. It must either: * o Compatible string of "ethernet-phy-idX.X" * o Compatible string of "ethernet-phy-ieee802.3-c45" * o Compatible string of "ethernet-phy-ieee802.3-c22" + * o In the white list above (and issue a warning) * o No compatibility string * * A device which is not a phy is expected to have a compatible string @@ -166,6 +186,13 @@ static bool of_mdiobus_child_is_phy(struct device_node *child) if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22")) return true; + if (of_match_node(whitelist_phys, child)) { + pr_warn(FW_WARN + "%s: Whitelisted compatible string. Please remove\n", + child->full_name); + return true; + } + if (!of_find_property(child, "compatible", NULL)) return true; -- cgit v1.2.3 From 286af315d3f153595ce718fb1e442891f14ed5c0 Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Wed, 27 Jan 2016 17:34:37 +0800 Subject: net: cavium: liquidio: use helpers ns_to_timespec64() Convert the driver to use ns_to_timespec64() to keep consistency with timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Kefeng Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/lio_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index b89504405b72..872765527081 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -1526,7 +1526,6 @@ static int liquidio_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) { u64 ns; - u32 remainder; unsigned long flags; struct lio *lio = container_of(ptp, struct lio, ptp_info); struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; @@ -1536,8 +1535,7 @@ static int liquidio_ptp_gettime(struct ptp_clock_info *ptp, ns += lio->ptp_adjust; spin_unlock_irqrestore(&lio->ptp_lock, flags); - ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder); - ts->tv_nsec = remainder; + *ts = ns_to_timespec64(ns); return 0; } -- cgit v1.2.3 From de7d244d0a351f27cfef5f51088ea9a64054c948 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 27 Jan 2016 17:50:43 +0100 Subject: macvlan: make operstate and carrier more accurate Currently when a macvlan is being initialized and the lower device is netif_carrier_ok(), the macvlan device doesn't run through rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an unconditional linkwatch event for the new macvlan device. Similar fix is already used by the 8021q device (see register_vlan_dev()). Also fix the inconsistent state when the lower device has been down and its carrier was changed (when a device is down NETDEV_CHANGE doesn't get generated). The second issue can be seen f.e. when we have a macvlan on top of a 8021q device which has been down and its real device has been changing carrier states, after setting the 8021q device up, the macvlan device will have the same carrier state as it was before even though the 8021q can now have a different state. Example for case 1: 4: eth2: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 $ ip l add l eth2 macvl0 type macvlan $ ip l set macvl0 up $ ip l sh macvl0 72: macvl0@eth2: mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff Example for case 2 (order is important): Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down $ ip l set vlan1-macvlan up $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff [ eth2 loses CARRIER before vlan1 has been UP-ed ] $ ip l sh eth2 4: eth2: mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff $ ip l set vlan1 up $ ip l sh vlan1 70: vlan1@eth2: mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff vlan1-macvlan is still UP, still has carrier and is still in the same operstate as before. After the patch in case 1 macvl0 has state UP as it should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it should. Note that while the lower macvlan device is down their carrier and thus operstate can go out of sync but that will be fixed once the lower device goes up again. This behaviour seems to have been present since beginning of git history. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 6a57a005e0ca..94e688805dd2 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1323,6 +1323,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, list_add_tail_rcu(&vlan->list, &port->vlans); netif_stacked_transfer_operstate(lowerdev, dev); + linkwatch_fire_event(dev); return 0; @@ -1522,6 +1523,7 @@ static int macvlan_device_event(struct notifier_block *unused, port = macvlan_port_get_rtnl(dev); switch (event) { + case NETDEV_UP: case NETDEV_CHANGE: list_for_each_entry(vlan, &port->vlans, list) netif_stacked_transfer_operstate(vlan->lowerdev, -- cgit v1.2.3 From b83ef507d9e2bc25cea40b1fb13ebd1ca7c4969a Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Thu, 28 Jan 2016 10:27:19 +0800 Subject: ptp: ixp46x: use helpers for converting ns to timespec Convert the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Signed-off-by: Kefeng Wang Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_ixp46x.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/ptp/ptp_ixp46x.c index 934c139916c6..ee4f183ef9ee 100644 --- a/drivers/ptp/ptp_ixp46x.c +++ b/drivers/ptp/ptp_ixp46x.c @@ -178,7 +178,6 @@ static int ptp_ixp_adjtime(struct ptp_clock_info *ptp, s64 delta) static int ptp_ixp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) { u64 ns; - u32 remainder; unsigned long flags; struct ixp_clock *ixp_clock = container_of(ptp, struct ixp_clock, caps); struct ixp46x_ts_regs *regs = ixp_clock->regs; @@ -189,8 +188,7 @@ static int ptp_ixp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) spin_unlock_irqrestore(®ister_lock, flags); - ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder); - ts->tv_nsec = remainder; + *ts = ns_to_timespec64(ns); return 0; } @@ -202,8 +200,7 @@ static int ptp_ixp_settime(struct ptp_clock_info *ptp, struct ixp_clock *ixp_clock = container_of(ptp, struct ixp_clock, caps); struct ixp46x_ts_regs *regs = ixp_clock->regs; - ns = ts->tv_sec * 1000000000ULL; - ns += ts->tv_nsec; + ns = timespec64_to_ns(ts); spin_lock_irqsave(®ister_lock, flags); -- cgit v1.2.3 From 74608fc98d2856fa7201a498b61c9dd9455b504a Mon Sep 17 00:00:00 2001 From: Prashant Sreedharan Date: Thu, 28 Jan 2016 03:11:20 -0500 Subject: bnxt_en: Ring free response from close path should use completion ring Use completion ring for ring free response from firmware. The response will be the last entry in the ring and we can free the ring after getting the response. This will guarantee no spurious DMA to freed memory. Signed-off-by: Prashant Sreedharan Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index df835f5e46d8..17dcacd3ad43 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -3406,7 +3406,7 @@ static int hwrm_ring_free_send_msg(struct bnxt *bp, struct hwrm_ring_free_output *resp = bp->hwrm_cmd_resp_addr; u16 error_code; - bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_RING_FREE, -1, -1); + bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_RING_FREE, cmpl_ring_id, -1); req.ring_type = ring_type; req.ring_id = cpu_to_le16(ring->fw_ring_id); -- cgit v1.2.3 From 8a4d4c8dde7a4119bce3fd8287dca193ff6356da Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 28 Jan 2016 03:11:21 -0500 Subject: bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter. This hardware counter is misleading as it counts dropped packets that don't match the hardware filters for unicast/broadcast/multicast. We will still report this counter in ethtool -S for diagnostics purposes. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 17dcacd3ad43..ebc541340ea1 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4819,8 +4819,6 @@ bnxt_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) stats->multicast += le64_to_cpu(hw_stats->rx_mcast_pkts); - stats->rx_dropped += le64_to_cpu(hw_stats->rx_drop_pkts); - stats->tx_dropped += le64_to_cpu(hw_stats->tx_drop_pkts); } -- cgit v1.2.3 From d612a579771385e08f7b665063b36bfa52c03ea3 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 28 Jan 2016 03:11:22 -0500 Subject: bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout. The ring index j is not wrapped properly at the end of the ring, causing it to reference pointers past the end of the ring. For proper loop termination and to access the ring properly, we need to increment j and mask it before referencing the ring entry. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index ebc541340ea1..5dc89e527e7d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1490,10 +1490,11 @@ static void bnxt_free_tx_skbs(struct bnxt *bp) last = tx_buf->nr_frags; j += 2; - for (k = 0; k < last; k++, j = NEXT_TX(j)) { + for (k = 0; k < last; k++, j++) { + int ring_idx = j & bp->tx_ring_mask; skb_frag_t *frag = &skb_shinfo(skb)->frags[k]; - tx_buf = &txr->tx_buf_ring[j]; + tx_buf = &txr->tx_buf_ring[ring_idx]; dma_unmap_page( &pdev->dev, dma_unmap_addr(tx_buf, mapping), -- cgit v1.2.3 From 59a557be385b66c1da20e9cfc6ff6c2e676c6804 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 Jan 2016 17:54:33 +0100 Subject: net: moxart: use correct accessors for DMA memory The moxart ethernet driver confuses coherent DMA buffers with MMIO registers. moxart_ether.c: In function 'moxart_mac_setup_desc_ring': moxart_ether.c:146:428: error: passing argument 1 of '__fswab32' makes integer from pointer without a cast [-Werror=int-conversion] moxart_ether.c:74:39: warning: incorrect type in argument 3 (different address spaces) moxart_ether.c:74:39: expected void *cpu_addr moxart_ether.c:74:39: got void [noderef] *tx_desc_base This leaves the basic logic alone and uses normal pointers for the virtual address of the descriptor. As we cannot use readl/writel to access them, we also introduce our own moxart_desc_read moxart_desc_write helpers that perform the same endianess swap as the original code, but without the address space conversion. The barriers are made explicit here where needed: Even in the worst-case scenario, we just have to use a rmb() after checking ownership so we don't read any input data before we are sure it is value, and we use wmb() before transferring ownership back to the device. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 46 +++++++++++++++++++++----------- drivers/net/ethernet/moxa/moxart_ether.h | 4 +-- 2 files changed, 32 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index a10c928bbd6b..00cfd95ca59d 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -28,6 +28,16 @@ #include "moxart_ether.h" +static inline void moxart_desc_write(u32 data, u32 *desc) +{ + *desc = cpu_to_le32(data); +} + +static inline u32 moxart_desc_read(u32 *desc) +{ + return le32_to_cpu(*desc); +} + static inline void moxart_emac_write(struct net_device *ndev, unsigned int reg, unsigned long value) { @@ -112,7 +122,7 @@ static void moxart_mac_enable(struct net_device *ndev) static void moxart_mac_setup_desc_ring(struct net_device *ndev) { struct moxart_mac_priv_t *priv = netdev_priv(ndev); - void __iomem *desc; + void *desc; int i; for (i = 0; i < TX_DESC_NUM; i++) { @@ -121,7 +131,7 @@ static void moxart_mac_setup_desc_ring(struct net_device *ndev) priv->tx_buf[i] = priv->tx_buf_base + priv->tx_buf_size * i; } - writel(TX_DESC1_END, desc + TX_REG_OFFSET_DESC1); + moxart_desc_write(TX_DESC1_END, desc + TX_REG_OFFSET_DESC1); priv->tx_head = 0; priv->tx_tail = 0; @@ -129,8 +139,8 @@ static void moxart_mac_setup_desc_ring(struct net_device *ndev) for (i = 0; i < RX_DESC_NUM; i++) { desc = priv->rx_desc_base + i * RX_REG_DESC_SIZE; memset(desc, 0, RX_REG_DESC_SIZE); - writel(RX_DESC0_DMA_OWN, desc + RX_REG_OFFSET_DESC0); - writel(RX_BUF_SIZE & RX_DESC1_BUF_SIZE_MASK, + moxart_desc_write(RX_DESC0_DMA_OWN, desc + RX_REG_OFFSET_DESC0); + moxart_desc_write(RX_BUF_SIZE & RX_DESC1_BUF_SIZE_MASK, desc + RX_REG_OFFSET_DESC1); priv->rx_buf[i] = priv->rx_buf_base + priv->rx_buf_size * i; @@ -141,12 +151,12 @@ static void moxart_mac_setup_desc_ring(struct net_device *ndev) if (dma_mapping_error(&ndev->dev, priv->rx_mapping[i])) netdev_err(ndev, "DMA mapping error\n"); - writel(priv->rx_mapping[i], + moxart_desc_write(priv->rx_mapping[i], desc + RX_REG_OFFSET_DESC2 + RX_DESC2_ADDRESS_PHYS); - writel(priv->rx_buf[i], + moxart_desc_write((uintptr_t)priv->rx_buf[i], desc + RX_REG_OFFSET_DESC2 + RX_DESC2_ADDRESS_VIRT); } - writel(RX_DESC1_END, desc + RX_REG_OFFSET_DESC1); + moxart_desc_write(RX_DESC1_END, desc + RX_REG_OFFSET_DESC1); priv->rx_head = 0; @@ -201,14 +211,15 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget) napi); struct net_device *ndev = priv->ndev; struct sk_buff *skb; - void __iomem *desc; + void *desc; unsigned int desc0, len; int rx_head = priv->rx_head; int rx = 0; while (rx < budget) { desc = priv->rx_desc_base + (RX_REG_DESC_SIZE * rx_head); - desc0 = readl(desc + RX_REG_OFFSET_DESC0); + desc0 = moxart_desc_read(desc + RX_REG_OFFSET_DESC0); + rmb(); /* ensure desc0 is up to date */ if (desc0 & RX_DESC0_DMA_OWN) break; @@ -250,7 +261,8 @@ static int moxart_rx_poll(struct napi_struct *napi, int budget) priv->stats.multicast++; rx_next: - writel(RX_DESC0_DMA_OWN, desc + RX_REG_OFFSET_DESC0); + wmb(); /* prevent setting ownership back too early */ + moxart_desc_write(RX_DESC0_DMA_OWN, desc + RX_REG_OFFSET_DESC0); rx_head = RX_NEXT(rx_head); priv->rx_head = rx_head; @@ -310,7 +322,7 @@ static irqreturn_t moxart_mac_interrupt(int irq, void *dev_id) static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { struct moxart_mac_priv_t *priv = netdev_priv(ndev); - void __iomem *desc; + void *desc; unsigned int len; unsigned int tx_head = priv->tx_head; u32 txdes1; @@ -319,11 +331,12 @@ static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) desc = priv->tx_desc_base + (TX_REG_DESC_SIZE * tx_head); spin_lock_irq(&priv->txlock); - if (readl(desc + TX_REG_OFFSET_DESC0) & TX_DESC0_DMA_OWN) { + if (moxart_desc_read(desc + TX_REG_OFFSET_DESC0) & TX_DESC0_DMA_OWN) { net_dbg_ratelimited("no TX space for packet\n"); priv->stats.tx_dropped++; goto out_unlock; } + rmb(); /* ensure data is only read that had TX_DESC0_DMA_OWN cleared */ len = skb->len > TX_BUF_SIZE ? TX_BUF_SIZE : skb->len; @@ -337,9 +350,9 @@ static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) priv->tx_len[tx_head] = len; priv->tx_skb[tx_head] = skb; - writel(priv->tx_mapping[tx_head], + moxart_desc_write(priv->tx_mapping[tx_head], desc + TX_REG_OFFSET_DESC2 + TX_DESC2_ADDRESS_PHYS); - writel(skb->data, + moxart_desc_write((uintptr_t)skb->data, desc + TX_REG_OFFSET_DESC2 + TX_DESC2_ADDRESS_VIRT); if (skb->len < ETH_ZLEN) { @@ -354,8 +367,9 @@ static int moxart_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) txdes1 = TX_DESC1_LTS | TX_DESC1_FTS | (len & TX_DESC1_BUF_SIZE_MASK); if (tx_head == TX_DESC_NUM_MASK) txdes1 |= TX_DESC1_END; - writel(txdes1, desc + TX_REG_OFFSET_DESC1); - writel(TX_DESC0_DMA_OWN, desc + TX_REG_OFFSET_DESC0); + moxart_desc_write(txdes1, desc + TX_REG_OFFSET_DESC1); + wmb(); /* flush descriptor before transferring ownership */ + moxart_desc_write(TX_DESC0_DMA_OWN, desc + TX_REG_OFFSET_DESC0); /* start to send packet */ writel(0xffffffff, priv->base + REG_TX_POLL_DEMAND); diff --git a/drivers/net/ethernet/moxa/moxart_ether.h b/drivers/net/ethernet/moxa/moxart_ether.h index 2be9280d608c..93a9563ac7c6 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.h +++ b/drivers/net/ethernet/moxa/moxart_ether.h @@ -300,7 +300,7 @@ struct moxart_mac_priv_t { dma_addr_t rx_base; dma_addr_t rx_mapping[RX_DESC_NUM]; - void __iomem *rx_desc_base; + void *rx_desc_base; unsigned char *rx_buf_base; unsigned char *rx_buf[RX_DESC_NUM]; unsigned int rx_head; @@ -308,7 +308,7 @@ struct moxart_mac_priv_t { dma_addr_t tx_base; dma_addr_t tx_mapping[TX_DESC_NUM]; - void __iomem *tx_desc_base; + void *tx_desc_base; unsigned char *tx_buf_base; unsigned char *tx_buf[RX_DESC_NUM]; unsigned int tx_head; -- cgit v1.2.3 From be1faa92e83b1252d9200c59d8c98aab44463f1e Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Thu, 28 Jan 2016 16:54:37 -0500 Subject: net: dsa: mv88e6xxx: fix port VLAN maps Currently the port based VLAN maps should be configured to allow every port to egress frames on all other ports, except themselves. The debugfs interface shows that they are misconfigured. For instance, a 7-port switch has the following content in the related register 0x06: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7f 7e 7d 7c 7b 7a 79 ... This means that port 3 is allowed to talk to port 2-6, but cannot talk to ports 0 and 1. With this fix, port 3 can correctly talk to all ports except 3 itself: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7e 7d 7b 77 6f 5f 3f ... Fixes: ede8098d0fef ("net: dsa: mv88e6xxx: bridges do not need an FID") Reported-by: Kevin Smith Signed-off-by: Vivien Didelot Reviewed-by: Andrew Lunn Tested-by: Kevin Smith Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 9cc73bf0a081..cf34681af4f6 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2163,7 +2163,8 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) * database, and allow every port to egress frames on all other ports. */ reg = BIT(ps->num_ports) - 1; /* all ports */ - ret = _mv88e6xxx_port_vlan_map_set(ds, port, reg & ~port); + reg &= ~BIT(port); /* except itself */ + ret = _mv88e6xxx_port_vlan_map_set(ds, port, reg); if (ret) goto abort; -- cgit v1.2.3 From 7256eac13b0e6884355cf40f75db05785d18f5da Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 29 Jan 2016 09:43:47 +0800 Subject: vxlan: fix a out of bounds access in __vxlan_find_mac The size of all_zeros_mac is 6 byte, but eth_hash() will access the 8 byte, and KASan reported the below bug: [ 8596.479031] BUG: KASan: out of bounds access in __vxlan_find_mac+0x24/0x100 at addr ffffffff841514c0 [ 8596.487647] Read of size 8 by task ip/52820 [ 8596.490818] Address belongs to variable all_zeros_mac+0x0/0x40 [ 8596.496051] CPU: 0 PID: 52820 Comm: ip Tainted: G WC 4.1.15 #1 [ 8596.503520] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014 [ 8596.509365] ffffffff841514c0 ffff88007450f0b8 ffffffff822fa5e1 0000000000000032 [ 8596.516112] ffff88007450f150 ffff88007450f138 ffffffff812dd58c ffff88007450f1d8 [ 8596.522856] ffffffff81113b80 0000000000000282 0000000000000001 ffffffff8101ee4d [ 8596.529599] Call Trace: [ 8596.530858] [] dump_stack+0x4f/0x7b [ 8596.535080] [] kasan_report_error+0x3bc/0x3f0 [ 8596.540258] [] ? __lock_acquire+0x90/0x2140 [ 8596.545245] [] ? save_stack_trace+0x2d/0x80 [ 8596.550234] [] kasan_report+0x40/0x50 [ 8596.554647] [] ? __vxlan_find_mac+0x24/0x100 [ 8596.559729] [] __asan_load8+0x69/0xa0 [ 8596.564141] [] __vxlan_find_mac+0x24/0x100 [ 8596.569033] [] vxlan_fdb_create+0x9d/0x570 it can be fixed by enlarging the all_zeros_mac to 8 byte, although it is harmless; eth_hash() will be called in other place with the memory which is larger and equal to 8 byte. Signed-off-by: Li RongQing Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index a85b1fcb3130..65439188c582 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -73,7 +73,7 @@ MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN"); static int vxlan_net_id; static struct rtnl_link_ops vxlan_link_ops; -static const u8 all_zeros_mac[ETH_ALEN]; +static const u8 all_zeros_mac[ETH_ALEN + 2]; static int vxlan_sock_add(struct vxlan_dev *vxlan); -- cgit v1.2.3 From 84092996673211f16ef3b942a191d7952e9dfea9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:10 +0100 Subject: net: davinci_cpdma: use dma_addr_t for DMA address The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch: ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create': ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, In file included from ethernet/ti/davinci_cpdma.c:21:0: dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}' static inline void *dma_alloc_coherent(struct device *dev, size_t size, This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used. We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index 657b65bf5cac..18bf3a8fdc50 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -82,7 +82,7 @@ struct cpdma_desc { struct cpdma_desc_pool { phys_addr_t phys; - u32 hw_addr; + dma_addr_t hw_addr; void __iomem *iomap; /* ioremap map */ void *cpumap; /* dma_alloc map */ int desc_size, mem_size; @@ -152,7 +152,7 @@ struct cpdma_chan { * abstract out these details */ static struct cpdma_desc_pool * -cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr, +cpdma_desc_pool_create(struct device *dev, u32 phys, dma_addr_t hw_addr, int size, int align) { int bitmap_size; @@ -176,13 +176,13 @@ cpdma_desc_pool_create(struct device *dev, u32 phys, u32 hw_addr, if (phys) { pool->phys = phys; - pool->iomap = ioremap(phys, size); + pool->iomap = ioremap(phys, size); /* should be memremap? */ pool->hw_addr = hw_addr; } else { - pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, + pool->cpumap = dma_alloc_coherent(dev, size, &pool->hw_addr, GFP_KERNEL); - pool->iomap = pool->cpumap; - pool->hw_addr = pool->phys; + pool->iomap = (void __iomem __force *)pool->cpumap; + pool->phys = pool->hw_addr; /* assumes no IOMMU, don't use this value */ } if (pool->iomap) -- cgit v1.2.3 From 747a11279a442b913a57bf38934879babab3b58b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:11 +0100 Subject: net: hp100: remove unnecessary #ifdefs Building the hp100 ethernet driver causes warnings when both the PCI and EISA drivers are disabled: ethernet/hp/hp100.c: In function 'hp100_module_init': ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label] ethernet/hp/hp100.c: At top level: ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function] We can easily avoid the warnings and make the driver look slightly nicer by removing the #ifdefs that check for the CONFIG_PCI and CONFIG_EISA, as all the registration functions are designed to have no effect when the buses are disabled. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/hp/hp100.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index 1d5c3e16d8f4..3daf2d4a7ca0 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -194,7 +194,6 @@ static const char *hp100_isa_tbl[] = { }; #endif -#ifdef CONFIG_EISA static struct eisa_device_id hp100_eisa_tbl[] = { { "HWPF180" }, /* HP J2577 rev A */ { "HWP1920" }, /* HP 27248B */ @@ -205,9 +204,7 @@ static struct eisa_device_id hp100_eisa_tbl[] = { { "" } /* Mandatory final entry ! */ }; MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl); -#endif -#ifdef CONFIG_PCI static const struct pci_device_id hp100_pci_tbl[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,}, @@ -219,7 +216,6 @@ static const struct pci_device_id hp100_pci_tbl[] = { {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, hp100_pci_tbl); -#endif static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO; static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX; @@ -2842,7 +2838,6 @@ static void cleanup_dev(struct net_device *d) free_netdev(d); } -#ifdef CONFIG_EISA static int hp100_eisa_probe(struct device *gendev) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); @@ -2884,9 +2879,7 @@ static struct eisa_driver hp100_eisa_driver = { .remove = hp100_eisa_remove, } }; -#endif -#ifdef CONFIG_PCI static int hp100_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2955,7 +2948,6 @@ static struct pci_driver hp100_pci_driver = { .probe = hp100_pci_probe, .remove = hp100_pci_remove, }; -#endif /* * module section @@ -3032,23 +3024,17 @@ static int __init hp100_module_init(void) err = hp100_isa_init(); if (err && err != -ENODEV) goto out; -#ifdef CONFIG_EISA err = eisa_driver_register(&hp100_eisa_driver); if (err && err != -ENODEV) goto out2; -#endif -#ifdef CONFIG_PCI err = pci_register_driver(&hp100_pci_driver); if (err && err != -ENODEV) goto out3; -#endif out: return err; out3: -#ifdef CONFIG_EISA eisa_driver_unregister (&hp100_eisa_driver); out2: -#endif hp100_isa_cleanup(); goto out; } @@ -3057,12 +3043,8 @@ static int __init hp100_module_init(void) static void __exit hp100_module_exit(void) { hp100_isa_cleanup(); -#ifdef CONFIG_EISA eisa_driver_unregister (&hp100_eisa_driver); -#endif -#ifdef CONFIG_PCI pci_unregister_driver (&hp100_pci_driver); -#endif } module_init(hp100_module_init) -- cgit v1.2.3 From 1f820f538f7396db7fd40684b9c3620816acc5a3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:12 +0100 Subject: net: bgmac: clarify CONFIG_BCMA dependency The bgmac driver depends on BCMA_HOST_SOC, which is only used when CONFIG_BCMA is enabled. However, it is a bool option and can be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading to an obvious link error: drivers/built-in.o: In function `bgmac_init': :(.init.text+0x7f2c): undefined reference to `__bcma_driver_register' drivers/built-in.o: In function `bgmac_exit': :(.exit.text+0x110a): undefined reference to `bcma_driver_unregister' To avoid this case, we need to depend on both BCMA and BCMA_SOC, as this patch does. I'm also trying to make the dependency more readable by splitting it into three lines, and adding a COMPILE_TEST alternative so we can test-build it in all configurations that support BCMA. The added dependency on FIXED_PHY addresses a related issue where we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and CONFIG_BGMAC=y. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 8550df189ceb..19f7cd02e085 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -151,8 +151,11 @@ config BNX2X_VXLAN config BGMAC tristate "BCMA bus GBit core support" - depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X) + depends on BCMA && BCMA_HOST_SOC + depends on HAS_DMA + depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST select PHYLIB + select FIXED_PHY ---help--- This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. They can be found on BCM47xx SoCs and provide gigabit ethernet. -- cgit v1.2.3 From 57e7c8cef224af166b8ec932b5e383641418c005 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:13 +0100 Subject: net: vxge: avoid unused function warnings When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/neterion/vxge/vxge-main.c | 31 ++++++++++---------------- 1 file changed, 12 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 50d5604833ed..e0993eba5df3 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -2223,8 +2223,6 @@ static irqreturn_t vxge_isr_napi(int irq, void *dev_id) return IRQ_NONE; } -#ifdef CONFIG_PCI_MSI - static irqreturn_t vxge_tx_msix_handle(int irq, void *dev_id) { struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id; @@ -2442,16 +2440,13 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev) if (vdev->config.intr_type == MSI_X) pci_disable_msix(vdev->pdev); } -#endif static void vxge_rem_isr(struct vxgedev *vdev) { -#ifdef CONFIG_PCI_MSI - if (vdev->config.intr_type == MSI_X) { + if (IS_ENABLED(CONFIG_PCI_MSI) && + vdev->config.intr_type == MSI_X) { vxge_rem_msix_isr(vdev); - } else -#endif - if (vdev->config.intr_type == INTA) { + } else if (vdev->config.intr_type == INTA) { synchronize_irq(vdev->pdev->irq); free_irq(vdev->pdev->irq, vdev); } @@ -2460,11 +2455,10 @@ static void vxge_rem_isr(struct vxgedev *vdev) static int vxge_add_isr(struct vxgedev *vdev) { int ret = 0; -#ifdef CONFIG_PCI_MSI int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0; int pci_fun = PCI_FUNC(vdev->pdev->devfn); - if (vdev->config.intr_type == MSI_X) + if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X) ret = vxge_enable_msix(vdev); if (ret) { @@ -2475,7 +2469,7 @@ static int vxge_add_isr(struct vxgedev *vdev) vdev->config.intr_type = INTA; } - if (vdev->config.intr_type == MSI_X) { + if (IS_ENABLED(CONFIG_PCI_MSI) && vdev->config.intr_type == MSI_X) { for (intr_idx = 0; intr_idx < (vdev->no_of_vpath * VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) { @@ -2576,9 +2570,8 @@ static int vxge_add_isr(struct vxgedev *vdev) vdev->vxge_entries[intr_cnt].in_use = 1; vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0]; } -INTA_MODE: -#endif +INTA_MODE: if (vdev->config.intr_type == INTA) { snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge:INTA", vdev->ndev->name); @@ -3889,12 +3882,12 @@ static void vxge_device_config_init(struct vxge_hw_device_config *device_config, if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT) max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT; -#ifndef CONFIG_PCI_MSI - vxge_debug_init(VXGE_ERR, - "%s: This Kernel does not support " - "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); - *intr_type = INTA; -#endif + if (!IS_ENABLED(CONFIG_PCI_MSI)) { + vxge_debug_init(VXGE_ERR, + "%s: This Kernel does not support " + "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME); + *intr_type = INTA; + } /* Configure whether MSI-X or IRQL. */ switch (*intr_type) { -- cgit v1.2.3 From 8bdb290896d2ff22942c9c9f5bf19909329f3664 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:14 +0100 Subject: net: nb8800: avoid uninitialized variable warning The nb8800_poll() function initializes the 'next' variable in the loop looking for new input data. We know this will be called at least once because 'budget' is a guaranteed to be a positive number when we enter the function, but the compiler doesn't know that and warns when the variable is used later: drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll': drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized] Changing the 'while() {}' loop to 'do {} while()' makes it obvious to the compiler what is going on so it no longer warns. Signed-off-by: Arnd Bergmann Acked-by: Mans Rullgard Signed-off-by: David S. Miller --- drivers/net/ethernet/aurora/nb8800.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c index ecc4a334c507..f71ab2647a3b 100644 --- a/drivers/net/ethernet/aurora/nb8800.c +++ b/drivers/net/ethernet/aurora/nb8800.c @@ -302,7 +302,7 @@ static int nb8800_poll(struct napi_struct *napi, int budget) nb8800_tx_done(dev); again: - while (work < budget) { + do { struct nb8800_rx_buf *rxb; unsigned int len; @@ -330,7 +330,7 @@ again: rxd->report = 0; last = next; work++; - } + } while (work < budget); if (work) { priv->rx_descs[last].desc.config |= DESC_EOC; -- cgit v1.2.3 From e434e04110704eb91acfecbd0fb8ca8e2da9c29b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Jan 2016 12:39:15 +0100 Subject: net: tg3: avoid uninitialized variable warning The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 9293675df7ba..49eea8981332 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -12016,7 +12016,7 @@ static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, int ret; u32 offset, len, b_offset, odd_len; u8 *buf; - __be32 start, end; + __be32 start = 0, end; if (tg3_flag(tp, NO_NVRAM) || eeprom->magic != TG3_EEPROM_MAGIC) -- cgit v1.2.3