From 3095794ae972bc6fc76af6cb3b864d6686b96094 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 18 Feb 2015 13:50:17 +0200 Subject: ACPI / LPSS: Deassert resets for SPI host controllers on Braswell On some Braswell systems BIOS leaves resets for SPI host controllers active. This prevents the SPI driver from transferring messages on wire. Fix this in similar way that we do for I2C already by deasserting resets for the SPI host controllers. Reported-by: Yang A Fang Signed-off-by: Mika Westerberg Cc: 3.17+ # 3.17+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_lpss.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index cb84efe7fc5d..6bb8d3574ec6 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -105,9 +105,7 @@ static void lpss_uart_setup(struct lpss_private_data *pdata) } } -#define LPSS_I2C_ENABLE 0x6c - -static void byt_i2c_setup(struct lpss_private_data *pdata) +static void lpss_deassert_reset(struct lpss_private_data *pdata) { unsigned int offset; u32 val; @@ -116,6 +114,13 @@ static void byt_i2c_setup(struct lpss_private_data *pdata) val = readl(pdata->mmio_base + offset); val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC; writel(val, pdata->mmio_base + offset); +} + +#define LPSS_I2C_ENABLE 0x6c + +static void byt_i2c_setup(struct lpss_private_data *pdata) +{ + lpss_deassert_reset(pdata); if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset)) pdata->fixed_clk_rate = 133000000; @@ -170,6 +175,12 @@ static struct lpss_device_desc byt_i2c_dev_desc = { .setup = byt_i2c_setup, }; +static struct lpss_device_desc bsw_spi_dev_desc = { + .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, + .prv_offset = 0x400, + .setup = lpss_deassert_reset, +}; + #else #define LPSS_ADDR(desc) (0UL) @@ -202,7 +213,7 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = { /* Braswell LPSS devices */ { "80862288", LPSS_ADDR(byt_pwm_dev_desc) }, { "8086228A", LPSS_ADDR(byt_uart_dev_desc) }, - { "8086228E", LPSS_ADDR(byt_spi_dev_desc) }, + { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) }, { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) }, { "INT3430", LPSS_ADDR(lpt_dev_desc) }, -- cgit v1.2.3