From 9aa1cfca255bf3ba83f44b3452d34cc34607b94a Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 27 Feb 2015 17:18:21 -0600 Subject: remoteproc/ste: add blank lines after declarations Fix couple of checkpatch warnings of the type, "WARNING: Missing a blank line after declarations" Signed-off-by: Suman Anna Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/ste_modem_rproc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c index dd193f35a1ff..53dc17bdd54e 100644 --- a/drivers/remoteproc/ste_modem_rproc.c +++ b/drivers/remoteproc/ste_modem_rproc.c @@ -67,8 +67,7 @@ static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw) static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data) { int i; - const struct ste_toc *toc; - toc = data; + const struct ste_toc *toc = data; /* Search the table for the resource table */ for (i = 0; i < SPROC_MAX_TOC_ENTRIES && @@ -230,6 +229,7 @@ static int sproc_start(struct rproc *rproc) static int sproc_stop(struct rproc *rproc) { struct sproc *sproc = rproc->priv; + sproc_dbg(sproc, "stop ste-modem\n"); return sproc->mdev->ops.power(sproc->mdev, false); -- cgit v1.2.3 From e17aee37a68b3884114f515df3ee506870f5eea1 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 27 Feb 2015 17:18:22 -0600 Subject: remoteproc/davinci: fix quoted split string checkpatch warning Fix the following checkpatch warning, WARNING: quoted string split across lines + "\n\t\tName of DSP firmware file in /lib/firmware" + " (if not specified defaults to 'rproc-dsp-fw')"); Signed-off-by: Suman Anna [remove leading whitespace as well] Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/da8xx_remoteproc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c index f8d6a0661c14..009e56f67de2 100644 --- a/drivers/remoteproc/da8xx_remoteproc.c +++ b/drivers/remoteproc/da8xx_remoteproc.c @@ -26,8 +26,7 @@ static char *da8xx_fw_name; module_param(da8xx_fw_name, charp, S_IRUGO); MODULE_PARM_DESC(da8xx_fw_name, - "\n\t\tName of DSP firmware file in /lib/firmware" - " (if not specified defaults to 'rproc-dsp-fw')"); + "Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')"); /* * OMAP-L138 Technical References: -- cgit v1.2.3 From 172e6ab1caffcd2dd2910b44d88d096f2c6985fa Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 27 Feb 2015 17:18:23 -0600 Subject: remoteproc: fix various checkpatch warnings Fix all the checkpatch warnings in the core remoteproc code. The fixes cover the following warnings: 1. WARNING: void function return statements are not generally useful 2. WARNING: Possible unnecessary 'out of memory' message 3. WARNING: line over 80 characters 4. WARNING: braces {} are not necessary for single statement blocks 5. WARNING: Unnecessary space before function pointer arguments Signed-off-by: Suman Anna Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_core.c | 27 +++++++++------------------ drivers/remoteproc/remoteproc_internal.h | 2 +- 2 files changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 11cdb119e4f3..e991512e04ed 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -132,8 +132,6 @@ static void rproc_disable_iommu(struct rproc *rproc) iommu_detach_device(domain, dev); iommu_domain_free(domain); - - return; } /* @@ -411,10 +409,8 @@ static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc, } trace = kzalloc(sizeof(*trace), GFP_KERNEL); - if (!trace) { - dev_err(dev, "kzalloc trace failed\n"); + if (!trace) return -ENOMEM; - } /* set the trace buffer dma properties */ trace->len = rsc->len; @@ -489,10 +485,8 @@ static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc, } mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); - if (!mapping) { - dev_err(dev, "kzalloc mapping failed\n"); + if (!mapping) return -ENOMEM; - } ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags); if (ret) { @@ -565,10 +559,8 @@ static int rproc_handle_carveout(struct rproc *rproc, rsc->da, rsc->pa, rsc->len, rsc->flags); carveout = kzalloc(sizeof(*carveout), GFP_KERNEL); - if (!carveout) { - dev_err(dev, "kzalloc carveout failed\n"); + if (!carveout) return -ENOMEM; - } va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL); if (!va) { @@ -768,7 +760,8 @@ static void rproc_resource_cleanup(struct rproc *rproc) /* clean up carveout allocations */ list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) { - dma_free_coherent(dev->parent, entry->len, entry->va, entry->dma); + dma_free_coherent(dev->parent, entry->len, entry->va, + entry->dma); list_del(&entry->node); kfree(entry); } @@ -808,9 +801,8 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) /* look for the resource table */ table = rproc_find_rsc_table(rproc, fw, &tablesz); - if (!table) { + if (!table) goto clean_up; - } /* Verify that resource table in loaded fw is unchanged */ if (rproc->table_csum != crc32(0, table, tablesz)) { @@ -911,7 +903,8 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context) /* count the number of notify-ids */ rproc->max_notifyid = -1; - ret = rproc_handle_resources(rproc, tablesz, rproc_count_vrings_handler); + ret = rproc_handle_resources(rproc, tablesz, + rproc_count_vrings_handler); if (ret) goto out; @@ -1268,10 +1261,8 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, name_len = strlen(name) + strlen(template) - 2 + 1; rproc = kzalloc(sizeof(struct rproc) + len + name_len, GFP_KERNEL); - if (!rproc) { - dev_err(dev, "%s: kzalloc failed\n", __func__); + if (!rproc) return NULL; - } if (!firmware) { p = (char *)rproc + sizeof(struct rproc) + len; diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 70701a50ddfa..8041b95cb058 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -35,7 +35,7 @@ struct rproc; * @get_boot_addr: get boot address to entry point specified in firmware */ struct rproc_fw_ops { - struct resource_table *(*find_rsc_table) (struct rproc *rproc, + struct resource_table *(*find_rsc_table)(struct rproc *rproc, const struct firmware *fw, int *tablesz); struct resource_table *(*find_loaded_rsc_table)(struct rproc *rproc, -- cgit v1.2.3 From fec47d863587c272d6fbf4e50066209c953d5e60 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Fri, 22 May 2015 15:45:27 -0500 Subject: remoteproc: introduce rproc_get_by_phandle API Allow users of remoteproc the ability to get a handle to an rproc by passing a phandle supplied in the user's device tree node. This is useful in situations that require manual booting of the rproc. This patch uses the code removed by commit 40e575b1d0b3 ("remoteproc: remove the get_by_name/put API") for the ref counting but is modified to use a simple list and locking mechanism and has rproc_get_by_name replaced with an rproc_get_by_phandle API. Signed-off-by: Dave Gerlach Signed-off-by: Suman Anna [fix order of Signed-off-by tags] Signed-off-by: Ohad Ben-Cohen --- Documentation/remoteproc.txt | 6 +++++ drivers/remoteproc/remoteproc_core.c | 50 ++++++++++++++++++++++++++++++++++++ include/linux/remoteproc.h | 7 ++--- 3 files changed, 60 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt index e6469fdcf89a..ef0219fa4bb4 100644 --- a/Documentation/remoteproc.txt +++ b/Documentation/remoteproc.txt @@ -51,6 +51,12 @@ cost. rproc_shutdown() returns, and users can still use it with a subsequent rproc_boot(), if needed. + struct rproc *rproc_get_by_phandle(phandle phandle) + - Find an rproc handle using a device tree phandle. Returns the rproc + handle on success, and NULL on failure. This function increments + the remote processor's refcount, so always use rproc_put() to + decrement it back once rproc isn't needed anymore. + 3. Typical usage #include diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index e991512e04ed..e1a6d693b8bb 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -44,6 +44,9 @@ #include "remoteproc_internal.h" +static DEFINE_MUTEX(rproc_list_mutex); +static LIST_HEAD(rproc_list); + typedef int (*rproc_handle_resources_t)(struct rproc *rproc, struct resource_table *table, int len); typedef int (*rproc_handle_resource_t)(struct rproc *rproc, @@ -1144,6 +1147,43 @@ out: } EXPORT_SYMBOL(rproc_shutdown); +/** + * rproc_get_by_phandle() - find a remote processor by phandle + * @phandle: phandle to the rproc + * + * Finds an rproc handle using the remote processor's phandle, and then + * return a handle to the rproc. + * + * This function increments the remote processor's refcount, so always + * use rproc_put() to decrement it back once rproc isn't needed anymore. + * + * Returns the rproc handle on success, and NULL on failure. + */ +struct rproc *rproc_get_by_phandle(phandle phandle) +{ + struct rproc *rproc = NULL, *r; + struct device_node *np; + + np = of_find_node_by_phandle(phandle); + if (!np) + return NULL; + + mutex_lock(&rproc_list_mutex); + list_for_each_entry(r, &rproc_list, node) { + if (r->dev.parent && r->dev.parent->of_node == np) { + rproc = r; + get_device(&rproc->dev); + break; + } + } + mutex_unlock(&rproc_list_mutex); + + of_node_put(np); + + return rproc; +} +EXPORT_SYMBOL(rproc_get_by_phandle); + /** * rproc_add() - register a remote processor * @rproc: the remote processor handle to register @@ -1173,6 +1213,11 @@ int rproc_add(struct rproc *rproc) if (ret < 0) return ret; + /* expose to rproc_get_by_phandle users */ + mutex_lock(&rproc_list_mutex); + list_add(&rproc->node, &rproc_list); + mutex_unlock(&rproc_list_mutex); + dev_info(dev, "%s is available\n", rproc->name); dev_info(dev, "Note: remoteproc is still under development and considered experimental.\n"); @@ -1360,6 +1405,11 @@ int rproc_del(struct rproc *rproc) /* Free the copy of the resource table */ kfree(rproc->cached_table); + /* the rproc is downref'ed as soon as it's removed from the klist */ + mutex_lock(&rproc_list_mutex); + list_del(&rproc->node); + mutex_unlock(&rproc_list_mutex); + device_del(&rproc->dev); return 0; diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 78b8a9b9d40a..56739e5df1e6 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -36,11 +36,11 @@ #define REMOTEPROC_H #include -#include #include #include #include #include +#include /** * struct resource_table - firmware resource table header @@ -375,7 +375,7 @@ enum rproc_crash_type { /** * struct rproc - represents a physical remote processor device - * @node: klist node of this rproc object + * @node: list node of this rproc object * @domain: iommu domain * @name: human readable name of the rproc * @firmware: name of firmware file to be loaded @@ -407,7 +407,7 @@ enum rproc_crash_type { * @has_iommu: flag to indicate if remote processor is behind an MMU */ struct rproc { - struct klist_node node; + struct list_head node; struct iommu_domain *domain; const char *name; const char *firmware; @@ -481,6 +481,7 @@ struct rproc_vdev { u32 rsc_offset; }; +struct rproc *rproc_get_by_phandle(phandle phandle); struct rproc *rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, const char *firmware, int len); -- cgit v1.2.3 From a01f7cd657c95941079d548ef7fbf0cc370c1259 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 22 May 2015 15:45:28 -0500 Subject: remoteproc: add a rproc ops for performing address translation The rproc_da_to_va API is currently used to perform any device to kernel address translations to meet the different needs of the remoteproc core/drivers (eg: loading). The functionality is achieved within the remoteproc core, and is limited only for carveouts allocated within the core. A new rproc ops, da_to_va, is added to provide flexibility to platform implementations to perform the address translation themselves when the above conditions cannot be met by the implementations. The rproc_da_to_va() API is extended to invoke this ops if present, and fallback to regular processing if the platform implementation cannot provide the translation. This will allow any remoteproc implementations to translate addresses for dedicated memories like internal memories. While at this, also update the rproc_da_to_va() documentation since it is an exported function. Signed-off-by: Suman Anna Signed-off-by: Dave Gerlach Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_core.c | 31 +++++++++++++++++++++++++------ include/linux/remoteproc.h | 2 ++ 2 files changed, 27 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index e1a6d693b8bb..b4ab38015cf2 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -137,28 +137,46 @@ static void rproc_disable_iommu(struct rproc *rproc) iommu_domain_free(domain); } -/* +/** + * rproc_da_to_va() - lookup the kernel virtual address for a remoteproc address + * @rproc: handle of a remote processor + * @da: remoteproc device address to translate + * @len: length of the memory region @da is pointing to + * * Some remote processors will ask us to allocate them physically contiguous * memory regions (which we call "carveouts"), and map them to specific - * device addresses (which are hardcoded in the firmware). + * device addresses (which are hardcoded in the firmware). They may also have + * dedicated memory regions internal to the processors, and use them either + * exclusively or alongside carveouts. * * They may then ask us to copy objects into specific device addresses (e.g. * code/data sections) or expose us certain symbols in other device address * (e.g. their trace buffer). * - * This function is an internal helper with which we can go over the allocated - * carveouts and translate specific device address to kernel virtual addresses - * so we can access the referenced memory. + * This function is a helper function with which we can go over the allocated + * carveouts and translate specific device addresses to kernel virtual addresses + * so we can access the referenced memory. This function also allows to perform + * translations on the internal remoteproc memory regions through a platform + * implementation specific da_to_va ops, if present. + * + * The function returns a valid kernel address on success or NULL on failure. * * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, * but only on kernel direct mapped RAM memory. Instead, we're just using - * here the output of the DMA API, which should be more correct. + * here the output of the DMA API for the carveouts, which should be more + * correct. */ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) { struct rproc_mem_entry *carveout; void *ptr = NULL; + if (rproc->ops->da_to_va) { + ptr = rproc->ops->da_to_va(rproc, da, len); + if (ptr) + goto out; + } + list_for_each_entry(carveout, &rproc->carveouts, node) { int offset = da - carveout->da; @@ -175,6 +193,7 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) break; } +out: return ptr; } EXPORT_SYMBOL(rproc_da_to_va); diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 56739e5df1e6..9c4e1384f636 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -330,11 +330,13 @@ struct rproc; * @start: power on the device and boot it * @stop: power off the device * @kick: kick a virtqueue (virtqueue id given as a parameter) + * @da_to_va: optional platform hook to perform address translations */ struct rproc_ops { int (*start)(struct rproc *rproc); int (*stop)(struct rproc *rproc); void (*kick)(struct rproc *rproc, int vqid); + void * (*da_to_va)(struct rproc *rproc, u64 da, int len); }; /** -- cgit v1.2.3 From a01bc0d5f557bd8becd0ba75d09c39192004697e Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Fri, 22 May 2015 15:45:30 -0500 Subject: remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 Add a remoteproc driver to load the firmware and boot a small Wakeup M3 processor present on TI AM33xx and AM43xx SoCs. This Wakeup M3 remote processor is an integrated Cortex M3 that allows the SoC to enter the lowest possible power state by taking control from the MPU after it has gone into its own low power state and shutting off any additional peripherals. The Wakeup M3 processor has two internal memory regions - 16 kB of unified instruction memory called UMEM used to store executable code, and 8 kB of data memory called DMEM used for all data sections. The Wakeup M3 processor executes its code entirely from within the UMEM and uses the DMEM for any data. It does not use any external memory or any other external resources. The device address view has the UMEM at address 0x0 and DMEM at address 0x80000, and these are computed automatically within the driver based on relative address calculation from the corresponding device tree IOMEM resources. These device addresses are used to aid the core remoteproc ELF loader code to properly translate and load the firmware segments through the .rproc_da_to_va ops. Signed-off-by: Dave Gerlach Signed-off-by: Suman Anna Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/Kconfig | 13 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/wkup_m3_rproc.c | 257 ++++++++++++++++++++++++++++++++++ include/linux/platform_data/wkup_m3.h | 30 ++++ 4 files changed, 301 insertions(+) create mode 100644 drivers/remoteproc/wkup_m3_rproc.c create mode 100644 include/linux/platform_data/wkup_m3.h (limited to 'drivers') diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 5e343bab9458..28c711f0ac6b 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -41,6 +41,19 @@ config STE_MODEM_RPROC This can be either built-in or a loadable module. If unsure say N. +config WKUP_M3_RPROC + tristate "AMx3xx Wakeup M3 remoteproc support" + depends on SOC_AM33XX || SOC_AM43XX + select REMOTEPROC + help + Say y here to support Wakeup M3 remote processor on TI AM33xx + and AM43xx family of SoCs. + + Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed + for deep CPUIdle states on AM33xx SoCs. Allows for loading of the + firmware onto these remote processors. + If unsure say N. + config DA8XX_REMOTEPROC tristate "DA8xx/OMAP-L13x remoteproc support" depends on ARCH_DAVINCI_DA8XX diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index ac2ff75686d2..81b04d1e2e58 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -9,4 +9,5 @@ remoteproc-y += remoteproc_virtio.o remoteproc-y += remoteproc_elf_loader.o obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o +obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c new file mode 100644 index 000000000000..edf81819cce1 --- /dev/null +++ b/drivers/remoteproc/wkup_m3_rproc.c @@ -0,0 +1,257 @@ +/* + * TI AMx3 Wakeup M3 Remote Processor driver + * + * Copyright (C) 2014-2015 Texas Instruments, Inc. + * + * Dave Gerlach + * Suman Anna + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "remoteproc_internal.h" + +#define WKUPM3_MEM_MAX 2 + +/** + * struct wkup_m3_mem - WkupM3 internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address from Wakeup M3 view + * @size: Size of the memory region + */ +struct wkup_m3_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +/** + * struct wkup_m3_rproc - WkupM3 remote processor state + * @rproc: rproc handle + * @pdev: pointer to platform device + * @mem: WkupM3 memory information + */ +struct wkup_m3_rproc { + struct rproc *rproc; + struct platform_device *pdev; + struct wkup_m3_mem mem[WKUPM3_MEM_MAX]; +}; + +static int wkup_m3_rproc_start(struct rproc *rproc) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + struct platform_device *pdev = wkupm3->pdev; + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->deassert_reset(pdev, pdata->reset_name)) { + dev_err(dev, "Unable to reset wkup_m3!\n"); + return -ENODEV; + } + + return 0; +} + +static int wkup_m3_rproc_stop(struct rproc *rproc) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + struct platform_device *pdev = wkupm3->pdev; + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->assert_reset(pdev, pdata->reset_name)) { + dev_err(dev, "Unable to assert reset of wkup_m3!\n"); + return -ENODEV; + } + + return 0; +} + +static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct wkup_m3_rproc *wkupm3 = rproc->priv; + void *va = NULL; + int i; + u32 offset; + + if (len <= 0) + return NULL; + + for (i = 0; i < WKUPM3_MEM_MAX; i++) { + if (da >= wkupm3->mem[i].dev_addr && da + len <= + wkupm3->mem[i].dev_addr + wkupm3->mem[i].size) { + offset = da - wkupm3->mem[i].dev_addr; + /* __force to make sparse happy with type conversion */ + va = (__force void *)(wkupm3->mem[i].cpu_addr + offset); + break; + } + } + + return va; +} + +static struct rproc_ops wkup_m3_rproc_ops = { + .start = wkup_m3_rproc_start, + .stop = wkup_m3_rproc_stop, + .da_to_va = wkup_m3_rproc_da_to_va, +}; + +static const struct of_device_id wkup_m3_rproc_of_match[] = { + { .compatible = "ti,am3352-wkup-m3", }, + { .compatible = "ti,am4372-wkup-m3", }, + {}, +}; + +static int wkup_m3_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct wkup_m3_platform_data *pdata = dev->platform_data; + /* umem always needs to be processed first */ + const char *mem_names[WKUPM3_MEM_MAX] = { "umem", "dmem" }; + struct wkup_m3_rproc *wkupm3; + const char *fw_name; + struct rproc *rproc; + struct resource *res; + const __be32 *addrp; + u32 l4_offset = 0; + u64 size; + int ret; + int i; + + if (!(pdata && pdata->deassert_reset && pdata->assert_reset && + pdata->reset_name)) { + dev_err(dev, "Platform data missing!\n"); + return -ENODEV; + } + + ret = of_property_read_string(dev->of_node, "ti,pm-firmware", + &fw_name); + if (ret) { + dev_err(dev, "No firmware filename given\n"); + return -ENODEV; + } + + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + goto err; + } + + rproc = rproc_alloc(dev, "wkup_m3", &wkup_m3_rproc_ops, + fw_name, sizeof(*wkupm3)); + if (!rproc) { + ret = -ENOMEM; + goto err; + } + + wkupm3 = rproc->priv; + wkupm3->rproc = rproc; + wkupm3->pdev = pdev; + + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + wkupm3->mem[i].cpu_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(wkupm3->mem[i].cpu_addr)) { + dev_err(&pdev->dev, "devm_ioremap_resource failed for resource %d\n", + i); + ret = PTR_ERR(wkupm3->mem[i].cpu_addr); + goto err; + } + wkupm3->mem[i].bus_addr = res->start; + wkupm3->mem[i].size = resource_size(res); + addrp = of_get_address(dev->of_node, i, &size, NULL); + /* + * The wkupm3 has umem at address 0 in its view, so the device + * addresses for each memory region is computed as a relative + * offset of the bus address for umem, and therefore needs to be + * processed first. + */ + if (!strcmp(mem_names[i], "umem")) + l4_offset = be32_to_cpu(*addrp); + wkupm3->mem[i].dev_addr = be32_to_cpu(*addrp) - l4_offset; + } + + dev_set_drvdata(dev, rproc); + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "rproc_add failed\n"); + goto err_put_rproc; + } + + return 0; + +err_put_rproc: + rproc_put(rproc); +err: + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; +} + +static int wkup_m3_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + + rproc_del(rproc); + rproc_put(rproc); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int wkup_m3_rpm_suspend(struct device *dev) +{ + return -EBUSY; +} + +static int wkup_m3_rpm_resume(struct device *dev) +{ + return 0; +} +#endif + +static const struct dev_pm_ops wkup_m3_rproc_pm_ops = { + SET_RUNTIME_PM_OPS(wkup_m3_rpm_suspend, wkup_m3_rpm_resume, NULL) +}; + +static struct platform_driver wkup_m3_rproc_driver = { + .probe = wkup_m3_rproc_probe, + .remove = wkup_m3_rproc_remove, + .driver = { + .name = "wkup_m3_rproc", + .of_match_table = wkup_m3_rproc_of_match, + .pm = &wkup_m3_rproc_pm_ops, + }, +}; + +module_platform_driver(wkup_m3_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI Wakeup M3 remote processor control driver"); +MODULE_AUTHOR("Dave Gerlach "); diff --git a/include/linux/platform_data/wkup_m3.h b/include/linux/platform_data/wkup_m3.h new file mode 100644 index 000000000000..3f1d77effd71 --- /dev/null +++ b/include/linux/platform_data/wkup_m3.h @@ -0,0 +1,30 @@ +/* + * TI Wakeup M3 remote processor platform data + * + * Copyright (C) 2014-2015 Texas Instruments, Inc. + * + * Dave Gerlach + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_PLATFORM_DATA_WKUP_M3_H +#define _LINUX_PLATFORM_DATA_WKUP_M3_H + +struct platform_device; + +struct wkup_m3_platform_data { + const char *reset_name; + + int (*assert_reset)(struct platform_device *pdev, const char *name); + int (*deassert_reset)(struct platform_device *pdev, const char *name); +}; + +#endif /* _LINUX_PLATFORM_DATA_WKUP_M3_H */ -- cgit v1.2.3 From 8de3dbd0895bebe52d069a82feae8e3fb51c1bdf Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 18 Jun 2015 11:44:41 +0300 Subject: remoteproc: fix !CONFIG_OF build breakage Fix this: drivers/remoteproc/remoteproc_core.c: In function 'rproc_get_by_phandle': >> drivers/remoteproc/remoteproc_core.c:1167:2: error: implicit declaration of function 'of_find_node_by_phandle' [-Werror=implicit-function-declaration] np = of_find_node_by_phandle(phandle); Reported-by: kbuild test robot Cc: Dave Gerlach Cc: Suman Anna Signed-off-by: Ohad Ben-Cohen --- drivers/remoteproc/remoteproc_core.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index b4ab38015cf2..8b3130f22b42 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1178,6 +1178,7 @@ EXPORT_SYMBOL(rproc_shutdown); * * Returns the rproc handle on success, and NULL on failure. */ +#ifdef CONFIG_OF struct rproc *rproc_get_by_phandle(phandle phandle) { struct rproc *rproc = NULL, *r; @@ -1201,6 +1202,12 @@ struct rproc *rproc_get_by_phandle(phandle phandle) return rproc; } +#else +struct rproc *rproc_get_by_phandle(phandle phandle) +{ + return NULL; +} +#endif EXPORT_SYMBOL(rproc_get_by_phandle); /** -- cgit v1.2.3