From ae023b2795d36f0f077e157428eb7eafa29ee412 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 21 Jan 2013 13:12:57 +0200 Subject: Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue" This reverts commit f590dcec944552f9a4a61155810f3abd17d6465d which has been reported to cause issues. See https://lkml.org/lkml/2013/1/20/4 for further details. Cc: stable@vger.kernel.org [3.7] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 31534f7c0548..279796419ea0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1153,6 +1153,13 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, next_reclaimed = ssn; } + if (tid != IWL_TID_NON_QOS) { + priv->tid_data[sta_id][tid].next_reclaimed = + next_reclaimed; + IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", + next_reclaimed); + } + iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs); iwlagn_check_ratid_empty(priv, sta_id, tid); @@ -1203,28 +1210,11 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, if (!is_agg) iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1); - /* - * W/A for FW bug - the seq_ctl isn't updated when the - * queues are flushed. Fetch it from the packet itself - */ - if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) { - next_reclaimed = le16_to_cpu(hdr->seq_ctrl); - next_reclaimed = - SEQ_TO_SN(next_reclaimed + 0x10); - } - is_offchannel_skb = (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN); freed++; } - if (tid != IWL_TID_NON_QOS) { - priv->tid_data[sta_id][tid].next_reclaimed = - next_reclaimed; - IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", - next_reclaimed); - } - WARN_ON(!is_agg && freed != 1); /* -- cgit v1.2.3 From 0e33e48ddc4402e890aaeeeacc95f730bf522098 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 22 Jan 2013 22:47:40 +0100 Subject: brcmsmac: fix tx status processing This issue was reported on the wireless list (see [1]) in which brcmsmac ran into a fatal error: [ 588.284074] brcmsmac bcma0:0: frameid != txh->TxFrameID [ 588.284098] brcmsmac bcma0:0: MI_TFS: fatal [ 588.284103] brcmsmac bcma0:0: wl0: fatal error, reinitializing [ 588.286208] ieee80211 phy0: Hardware restart was requested The tx status feedback is processed in a loop limiting the number of frames processed in one run. The code terminate processing when the limit is reached regardless the txstatus value read from the device register. When that status is is flagged as being valid it must be processed as the hardware will clear it after is has been read. Bisecting was done by Seth Forshee and showed following commit as the culprit: commit 57fe504817ccec9b6ac23e973d2925343bf1e3b6 Author: Piotr Haber Date: Wed Nov 28 21:44:07 2012 +0100 brcmsmac: fix bounds checking in tx/rx [1] http://www.spinics.net/lists/linux-wireless/msg101293.html Reported-by: Linus Torvalds Tested-by: Seth Forshee Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 17594de4199e..9f3d7e9f3bb5 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -1027,7 +1027,6 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) static bool brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) { - bool morepending = false; struct bcma_device *core; struct tx_status txstatus, *txs; u32 s1, s2; @@ -1041,23 +1040,20 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) txs = &txstatus; core = wlc_hw->d11core; *fatal = false; - s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); - while (!(*fatal) - && (s1 & TXS_V)) { - /* !give others some time to run! */ - if (n >= max_tx_num) { - morepending = true; - break; - } + while (n < max_tx_num) { + s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); if (s1 == 0xffffffff) { brcms_err(core, "wl%d: %s: dead chip\n", wlc_hw->unit, __func__); *fatal = true; return false; } - s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2)); + /* only process when valid */ + if (!(s1 & TXS_V)) + break; + s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2)); txs->status = s1 & TXS_STATUS_MASK; txs->frameid = (s1 & TXS_FID_MASK) >> TXS_FID_SHIFT; txs->sequence = s2 & TXS_SEQ_MASK; @@ -1065,15 +1061,12 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) txs->lasttxtime = 0; *fatal = brcms_c_dotxstatus(wlc_hw->wlc, txs); - - s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); + if (*fatal == true) + return false; n++; } - if (*fatal) - return false; - - return morepending; + return n >= max_tx_num; } static void brcms_c_tbtt(struct brcms_c_info *wlc) -- cgit v1.2.3 From 6b112decb777884e37d308554e22e0a4f5cdf44f Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 27 Jan 2013 14:30:29 +0100 Subject: bcma: fix NAND flash validation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/driver_chipcommon_nflash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index dbda91e4dff5..1f0b83e18f68 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -21,7 +21,7 @@ int bcma_nflash_init(struct bcma_drv_cc *cc) struct bcma_bus *bus = cc->core->bus; if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && - cc->core->id.rev != 0x38) { + cc->core->id.rev != 38) { bcma_err(bus, "NAND flash on unsupported board!\n"); return -ENOTSUPP; } -- cgit v1.2.3 From 0a06ad8e3a1cb5311b7dbafde45410aa1bce9d40 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 27 Jan 2013 16:24:25 -0600 Subject: rtlwifi: Fix the usage of the wrong variable in usb.c In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb; however, the wrong variable name is used in subsequent calls. Reported-by: Guenter Roeck Signed-off-by: Larry Finger Cc: Guenter Roeck Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f2ecdeb3a90d..1535efda3d52 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -542,8 +542,8 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb) WARN_ON(skb_queue_empty(&rx_queue)); while (!skb_queue_empty(&rx_queue)) { _skb = skb_dequeue(&rx_queue); - _rtl_usb_rx_process_agg(hw, skb); - ieee80211_rx_irqsafe(hw, skb); + _rtl_usb_rx_process_agg(hw, _skb); + ieee80211_rx_irqsafe(hw, _skb); } } -- cgit v1.2.3 From af668b3c276d0f958a3aa46ef8ec47e2d5d333b3 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 28 Jan 2013 00:38:02 +0000 Subject: tun: fix carrier on/off status MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c8d68e6be1c3b242f1c598595830890b65cea64a removed carrier off call from tun_detach since it's now called on queue disable and not only on tun close. This confuses userspace which used this flag to detect a free tun. To fix, put this back but under if (clean). Signed-off-by: Michael S. Tsirkin Tested-by: Jason Wang Acked-by: Jason Wang Tested-by: Toralf Förster Signed-off-by: David S. Miller --- drivers/net/tun.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index cc09b67c23bc..ffdb84474c47 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -439,10 +439,13 @@ static void __tun_detach(struct tun_file *tfile, bool clean) } if (clean) { - if (tun && tun->numqueues == 0 && tun->numdisabled == 0 && - !(tun->flags & TUN_PERSIST)) - if (tun->dev->reg_state == NETREG_REGISTERED) + if (tun && tun->numqueues == 0 && tun->numdisabled == 0) { + netif_carrier_off(tun->dev); + + if (!(tun->flags & TUN_PERSIST) && + tun->dev->reg_state == NETREG_REGISTERED) unregister_netdevice(tun->dev); + } BUG_ON(!test_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags)); @@ -1658,10 +1661,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) device_create_file(&tun->dev->dev, &dev_attr_owner) || device_create_file(&tun->dev->dev, &dev_attr_group)) pr_err("Failed to create tun sysfs files\n"); - - netif_carrier_on(tun->dev); } + netif_carrier_on(tun->dev); + tun_debug(KERN_INFO, tun, "tun_set_iff\n"); if (ifr->ifr_flags & IFF_NO_PI) -- cgit v1.2.3 From 692a998b908ae4c612d95d1f5f5adae03eca2b79 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 28 Jan 2013 01:05:17 +0000 Subject: vhost_net: correct error handling in vhost_net_set_backend() Currently, when vhost_init_used() fails the sock refcnt and ubufs were leaked. Correct this by calling vhost_init_used() before assign ubufs and restore the oldsock when it fails. Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/vhost/net.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index ebd08b21b234..d10ad6f8df7e 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -827,15 +827,16 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd) r = PTR_ERR(ubufs); goto err_ubufs; } - oldubufs = vq->ubufs; - vq->ubufs = ubufs; + vhost_net_disable_vq(n, vq); rcu_assign_pointer(vq->private_data, sock); - vhost_net_enable_vq(n, vq); - r = vhost_init_used(vq); if (r) - goto err_vq; + goto err_used; + vhost_net_enable_vq(n, vq); + + oldubufs = vq->ubufs; + vq->ubufs = ubufs; n->tx_packets = 0; n->tx_zcopy_err = 0; @@ -859,6 +860,11 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd) mutex_unlock(&n->dev.mutex); return 0; +err_used: + rcu_assign_pointer(vq->private_data, oldsock); + vhost_net_enable_vq(n, vq); + if (ubufs) + vhost_ubuf_put_and_wait(ubufs); err_ubufs: fput(sock->file); err_vq: -- cgit v1.2.3 From 2b8b328b61c799957a456a5a8dab8cc7dea68575 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 28 Jan 2013 01:05:18 +0000 Subject: vhost_net: handle polling errors when setting backend Currently, the polling errors were ignored, which can lead following issues: - vhost remove itself unconditionally from waitqueue when stopping the poll, this may crash the kernel since the previous attempt of starting may fail to add itself to the waitqueue - userspace may think the backend were successfully set even when the polling failed. Solve this by: - check poll->wqh before trying to remove from waitqueue - report polling errors in vhost_poll_start(), tx_poll_start(), the return value will be checked and returned when userspace want to set the backend After this fix, there still could be a polling failure after backend is set, it will addressed by the next patch. Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/vhost/net.c | 27 ++++++++++++++++++--------- drivers/vhost/vhost.c | 18 +++++++++++++++--- drivers/vhost/vhost.h | 2 +- 3 files changed, 34 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index d10ad6f8df7e..959b1cd89e6a 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -165,12 +165,16 @@ static void tx_poll_stop(struct vhost_net *net) } /* Caller must have TX VQ lock */ -static void tx_poll_start(struct vhost_net *net, struct socket *sock) +static int tx_poll_start(struct vhost_net *net, struct socket *sock) { + int ret; + if (unlikely(net->tx_poll_state != VHOST_NET_POLL_STOPPED)) - return; - vhost_poll_start(net->poll + VHOST_NET_VQ_TX, sock->file); - net->tx_poll_state = VHOST_NET_POLL_STARTED; + return 0; + ret = vhost_poll_start(net->poll + VHOST_NET_VQ_TX, sock->file); + if (!ret) + net->tx_poll_state = VHOST_NET_POLL_STARTED; + return ret; } /* In case of DMA done not in order in lower device driver for some reason. @@ -642,20 +646,23 @@ static void vhost_net_disable_vq(struct vhost_net *n, vhost_poll_stop(n->poll + VHOST_NET_VQ_RX); } -static void vhost_net_enable_vq(struct vhost_net *n, +static int vhost_net_enable_vq(struct vhost_net *n, struct vhost_virtqueue *vq) { struct socket *sock; + int ret; sock = rcu_dereference_protected(vq->private_data, lockdep_is_held(&vq->mutex)); if (!sock) - return; + return 0; if (vq == n->vqs + VHOST_NET_VQ_TX) { n->tx_poll_state = VHOST_NET_POLL_STOPPED; - tx_poll_start(n, sock); + ret = tx_poll_start(n, sock); } else - vhost_poll_start(n->poll + VHOST_NET_VQ_RX, sock->file); + ret = vhost_poll_start(n->poll + VHOST_NET_VQ_RX, sock->file); + + return ret; } static struct socket *vhost_net_stop_vq(struct vhost_net *n, @@ -833,7 +840,9 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd) r = vhost_init_used(vq); if (r) goto err_used; - vhost_net_enable_vq(n, vq); + r = vhost_net_enable_vq(n, vq); + if (r) + goto err_used; oldubufs = vq->ubufs; vq->ubufs = ubufs; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 34389f75fe65..9759249e6d90 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -77,26 +77,38 @@ void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn, init_poll_funcptr(&poll->table, vhost_poll_func); poll->mask = mask; poll->dev = dev; + poll->wqh = NULL; vhost_work_init(&poll->work, fn); } /* Start polling a file. We add ourselves to file's wait queue. The caller must * keep a reference to a file until after vhost_poll_stop is called. */ -void vhost_poll_start(struct vhost_poll *poll, struct file *file) +int vhost_poll_start(struct vhost_poll *poll, struct file *file) { unsigned long mask; + int ret = 0; mask = file->f_op->poll(file, &poll->table); if (mask) vhost_poll_wakeup(&poll->wait, 0, 0, (void *)mask); + if (mask & POLLERR) { + if (poll->wqh) + remove_wait_queue(poll->wqh, &poll->wait); + ret = -EINVAL; + } + + return ret; } /* Stop polling a file. After this function returns, it becomes safe to drop the * file reference. You must also flush afterwards. */ void vhost_poll_stop(struct vhost_poll *poll) { - remove_wait_queue(poll->wqh, &poll->wait); + if (poll->wqh) { + remove_wait_queue(poll->wqh, &poll->wait); + poll->wqh = NULL; + } } static bool vhost_work_seq_done(struct vhost_dev *dev, struct vhost_work *work, @@ -792,7 +804,7 @@ long vhost_vring_ioctl(struct vhost_dev *d, int ioctl, void __user *argp) fput(filep); if (pollstart && vq->handle_kick) - vhost_poll_start(&vq->poll, vq->kick); + r = vhost_poll_start(&vq->poll, vq->kick); mutex_unlock(&vq->mutex); diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 2639c58b23ab..17261e277c02 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -42,7 +42,7 @@ void vhost_work_queue(struct vhost_dev *dev, struct vhost_work *work); void vhost_poll_init(struct vhost_poll *poll, vhost_work_fn_t fn, unsigned long mask, struct vhost_dev *dev); -void vhost_poll_start(struct vhost_poll *poll, struct file *file); +int vhost_poll_start(struct vhost_poll *poll, struct file *file); void vhost_poll_stop(struct vhost_poll *poll); void vhost_poll_flush(struct vhost_poll *poll); void vhost_poll_queue(struct vhost_poll *poll); -- cgit v1.2.3 From 9e85722d58ca9d49d718929184492a1180bced3c Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 28 Jan 2013 01:05:19 +0000 Subject: tuntap: allow polling/writing/reading when detached We forbid polling, writing and reading when the file were detached, this may complex the user in several cases: - when guest pass some buffers to vhost/qemu and then disable some queues, host/qemu needs to do its own cleanup on those buffers which is complex sometimes. We can do this simply by allowing a user can still write to an disabled queue. Write to an disabled queue will cause the packet pass to the kernel and read will get nothing. - align the polling behavior with macvtap which never fails when the queue is created. This can simplify the polling errors handling of its user (e.g vhost) We can simply achieve this by don't assign NULL to tfile->tun when detached. Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index ffdb84474c47..2917a86f4c43 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -298,11 +298,12 @@ static void tun_flow_cleanup(unsigned long data) } static void tun_flow_update(struct tun_struct *tun, u32 rxhash, - u16 queue_index) + struct tun_file *tfile) { struct hlist_head *head; struct tun_flow_entry *e; unsigned long delay = tun->ageing_time; + u16 queue_index = tfile->queue_index; if (!rxhash) return; @@ -311,7 +312,9 @@ static void tun_flow_update(struct tun_struct *tun, u32 rxhash, rcu_read_lock(); - if (tun->numqueues == 1) + /* We may get a very small possibility of OOO during switching, not + * worth to optimize.*/ + if (tun->numqueues == 1 || tfile->detached) goto unlock; e = tun_flow_find(head, rxhash); @@ -411,21 +414,21 @@ static void __tun_detach(struct tun_file *tfile, bool clean) tun = rtnl_dereference(tfile->tun); - if (tun) { + if (tun && !tfile->detached) { u16 index = tfile->queue_index; BUG_ON(index >= tun->numqueues); dev = tun->dev; rcu_assign_pointer(tun->tfiles[index], tun->tfiles[tun->numqueues - 1]); - rcu_assign_pointer(tfile->tun, NULL); ntfile = rtnl_dereference(tun->tfiles[index]); ntfile->queue_index = index; --tun->numqueues; - if (clean) + if (clean) { + rcu_assign_pointer(tfile->tun, NULL); sock_put(&tfile->sk); - else + } else tun_disable_queue(tun, tfile); synchronize_net(); @@ -473,6 +476,10 @@ static void tun_detach_all(struct net_device *dev) rcu_assign_pointer(tfile->tun, NULL); --tun->numqueues; } + list_for_each_entry(tfile, &tun->disabled, next) { + wake_up_all(&tfile->wq.wait); + rcu_assign_pointer(tfile->tun, NULL); + } BUG_ON(tun->numqueues != 0); synchronize_net(); @@ -503,7 +510,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file) goto out; err = -EINVAL; - if (rtnl_dereference(tfile->tun)) + if (rtnl_dereference(tfile->tun) && !tfile->detached) goto out; err = -EBUSY; @@ -1202,7 +1209,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, tun->dev->stats.rx_packets++; tun->dev->stats.rx_bytes += len; - tun_flow_update(tun, rxhash, tfile->queue_index); + tun_flow_update(tun, rxhash, tfile); return total_len; } @@ -1816,7 +1823,7 @@ static int tun_set_queue(struct file *file, struct ifreq *ifr) ret = tun_attach(tun, file); } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { tun = rtnl_dereference(tfile->tun); - if (!tun || !(tun->flags & TUN_TAP_MQ)) + if (!tun || !(tun->flags & TUN_TAP_MQ) || tfile->detached) ret = -EINVAL; else __tun_detach(tfile, false); -- cgit v1.2.3 From 00d3d51e9d8c983e237236a41863d138b7f77ff6 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Mon, 28 Jan 2013 04:17:01 +0000 Subject: be2net: Updating Module Author string and log message string to "Emulex Corporation" Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 8 ++++---- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 4eba17b83ba8..f1b3df167ff2 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -36,13 +36,13 @@ #define DRV_VER "4.4.161.0u" #define DRV_NAME "be2net" -#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" -#define BE3_NAME "ServerEngines BladeEngine3 10Gbps NIC" -#define OC_NAME "Emulex OneConnect 10Gbps NIC" +#define BE_NAME "Emulex BladeEngine2" +#define BE3_NAME "Emulex BladeEngine3" +#define OC_NAME "Emulex OneConnect" #define OC_NAME_BE OC_NAME "(be3)" #define OC_NAME_LANCER OC_NAME "(Lancer)" #define OC_NAME_SH OC_NAME "(Skyhawk)" -#define DRV_DESC "ServerEngines BladeEngine 10Gbps NIC Driver" +#define DRV_DESC "Emulex OneConnect 10Gbps NIC Driver" #define BE_VENDOR_ID 0x19a2 #define EMULEX_VENDOR_ID 0x10df diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 5c995700e534..4d6f3c54427a 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -25,7 +25,7 @@ MODULE_VERSION(DRV_VER); MODULE_DEVICE_TABLE(pci, be_dev_ids); MODULE_DESCRIPTION(DRV_DESC " " DRV_VER); -MODULE_AUTHOR("ServerEngines Corporation"); +MODULE_AUTHOR("Emulex Corporation"); MODULE_LICENSE("GPL"); static unsigned int num_vfs; -- cgit v1.2.3 From eb492f7443206711406a7c78cc12dee43e551f0c Mon Sep 17 00:00:00 2001 From: Milos Vyletel Date: Tue, 29 Jan 2013 09:59:00 +0000 Subject: bonding: unset primary slave via sysfs When bonding module is loaded with primary parameter and one decides to unset primary slave using sysfs these settings are not preserved during bond device restart. Primary slave is only unset once and it's not remembered in bond->params structure. Below is example of recreation. grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond0 BONDING_OPTS="mode=active-backup miimon=100 primary=eth01" grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: eth01 (primary_reselect always) echo "" > /sys/class/net/bond0/bonding/primary grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: None sed -i -e 's/primary=eth01//' /etc/sysconfig/network-scripts/ifcfg-bond0 grep OPTS /etc/sysconfig/network-scripts/ifcfg-bond BONDING_OPTS="mode=active-backup miimon=100 " ifdown bond0 && ifup bond0 without patch: grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: eth01 (primary_reselect always) with patch: grep "Primary Slave" /proc/net/bonding/bond0 Primary Slave: None Reviewed-by: Jiri Pirko Signed-off-by: Milos Vyletel Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 1877ed7ca086..1c9e09fbdff8 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1053,6 +1053,7 @@ static ssize_t bonding_store_primary(struct device *d, pr_info("%s: Setting primary slave to None.\n", bond->dev->name); bond->primary_slave = NULL; + memset(bond->params.primary, 0, sizeof(bond->params.primary)); bond_select_active_slave(bond); goto out; } -- cgit v1.2.3 From 286003048aaef49b26bb9d93611dc69085e8982e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 28 Jan 2013 00:43:48 +0000 Subject: e1000e: enable ECC on I217/I218 to catch packet buffer memory errors In rare instances, memory errors have been detected in the internal packet buffer memory on I217/I218 when stressed under certain environmental conditions. Enable Error Correcting Code (ECC) in hardware to catch both correctable and uncorrectable errors. Correctable errors will be handled by the hardware. Uncorrectable errors in the packet buffer will cause the packet to be received with an error indication in the buffer descriptor causing the packet to be discarded. If the uncorrectable error is in the descriptor itself, the hardware will stop and interrupt the driver indicating the error. The driver will then reset the hardware in order to clear the error and restart. Both types of errors will be accounted for in statistics counters. Signed-off-by: Bruce Allan Cc: # 3.5.x & 3.6.x Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/defines.h | 9 ++++++ drivers/net/ethernet/intel/e1000e/e1000.h | 2 ++ drivers/net/ethernet/intel/e1000e/ethtool.c | 2 ++ drivers/net/ethernet/intel/e1000e/hw.h | 1 + drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 +++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 46 +++++++++++++++++++++++++++++ 6 files changed, 71 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 02a12b69555f..4dab6fc265a2 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -232,6 +232,7 @@ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */ #define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */ +#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ @@ -389,6 +390,12 @@ #define E1000_PBS_16K E1000_PBA_16K +/* Uncorrectable/correctable ECC Error counts and enable bits */ +#define E1000_PBECCSTS_CORR_ERR_CNT_MASK 0x000000FF +#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK 0x0000FF00 +#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT 8 +#define E1000_PBECCSTS_ECC_ENABLE 0x00010000 + #define IFS_MAX 80 #define IFS_MIN 40 #define IFS_RATIO 4 @@ -408,6 +415,7 @@ #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ @@ -443,6 +451,7 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */ #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 6782a2eea1bc..7e95f221d60b 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -309,6 +309,8 @@ struct e1000_adapter { struct napi_struct napi; + unsigned int uncorr_errors; /* uncorrectable ECC errors */ + unsigned int corr_errors; /* correctable ECC errors */ unsigned int restart_queue; u32 txd_cmd; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index f95bc6ee1c22..fd4772a2691c 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -108,6 +108,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = { E1000_STAT("dropped_smbus", stats.mgpdc), E1000_STAT("rx_dma_failed", rx_dma_failed), E1000_STAT("tx_dma_failed", tx_dma_failed), + E1000_STAT("uncorr_ecc_errors", uncorr_errors), + E1000_STAT("corr_ecc_errors", corr_errors), }; #define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats) diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index cf217777586c..b88676ff3d86 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -77,6 +77,7 @@ enum e1e_registers { #define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */ E1000_PBS = 0x01008, /* Packet Buffer Size */ + E1000_PBECCSTS = 0x0100C, /* Packet Buffer ECC Status - RW */ E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */ E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */ E1000_FLOP = 0x0103C, /* FLASH Opcode Register */ diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 976336547607..24d9f61956f0 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -3624,6 +3624,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_ich8lan) reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); ew32(RFCTL, reg); + + /* Enable ECC on Lynxpoint */ + if (hw->mac.type == e1000_pch_lpt) { + reg = er32(PBECCSTS); + reg |= E1000_PBECCSTS_ECC_ENABLE; + ew32(PBECCSTS, reg); + + reg = er32(CTRL); + reg |= E1000_CTRL_MEHE; + ew32(CTRL, reg); + } } /** diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index fbf75fdca994..643c883dd795 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1678,6 +1678,23 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -1741,6 +1758,23 @@ static irqreturn_t e1000_intr(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } + /* Reset on uncorrectable ECC error */ + if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) { + u32 pbeccsts = er32(PBECCSTS); + + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); + + /* return immediately since reset is imminent */ + return IRQ_HANDLED; + } + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; @@ -2104,6 +2138,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + } else if (hw->mac.type == e1000_pch_lpt) { + ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { ew32(IMS, IMS_ENABLE_MASK); } @@ -4251,6 +4287,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); + + /* Correctable ECC Errors */ + if (hw->mac.type == e1000_pch_lpt) { + u32 pbeccsts = er32(PBECCSTS); + adapter->corr_errors += + pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK; + adapter->uncorr_errors += + (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >> + E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT; + } } /** -- cgit v1.2.3 From 6cdd20c380eb62eab757c5a6ccc90dac7ecd774b Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 29 Jan 2013 16:15:45 -0500 Subject: vmxnet3: set carrier state properly on probe vmxnet3 fails to set netif_carrier_off on probe, meaning that when an interface is opened the __LINK_STATE_NOCARRIER bit is already cleared, and so /sys/class/net//operstate remains in the unknown state. Correct this by setting netif_carrier_off on probe, like other drivers do. Also, while we're at it, lets remove the netif_carrier_ok checks from the link_state_update function, as that check is atomically contained within the netif_carrier_[on|off] functions anyway Tested successfully by myself Signed-off-by: Neil Horman CC: "David S. Miller" CC: "VMware, Inc." CC: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index dc8913c6238c..12c6440d1649 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -154,8 +154,7 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue) if (ret & 1) { /* Link is up. */ printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n", adapter->netdev->name, adapter->link_speed); - if (!netif_carrier_ok(adapter->netdev)) - netif_carrier_on(adapter->netdev); + netif_carrier_on(adapter->netdev); if (affectTxQueue) { for (i = 0; i < adapter->num_tx_queues; i++) @@ -165,8 +164,7 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue) } else { printk(KERN_INFO "%s: NIC Link is Down\n", adapter->netdev->name); - if (netif_carrier_ok(adapter->netdev)) - netif_carrier_off(adapter->netdev); + netif_carrier_off(adapter->netdev); if (affectTxQueue) { for (i = 0; i < adapter->num_tx_queues; i++) @@ -3061,6 +3059,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues); netif_set_real_num_rx_queues(adapter->netdev, adapter->num_rx_queues); + netif_carrier_off(netdev); err = register_netdev(netdev); if (err) { -- cgit v1.2.3 From 8a7d7cbf7b5ff9912ef50b3e94c9ad9f37b1c75f Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Tue, 29 Jan 2013 14:38:02 -0800 Subject: mwifiex: fix incomplete scan in case of IE parsing error A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Cc: "3.6+" Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/scan.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32b7844..973a9d90e9ea 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1563,7 +1563,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n", scan_rsp->number_of_sets); ret = -1; - goto done; + goto check_next_scan; } bytes_left = le16_to_cpu(scan_rsp->bss_descript_size); @@ -1634,7 +1634,8 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, if (!beacon_size || beacon_size > bytes_left) { bss_info += bytes_left; bytes_left = 0; - return -1; + ret = -1; + goto check_next_scan; } /* Initialize the current working beacon pointer for this BSS @@ -1690,7 +1691,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, dev_err(priv->adapter->dev, "%s: bytes left < IE length\n", __func__); - goto done; + goto check_next_scan; } if (element_id == WLAN_EID_DS_PARAMS) { channel = *(current_ptr + sizeof(struct ieee_types_header)); @@ -1753,6 +1754,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, } } +check_next_scan: spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); if (list_empty(&adapter->scan_pending_q)) { spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); @@ -1813,7 +1815,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, } } -done: return ret; } -- cgit v1.2.3 From 70c37bf97f2a91accba76080db69144f3b69f736 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 28 Jan 2013 23:51:28 +0000 Subject: net: usbnet: prevent buggy devices from killing us MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A device sending 0 length frames as fast as it can has been observed killing the host system due to the resulting memory pressure. Temporarily disable RX skb allocation and URB submission when the current error ratio is high, preventing us from trying to allocate an infinite number of skbs. Reenable as soon as we are finished processing the done queue, allowing the device to continue working after short error bursts. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 25 +++++++++++++++++++++++++ include/linux/usb/usbnet.h | 2 ++ 2 files changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f34b2ebee815..977837725726 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -380,6 +380,12 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) unsigned long lockflags; size_t size = dev->rx_urb_size; + /* prevent rx skb allocation when error ratio is high */ + if (test_bit(EVENT_RX_KILL, &dev->flags)) { + usb_free_urb(urb); + return -ENOLINK; + } + skb = __netdev_alloc_skb_ip_align(dev->net, size, flags); if (!skb) { netif_dbg(dev, rx_err, dev->net, "no rx skb\n"); @@ -539,6 +545,17 @@ block: break; } + /* stop rx if packet error rate is high */ + if (++dev->pkt_cnt > 30) { + dev->pkt_cnt = 0; + dev->pkt_err = 0; + } else { + if (state == rx_cleanup) + dev->pkt_err++; + if (dev->pkt_err > 20) + set_bit(EVENT_RX_KILL, &dev->flags); + } + state = defer_bh(dev, skb, &dev->rxq, state); if (urb) { @@ -791,6 +808,11 @@ int usbnet_open (struct net_device *net) (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" : "simple"); + /* reset rx error state */ + dev->pkt_cnt = 0; + dev->pkt_err = 0; + clear_bit(EVENT_RX_KILL, &dev->flags); + // delay posting reads until we're fully open tasklet_schedule (&dev->bh); if (info->manage_power) { @@ -1254,6 +1276,9 @@ static void usbnet_bh (unsigned long param) } } + /* restart RX again after disabling due to high error rate */ + clear_bit(EVENT_RX_KILL, &dev->flags); + // waiting for all pending urbs to complete? if (dev->wait) { if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) { diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 5de7a220e986..0de078d4cdb9 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -33,6 +33,7 @@ struct usbnet { wait_queue_head_t *wait; struct mutex phy_mutex; unsigned char suspend_count; + unsigned char pkt_cnt, pkt_err; /* i/o info: pipes etc */ unsigned in, out; @@ -70,6 +71,7 @@ struct usbnet { # define EVENT_DEV_OPEN 7 # define EVENT_DEVICE_REPORT_IDLE 8 # define EVENT_NO_RUNTIME_PM 9 +# define EVENT_RX_KILL 10 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) -- cgit v1.2.3 From 3d6d7ab5881b1d4431529410b949ba2e946f3b0f Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 30 Jan 2013 02:47:06 +0000 Subject: NET: qmi_wwan: add Telit LE920 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add VID, PID and fixed interface for Telit LE920 Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 575a5839ee34..2ca7f8ea2dca 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -461,6 +461,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ + {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.3 From 2bd3bc4e8472424f1a6009825397639a8968920a Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 13 Dec 2012 10:06:10 +0100 Subject: can: c_can: Set reserved bit in IFx_MASK2 to 1 on write According to C_CAN documentation, the reserved bit in IFx_MASK2 register is fixed 1. Cc: linux-stable Signed-off-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 58607f196c9e..2282b1ae9765 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -488,8 +488,12 @@ static void c_can_setup_receive_object(struct net_device *dev, int iface, priv->write_reg(priv, C_CAN_IFACE(MASK1_REG, iface), IFX_WRITE_LOW_16BIT(mask)); + + /* According to C_CAN documentation, the reserved bit + * in IFx_MASK2 register is fixed 1 + */ priv->write_reg(priv, C_CAN_IFACE(MASK2_REG, iface), - IFX_WRITE_HIGH_16BIT(mask)); + IFX_WRITE_HIGH_16BIT(mask) | BIT(13)); priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), IFX_WRITE_LOW_16BIT(id)); -- cgit v1.2.3 From 559bcac35facfed49ab4f408e162971612dcfdf3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 29 Jan 2013 22:58:04 -0500 Subject: via-rhine: Fix bugs in NAPI support. 1) rhine_tx() should use dev_kfree_skb() not dev_kfree_skb_irq() 2) rhine_slow_event_task's NAPI triggering logic is racey, it should just hit the interrupt mask register. This is the same as commit 7dbb491878a2c51d372a8890fa45a8ff80358af1 ("r8169: avoid NAPI scheduling delay.") made to fix the same problem in the r8169 driver. From Francois Romieu. Reported-by: Jamie Gloudon Tested-by: Jamie Gloudon Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-rhine.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index 7992b3e05d3d..78ace59efd29 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -1801,7 +1801,7 @@ static void rhine_tx(struct net_device *dev) rp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE); } - dev_kfree_skb_irq(rp->tx_skbuff[entry]); + dev_kfree_skb(rp->tx_skbuff[entry]); rp->tx_skbuff[entry] = NULL; entry = (++rp->dirty_tx) % TX_RING_SIZE; } @@ -2010,11 +2010,7 @@ static void rhine_slow_event_task(struct work_struct *work) if (intr_status & IntrPCIErr) netif_warn(rp, hw, dev, "PCI error\n"); - napi_disable(&rp->napi); - rhine_irq_disable(rp); - /* Slow and safe. Consider __napi_schedule as a replacement ? */ - napi_enable(&rp->napi); - napi_schedule(&rp->napi); + iowrite16(RHINE_EVENT & 0xffff, rp->base + IntrEnable); out_unlock: mutex_unlock(&rp->task_lock); -- cgit v1.2.3 From bf414b369f158bb527f9f29174ada815f961b44c Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 31 Jan 2013 08:36:05 +0000 Subject: net: usbnet: fix tx_dropped statistics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is normal for minidrivers accumulating frames to return NULL from their tx_fixup function. We do not want to count this as a drop, or log any debug messages. A different exit path is therefore chosen for such drivers, skipping the debug message and the tx_dropped increment. The test for accumulating drivers was however completely bogus, making the exit path selection depend on whether the user had enabled tx_err logging or not. This would arbitrarily mess up accounting for both accumulating and non-accumulating minidrivers, and would result in unwanted debug messages for the accumulating drivers. Fix by testing for FLAG_MULTI_PACKET instead, which probably was the intention from the beginning. This usage match the documented behaviour of this flag: Indicates to usbnet, that USB driver accumulates multiple IP packets. Affects statistic (counters) and short packet handling. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 977837725726..5e33606c1366 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1125,13 +1125,11 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (info->tx_fixup) { skb = info->tx_fixup (dev, skb, GFP_ATOMIC); if (!skb) { - if (netif_msg_tx_err(dev)) { - netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n"); - goto drop; - } else { - /* cdc_ncm collected packet; waits for more */ + /* packet collected; minidriver waiting for more */ + if (info->flags & FLAG_MULTI_PACKET) goto not_drop; - } + netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n"); + goto drop; } } length = skb->len; -- cgit v1.2.3