From 048feec5548c0582ee96148c61b87cccbcb5f9be Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 11 Sep 2008 22:19:45 -0700 Subject: [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes. Josip Rodin noted (http://article.gmane.org/gmane.linux.ports.sparc/10152) the driver oopsing during registration of an rport to the FC-transport layer with a backtrace indicating a dereferencing of an shost->shost_data equal to NULL. David Miller identified a small window in driver logic where this could happen: > Look at how the driver registers the IRQ handler before the host has > been registered with the SCSI layer. > > That leads to a window of time where the shost hasn't been setup > fully, yet ISRs can come in and trigger DPC thread events, such as > loop resyncs, which expect the transport area to be setup. > > But it won't be setup, because scsi_add_host() hasn't finished yet. > > Note that in Josip's crash log, we don't even see the > > qla_printk(KERN_INFO, ha, "\n" > " QLogic Fibre Channel HBA Driver: %s\n" > " QLogic %s - %s\n" > " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n", > ... > > message yet. > > Which means that the crash occurs between qla2x00_request_irqs() > and printing that message. Close this window by enabling RISC interrupts after the host has been registered with the SCSI midlayer. Reported-by: Josip Rodin Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 1 - drivers/scsi/qla2xxx/qla_os.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 45a3b93eed57..bf41887cdd65 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1834,7 +1834,6 @@ clear_risc_ints: WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); } spin_unlock_irq(&ha->hardware_lock); - ha->isp_ops->enable_intrs(ha); fail: return ret; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 26afe44265c7..6d0f0e5f2827 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1740,6 +1740,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) goto probe_failed; + ha->isp_ops->enable_intrs(ha); + scsi_scan_host(host); qla2x00_alloc_sysfs_attr(ha); -- cgit v1.2.3 From 44ea91c597ae4641d9ac21b8bbba0795d2f4261e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 20 Sep 2008 00:31:50 +0000 Subject: [SCSI] Fix hang with split requests Sometimes, particularly for USB devices with the last sector bug, requests get completed in chunks. There's a bug in this in that if one of the chunks gets an error, we complete that chunk with an error but never move on to the remaining ones, leading to the request hanging (because it's not fully completed). Fix this by completing all remaining chunks if an error is encountered. Cc: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ff5d56b3ee4d..62307bd794a9 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -852,7 +852,7 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = scsi_bufflen(cmd); + int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -908,6 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; + this_count = blk_rq_bytes(req); /* good_bytes = 0, or (inclusive) there were leftovers and * result = 0, so scsi_end_request couldn't retry. -- cgit v1.2.3 From c9eeb248f3b44939532a9716bc06413383aa5d63 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 24 Sep 2008 12:00:22 +0300 Subject: [SCSI] qlogicpti: fix sg list traversal error in continuation entries The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: Meelis Roos Cc: David Miller Signed-off-by: James Bottomley --- drivers/scsi/qlogicpti.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6c..905350896725 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; -- cgit v1.2.3