From f174442ed1afd6003a630a8ad230f629fddbf2ee Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 19 Aug 2014 16:34:49 +0300 Subject: serial: 8250_dw: Add ACPI ID for Intel Braswell Another new ACPI identifier for the 8250 dw bindings to cover newer Intel SoCs such as Braswell. Signed-off-by: Alan Cox Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 4db7987ec225..57d9df84ce5d 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -540,6 +540,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "INT3434", 0 }, { "INT3435", 0 }, { "80860F0A", 0 }, + { "8086228A", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); -- cgit v1.2.3 From 35b675b9100fc38f58cb75b30e422ecd342519a8 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Wed, 3 Sep 2014 18:09:26 +0200 Subject: tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS() In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was false. Tested on at91sam9g35. Signed-off-by: Richard Genoud Cc: stable # >= 3.16 Reviewed-by: Peter Hurley Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 7b63677475c1..d7d4584549a5 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -526,6 +526,45 @@ static void atmel_enable_ms(struct uart_port *port) UART_PUT_IER(port, ier); } +/* + * Disable modem status interrupts + */ +static void atmel_disable_ms(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + uint32_t idr = 0; + + /* + * Interrupt should not be disabled twice + */ + if (!atmel_port->ms_irq_enabled) + return; + + atmel_port->ms_irq_enabled = false; + + if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0) + disable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]); + else + idr |= ATMEL_US_CTSIC; + + if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0) + disable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]); + else + idr |= ATMEL_US_DSRIC; + + if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0) + disable_irq(atmel_port->gpio_irq[UART_GPIO_RI]); + else + idr |= ATMEL_US_RIIC; + + if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0) + disable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]); + else + idr |= ATMEL_US_DCDIC; + + UART_PUT_IDR(port, idr); +} + /* * Control the transmission of a break signal */ @@ -1993,7 +2032,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, /* CTS flow-control and modem-status interrupts */ if (UART_ENABLE_MS(port, termios->c_cflag)) - port->ops->enable_ms(port); + atmel_enable_ms(port); + else + atmel_disable_ms(port); spin_unlock_irqrestore(&port->lock, flags); } -- cgit v1.2.3 From 6731af573ac28de2297002992f38caa760e3dadf Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 5 Sep 2014 09:45:17 +0200 Subject: tty: xuartps: Fix tx_emtpy() callback The tx_empty() callback currently checks the TXEMPTY bit in the interrupt status register to decided whether the FIFO should be reported as empty or not. The bit in this register gets set when the FIFO state transitions from non-empty to empty but is cleared again in the interrupt handler. This means it is not suitable to be used to decided whether the FIFO is currently empty or not. Instead use the TXEMPTY bit from the status register which will be set as long as the FIFO is empty. Signed-off-by: Lars-Peter Clausen Acked-by: Soren Brinkmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 01951d27cc03..806e4bcadbd7 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -581,7 +581,7 @@ static unsigned int cdns_uart_tx_empty(struct uart_port *port) { unsigned int status; - status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY; + status = cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY; return status ? TIOCSER_TEMT : 0; } -- cgit v1.2.3