From 0f8132b7431e241c29e61ac14f22549a6fca9632 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 16 Mar 2011 13:11:17 +0000 Subject: viafb: move initialization code This moves some mode independend initialization code to the function where the other parts of the initialization are. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index dc4c778877ce..a982718f3998 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1162,6 +1162,8 @@ void via_odev_to_seq(struct seq_file *m, u32 odev) static void load_fix_bit_crtc_reg(void) { + viafb_unlock_crt(); + /* always set to 1 */ viafb_write_reg_mask(CR03, VIACR, 0x80, BIT7); /* line compare should set all bits = 1 (extend modes) */ @@ -1169,8 +1171,6 @@ static void load_fix_bit_crtc_reg(void) /* line compare should set all bits = 1 (extend modes) */ viafb_write_reg_mask(CR07, VIACR, 0x10, BIT4); /* line compare should set all bits = 1 (extend modes) */ - viafb_write_reg_mask(CR09, VIACR, 0x40, BIT6); - /* line compare should set all bits = 1 (extend modes) */ viafb_write_reg_mask(CR35, VIACR, 0x10, BIT4); /* line compare should set all bits = 1 (extend modes) */ viafb_write_reg_mask(CR33, VIACR, 0x06, BIT0 + BIT1 + BIT2); @@ -1181,6 +1181,10 @@ static void load_fix_bit_crtc_reg(void) viafb_write_reg(CR08, VIACR, 0x00); /* extend mode always set to 0h */ viafb_write_reg(CR14, VIACR, 0x00); + viafb_write_reg_mask(CR09, VIACR, 0x40, 0xDF); + viafb_write_reg_mask(CR11, VIACR, 0x00, BIT4 + BIT5 + BIT6); + + viafb_lock_crt(); /* If K8M800, enable Prefetch Mode. */ if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_K800) @@ -2033,8 +2037,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table, v_addr = crt_reg.ver_addr; if (set_iga == IGA1) { viafb_unlock_crt(); - viafb_write_reg(CR09, VIACR, 0x00); /*initial CR09=0 */ - viafb_write_reg_mask(CR11, VIACR, 0x00, BIT4 + BIT5 + BIT6); viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7); } @@ -2047,7 +2049,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table, break; } - load_fix_bit_crtc_reg(); viafb_lock_crt(); viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7); viafb_load_fetch_count_reg(h_addr, bpp_byte, set_iga); @@ -2432,6 +2433,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, } } + load_fix_bit_crtc_reg(); via_set_primary_pitch(viafbinfo->fix.line_length); via_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length : viafbinfo->fix.line_length); -- cgit v1.2.3 From 486d4c08dd2eb29b26b4a27f8056155a7a639861 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 16 Mar 2011 13:46:36 +0000 Subject: viafb: no need to write CRTC values twice Later the correct values will be written so there is no need to write early some values which might be wrong. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index a982718f3998..c4d2136ae338 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2401,9 +2401,6 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, viafb_write_reg_mask(0x15, VIASR, 0xA2, 0xA2); - /* Write CRTC */ - viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, IGA1); - /* Write Graphic Controller */ for (i = 0; i < StdGR; i++) via_write_reg(VIAGR, i, VPIT.GR[i]); -- cgit v1.2.3 From 0523656eed6941a1a0e6b8de36ca73f44d2142c0 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Mon, 21 Mar 2011 01:46:24 +0000 Subject: viafb: kill crt_setting_information As the iga path is the only remaining information which is also handled by the active devices there is no reason to keep it. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/chip.h | 4 ---- drivers/video/via/hw.c | 28 +++++++++++++--------------- drivers/video/via/viafbdev.c | 7 ++----- drivers/video/via/viafbdev.h | 2 -- 4 files changed, 15 insertions(+), 26 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h index 29d70244a21f..1aa0fb3c343e 100644 --- a/drivers/video/via/chip.h +++ b/drivers/video/via/chip.h @@ -137,10 +137,6 @@ struct chip_information { struct lvds_chip_information lvds_chip_info2; }; -struct crt_setting_information { - int iga_path; -}; - struct tmds_setting_information { int iga_path; int h_active; diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index c4d2136ae338..0098270ac425 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -770,13 +770,14 @@ static u32 get_lcd_devices(int output_interface) /*Set IGA path for each device*/ void viafb_set_iga_path(void) { + int crt_iga_path = 0; if (viafb_SAMM_ON == 1) { if (viafb_CRT_ON) { if (viafb_primary_dev == CRT_Device) - viaparinfo->crt_setting_info->iga_path = IGA1; + crt_iga_path = IGA1; else - viaparinfo->crt_setting_info->iga_path = IGA2; + crt_iga_path = IGA2; } if (viafb_DVI_ON) { @@ -793,8 +794,7 @@ void viafb_set_iga_path(void) UNICHROME_CLE266)) { viaparinfo-> lvds_setting_info->iga_path = IGA2; - viaparinfo-> - crt_setting_info->iga_path = IGA1; + crt_iga_path = IGA1; viaparinfo-> tmds_setting_info->iga_path = IGA1; } else @@ -814,10 +814,10 @@ void viafb_set_iga_path(void) viafb_SAMM_ON = 0; if (viafb_CRT_ON && viafb_LCD_ON) { - viaparinfo->crt_setting_info->iga_path = IGA1; + crt_iga_path = IGA1; viaparinfo->lvds_setting_info->iga_path = IGA2; } else if (viafb_CRT_ON && viafb_DVI_ON) { - viaparinfo->crt_setting_info->iga_path = IGA1; + crt_iga_path = IGA1; viaparinfo->tmds_setting_info->iga_path = IGA2; } else if (viafb_LCD_ON && viafb_DVI_ON) { viaparinfo->tmds_setting_info->iga_path = IGA1; @@ -826,7 +826,7 @@ void viafb_set_iga_path(void) viaparinfo->lvds_setting_info->iga_path = IGA2; viaparinfo->lvds_setting_info2->iga_path = IGA2; } else if (viafb_CRT_ON) { - viaparinfo->crt_setting_info->iga_path = IGA1; + crt_iga_path = IGA1; } else if (viafb_LCD_ON) { viaparinfo->lvds_setting_info->iga_path = IGA2; } else if (viafb_DVI_ON) { @@ -837,7 +837,7 @@ void viafb_set_iga_path(void) viaparinfo->shared->iga1_devices = 0; viaparinfo->shared->iga2_devices = 0; if (viafb_CRT_ON) { - if (viaparinfo->crt_setting_info->iga_path == IGA1) + if (crt_iga_path == IGA1) viaparinfo->shared->iga1_devices |= VIA_CRT; else viaparinfo->shared->iga2_devices |= VIA_CRT; @@ -2072,8 +2072,6 @@ void __devinit viafb_init_chip_info(int chip_type) init_tmds_chip_info(); init_lvds_chip_info(); - viaparinfo->crt_setting_info->iga_path = IGA1; - /*Set IGA path for each device */ viafb_set_iga_path(); @@ -2450,15 +2448,15 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, /* CRT set mode */ if (viafb_CRT_ON) { - if (viafb_SAMM_ON && (viaparinfo->crt_setting_info->iga_path == - IGA2)) { + if (viafb_SAMM_ON && + viaparinfo->shared->iga2_devices & VIA_CRT) { viafb_fill_crtc_timing(crt_timing1, vmode_tbl1, - video_bpp1 / 8, - viaparinfo->crt_setting_info->iga_path); + video_bpp1 / 8, IGA2); } else { viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, - viaparinfo->crt_setting_info->iga_path); + (viaparinfo->shared->iga1_devices & VIA_CRT) + ? IGA1 : IGA2); } /* Patch if set_hres is not 8 alignment (1366) to viafb_setmode diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 9d9bb9b4ed3f..ed9bd7978cc0 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -930,10 +930,8 @@ static int get_primary_device(void) /* Rule: device on iga1 path are the primary device. */ if (viafb_SAMM_ON) { if (viafb_CRT_ON) { - if (viaparinfo->crt_setting_info->iga_path == IGA1) { - DEBUG_MSG(KERN_INFO "CRT IGA Path:%d\n", - viaparinfo-> - crt_setting_info->iga_path); + if (viaparinfo->shared->iga1_devices & VIA_CRT) { + DEBUG_MSG(KERN_INFO "CRT IGA Path:%d\n", IGA1); primary_device = CRT_Device; } } @@ -1746,7 +1744,6 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev) viaparinfo->lvds_setting_info = &viaparinfo->shared->lvds_setting_info; viaparinfo->lvds_setting_info2 = &viaparinfo->shared->lvds_setting_info2; - viaparinfo->crt_setting_info = &viaparinfo->shared->crt_setting_info; viaparinfo->chip_info = &viaparinfo->shared->chip_info; if (viafb_dual_fb) diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h index d66f963e930e..ff60e1ddcffc 100644 --- a/drivers/video/via/viafbdev.h +++ b/drivers/video/via/viafbdev.h @@ -50,7 +50,6 @@ struct viafb_shared { /* All the information will be needed to set engine */ struct tmds_setting_information tmds_setting_info; - struct crt_setting_information crt_setting_info; struct lvds_setting_information lvds_setting_info; struct lvds_setting_information lvds_setting_info2; struct chip_information chip_info; @@ -79,7 +78,6 @@ struct viafb_par { /* All the information will be needed to set engine */ /* depreciated, use the ones in shared directly */ struct tmds_setting_information *tmds_setting_info; - struct crt_setting_information *crt_setting_info; struct lvds_setting_information *lvds_setting_info; struct lvds_setting_information *lvds_setting_info2; struct chip_information *chip_info; -- cgit v1.2.3 From eb0536c5e2815e3e38ed2b2f31401e114faec016 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Mon, 21 Mar 2011 13:28:26 +0000 Subject: viafb: allow some pll calculations This patch allows calculating the pll multiplier within limits based on the previous table. All available information supports that it should be possible/sane to choose the multiplier free within some ranges. Storing the multiplier ranges instead of lots of pll configurations reduces the memory needed and may as well improve the performance. It is also expected to provide better pll values resulting in better frequencies for the connected devices. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 377 +++++++++++++------------------------------------ drivers/video/via/hw.h | 11 +- 2 files changed, 106 insertions(+), 282 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index dc4c778877ce..063ff65fbea6 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -22,272 +22,80 @@ #include #include "global.h" -static struct pll_config cle266_pll_config[] = { - {19, 4, 0}, - {26, 5, 0}, - {28, 5, 0}, - {31, 5, 0}, - {33, 5, 0}, - {55, 5, 0}, - {102, 5, 0}, - {53, 6, 0}, - {92, 6, 0}, - {98, 6, 0}, - {112, 6, 0}, - {41, 7, 0}, - {60, 7, 0}, - {99, 7, 0}, - {100, 7, 0}, - {83, 8, 0}, - {86, 8, 0}, - {108, 8, 0}, - {87, 9, 0}, - {118, 9, 0}, - {95, 12, 0}, - {115, 12, 0}, - {108, 13, 0}, - {83, 17, 0}, - {67, 20, 0}, - {86, 20, 0}, - {98, 20, 0}, - {121, 24, 0}, - {99, 29, 0}, - {33, 3, 1}, - {15, 4, 1}, - {23, 4, 1}, - {37, 5, 1}, - {83, 5, 1}, - {85, 5, 1}, - {94, 5, 1}, - {103, 5, 1}, - {109, 5, 1}, - {113, 5, 1}, - {121, 5, 1}, - {82, 6, 1}, - {31, 7, 1}, - {55, 7, 1}, - {84, 7, 1}, - {83, 8, 1}, - {76, 9, 1}, - {127, 9, 1}, - {33, 4, 2}, - {75, 4, 2}, - {119, 4, 2}, - {121, 4, 2}, - {91, 5, 2}, - {118, 5, 2}, - {83, 6, 2}, - {109, 6, 2}, - {90, 7, 2}, - {93, 2, 3}, - {53, 3, 3}, - {73, 4, 3}, - {89, 4, 3}, - {105, 4, 3}, - {117, 4, 3}, - {101, 5, 3}, - {121, 5, 3}, - {127, 5, 3}, - {99, 7, 3} +static struct pll_limit cle266_pll_limits[] = { + {19, 19, 4, 0}, + {26, 102, 5, 0}, + {53, 112, 6, 0}, + {41, 100, 7, 0}, + {83, 108, 8, 0}, + {87, 118, 9, 0}, + {95, 115, 12, 0}, + {108, 108, 13, 0}, + {83, 83, 17, 0}, + {67, 98, 20, 0}, + {121, 121, 24, 0}, + {99, 99, 29, 0}, + {33, 33, 3, 1}, + {15, 23, 4, 1}, + {37, 121, 5, 1}, + {82, 82, 6, 1}, + {31, 84, 7, 1}, + {83, 83, 8, 1}, + {76, 127, 9, 1}, + {33, 121, 4, 2}, + {91, 118, 5, 2}, + {83, 109, 6, 2}, + {90, 90, 7, 2}, + {93, 93, 2, 3}, + {53, 53, 3, 3}, + {73, 117, 4, 3}, + {101, 127, 5, 3}, + {99, 99, 7, 3} }; -static struct pll_config k800_pll_config[] = { - {22, 2, 0}, - {28, 3, 0}, - {81, 3, 1}, - {85, 3, 1}, - {98, 3, 1}, - {112, 3, 1}, - {86, 4, 1}, - {166, 4, 1}, - {109, 5, 1}, - {113, 5, 1}, - {121, 5, 1}, - {131, 5, 1}, - {143, 5, 1}, - {153, 5, 1}, - {66, 3, 2}, - {68, 3, 2}, - {95, 3, 2}, - {106, 3, 2}, - {116, 3, 2}, - {93, 4, 2}, - {119, 4, 2}, - {121, 4, 2}, - {133, 4, 2}, - {137, 4, 2}, - {117, 5, 2}, - {118, 5, 2}, - {120, 5, 2}, - {124, 5, 2}, - {132, 5, 2}, - {137, 5, 2}, - {141, 5, 2}, - {166, 5, 2}, - {170, 5, 2}, - {191, 5, 2}, - {206, 5, 2}, - {208, 5, 2}, - {30, 2, 3}, - {69, 3, 3}, - {82, 3, 3}, - {83, 3, 3}, - {109, 3, 3}, - {114, 3, 3}, - {125, 3, 3}, - {89, 4, 3}, - {103, 4, 3}, - {117, 4, 3}, - {126, 4, 3}, - {150, 4, 3}, - {161, 4, 3}, - {121, 5, 3}, - {127, 5, 3}, - {131, 5, 3}, - {134, 5, 3}, - {148, 5, 3}, - {169, 5, 3}, - {172, 5, 3}, - {182, 5, 3}, - {195, 5, 3}, - {196, 5, 3}, - {208, 5, 3}, - {66, 2, 4}, - {85, 3, 4}, - {141, 4, 4}, - {146, 4, 4}, - {161, 4, 4}, - {177, 5, 4} +static struct pll_limit k800_pll_limits[] = { + {22, 22, 2, 0}, + {28, 28, 3, 0}, + {81, 112, 3, 1}, + {86, 166, 4, 1}, + {109, 153, 5, 1}, + {66, 116, 3, 2}, + {93, 137, 4, 2}, + {117, 208, 5, 2}, + {30, 30, 2, 3}, + {69, 125, 3, 3}, + {89, 161, 4, 3}, + {121, 208, 5, 3}, + {66, 66, 2, 4}, + {85, 85, 3, 4}, + {141, 161, 4, 4}, + {177, 177, 5, 4} }; -static struct pll_config cx700_pll_config[] = { - {98, 3, 1}, - {86, 4, 1}, - {109, 5, 1}, - {110, 5, 1}, - {113, 5, 1}, - {121, 5, 1}, - {131, 5, 1}, - {135, 5, 1}, - {142, 5, 1}, - {143, 5, 1}, - {153, 5, 1}, - {187, 5, 1}, - {208, 5, 1}, - {68, 2, 2}, - {95, 3, 2}, - {116, 3, 2}, - {93, 4, 2}, - {119, 4, 2}, - {133, 4, 2}, - {137, 4, 2}, - {151, 4, 2}, - {166, 4, 2}, - {110, 5, 2}, - {112, 5, 2}, - {117, 5, 2}, - {118, 5, 2}, - {120, 5, 2}, - {132, 5, 2}, - {137, 5, 2}, - {141, 5, 2}, - {151, 5, 2}, - {166, 5, 2}, - {175, 5, 2}, - {191, 5, 2}, - {206, 5, 2}, - {174, 7, 2}, - {82, 3, 3}, - {109, 3, 3}, - {117, 4, 3}, - {150, 4, 3}, - {161, 4, 3}, - {112, 5, 3}, - {115, 5, 3}, - {121, 5, 3}, - {127, 5, 3}, - {129, 5, 3}, - {131, 5, 3}, - {134, 5, 3}, - {138, 5, 3}, - {148, 5, 3}, - {157, 5, 3}, - {169, 5, 3}, - {172, 5, 3}, - {190, 5, 3}, - {195, 5, 3}, - {196, 5, 3}, - {208, 5, 3}, - {141, 5, 4}, - {150, 5, 4}, - {166, 5, 4}, - {176, 5, 4}, - {177, 5, 4}, - {183, 5, 4}, - {202, 5, 4} +static struct pll_limit cx700_pll_limits[] = { + {98, 98, 3, 1}, + {86, 86, 4, 1}, + {109, 208, 5, 1}, + {68, 68, 2, 2}, + {95, 116, 3, 2}, + {93, 166, 4, 2}, + {110, 206, 5, 2}, + {174, 174, 7, 2}, + {82, 109, 3, 3}, + {117, 161, 4, 3}, + {112, 208, 5, 3}, + {141, 202, 5, 4} }; -static struct pll_config vx855_pll_config[] = { - {86, 4, 1}, - {108, 5, 1}, - {110, 5, 1}, - {113, 5, 1}, - {121, 5, 1}, - {131, 5, 1}, - {135, 5, 1}, - {142, 5, 1}, - {143, 5, 1}, - {153, 5, 1}, - {164, 5, 1}, - {187, 5, 1}, - {208, 5, 1}, - {110, 5, 2}, - {112, 5, 2}, - {117, 5, 2}, - {118, 5, 2}, - {124, 5, 2}, - {132, 5, 2}, - {137, 5, 2}, - {141, 5, 2}, - {149, 5, 2}, - {151, 5, 2}, - {159, 5, 2}, - {166, 5, 2}, - {167, 5, 2}, - {172, 5, 2}, - {189, 5, 2}, - {191, 5, 2}, - {194, 5, 2}, - {206, 5, 2}, - {208, 5, 2}, - {83, 3, 3}, - {88, 3, 3}, - {109, 3, 3}, - {112, 3, 3}, - {103, 4, 3}, - {105, 4, 3}, - {161, 4, 3}, - {112, 5, 3}, - {115, 5, 3}, - {121, 5, 3}, - {127, 5, 3}, - {134, 5, 3}, - {137, 5, 3}, - {148, 5, 3}, - {157, 5, 3}, - {169, 5, 3}, - {172, 5, 3}, - {182, 5, 3}, - {191, 5, 3}, - {195, 5, 3}, - {209, 5, 3}, - {142, 4, 4}, - {146, 4, 4}, - {161, 4, 4}, - {141, 5, 4}, - {150, 5, 4}, - {165, 5, 4}, - {176, 5, 4} +static struct pll_limit vx855_pll_limits[] = { + {86, 86, 4, 1}, + {108, 208, 5, 1}, + {110, 208, 5, 2}, + {83, 112, 3, 3}, + {103, 161, 4, 3}, + {112, 209, 5, 3}, + {142, 161, 4, 4}, + {141, 176, 5, 4} }; /* according to VIA Technologies these values are based on experiment */ @@ -1633,17 +1441,34 @@ static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll) return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift; } -static struct pll_config get_pll_config(struct pll_config *config, int size, +static struct pll_config get_pll_config(struct pll_limit *limits, int size, int clk) { - struct pll_config best = config[0]; + struct pll_config cur, up, down, best = {0, 1, 0}; const u32 f0 = 14318180; /* X1 frequency */ - int i; - - for (i = 1; i < size; i++) { - if (abs(get_pll_output_frequency(f0, config[i]) - clk) - < abs(get_pll_output_frequency(f0, best) - clk)) - best = config[i]; + int i, f; + + for (i = 0; i < size; i++) { + cur.rshift = limits[i].rshift; + cur.divisor = limits[i].divisor; + cur.multiplier = clk / ((f0 / cur.divisor)>>cur.rshift); + f = abs(get_pll_output_frequency(f0, cur) - clk); + up = down = cur; + up.multiplier++; + down.multiplier--; + if (abs(get_pll_output_frequency(f0, up) - clk) < f) + cur = up; + else if (abs(get_pll_output_frequency(f0, down) - clk) < f) + cur = down; + + if (cur.multiplier < limits[i].multiplier_min) + cur.multiplier = limits[i].multiplier_min; + else if (cur.multiplier > limits[i].multiplier_max) + cur.multiplier = limits[i].multiplier_max; + + f = abs(get_pll_output_frequency(f0, cur) - clk); + if (f < abs(get_pll_output_frequency(f0, best) - clk)) + best = cur; } return best; @@ -1656,14 +1481,14 @@ u32 viafb_get_clk_value(int clk) switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - value = cle266_encode_pll(get_pll_config(cle266_pll_config, - ARRAY_SIZE(cle266_pll_config), clk)); + value = cle266_encode_pll(get_pll_config(cle266_pll_limits, + ARRAY_SIZE(cle266_pll_limits), clk)); break; case UNICHROME_K800: case UNICHROME_PM800: case UNICHROME_CN700: - value = k800_encode_pll(get_pll_config(k800_pll_config, - ARRAY_SIZE(k800_pll_config), clk)); + value = k800_encode_pll(get_pll_config(k800_pll_limits, + ARRAY_SIZE(k800_pll_limits), clk)); break; case UNICHROME_CX700: case UNICHROME_CN750: @@ -1671,13 +1496,13 @@ u32 viafb_get_clk_value(int clk) case UNICHROME_P4M890: case UNICHROME_P4M900: case UNICHROME_VX800: - value = k800_encode_pll(get_pll_config(cx700_pll_config, - ARRAY_SIZE(cx700_pll_config), clk)); + value = k800_encode_pll(get_pll_config(cx700_pll_limits, + ARRAY_SIZE(cx700_pll_limits), clk)); break; case UNICHROME_VX855: case UNICHROME_VX900: - value = vx855_encode_pll(get_pll_config(vx855_pll_config, - ARRAY_SIZE(vx855_pll_config), clk)); + value = vx855_encode_pll(get_pll_config(vx855_pll_limits, + ARRAY_SIZE(vx855_pll_limits), clk)); break; } diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h index 8858593405aa..63d8d37e157c 100644 --- a/drivers/video/via/hw.h +++ b/drivers/video/via/hw.h @@ -738,12 +738,11 @@ struct pll_config { u8 rshift; }; -struct pll_map { - u32 clk; - struct pll_config cle266_pll; - struct pll_config k800_pll; - struct pll_config cx700_pll; - struct pll_config vx855_pll; +struct pll_limit { + u16 multiplier_min; + u16 multiplier_max; + u8 divisor; + u8 rshift; }; struct rgbLUT { -- cgit v1.2.3 From c91faa61697a60ee5cc653db9b6fd3c7049890a6 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Tue, 22 Mar 2011 20:33:20 +0000 Subject: viafb: remove unused max_hres/vres This patch removes the max_hres and max_vres which are not used at the moment. In general they could be useful but it would be better to get them via any standard EDID implementation and not the buggy incomplete one currently used which is also removed as far as possible. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/chip.h | 2 - drivers/video/via/dvi.c | 138 ++--------------------------------------------- 2 files changed, 3 insertions(+), 137 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h index 1aa0fb3c343e..3ebf20c06eef 100644 --- a/drivers/video/via/chip.h +++ b/drivers/video/via/chip.h @@ -142,8 +142,6 @@ struct tmds_setting_information { int h_active; int v_active; int max_pixel_clock; - int max_hres; - int max_vres; }; struct lvds_setting_information { diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index 41ca198b5098..3dbcd7743f14 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -28,9 +28,6 @@ static int tmds_register_read_bytes(int index, u8 *buff, int buff_len); static void __devinit dvi_get_panel_size_from_DDCv1( struct tmds_chip_information *tmds_chip, struct tmds_setting_information *tmds_setting); -static void __devinit dvi_get_panel_size_from_DDCv2( - struct tmds_chip_information *tmds_chip, - struct tmds_setting_information *tmds_setting); static int viafb_dvi_query_EDID(void); static int check_tmds_chip(int device_id_subaddr, int device_id) @@ -47,17 +44,8 @@ void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n"); viafb_dvi_sense(); - switch (viafb_dvi_query_EDID()) { - case 1: + if (viafb_dvi_query_EDID() == 1) dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting); - break; - case 2: - dvi_get_panel_size_from_DDCv2(tmds_chip, tmds_setting); - break; - default: - printk(KERN_WARNING "viafb_init_dvi_size: DVI panel size undetected!\n"); - break; - } return; } @@ -306,12 +294,7 @@ static int viafb_dvi_query_EDID(void) return EDID_VERSION_1; /* Found EDID1 Table */ } - data0 = (u8) tmds_register_read(0x00); - viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = restore; - if (data0 == 0x20) - return EDID_VERSION_2; /* Found EDID2 Table */ - else - return false; + return false; } /* Get Panel Size Using EDID1 Table */ @@ -319,50 +302,15 @@ static void __devinit dvi_get_panel_size_from_DDCv1( struct tmds_chip_information *tmds_chip, struct tmds_setting_information *tmds_setting) { - int i, max_h = 0, tmp, restore; - unsigned char rData; + int i, restore; unsigned char EDID_DATA[18]; DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n"); restore = tmds_chip->tmds_chip_slave_addr; tmds_chip->tmds_chip_slave_addr = 0xA0; - - rData = tmds_register_read(0x23); - if (rData & 0x3C) - max_h = 640; - if (rData & 0xC0) - max_h = 720; - if (rData & 0x03) - max_h = 800; - - rData = tmds_register_read(0x24); - if (rData & 0xC0) - max_h = 800; - if (rData & 0x1E) - max_h = 1024; - if (rData & 0x01) - max_h = 1280; - for (i = 0x25; i < 0x6D; i++) { switch (i) { - case 0x26: - case 0x28: - case 0x2A: - case 0x2C: - case 0x2E: - case 0x30: - case 0x32: - case 0x34: - rData = tmds_register_read(i); - if (rData == 1) - break; - /* data = (data + 31) * 8 */ - tmp = (rData + 31) << 3; - if (tmp > max_h) - max_h = tmp; - break; - case 0x36: case 0x48: case 0x5A: @@ -383,91 +331,11 @@ static void __devinit dvi_get_panel_size_from_DDCv1( } } - tmds_setting->max_hres = max_h; - switch (max_h) { - case 640: - tmds_setting->max_vres = 480; - break; - case 800: - tmds_setting->max_vres = 600; - break; - case 1024: - tmds_setting->max_vres = 768; - break; - case 1280: - tmds_setting->max_vres = 1024; - break; - case 1400: - tmds_setting->max_vres = 1050; - break; - case 1440: - tmds_setting->max_vres = 1050; - break; - case 1600: - tmds_setting->max_vres = 1200; - break; - case 1920: - tmds_setting->max_vres = 1080; - break; - default: - DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d ! " - "set default panel size.\n", max_h); - break; - } - DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n", tmds_setting->max_pixel_clock); tmds_chip->tmds_chip_slave_addr = restore; } -/* Get Panel Size Using EDID2 Table */ -static void __devinit dvi_get_panel_size_from_DDCv2( - struct tmds_chip_information *tmds_chip, - struct tmds_setting_information *tmds_setting) -{ - int restore; - unsigned char R_Buffer[2]; - - DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv2 \n"); - - restore = tmds_chip->tmds_chip_slave_addr; - tmds_chip->tmds_chip_slave_addr = 0xA2; - - /* Horizontal: 0x76, 0x77 */ - tmds_register_read_bytes(0x76, R_Buffer, 2); - tmds_setting->max_hres = R_Buffer[0] + (R_Buffer[1] << 8); - - switch (tmds_setting->max_hres) { - case 640: - tmds_setting->max_vres = 480; - break; - case 800: - tmds_setting->max_vres = 600; - break; - case 1024: - tmds_setting->max_vres = 768; - break; - case 1280: - tmds_setting->max_vres = 1024; - break; - case 1400: - tmds_setting->max_vres = 1050; - break; - case 1440: - tmds_setting->max_vres = 1050; - break; - case 1600: - tmds_setting->max_vres = 1200; - break; - default: - DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d! " - "set default panel size.\n", tmds_setting->max_hres); - break; - } - - tmds_chip->tmds_chip_slave_addr = restore; -} - /* If Disable DVI, turn off pad */ void viafb_dvi_disable(void) { -- cgit v1.2.3 From 1606f87e98f83512762da6dbc992103ae690ff11 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 23 Mar 2011 13:49:32 +0000 Subject: viafb: call viafb_get_clk_value only in viafb_set_vclock As no caller is interested in the result call viafb_get_clk_value directly from viafb_set_vclock to encapsulate the hardware dependend stuff there. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 32 +++++++++++++++++--------------- drivers/video/via/hw.h | 1 - drivers/video/via/lcd.c | 7 ++----- 3 files changed, 19 insertions(+), 21 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index 063ff65fbea6..c28ae2e85ef6 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1474,7 +1474,7 @@ static struct pll_config get_pll_config(struct pll_limit *limits, int size, return best; } -u32 viafb_get_clk_value(int clk) +static u32 viafb_get_clk_value(int clk) { u32 value = 0; @@ -1512,6 +1512,10 @@ u32 viafb_get_clk_value(int clk) /* Set VCLK*/ void viafb_set_vclock(u32 clk, int set_iga) { + u32 value = viafb_get_clk_value(clk); + + DEBUG_MSG(KERN_INFO "PLL=0x%x", value); + /* H.W. Reset : ON */ viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7); @@ -1520,8 +1524,8 @@ void viafb_set_vclock(u32 clk, int set_iga) switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - via_write_reg(VIASR, SR46, (clk & 0x00FF)); - via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8); + via_write_reg(VIASR, SR46, (value & 0x00FF)); + via_write_reg(VIASR, SR47, (value & 0xFF00) >> 8); break; case UNICHROME_K800: @@ -1535,9 +1539,9 @@ void viafb_set_vclock(u32 clk, int set_iga) case UNICHROME_VX800: case UNICHROME_VX855: case UNICHROME_VX900: - via_write_reg(VIASR, SR44, (clk & 0x0000FF)); - via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8); - via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16); + via_write_reg(VIASR, SR44, (value & 0x0000FF)); + via_write_reg(VIASR, SR45, (value & 0x00FF00) >> 8); + via_write_reg(VIASR, SR46, (value & 0xFF0000) >> 16); break; } } @@ -1547,8 +1551,8 @@ void viafb_set_vclock(u32 clk, int set_iga) switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - via_write_reg(VIASR, SR44, (clk & 0x00FF)); - via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8); + via_write_reg(VIASR, SR44, (value & 0x00FF)); + via_write_reg(VIASR, SR45, (value & 0xFF00) >> 8); break; case UNICHROME_K800: @@ -1562,9 +1566,9 @@ void viafb_set_vclock(u32 clk, int set_iga) case UNICHROME_VX800: case UNICHROME_VX855: case UNICHROME_VX900: - via_write_reg(VIASR, SR4A, (clk & 0x0000FF)); - via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8); - via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16); + via_write_reg(VIASR, SR4A, (value & 0x0000FF)); + via_write_reg(VIASR, SR4B, (value & 0x00FF00) >> 8); + via_write_reg(VIASR, SR4C, (value & 0xFF0000) >> 16); break; } } @@ -1827,7 +1831,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table, int i; int index = 0; int h_addr, v_addr; - u32 pll_D_N, clock, refresh = viafb_refresh; + u32 clock, refresh = viafb_refresh; if (viafb_SAMM_ON && set_iga == IGA2) refresh = viafb_refresh1; @@ -1884,9 +1888,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table, clock = crt_reg.hor_total * crt_reg.ver_total * crt_table[index].refresh_rate; - pll_D_N = viafb_get_clk_value(clock); - DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N); - viafb_set_vclock(pll_D_N, set_iga); + viafb_set_vclock(clock, set_iga); } diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h index 63d8d37e157c..2cdce9b7eb8e 100644 --- a/drivers/video/via/hw.h +++ b/drivers/video/via/hw.h @@ -935,7 +935,6 @@ void viafb_lock_crt(void); void viafb_unlock_crt(void); void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga); void viafb_write_regx(struct io_reg RegTable[], int ItemNum); -u32 viafb_get_clk_value(int clk); void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active); void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\ *p_gfx_dpa_setting); diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c index 64bc7e763103..284e681cc22c 100644 --- a/drivers/video/via/lcd.c +++ b/drivers/video/via/lcd.c @@ -562,7 +562,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table, int set_vres = plvds_setting_info->v_active; int panel_hres = plvds_setting_info->lcd_panel_hres; int panel_vres = plvds_setting_info->lcd_panel_vres; - u32 pll_D_N, clock; + u32 clock; struct display_timing mode_crt_reg, panel_crt_reg; struct crt_mode_table *panel_crt_table = NULL; struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres, @@ -613,10 +613,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table, viafb_load_FIFO_reg(set_iga, set_hres, set_vres); fill_lcd_format(); - - pll_D_N = viafb_get_clk_value(clock); - DEBUG_MSG(KERN_INFO "PLL=0x%x", pll_D_N); - viafb_set_vclock(pll_D_N, set_iga); + viafb_set_vclock(clock, set_iga); lcd_patch_skew(plvds_setting_info, plvds_chip_info); /* If K8M800, enable LCD Prefetch Mode. */ -- cgit v1.2.3 From 0f77d4a052aec7392dbfd3d8942a519d013d66d9 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 23 Mar 2011 17:14:26 +0000 Subject: viafb: prepare for PLL separation This patch splits some functionality to extra functions. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 127 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 84 insertions(+), 43 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index c28ae2e85ef6..bd28e13f83d4 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1430,6 +1430,70 @@ static u32 vx855_encode_pll(struct pll_config pll) | pll.multiplier; } +static inline void cle266_set_primary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ + via_write_reg(VIASR, 0x46, data & 0xFF); + via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ +} + +static inline void k800_set_primary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ + via_write_reg(VIASR, 0x44, data & 0xFF); + via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); + via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ +} + +static inline void cle266_set_secondary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ + via_write_reg(VIASR, 0x44, data & 0xFF); + via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ +} + +static inline void k800_set_secondary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ + via_write_reg(VIASR, 0x4A, data & 0xFF); + via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF); + via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ +} + +static void cle266_set_primary_pll(struct pll_config config) +{ + cle266_set_primary_pll_encoded(cle266_encode_pll(config)); +} + +static void k800_set_primary_pll(struct pll_config config) +{ + k800_set_primary_pll_encoded(k800_encode_pll(config)); +} + +static void vx855_set_primary_pll(struct pll_config config) +{ + k800_set_primary_pll_encoded(vx855_encode_pll(config)); +} + +static void cle266_set_secondary_pll(struct pll_config config) +{ + cle266_set_secondary_pll_encoded(cle266_encode_pll(config)); +} + +static void k800_set_secondary_pll(struct pll_config config) +{ + k800_set_secondary_pll_encoded(k800_encode_pll(config)); +} + +static void vx855_set_secondary_pll(struct pll_config config) +{ + k800_set_secondary_pll_encoded(vx855_encode_pll(config)); +} + static inline u32 get_pll_internal_frequency(u32 ref_freq, struct pll_config pll) { @@ -1474,21 +1538,21 @@ static struct pll_config get_pll_config(struct pll_limit *limits, int size, return best; } -static u32 viafb_get_clk_value(int clk) +static struct pll_config get_best_pll_config(int clk) { - u32 value = 0; + struct pll_config config; switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - value = cle266_encode_pll(get_pll_config(cle266_pll_limits, - ARRAY_SIZE(cle266_pll_limits), clk)); + config = get_pll_config(cle266_pll_limits, + ARRAY_SIZE(cle266_pll_limits), clk); break; case UNICHROME_K800: case UNICHROME_PM800: case UNICHROME_CN700: - value = k800_encode_pll(get_pll_config(k800_pll_limits, - ARRAY_SIZE(k800_pll_limits), clk)); + config = get_pll_config(k800_pll_limits, + ARRAY_SIZE(k800_pll_limits), clk); break; case UNICHROME_CX700: case UNICHROME_CN750: @@ -1496,38 +1560,31 @@ static u32 viafb_get_clk_value(int clk) case UNICHROME_P4M890: case UNICHROME_P4M900: case UNICHROME_VX800: - value = k800_encode_pll(get_pll_config(cx700_pll_limits, - ARRAY_SIZE(cx700_pll_limits), clk)); + config = get_pll_config(cx700_pll_limits, + ARRAY_SIZE(cx700_pll_limits), clk); break; case UNICHROME_VX855: case UNICHROME_VX900: - value = vx855_encode_pll(get_pll_config(vx855_pll_limits, - ARRAY_SIZE(vx855_pll_limits), clk)); + config = get_pll_config(vx855_pll_limits, + ARRAY_SIZE(vx855_pll_limits), clk); break; } - return value; + return config; } /* Set VCLK*/ void viafb_set_vclock(u32 clk, int set_iga) { - u32 value = viafb_get_clk_value(clk); - - DEBUG_MSG(KERN_INFO "PLL=0x%x", value); - - /* H.W. Reset : ON */ - viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7); + struct pll_config config = get_best_pll_config(clk); if (set_iga == IGA1) { /* Change D,N FOR VCLK */ switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - via_write_reg(VIASR, SR46, (value & 0x00FF)); - via_write_reg(VIASR, SR47, (value & 0xFF00) >> 8); + cle266_set_primary_pll(config); break; - case UNICHROME_K800: case UNICHROME_PM800: case UNICHROME_CN700: @@ -1537,11 +1594,11 @@ void viafb_set_vclock(u32 clk, int set_iga) case UNICHROME_P4M890: case UNICHROME_P4M900: case UNICHROME_VX800: + k800_set_primary_pll(config); + break; case UNICHROME_VX855: case UNICHROME_VX900: - via_write_reg(VIASR, SR44, (value & 0x0000FF)); - via_write_reg(VIASR, SR45, (value & 0x00FF00) >> 8); - via_write_reg(VIASR, SR46, (value & 0xFF0000) >> 16); + vx855_set_primary_pll(config); break; } } @@ -1551,10 +1608,8 @@ void viafb_set_vclock(u32 clk, int set_iga) switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: case UNICHROME_K400: - via_write_reg(VIASR, SR44, (value & 0x00FF)); - via_write_reg(VIASR, SR45, (value & 0xFF00) >> 8); + cle266_set_secondary_pll(config); break; - case UNICHROME_K800: case UNICHROME_PM800: case UNICHROME_CN700: @@ -1564,29 +1619,15 @@ void viafb_set_vclock(u32 clk, int set_iga) case UNICHROME_P4M890: case UNICHROME_P4M900: case UNICHROME_VX800: + k800_set_secondary_pll(config); + break; case UNICHROME_VX855: case UNICHROME_VX900: - via_write_reg(VIASR, SR4A, (value & 0x0000FF)); - via_write_reg(VIASR, SR4B, (value & 0x00FF00) >> 8); - via_write_reg(VIASR, SR4C, (value & 0xFF0000) >> 16); + vx855_set_secondary_pll(config); break; } } - /* H.W. Reset : OFF */ - viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7); - - /* Reset PLL */ - if (set_iga == IGA1) { - viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1); - viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1); - } - - if (set_iga == IGA2) { - viafb_write_reg_mask(SR40, VIASR, 0x04, BIT2); - viafb_write_reg_mask(SR40, VIASR, 0x00, BIT2); - } - /* Fire! */ via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */ } -- cgit v1.2.3 From 6c1093af5833d4c69634711d9453287ab9e0cb77 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Wed, 23 Mar 2011 21:04:01 +0000 Subject: viafb: add clock source selection and PLL power management support This patch adds some support for clock source selection as well as PLL power management. The code is unused at the moment but was successfully tested as far as possible. The implementation is according to the documentation for VX700, VX800, VX855, VX900. Probably the source selection works like this starting with K800 and the power managemennt at least since VX700. (guessed based on the initialization in viamode.c) Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index bd28e13f83d4..b38d3b40de95 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1409,6 +1409,42 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active) } +static void set_primary_pll_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x20; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x2D, value, 0x30); +} + +static void set_secondary_pll_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x08; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x2D, value, 0x08); +} + static u32 cle266_encode_pll(struct pll_config pll) { return (pll.multiplier << 8) @@ -1494,6 +1530,58 @@ static void vx855_set_secondary_pll(struct pll_config config) k800_set_secondary_pll_encoded(vx855_encode_pll(config)); } +enum via_clksrc { + VIA_CLKSRC_X1 = 0, + VIA_CLKSRC_TVX1, + VIA_CLKSRC_TVPLL, + VIA_CLKSRC_DVP1TVCLKR, + VIA_CLKSRC_CAP0, + VIA_CLKSRC_CAP1, +}; + +static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll) +{ + u8 data = 0; + + switch (source) { + case VIA_CLKSRC_X1: + data = 0x00; + break; + case VIA_CLKSRC_TVX1: + data = 0x02; + break; + case VIA_CLKSRC_TVPLL: + data = 0x04; /* 0x06 should be the same */ + break; + case VIA_CLKSRC_DVP1TVCLKR: + data = 0x0A; + break; + case VIA_CLKSRC_CAP0: + data = 0xC; + break; + case VIA_CLKSRC_CAP1: + data = 0x0E; + break; + } + + if (!use_pll) + data |= 1; + + return data; +} + +static void set_primary_clock_source(enum via_clksrc source, bool use_pll) +{ + u8 data = set_clock_source_common(source, use_pll) << 4; + via_write_reg_mask(VIACR, 0x6C, data, 0xF0); +} + +static void set_secondary_clock_source(enum via_clksrc source, bool use_pll) +{ + u8 data = set_clock_source_common(source, use_pll); + via_write_reg_mask(VIACR, 0x6C, data, 0x0F); +} + static inline u32 get_pll_internal_frequency(u32 ref_freq, struct pll_config pll) { -- cgit v1.2.3 From c5593d26aea3aba2a7703a0b5d74b4ea8b726889 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Thu, 24 Mar 2011 02:03:42 +0000 Subject: viafb: add primary/secondary clock on/off switches This patch adds functions to enable/disable the display clocks. It also fixes a tiny bug that slipped in with a previous commit but could not yet have caused any problems. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 38 +++++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index b38d3b40de95..712348df0f84 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1409,6 +1409,42 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active) } +static void set_primary_clock_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x20; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x1B, value, 0x30); +} + +static void set_secondary_clock_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x80; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x1B, value, 0xC0); +} + static void set_primary_pll_state(u8 state) { u8 value; @@ -1442,7 +1478,7 @@ static void set_secondary_pll_state(u8 state) return; } - via_write_reg_mask(VIASR, 0x2D, value, 0x08); + via_write_reg_mask(VIASR, 0x2D, value, 0x0C); } static u32 cle266_encode_pll(struct pll_config pll) -- cgit v1.2.3 From 2c536f84c19c73ab1e3411bf1596ff85c4a23783 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Thu, 24 Mar 2011 13:30:09 +0000 Subject: viafb: split clock and PLL code to an extra file This patch is a huge move operation with some rename and introduces an interface to still use the functions. This should be a step in the right direction to reuse the code whenever possible but cleanly separate code that differs on different platform and keeping the complexity as low as possible. pll_config was renamed to via_pll_config to keep the naming scheme. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/Makefile | 2 +- drivers/video/via/hw.c | 288 ++---------------------------------------- drivers/video/via/hw.h | 6 - drivers/video/via/via_clock.c | 280 ++++++++++++++++++++++++++++++++++++++++ drivers/video/via/via_clock.h | 73 +++++++++++ 5 files changed, 368 insertions(+), 281 deletions(-) create mode 100644 drivers/video/via/via_clock.c create mode 100644 drivers/video/via/via_clock.h (limited to 'drivers/video/via') diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile index 96f01ee2a412..5108136e8776 100644 --- a/drivers/video/via/Makefile +++ b/drivers/video/via/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_FB_VIA) += viafb.o viafb-y :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \ via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \ - via-core.o via-gpio.o via_modesetting.o + via-core.o via-gpio.o via_modesetting.o via_clock.o diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index 712348df0f84..f1eff0b4831f 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -21,6 +21,7 @@ #include #include "global.h" +#include "via_clock.h" static struct pll_limit cle266_pll_limits[] = { {19, 19, 4, 0}, @@ -484,6 +485,9 @@ static struct via_device_mapping device_mapping[] = { {VIA_LVDS2, "LVDS2"} }; +/* structure with function pointers to support clock control */ +static struct via_clock clock; + static void load_fix_bit_crtc_reg(void); static void __devinit init_gfx_chip_info(int chip_type); static void __devinit init_tmds_chip_info(void); @@ -1409,230 +1413,10 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active) } -static void set_primary_clock_state(u8 state) -{ - u8 value; - - switch (state) { - case VIA_STATE_ON: - value = 0x20; - break; - case VIA_STATE_OFF: - value = 0x00; - break; - default: - return; - } - - via_write_reg_mask(VIASR, 0x1B, value, 0x30); -} - -static void set_secondary_clock_state(u8 state) -{ - u8 value; - - switch (state) { - case VIA_STATE_ON: - value = 0x80; - break; - case VIA_STATE_OFF: - value = 0x00; - break; - default: - return; - } - - via_write_reg_mask(VIASR, 0x1B, value, 0xC0); -} - -static void set_primary_pll_state(u8 state) -{ - u8 value; - - switch (state) { - case VIA_STATE_ON: - value = 0x20; - break; - case VIA_STATE_OFF: - value = 0x00; - break; - default: - return; - } - - via_write_reg_mask(VIASR, 0x2D, value, 0x30); -} - -static void set_secondary_pll_state(u8 state) -{ - u8 value; - - switch (state) { - case VIA_STATE_ON: - value = 0x08; - break; - case VIA_STATE_OFF: - value = 0x00; - break; - default: - return; - } - - via_write_reg_mask(VIASR, 0x2D, value, 0x0C); -} - -static u32 cle266_encode_pll(struct pll_config pll) -{ - return (pll.multiplier << 8) - | (pll.rshift << 6) - | pll.divisor; -} - -static u32 k800_encode_pll(struct pll_config pll) -{ - return ((pll.divisor - 2) << 16) - | (pll.rshift << 10) - | (pll.multiplier - 2); -} - -static u32 vx855_encode_pll(struct pll_config pll) -{ - return (pll.divisor << 16) - | (pll.rshift << 10) - | pll.multiplier; -} - -static inline void cle266_set_primary_pll_encoded(u32 data) -{ - via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ - via_write_reg(VIASR, 0x46, data & 0xFF); - via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF); - via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ -} - -static inline void k800_set_primary_pll_encoded(u32 data) -{ - via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ - via_write_reg(VIASR, 0x44, data & 0xFF); - via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); - via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF); - via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ -} - -static inline void cle266_set_secondary_pll_encoded(u32 data) -{ - via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ - via_write_reg(VIASR, 0x44, data & 0xFF); - via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); - via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ -} - -static inline void k800_set_secondary_pll_encoded(u32 data) -{ - via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ - via_write_reg(VIASR, 0x4A, data & 0xFF); - via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF); - via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF); - via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ -} - -static void cle266_set_primary_pll(struct pll_config config) -{ - cle266_set_primary_pll_encoded(cle266_encode_pll(config)); -} - -static void k800_set_primary_pll(struct pll_config config) -{ - k800_set_primary_pll_encoded(k800_encode_pll(config)); -} - -static void vx855_set_primary_pll(struct pll_config config) -{ - k800_set_primary_pll_encoded(vx855_encode_pll(config)); -} - -static void cle266_set_secondary_pll(struct pll_config config) -{ - cle266_set_secondary_pll_encoded(cle266_encode_pll(config)); -} - -static void k800_set_secondary_pll(struct pll_config config) -{ - k800_set_secondary_pll_encoded(k800_encode_pll(config)); -} - -static void vx855_set_secondary_pll(struct pll_config config) -{ - k800_set_secondary_pll_encoded(vx855_encode_pll(config)); -} - -enum via_clksrc { - VIA_CLKSRC_X1 = 0, - VIA_CLKSRC_TVX1, - VIA_CLKSRC_TVPLL, - VIA_CLKSRC_DVP1TVCLKR, - VIA_CLKSRC_CAP0, - VIA_CLKSRC_CAP1, -}; - -static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll) -{ - u8 data = 0; - - switch (source) { - case VIA_CLKSRC_X1: - data = 0x00; - break; - case VIA_CLKSRC_TVX1: - data = 0x02; - break; - case VIA_CLKSRC_TVPLL: - data = 0x04; /* 0x06 should be the same */ - break; - case VIA_CLKSRC_DVP1TVCLKR: - data = 0x0A; - break; - case VIA_CLKSRC_CAP0: - data = 0xC; - break; - case VIA_CLKSRC_CAP1: - data = 0x0E; - break; - } - - if (!use_pll) - data |= 1; - - return data; -} - -static void set_primary_clock_source(enum via_clksrc source, bool use_pll) -{ - u8 data = set_clock_source_common(source, use_pll) << 4; - via_write_reg_mask(VIACR, 0x6C, data, 0xF0); -} - -static void set_secondary_clock_source(enum via_clksrc source, bool use_pll) -{ - u8 data = set_clock_source_common(source, use_pll); - via_write_reg_mask(VIACR, 0x6C, data, 0x0F); -} - -static inline u32 get_pll_internal_frequency(u32 ref_freq, - struct pll_config pll) -{ - return ref_freq / pll.divisor * pll.multiplier; -} - -static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll) -{ - return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift; -} - -static struct pll_config get_pll_config(struct pll_limit *limits, int size, +static struct via_pll_config get_pll_config(struct pll_limit *limits, int size, int clk) { - struct pll_config cur, up, down, best = {0, 1, 0}; + struct via_pll_config cur, up, down, best = {0, 1, 0}; const u32 f0 = 14318180; /* X1 frequency */ int i, f; @@ -1662,9 +1446,9 @@ static struct pll_config get_pll_config(struct pll_limit *limits, int size, return best; } -static struct pll_config get_best_pll_config(int clk) +static struct via_pll_config get_best_pll_config(int clk) { - struct pll_config config; + struct via_pll_config config; switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: @@ -1700,57 +1484,12 @@ static struct pll_config get_best_pll_config(int clk) /* Set VCLK*/ void viafb_set_vclock(u32 clk, int set_iga) { - struct pll_config config = get_best_pll_config(clk); + struct via_pll_config config = get_best_pll_config(clk); - if (set_iga == IGA1) { - /* Change D,N FOR VCLK */ - switch (viaparinfo->chip_info->gfx_chip_name) { - case UNICHROME_CLE266: - case UNICHROME_K400: - cle266_set_primary_pll(config); - break; - case UNICHROME_K800: - case UNICHROME_PM800: - case UNICHROME_CN700: - case UNICHROME_CX700: - case UNICHROME_CN750: - case UNICHROME_K8M890: - case UNICHROME_P4M890: - case UNICHROME_P4M900: - case UNICHROME_VX800: - k800_set_primary_pll(config); - break; - case UNICHROME_VX855: - case UNICHROME_VX900: - vx855_set_primary_pll(config); - break; - } - } - - if (set_iga == IGA2) { - /* Change D,N FOR LCK */ - switch (viaparinfo->chip_info->gfx_chip_name) { - case UNICHROME_CLE266: - case UNICHROME_K400: - cle266_set_secondary_pll(config); - break; - case UNICHROME_K800: - case UNICHROME_PM800: - case UNICHROME_CN700: - case UNICHROME_CX700: - case UNICHROME_CN750: - case UNICHROME_K8M890: - case UNICHROME_P4M890: - case UNICHROME_P4M900: - case UNICHROME_VX800: - k800_set_secondary_pll(config); - break; - case UNICHROME_VX855: - case UNICHROME_VX900: - vx855_set_secondary_pll(config); - break; - } - } + if (set_iga == IGA1) + clock.set_primary_pll(config); + if (set_iga == IGA2) + clock.set_secondary_pll(config); /* Fire! */ via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */ @@ -2059,6 +1798,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table, void __devinit viafb_init_chip_info(int chip_type) { + via_clock_init(&clock, chip_type); init_gfx_chip_info(chip_type); init_tmds_chip_info(); init_lvds_chip_info(); diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h index 2cdce9b7eb8e..7e9f51a83126 100644 --- a/drivers/video/via/hw.h +++ b/drivers/video/via/hw.h @@ -732,12 +732,6 @@ struct _lcd_scaling_factor { struct _lcd_ver_scaling_factor lcd_ver_scaling_factor; }; -struct pll_config { - u16 multiplier; - u8 divisor; - u8 rshift; -}; - struct pll_limit { u16 multiplier_min; u16 multiplier_max; diff --git a/drivers/video/via/via_clock.c b/drivers/video/via/via_clock.c new file mode 100644 index 000000000000..29afe4ce3492 --- /dev/null +++ b/drivers/video/via/via_clock.c @@ -0,0 +1,280 @@ +/* + * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + * Copyright 2011 Florian Tobias Schandinat + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; + * either version 2, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even + * the implied warranty of MERCHANTABILITY or FITNESS FOR + * A PARTICULAR PURPOSE.See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * clock and PLL management functions + */ + +#include +#include +#include "via_clock.h" +#include "global.h" +#include "debug.h" + +static inline u32 cle266_encode_pll(struct via_pll_config pll) +{ + return (pll.multiplier << 8) + | (pll.rshift << 6) + | pll.divisor; +} + +static inline u32 k800_encode_pll(struct via_pll_config pll) +{ + return ((pll.divisor - 2) << 16) + | (pll.rshift << 10) + | (pll.multiplier - 2); +} + +static inline u32 vx855_encode_pll(struct via_pll_config pll) +{ + return (pll.divisor << 16) + | (pll.rshift << 10) + | pll.multiplier; +} + +static inline void cle266_set_primary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ + via_write_reg(VIASR, 0x46, data & 0xFF); + via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ +} + +static inline void k800_set_primary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */ + via_write_reg(VIASR, 0x44, data & 0xFF); + via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); + via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ +} + +static inline void cle266_set_secondary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ + via_write_reg(VIASR, 0x44, data & 0xFF); + via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ +} + +static inline void k800_set_secondary_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */ + via_write_reg(VIASR, 0x4A, data & 0xFF); + via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF); + via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ +} + +static void cle266_set_primary_pll(struct via_pll_config config) +{ + cle266_set_primary_pll_encoded(cle266_encode_pll(config)); +} + +static void k800_set_primary_pll(struct via_pll_config config) +{ + k800_set_primary_pll_encoded(k800_encode_pll(config)); +} + +static void vx855_set_primary_pll(struct via_pll_config config) +{ + k800_set_primary_pll_encoded(vx855_encode_pll(config)); +} + +static void cle266_set_secondary_pll(struct via_pll_config config) +{ + cle266_set_secondary_pll_encoded(cle266_encode_pll(config)); +} + +static void k800_set_secondary_pll(struct via_pll_config config) +{ + k800_set_secondary_pll_encoded(k800_encode_pll(config)); +} + +static void vx855_set_secondary_pll(struct via_pll_config config) +{ + k800_set_secondary_pll_encoded(vx855_encode_pll(config)); +} + +static void set_primary_pll_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x20; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x2D, value, 0x30); +} + +static void set_secondary_pll_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x08; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x2D, value, 0x0C); +} + +static void set_primary_clock_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x20; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x1B, value, 0x30); +} + +static void set_secondary_clock_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x80; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x1B, value, 0xC0); +} + +static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll) +{ + u8 data = 0; + + switch (source) { + case VIA_CLKSRC_X1: + data = 0x00; + break; + case VIA_CLKSRC_TVX1: + data = 0x02; + break; + case VIA_CLKSRC_TVPLL: + data = 0x04; /* 0x06 should be the same */ + break; + case VIA_CLKSRC_DVP1TVCLKR: + data = 0x0A; + break; + case VIA_CLKSRC_CAP0: + data = 0xC; + break; + case VIA_CLKSRC_CAP1: + data = 0x0E; + break; + } + + if (!use_pll) + data |= 1; + + return data; +} + +static void set_primary_clock_source(enum via_clksrc source, bool use_pll) +{ + u8 data = set_clock_source_common(source, use_pll) << 4; + via_write_reg_mask(VIACR, 0x6C, data, 0xF0); +} + +static void set_secondary_clock_source(enum via_clksrc source, bool use_pll) +{ + u8 data = set_clock_source_common(source, use_pll); + via_write_reg_mask(VIACR, 0x6C, data, 0x0F); +} + +void via_clock_init(struct via_clock *clock, int gfx_chip) +{ + switch (gfx_chip) { + case UNICHROME_CLE266: + case UNICHROME_K400: + clock->set_primary_clock_state = NULL; + clock->set_primary_clock_source = NULL; + clock->set_primary_pll_state = NULL; + clock->set_primary_pll = cle266_set_primary_pll; + + clock->set_secondary_clock_state = NULL; + clock->set_secondary_clock_source = NULL; + clock->set_secondary_pll_state = NULL; + clock->set_secondary_pll = cle266_set_secondary_pll; + break; + case UNICHROME_K800: + case UNICHROME_PM800: + case UNICHROME_CN700: + case UNICHROME_CX700: + case UNICHROME_CN750: + case UNICHROME_K8M890: + case UNICHROME_P4M890: + case UNICHROME_P4M900: + case UNICHROME_VX800: + clock->set_primary_clock_state = set_primary_clock_state; + clock->set_primary_clock_source = set_primary_clock_source; + clock->set_primary_pll_state = set_primary_pll_state; + clock->set_primary_pll = k800_set_primary_pll; + + clock->set_secondary_clock_state = set_secondary_clock_state; + clock->set_secondary_clock_source = set_secondary_clock_source; + clock->set_secondary_pll_state = set_secondary_pll_state; + clock->set_secondary_pll = k800_set_secondary_pll; + break; + case UNICHROME_VX855: + case UNICHROME_VX900: + clock->set_primary_clock_state = set_primary_clock_state; + clock->set_primary_clock_source = set_primary_clock_source; + clock->set_primary_pll_state = set_primary_pll_state; + clock->set_primary_pll = vx855_set_primary_pll; + + clock->set_secondary_clock_state = set_secondary_clock_state; + clock->set_secondary_clock_source = set_secondary_clock_source; + clock->set_secondary_pll_state = set_secondary_pll_state; + clock->set_secondary_pll = vx855_set_secondary_pll; + break; + + } +} diff --git a/drivers/video/via/via_clock.h b/drivers/video/via/via_clock.h new file mode 100644 index 000000000000..f213a7a8fc79 --- /dev/null +++ b/drivers/video/via/via_clock.h @@ -0,0 +1,73 @@ +/* + * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + * Copyright 2011 Florian Tobias Schandinat + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; + * either version 2, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even + * the implied warranty of MERCHANTABILITY or FITNESS FOR + * A PARTICULAR PURPOSE.See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * clock and PLL management functions + */ + +#ifndef __VIA_CLOCK_H__ +#define __VIA_CLOCK_H__ + +#include + +enum via_clksrc { + VIA_CLKSRC_X1 = 0, + VIA_CLKSRC_TVX1, + VIA_CLKSRC_TVPLL, + VIA_CLKSRC_DVP1TVCLKR, + VIA_CLKSRC_CAP0, + VIA_CLKSRC_CAP1, +}; + +struct via_pll_config { + u16 multiplier; + u8 divisor; + u8 rshift; +}; + +struct via_clock { + void (*set_primary_clock_state)(u8 state); + void (*set_primary_clock_source)(enum via_clksrc src, bool use_pll); + void (*set_primary_pll_state)(u8 state); + void (*set_primary_pll)(struct via_pll_config config); + + void (*set_secondary_clock_state)(u8 state); + void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll); + void (*set_secondary_pll_state)(u8 state); + void (*set_secondary_pll)(struct via_pll_config config); +}; + + +static inline u32 get_pll_internal_frequency(u32 ref_freq, + struct via_pll_config pll) +{ + return ref_freq / pll.divisor * pll.multiplier; +} + +static inline u32 get_pll_output_frequency(u32 ref_freq, + struct via_pll_config pll) +{ + return get_pll_internal_frequency(ref_freq, pll) >> pll.rshift; +} + +void via_clock_init(struct via_clock *clock, int gfx_chip); + +#endif /* __VIA_CLOCK_H__ */ -- cgit v1.2.3 From b692a63af8b63a7a7e84702a713d0072e336b326 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Thu, 24 Mar 2011 14:25:51 +0000 Subject: viafb: add VIA slapping capability This patch introduces dummy functions to execute when we don't know what we should do (due to missing documentation). They do nothing but print a nice message in the log explaining the situation. To trigger this message initial power management support is activated which might save a bit energy by disabling PLL and clock if no device is configured to use them. Note: The message is only shown for the oldest IGPs CLE266 and K400 as for the other platforms there are reasonable assumptions how it does (hopefully) work. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 19 +++++++++++++++++++ drivers/video/via/via_clock.c | 30 ++++++++++++++++++++++++------ 2 files changed, 43 insertions(+), 6 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index f1eff0b4831f..df84251b8f93 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2289,6 +2289,25 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, get_sync(viafbinfo1)); } + clock.set_primary_clock_source(VIA_CLKSRC_X1, true); + clock.set_secondary_clock_source(VIA_CLKSRC_X1, true); + + if (viaparinfo->shared->iga1_devices) { + clock.set_primary_pll_state(VIA_STATE_ON); + clock.set_primary_clock_state(VIA_STATE_ON); + } else { + clock.set_primary_pll_state(VIA_STATE_OFF); + clock.set_primary_clock_state(VIA_STATE_OFF); + } + + if (viaparinfo->shared->iga2_devices) { + clock.set_secondary_pll_state(VIA_STATE_ON); + clock.set_secondary_clock_state(VIA_STATE_ON); + } else { + clock.set_secondary_pll_state(VIA_STATE_OFF); + clock.set_secondary_clock_state(VIA_STATE_OFF); + } + via_set_state(devices, VIA_STATE_ON); device_screen_on(); return 1; diff --git a/drivers/video/via/via_clock.c b/drivers/video/via/via_clock.c index 29afe4ce3492..a829a246881c 100644 --- a/drivers/video/via/via_clock.c +++ b/drivers/video/via/via_clock.c @@ -29,6 +29,9 @@ #include "global.h" #include "debug.h" +const char *via_slap = "Please slap VIA Technologies to motivate them " + "releasing full documentation for your platform!\n"; + static inline u32 cle266_encode_pll(struct via_pll_config pll) { return (pll.multiplier << 8) @@ -229,19 +232,34 @@ static void set_secondary_clock_source(enum via_clksrc source, bool use_pll) via_write_reg_mask(VIACR, 0x6C, data, 0x0F); } +static void dummy_set_clock_state(u8 state) +{ + printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap); +} + +static void dummy_set_clock_source(enum via_clksrc source, bool use_pll) +{ + printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap); +} + +static void dummy_set_pll_state(u8 state) +{ + printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap); +} + void via_clock_init(struct via_clock *clock, int gfx_chip) { switch (gfx_chip) { case UNICHROME_CLE266: case UNICHROME_K400: - clock->set_primary_clock_state = NULL; - clock->set_primary_clock_source = NULL; - clock->set_primary_pll_state = NULL; + clock->set_primary_clock_state = dummy_set_clock_state; + clock->set_primary_clock_source = dummy_set_clock_source; + clock->set_primary_pll_state = dummy_set_pll_state; clock->set_primary_pll = cle266_set_primary_pll; - clock->set_secondary_clock_state = NULL; - clock->set_secondary_clock_source = NULL; - clock->set_secondary_pll_state = NULL; + clock->set_secondary_clock_state = dummy_set_clock_state; + clock->set_secondary_clock_source = dummy_set_clock_source; + clock->set_secondary_pll_state = dummy_set_pll_state; clock->set_secondary_pll = cle266_set_secondary_pll; break; case UNICHROME_K800: -- cgit v1.2.3 From bea02e45874a5d18127b0779740c4fd5b3e7e44a Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 26 Mar 2011 02:29:18 +0000 Subject: viafb: add engine clock support This patch adds support for enabling and configuring the engine on VIAs IGPs. This is the main clock used for everything but pixel output. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 1 + drivers/video/via/via_clock.c | 51 +++++++++++++++++++++++++++++++++++++++++++ drivers/video/via/via_clock.h | 3 +++ 3 files changed, 55 insertions(+) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index df84251b8f93..e5311474219f 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2289,6 +2289,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, get_sync(viafbinfo1)); } + clock.set_engine_pll_state(VIA_STATE_ON); clock.set_primary_clock_source(VIA_CLKSRC_X1, true); clock.set_secondary_clock_source(VIA_CLKSRC_X1, true); diff --git a/drivers/video/via/via_clock.c b/drivers/video/via/via_clock.c index a829a246881c..af8f26b643c1 100644 --- a/drivers/video/via/via_clock.c +++ b/drivers/video/via/via_clock.c @@ -87,6 +87,15 @@ static inline void k800_set_secondary_pll_encoded(u32 data) via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ } +static inline void set_engine_pll_encoded(u32 data) +{ + via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */ + via_write_reg(VIASR, 0x47, data & 0xFF); + via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF); + via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF); + via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */ +} + static void cle266_set_primary_pll(struct via_pll_config config) { cle266_set_primary_pll_encoded(cle266_encode_pll(config)); @@ -117,6 +126,16 @@ static void vx855_set_secondary_pll(struct via_pll_config config) k800_set_secondary_pll_encoded(vx855_encode_pll(config)); } +static void k800_set_engine_pll(struct via_pll_config config) +{ + set_engine_pll_encoded(k800_encode_pll(config)); +} + +static void vx855_set_engine_pll(struct via_pll_config config) +{ + set_engine_pll_encoded(vx855_encode_pll(config)); +} + static void set_primary_pll_state(u8 state) { u8 value; @@ -153,6 +172,24 @@ static void set_secondary_pll_state(u8 state) via_write_reg_mask(VIASR, 0x2D, value, 0x0C); } +static void set_engine_pll_state(u8 state) +{ + u8 value; + + switch (state) { + case VIA_STATE_ON: + value = 0x02; + break; + case VIA_STATE_OFF: + value = 0x00; + break; + default: + return; + } + + via_write_reg_mask(VIASR, 0x2D, value, 0x03); +} + static void set_primary_clock_state(u8 state) { u8 value; @@ -247,6 +284,11 @@ static void dummy_set_pll_state(u8 state) printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap); } +static void dummy_set_pll(struct via_pll_config config) +{ + printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap); +} + void via_clock_init(struct via_clock *clock, int gfx_chip) { switch (gfx_chip) { @@ -261,6 +303,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip) clock->set_secondary_clock_source = dummy_set_clock_source; clock->set_secondary_pll_state = dummy_set_pll_state; clock->set_secondary_pll = cle266_set_secondary_pll; + + clock->set_engine_pll_state = dummy_set_pll_state; + clock->set_engine_pll = dummy_set_pll; break; case UNICHROME_K800: case UNICHROME_PM800: @@ -280,6 +325,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip) clock->set_secondary_clock_source = set_secondary_clock_source; clock->set_secondary_pll_state = set_secondary_pll_state; clock->set_secondary_pll = k800_set_secondary_pll; + + clock->set_engine_pll_state = set_engine_pll_state; + clock->set_engine_pll = k800_set_engine_pll; break; case UNICHROME_VX855: case UNICHROME_VX900: @@ -292,6 +340,9 @@ void via_clock_init(struct via_clock *clock, int gfx_chip) clock->set_secondary_clock_source = set_secondary_clock_source; clock->set_secondary_pll_state = set_secondary_pll_state; clock->set_secondary_pll = vx855_set_secondary_pll; + + clock->set_engine_pll_state = set_engine_pll_state; + clock->set_engine_pll = vx855_set_engine_pll; break; } diff --git a/drivers/video/via/via_clock.h b/drivers/video/via/via_clock.h index f213a7a8fc79..88714ae0d157 100644 --- a/drivers/video/via/via_clock.h +++ b/drivers/video/via/via_clock.h @@ -53,6 +53,9 @@ struct via_clock { void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll); void (*set_secondary_pll_state)(u8 state); void (*set_secondary_pll)(struct via_pll_config config); + + void (*set_engine_pll_state)(u8 state); + void (*set_engine_pll)(struct via_pll_config config); }; -- cgit v1.2.3 From 95d517cfce023eb24c5363ab82377146bd659816 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 26 Mar 2011 23:39:07 +0000 Subject: viafb: gather common good, old VGA initialization in one place This patch moves all unprotected VGA initialization in one table and provides some documentation for those values. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 49 ++++++++++++++++++++++++++++++++++----------- drivers/video/via/viamode.c | 19 ------------------ 2 files changed, 37 insertions(+), 31 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index 0098270ac425..5b9c096654be 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -308,6 +308,42 @@ static struct io_reg scaling_parameters[] = { {VIACR, CR87, 0xFF, 0x1F}, /* LCD Scaling Parameter 14 */ }; +static struct io_reg common_vga[] = { + {VIACR, CR07, 0x10, 0x10}, /* [0] vertical total (bit 8) + [1] vertical display end (bit 8) + [2] vertical retrace start (bit 8) + [3] start vertical blanking (bit 8) + [4] line compare (bit 8) + [5] vertical total (bit 9) + [6] vertical display end (bit 9) + [7] vertical retrace start (bit 9) */ + {VIACR, CR08, 0xFF, 0x00}, /* [0-4] preset row scan + [5-6] byte panning */ + {VIACR, CR09, 0xDF, 0x40}, /* [0-4] max scan line + [5] start vertical blanking (bit 9) + [6] line compare (bit 9) + [7] scan doubling */ + {VIACR, CR0A, 0xFF, 0x1E}, /* [0-4] cursor start + [5] cursor disable */ + {VIACR, CR0B, 0xFF, 0x00}, /* [0-4] cursor end + [5-6] cursor skew */ + {VIACR, CR0E, 0xFF, 0x00}, /* [0-7] cursor location (high) */ + {VIACR, CR0F, 0xFF, 0x00}, /* [0-7] cursor location (low) */ + {VIACR, CR11, 0xF0, 0x80}, /* [0-3] vertical retrace end + [6] memory refresh bandwidth + [7] CRTC register protect enable */ + {VIACR, CR14, 0xFF, 0x00}, /* [0-4] underline location + [5] divide memory address clock by 4 + [6] double word addressing */ + {VIACR, CR17, 0xFF, 0x63}, /* [0-1] mapping of display address 13-14 + [2] divide scan line clock by 2 + [3] divide memory address clock by 2 + [5] address wrap + [6] byte mode select + [7] sync enable */ + {VIACR, CR18, 0xFF, 0xFF}, /* [0-7] line compare */ +}; + static struct fifo_depth_select display_fifo_depth_reg = { /* IGA1 FIFO Depth_Select */ {IGA1_FIFO_DEPTH_SELECT_REG_NUM, {{SR17, 0, 7} } }, @@ -1167,22 +1203,10 @@ static void load_fix_bit_crtc_reg(void) /* always set to 1 */ viafb_write_reg_mask(CR03, VIACR, 0x80, BIT7); /* line compare should set all bits = 1 (extend modes) */ - viafb_write_reg(CR18, VIACR, 0xff); - /* line compare should set all bits = 1 (extend modes) */ - viafb_write_reg_mask(CR07, VIACR, 0x10, BIT4); - /* line compare should set all bits = 1 (extend modes) */ viafb_write_reg_mask(CR35, VIACR, 0x10, BIT4); /* line compare should set all bits = 1 (extend modes) */ viafb_write_reg_mask(CR33, VIACR, 0x06, BIT0 + BIT1 + BIT2); /*viafb_write_reg_mask(CR32, VIACR, 0x01, BIT0); */ - /* extend mode always set to e3h */ - viafb_write_reg(CR17, VIACR, 0xe3); - /* extend mode always set to 0h */ - viafb_write_reg(CR08, VIACR, 0x00); - /* extend mode always set to 0h */ - viafb_write_reg(CR14, VIACR, 0x00); - viafb_write_reg_mask(CR09, VIACR, 0x40, 0xDF); - viafb_write_reg_mask(CR11, VIACR, 0x00, BIT4 + BIT5 + BIT6); viafb_lock_crt(); @@ -2353,6 +2377,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, outb(0x00, VIAAR); /* Write Common Setting for Video Mode */ + viafb_write_regx(common_vga, ARRAY_SIZE(common_vga)); switch (viaparinfo->chip_info->gfx_chip_name) { case UNICHROME_CLE266: viafb_write_regx(CLE266_ModeXregs, NUM_TOTAL_CLE266_ModeXregs); diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c index 8c5bc41ff6a4..036ad3ab6b9d 100644 --- a/drivers/video/via/viamode.c +++ b/drivers/video/via/viamode.c @@ -30,10 +30,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIASR, SR1A, 0xFB, 0x08}, {VIASR, SR1E, 0x0F, 0x01}, {VIASR, SR2A, 0xFF, 0x00}, -{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */ -{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */ -{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */ -{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */ {VIACR, CR32, 0xFF, 0x00}, {VIACR, CR33, 0xFF, 0x00}, {VIACR, CR35, 0xFF, 0x00}, @@ -125,10 +121,6 @@ struct io_reg KM400_ModeXregs[] = { {VIASR, SR2A, 0xFF, 0x00}, /* Power Management Control 5 */ {VIASR, SR2D, 0xFF, 0xFF}, /* Power Management Control 1 */ {VIASR, SR2E, 0xFF, 0xFF}, /* Power Management Control 2 */ - {VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */ - {VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */ - {VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */ - {VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */ {VIACR, CR33, 0xFF, 0x00}, {VIACR, CR55, 0x80, 0x00}, {VIACR, CR5D, 0x80, 0x00}, @@ -162,10 +154,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIASR, SR1E, 0xFF, 0x01}, {VIASR, SR2A, 0xFF, 0x00}, {VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */ -{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */ -{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */ -{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */ -{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */ {VIACR, CR32, 0xFF, 0x00}, {VIACR, CR33, 0xFF, 0x00}, {VIACR, CR35, 0xFF, 0x00}, @@ -205,13 +193,6 @@ struct io_reg VX855_ModeXregs[] = { {VIASR, SR58, 0xFF, 0x00}, {VIASR, SR59, 0xFF, 0x00}, {VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */ -{VIACR, CR09, 0xFF, 0x00}, /* Initial CR09=0*/ -{VIACR, CR11, 0x8F, 0x00}, /* IGA1 initial Vertical end */ -{VIACR, CR17, 0x7F, 0x00}, /* IGA1 CRT Mode control init */ -{VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */ -{VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */ -{VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */ -{VIACR, CR0F, 0xFF, 0x00}, /* Cursor Localtion Low */ {VIACR, CR32, 0xFF, 0x00}, {VIACR, CR33, 0x7F, 0x00}, {VIACR, CR35, 0xFF, 0x00}, -- cgit v1.2.3 From 7f980a06e4a9e3bb26db91da8f0e980b0786023a Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sun, 27 Mar 2011 02:54:32 +0000 Subject: viafb: some small cleanup for global variables We do not need viafb_second{,_virtual}_{xres,yres} outside of viafbdev.c so move them there and eliminate the virtual ones where the only sane usage is done during initalization. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/global.c | 4 ---- drivers/video/via/global.h | 2 -- drivers/video/via/hw.h | 1 - drivers/video/via/viafbdev.c | 16 +++++++--------- drivers/video/via/viafbdev.h | 2 -- 5 files changed, 7 insertions(+), 18 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/global.c b/drivers/video/via/global.c index 1ee511b73307..e10d8249534c 100644 --- a/drivers/video/via/global.c +++ b/drivers/video/via/global.c @@ -40,10 +40,6 @@ int viafb_hotplug_Yres = 480; int viafb_hotplug_bpp = 32; int viafb_hotplug_refresh = 60; int viafb_primary_dev = None_Device; -unsigned int viafb_second_xres = 640; -unsigned int viafb_second_yres = 480; -unsigned int viafb_second_virtual_xres; -unsigned int viafb_second_virtual_yres; int viafb_lcd_panel_id = LCD_PANEL_ID_MAXIMUM + 1; struct fb_info *viafbinfo; struct fb_info *viafbinfo1; diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h index 38ef5ac66953..ff969dc34593 100644 --- a/drivers/video/via/global.h +++ b/drivers/video/via/global.h @@ -73,8 +73,6 @@ extern int viafb_hotplug_bpp; extern int viafb_hotplug_refresh; extern int viafb_primary_dev; -extern unsigned int viafb_second_xres; -extern unsigned int viafb_second_yres; extern int viafb_lcd_panel_id; #endif /* __GLOBAL_H__ */ diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h index 8858593405aa..090d167863a4 100644 --- a/drivers/video/via/hw.h +++ b/drivers/video/via/hw.h @@ -910,7 +910,6 @@ struct via_device_mapping { const char *name; }; -extern unsigned int viafb_second_virtual_xres; extern int viafb_SAMM_ON; extern int viafb_dual_fb; extern int viafb_LCD2_ON; diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index ed9bd7978cc0..eace9a4257f4 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -37,6 +37,8 @@ static char *viafb_mode1; static int viafb_bpp = 32; static int viafb_bpp1 = 32; +static unsigned int viafb_second_xres = 640; +static unsigned int viafb_second_yres = 480; static unsigned int viafb_second_offset; static int viafb_second_size; @@ -440,8 +442,8 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) if (viafb_SAMM_ON == 1) { u.viamode.xres_sec = viafb_second_xres; u.viamode.yres_sec = viafb_second_yres; - u.viamode.virtual_xres_sec = viafb_second_virtual_xres; - u.viamode.virtual_yres_sec = viafb_second_virtual_yres; + u.viamode.virtual_xres_sec = viafb_dual_fb ? viafbinfo1->var.xres_virtual : viafbinfo->var.xres_virtual; + u.viamode.virtual_yres_sec = viafb_dual_fb ? viafbinfo1->var.yres_virtual : viafbinfo->var.yres_virtual; u.viamode.refresh_sec = viafb_refresh1; u.viamode.bpp_sec = viafb_bpp1; } else { @@ -1790,14 +1792,10 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev) parse_mode(viafb_mode, &default_xres, &default_yres); vmode_entry = viafb_get_mode(default_xres, default_yres); - if (viafb_SAMM_ON == 1) { + if (viafb_SAMM_ON == 1) parse_mode(viafb_mode1, &viafb_second_xres, &viafb_second_yres); - viafb_second_virtual_xres = viafb_second_xres; - viafb_second_virtual_yres = viafb_second_yres; - } - default_var.xres = default_xres; default_var.yres = default_yres; default_var.xres_virtual = default_xres; @@ -1841,8 +1839,8 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev) default_var.xres = viafb_second_xres; default_var.yres = viafb_second_yres; - default_var.xres_virtual = viafb_second_virtual_xres; - default_var.yres_virtual = viafb_second_virtual_yres; + default_var.xres_virtual = viafb_second_xres; + default_var.yres_virtual = viafb_second_yres; default_var.bits_per_pixel = viafb_bpp1; viafb_fill_var_timing_info(&default_var, viafb_get_refresh( default_var.xres, default_var.yres, viafb_refresh1), diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h index ff60e1ddcffc..59e40d1bd614 100644 --- a/drivers/video/via/viafbdev.h +++ b/drivers/video/via/viafbdev.h @@ -83,8 +83,6 @@ struct viafb_par { struct chip_information *chip_info; }; -extern unsigned int viafb_second_virtual_yres; -extern unsigned int viafb_second_virtual_xres; extern int viafb_SAMM_ON; extern int viafb_dual_fb; extern int viafb_LCD2_ON; -- cgit v1.2.3 From cd00b1154d3c7d711e83c3c17b831aafe6377532 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sun, 27 Mar 2011 03:36:00 +0000 Subject: viafb: replace custom return values This patch replaces OK/FAIL by true/false which is simpler and saner. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/dvi.c | 22 +++++++++------------- drivers/video/via/dvi.h | 2 +- drivers/video/via/lcd.c | 16 ++++++---------- drivers/video/via/lcd.h | 2 +- drivers/video/via/share.h | 8 -------- 5 files changed, 17 insertions(+), 33 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index 3dbcd7743f14..b1f364745ca0 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -30,12 +30,9 @@ static void __devinit dvi_get_panel_size_from_DDCv1( struct tmds_setting_information *tmds_setting); static int viafb_dvi_query_EDID(void); -static int check_tmds_chip(int device_id_subaddr, int device_id) +static inline bool check_tmds_chip(int device_id_subaddr, int device_id) { - if (tmds_register_read(device_id_subaddr) == device_id) - return OK; - else - return FAIL; + return tmds_register_read(device_id_subaddr) == device_id; } void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, @@ -50,7 +47,7 @@ void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, return; } -int __devinit viafb_tmds_trasmitter_identify(void) +bool __devinit viafb_tmds_trasmitter_identify(void) { unsigned char sr2a = 0, sr1e = 0, sr3e = 0; @@ -89,7 +86,7 @@ int __devinit viafb_tmds_trasmitter_identify(void) viaparinfo->chip_info-> tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31; - if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) { + if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)) { /* * Currently only support 12bits,dual edge,add 24bits mode later */ @@ -100,11 +97,10 @@ int __devinit viafb_tmds_trasmitter_identify(void) viaparinfo->chip_info->tmds_chip_info.tmds_chip_name); DEBUG_MSG(KERN_INFO "\n %2d", viaparinfo->chip_info->tmds_chip_info.i2c_port); - return OK; + return true; } else { viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C; - if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) - != FAIL) { + if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)) { tmds_register_write(0x08, 0x3b); DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n"); DEBUG_MSG(KERN_INFO "\n %2d", @@ -113,7 +109,7 @@ int __devinit viafb_tmds_trasmitter_identify(void) DEBUG_MSG(KERN_INFO "\n %2d", viaparinfo->chip_info-> tmds_chip_info.i2c_port); - return OK; + return true; } } @@ -123,7 +119,7 @@ int __devinit viafb_tmds_trasmitter_identify(void) ((viafb_display_hardware_layout == HW_LAYOUT_DVI_ONLY) || (viafb_display_hardware_layout == HW_LAYOUT_LCD_DVI))) { DEBUG_MSG(KERN_INFO "\n Integrated TMDS ! \n"); - return OK; + return true; } switch (viaparinfo->chip_info->gfx_chip_name) { @@ -147,7 +143,7 @@ int __devinit viafb_tmds_trasmitter_identify(void) tmds_chip_info.tmds_chip_name = NON_TMDS_TRANSMITTER; viaparinfo->chip_info->tmds_chip_info. tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; - return FAIL; + return false; } static void tmds_register_write(int index, u8 data) diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h index 2c525c0c1adb..f473dd010977 100644 --- a/drivers/video/via/dvi.h +++ b/drivers/video/via/dvi.h @@ -56,7 +56,7 @@ int viafb_dvi_sense(void); void viafb_dvi_disable(void); void viafb_dvi_enable(void); -int __devinit viafb_tmds_trasmitter_identify(void); +bool __devinit viafb_tmds_trasmitter_identify(void); void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, struct tmds_setting_information *tmds_setting); void viafb_dvi_set_mode(struct VideoModeTable *videoMode, int mode_bpp, diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c index 64bc7e763103..6984046c6eed 100644 --- a/drivers/video/via/lcd.c +++ b/drivers/video/via/lcd.c @@ -48,7 +48,6 @@ static struct _lcd_scaling_factor lcd_scaling_factor_CLE = { {LCD_VER_SCALING_FACTOR_REG_NUM_CLE, {{CR78, 0, 7}, {CR79, 6, 7} } } }; -static int check_lvds_chip(int device_id_subaddr, int device_id); static bool lvds_identify_integratedlvds(void); static void __devinit fp_id_to_vindex(int panel_id); static int lvds_register_read(int index); @@ -84,12 +83,9 @@ static struct display_timing lcd_centering_timging(struct display_timing mode_crt_reg, struct display_timing panel_crt_reg); -static int check_lvds_chip(int device_id_subaddr, int device_id) +static inline bool check_lvds_chip(int device_id_subaddr, int device_id) { - if (lvds_register_read(device_id_subaddr) == device_id) - return OK; - else - return FAIL; + return lvds_register_read(device_id_subaddr) == device_id; } void __devinit viafb_init_lcd_size(void) @@ -150,7 +146,7 @@ static bool lvds_identify_integratedlvds(void) return true; } -int __devinit viafb_lvds_trasmitter_identify(void) +bool __devinit viafb_lvds_trasmitter_identify(void) { if (viafb_lvds_identify_vt1636(VIA_PORT_31)) { viaparinfo->chip_info->lvds_chip_info.i2c_port = VIA_PORT_31; @@ -175,20 +171,20 @@ int __devinit viafb_lvds_trasmitter_identify(void) viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr = VT1631_LVDS_I2C_ADDR; - if (check_lvds_chip(VT1631_DEVICE_ID_REG, VT1631_DEVICE_ID) != FAIL) { + if (check_lvds_chip(VT1631_DEVICE_ID_REG, VT1631_DEVICE_ID)) { DEBUG_MSG(KERN_INFO "\n VT1631 LVDS ! \n"); DEBUG_MSG(KERN_INFO "\n %2d", viaparinfo->chip_info->lvds_chip_info.lvds_chip_name); DEBUG_MSG(KERN_INFO "\n %2d", viaparinfo->chip_info->lvds_chip_info.lvds_chip_name); - return OK; + return true; } viaparinfo->chip_info->lvds_chip_info.lvds_chip_name = NON_LVDS_TRANSMITTER; viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr = VT1631_LVDS_I2C_ADDR; - return FAIL; + return false; } static void __devinit fp_id_to_vindex(int panel_id) diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h index c7909fe29550..75f60a655b0e 100644 --- a/drivers/video/via/lcd.h +++ b/drivers/video/via/lcd.h @@ -79,7 +79,7 @@ void __devinit viafb_init_lvds_output_interface(struct lvds_chip_information void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table, struct lvds_setting_information *plvds_setting_info, struct lvds_chip_information *plvds_chip_info); -int __devinit viafb_lvds_trasmitter_identify(void); +bool __devinit viafb_lvds_trasmitter_identify(void); void viafb_init_lvds_output_interface(struct lvds_chip_information *plvds_chip_info, struct lvds_setting_information diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h index 4b7831f0d012..beb59bcdf49f 100644 --- a/drivers/video/via/share.h +++ b/drivers/video/via/share.h @@ -22,14 +22,6 @@ #ifndef __SHARE_H__ #define __SHARE_H__ -/* Define Return Value */ -#define FAIL -1 -#define OK 1 - -#ifndef NULL -#define NULL 0 -#endif - /* Define Bit Field */ #define BIT0 0x01 #define BIT1 0x02 -- cgit v1.2.3 From 4d9fd0b72cd80624f9f5c6a4c69c503615bec370 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 26 Mar 2011 03:17:42 +0000 Subject: viafb: delete clock and PLL initialization We do this also in the real program code so there is no reason to do it here too (and here it's hardly readable). Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/viamode.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c index 8c5bc41ff6a4..e550063b89b1 100644 --- a/drivers/video/via/viamode.c +++ b/drivers/video/via/viamode.c @@ -41,7 +41,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIACR, CR69, 0xFF, 0x00}, {VIACR, CR6A, 0xFF, 0x40}, {VIACR, CR6B, 0xFF, 0x00}, -{VIACR, CR6C, 0xFF, 0x00}, {VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */ {VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */ {VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */ @@ -87,7 +86,6 @@ struct io_reg CN700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIACR, CR69, 0xFF, 0x00}, {VIACR, CR6A, 0xFD, 0x40}, {VIACR, CR6B, 0xFF, 0x00}, -{VIACR, CR6C, 0xFF, 0x00}, {VIACR, CR77, 0xFF, 0x00}, /* LCD scaling Factor */ {VIACR, CR78, 0xFF, 0x00}, /* LCD scaling Factor */ {VIACR, CR79, 0xFF, 0x00}, /* LCD scaling Factor */ @@ -161,7 +159,7 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIASR, SR1B, 0xFF, 0xF0}, {VIASR, SR1E, 0xFF, 0x01}, {VIASR, SR2A, 0xFF, 0x00}, -{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */ +{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */ {VIACR, CR0A, 0xFF, 0x1E}, /* Cursor Start */ {VIACR, CR0B, 0xFF, 0x00}, /* Cursor End */ {VIACR, CR0E, 0xFF, 0x00}, /* Cursor Location High */ @@ -174,7 +172,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01}, {VIACR, CR69, 0xFF, 0x00}, {VIACR, CR6A, 0xFF, 0x40}, {VIACR, CR6B, 0xFF, 0x00}, -{VIACR, CR6C, 0xFF, 0x00}, {VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */ {VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */ {VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */ @@ -204,7 +201,7 @@ struct io_reg VX855_ModeXregs[] = { {VIASR, SR2A, 0xF0, 0x00}, {VIASR, SR58, 0xFF, 0x00}, {VIASR, SR59, 0xFF, 0x00}, -{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */ +{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */ {VIACR, CR09, 0xFF, 0x00}, /* Initial CR09=0*/ {VIACR, CR11, 0x8F, 0x00}, /* IGA1 initial Vertical end */ {VIACR, CR17, 0x7F, 0x00}, /* IGA1 CRT Mode control init */ @@ -219,7 +216,6 @@ struct io_reg VX855_ModeXregs[] = { {VIACR, CR69, 0xFF, 0x00}, {VIACR, CR6A, 0xFD, 0x60}, {VIACR, CR6B, 0xFF, 0x00}, -{VIACR, CR6C, 0xFF, 0x00}, {VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */ {VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */ {VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */ -- cgit v1.2.3 From b4ce6a285b65be4fb858728b3bbe9011242b769f Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Fri, 15 Apr 2011 21:35:25 +0000 Subject: viafb: fix OLPC DCON refresh rate This patch fixes a regression introduced by fd3cc69848b7e1873e5f12bbcdd572b20277ecf3a "viafb: remove duplicated clock storage" caused by an incosistent mode which pretended to have a higher refresh rate than it actually had. The wrong refresh rate resulted in a calculated higher pixclock which the OLPC DCON could not handle. By reducing the refresh rate to 50Hz we get close to the old pixclock which makes the OLPC display usable again. Minor other adjustments are needed as 60Hz is assumed to be a safe value which is not true for OLPC DCON. This is no problem as we only support 1200x900 on the OLPC. Signed-off-by: Florian Tobias Schandinat Reported-by: Daniel Drake --- drivers/video/via/hw.c | 8 ++++++-- drivers/video/via/viamode.c | 2 +- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index dc4c778877ce..980e263f1875 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2598,8 +2598,12 @@ int viafb_get_refresh(int hres, int vres, u32 long_refresh) best = &vmode->crtc[i]; } - if (abs(best->refresh_rate - long_refresh) > 3) - return 60; + if (abs(best->refresh_rate - long_refresh) > 3) { + if (hres == 1200 && vres == 900) + return 50; /* OLPC DCON only supports 50 Hz */ + else + return 60; + } return best->refresh_rate; } diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c index 8c5bc41ff6a4..260d339b236c 100644 --- a/drivers/video/via/viamode.c +++ b/drivers/video/via/viamode.c @@ -606,7 +606,7 @@ static struct crt_mode_table CRTM1200x720[] = { /* 1200x900 (DCON) */ static struct crt_mode_table DCON1200x900[] = { /* r_rate, hsp, vsp */ - {REFRESH_60, M1200X900_R60_HSP, M1200X900_R60_VSP, + {REFRESH_50, M1200X900_R60_HSP, M1200X900_R60_VSP, /* The correct htotal is 1240, but this doesn't raster on VX855. */ /* Via suggested changing to a multiple of 16, hence 1264. */ /* HT, HA, HBS, HBE, HSS, HSE, VT, VA, VBS, VBE, VSS, VSE */ -- cgit v1.2.3 From 32fab7bcc79ee0b97277627f456c94202858d851 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 23 Apr 2011 22:06:18 +0000 Subject: viafb: fix OLPC XO 1.5 device connection This patch fixes the devices connected on OLPC. The OLPC panel seems to be connected to DVP1 and LVDS2 for some reasons and if not both are handled correct the display does not work correct or not at all. This patch prevents regressions on the OLPC where it worked by accident but would break in future as the driver did not know the correct devices connected. This might also fix hardware scaling. Hopefully the OLPC is the only device with such a requirement but it will be certainly better to actually know what devices are actually connected and to not work by accident. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index 980e263f1875..b8f01103f5c5 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -20,6 +20,7 @@ */ #include +#include #include "global.h" static struct pll_config cle266_pll_config[] = { @@ -875,6 +876,10 @@ void viafb_set_iga_path(void) viaparinfo->chip_info-> lvds_chip_info2.output_interface); } + + /* looks like the OLPC has its display wired to DVP1 and LVDS2 */ + if (machine_is_olpc()) + viaparinfo->shared->iga2_devices = VIA_DVP1 | VIA_LVDS2; } static void set_color_register(u8 index, u8 red, u8 green, u8 blue) -- cgit v1.2.3 From c5a4e6d725654045e548b1a1f33059a44a06910f Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 23 Apr 2011 22:24:52 +0000 Subject: viafb: reduce OLPC refresh a bit When allowing some PLL calculation we get a frequency that seems to be a bit higher than what the OLPC DCON likes resulting in a still readable but not so good image. We don't really know whether this is a problem with the calculation formula or the OLPC but as other displays seem to be happy with the other modes adjusting the OLPC refresh looks like the better thing. This patch prevents a regression when dynamic PLL calculation is allowed. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/hw.c | 2 +- drivers/video/via/share.h | 1 + drivers/video/via/viamode.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index b8f01103f5c5..56ad185b7b22 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2605,7 +2605,7 @@ int viafb_get_refresh(int hres, int vres, u32 long_refresh) if (abs(best->refresh_rate - long_refresh) > 3) { if (hres == 1200 && vres == 900) - return 50; /* OLPC DCON only supports 50 Hz */ + return 49; /* OLPC DCON only supports 50 Hz */ else return 60; } diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h index 4b7831f0d012..62bed2b12d6e 100644 --- a/drivers/video/via/share.h +++ b/drivers/video/via/share.h @@ -290,6 +290,7 @@ #define HW_LAYOUT_LCD_EXTERNAL_LCD2 0x10 /* Definition Refresh Rate */ +#define REFRESH_49 49 #define REFRESH_50 50 #define REFRESH_60 60 #define REFRESH_75 75 diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c index 260d339b236c..ccb5eec63248 100644 --- a/drivers/video/via/viamode.c +++ b/drivers/video/via/viamode.c @@ -606,7 +606,7 @@ static struct crt_mode_table CRTM1200x720[] = { /* 1200x900 (DCON) */ static struct crt_mode_table DCON1200x900[] = { /* r_rate, hsp, vsp */ - {REFRESH_50, M1200X900_R60_HSP, M1200X900_R60_VSP, + {REFRESH_49, M1200X900_R60_HSP, M1200X900_R60_VSP, /* The correct htotal is 1240, but this doesn't raster on VX855. */ /* Via suggested changing to a multiple of 16, hence 1264. */ /* HT, HA, HBS, HBE, HSS, HSE, VT, VA, VBS, VBE, VSS, VSE */ -- cgit v1.2.3 From 2946294f9aa734efc5873ea2f34131d0a8c0f89a Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sat, 23 Apr 2011 23:52:45 +0000 Subject: viafb: add X server compatibility mode This patch adds a config option to be compatible with X servers like OpenChrome. This is required as for example the X server does not handle things like disabled IGAs/PLLs resulting in a potential freeze on X startup. With this option disabled we can provide some nice features like power management and not reinitializing the hardware on every mode switch (taking long time, causing flickering). Signed-off-by: Florian Tobias Schandinat --- drivers/video/Kconfig | 11 +++++++++++ drivers/video/via/hw.c | 7 +++++++ 2 files changed, 18 insertions(+) (limited to 'drivers/video/via') diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6bafb51bb437..4923b5ec0201 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1607,6 +1607,17 @@ config FB_VIA_DIRECT_PROCFS correct output device configuration. Its use is strongly discouraged. +config FB_VIA_X_COMPATIBILITY + bool "X server compatibility" + depends on FB_VIA + default n + help + This option reduces the functionality (power saving, ...) of the + framebuffer to avoid negative impact on the OpenChrome X server. + If you use any X server other than fbdev you should enable this + otherwise it should be safe to disable it and allow using all + features. + endif config FB_NEOMAGIC diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index e5311474219f..104f3e16010f 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -2293,6 +2293,12 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, clock.set_primary_clock_source(VIA_CLKSRC_X1, true); clock.set_secondary_clock_source(VIA_CLKSRC_X1, true); +#ifdef CONFIG_FB_VIA_X_COMPATIBILITY + clock.set_primary_pll_state(VIA_STATE_ON); + clock.set_primary_clock_state(VIA_STATE_ON); + clock.set_secondary_pll_state(VIA_STATE_ON); + clock.set_secondary_clock_state(VIA_STATE_ON); +#else if (viaparinfo->shared->iga1_devices) { clock.set_primary_pll_state(VIA_STATE_ON); clock.set_primary_clock_state(VIA_STATE_ON); @@ -2308,6 +2314,7 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp, clock.set_secondary_pll_state(VIA_STATE_OFF); clock.set_secondary_clock_state(VIA_STATE_OFF); } +#endif /*CONFIG_FB_VIA_X_COMPATIBILITY*/ via_set_state(devices, VIA_STATE_ON); device_screen_on(); -- cgit v1.2.3 From cace71b318aa0126e7cfe49fe5e9133e0395c478 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Sun, 24 Apr 2011 17:08:44 +0000 Subject: viafb: use write combining for video ram This can give a speed up of factor 6-9, which is quite notable. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/via-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c index 6723d6910cde..5b0129b42d8a 100644 --- a/drivers/video/via/via-core.c +++ b/drivers/video/via/via-core.c @@ -505,7 +505,7 @@ static int __devinit via_pci_setup_mmio(struct viafb_dev *vdev) ret = vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type); if (ret < 0) goto out_unmap; - vdev->fbmem = ioremap_nocache(vdev->fbmem_start, vdev->fbmem_len); + vdev->fbmem = ioremap_wc(vdev->fbmem_start, vdev->fbmem_len); if (vdev->fbmem == NULL) { ret = -ENOMEM; goto out_unmap; -- cgit v1.2.3 From 9d5f96f61837b1242dd8c576c6110593475fcf86 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Mon, 25 Apr 2011 20:01:46 +0000 Subject: viafb: try to map less memory in case of failure The current code might result in trying to remap 512MB video ram on a 32 bit system which is quite likely to fail. This patch tries to map less of it down to 8MB as this should still be enough to get a reasonably well working framebuffer. This should make viafb work for many people without requiring them to manually allocate more space. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/via-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c index 5b0129b42d8a..eb112b621735 100644 --- a/drivers/video/via/via-core.c +++ b/drivers/video/via/via-core.c @@ -505,7 +505,14 @@ static int __devinit via_pci_setup_mmio(struct viafb_dev *vdev) ret = vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type); if (ret < 0) goto out_unmap; - vdev->fbmem = ioremap_wc(vdev->fbmem_start, vdev->fbmem_len); + + /* try to map less memory on failure, 8 MB should be still enough */ + for (; vdev->fbmem_len >= 8 << 20; vdev->fbmem_len /= 2) { + vdev->fbmem = ioremap_wc(vdev->fbmem_start, vdev->fbmem_len); + if (vdev->fbmem) + break; + } + if (vdev->fbmem == NULL) { ret = -ENOMEM; goto out_unmap; -- cgit v1.2.3 From e01255d698ad00a6f4c6b3e0bf061e27ab238969 Mon Sep 17 00:00:00 2001 From: Florian Tobias Schandinat Date: Tue, 26 Apr 2011 08:10:33 +0000 Subject: viafb: remove unused CEA mode This trivial patch removes unused mode tables. Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/share.h | 8 -------- drivers/video/via/viamode.c | 17 ----------------- drivers/video/via/viamode.h | 9 --------- 3 files changed, 34 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h index 8b93e2f6fea2..61b0bd596b85 100644 --- a/drivers/video/via/share.h +++ b/drivers/video/via/share.h @@ -568,10 +568,6 @@ #define M1280X720_R50_HSP NEGATIVE #define M1280X720_R50_VSP POSITIVE -/* 1280x720@60 Sync Polarity (CEA Mode) */ -#define M1280X720_CEA_R60_HSP POSITIVE -#define M1280X720_CEA_R60_VSP POSITIVE - /* 1440x900@60 Sync Polarity (CVT Mode) */ #define M1440X900_R60_HSP NEGATIVE #define M1440X900_R60_VSP POSITIVE @@ -612,10 +608,6 @@ #define M1920X1200_RB_R60_HSP POSITIVE #define M1920X1200_RB_R60_VSP NEGATIVE -/* 1920x1080@60 Sync Polarity (CEA Mode) */ -#define M1920X1080_CEA_R60_HSP POSITIVE -#define M1920X1080_CEA_R60_VSP POSITIVE - /* 2048x1536@60 Sync Polarity (CVT Mode) */ #define M2048x1536_R60_HSP NEGATIVE #define M2048x1536_R60_VSP POSITIVE diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c index 50de07f27a6c..58df74e1417e 100644 --- a/drivers/video/via/viamode.c +++ b/drivers/video/via/viamode.c @@ -854,23 +854,6 @@ static struct VideoModeTable viafb_rb_modes[] = { {CRTM1920x1200_RB, ARRAY_SIZE(CRTM1920x1200_RB)} }; -struct crt_mode_table CEAM1280x720[] = { - {REFRESH_60, M1280X720_CEA_R60_HSP, M1280X720_CEA_R60_VSP, - /* HT, HA, HBS, HBE, HSS, HSE, VT, VA, VBS, VBE, VSS, VSE */ - {1650, 1280, 1280, 370, 1390, 40, 750, 720, 720, 30, 725, 5} } -}; -struct crt_mode_table CEAM1920x1080[] = { - {REFRESH_60, M1920X1080_CEA_R60_HSP, M1920X1080_CEA_R60_VSP, - /* HT, HA, HBS, HBE, HSS, HSE, VT, VA, VBS, VBE, VSS, VSE */ - {2200, 1920, 1920, 300, 2008, 44, 1125, 1080, 1080, 45, 1084, 5} } -}; -struct VideoModeTable CEA_HDMI_Modes[] = { - /* Display : 1280x720 */ - {CEAM1280x720, ARRAY_SIZE(CEAM1280x720)}, - {CEAM1920x1080, ARRAY_SIZE(CEAM1920x1080)} -}; - -int NUM_TOTAL_CEA_MODES = ARRAY_SIZE(CEA_HDMI_Modes); int NUM_TOTAL_CN400_ModeXregs = ARRAY_SIZE(CN400_ModeXregs); int NUM_TOTAL_CN700_ModeXregs = ARRAY_SIZE(CN700_ModeXregs); int NUM_TOTAL_KM400_ModeXregs = ARRAY_SIZE(KM400_ModeXregs); diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h index 8a67ea1b5ef0..3751289eb450 100644 --- a/drivers/video/via/viamode.h +++ b/drivers/video/via/viamode.h @@ -41,7 +41,6 @@ struct patch_table { struct io_reg *io_reg_table; }; -extern int NUM_TOTAL_CEA_MODES; extern int NUM_TOTAL_CN400_ModeXregs; extern int NUM_TOTAL_CN700_ModeXregs; extern int NUM_TOTAL_KM400_ModeXregs; @@ -50,14 +49,6 @@ extern int NUM_TOTAL_VX855_ModeXregs; extern int NUM_TOTAL_CLE266_ModeXregs; extern int NUM_TOTAL_PATCH_MODE; -/********************/ -/* Mode Table */ -/********************/ - -extern struct crt_mode_table CEAM1280x720[]; -extern struct crt_mode_table CEAM1920x1080[]; -extern struct VideoModeTable CEA_HDMI_Modes[]; - extern struct io_reg CN400_ModeXregs[]; extern struct io_reg CN700_ModeXregs[]; extern struct io_reg KM400_ModeXregs[]; -- cgit v1.2.3 From 8aa4d96fe3e4cda9a6469b22b3f017ed30996b10 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 10 May 2011 22:34:11 +0100 Subject: viafb: Automatic OLPC XO-1.5 configuration Currently, a long set of viafb options are needed to get the XO-1.5 laptop to output video (there is only 1 configuration that works, that can't really be autodetected). This patch automatically detects and configures viafb for the XO-1.5 laptop, meaning all that is required for working display is that viafb is loaded. Signed-off-by: Daniel Drake Signed-off-by: Florian Tobias Schandinat --- drivers/video/via/viafbdev.c | 39 ++++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-) (limited to 'drivers/video/via') diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index eace9a4257f4..3114a8755c13 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -24,6 +24,7 @@ #include #include #include +#include #define _MASTER_FILE #include "global.h" @@ -1011,8 +1012,13 @@ static int __init parse_active_dev(void) /* Note: The previous of active_dev is primary device, and the following is secondary device. */ if (!viafb_active_dev) { - viafb_CRT_ON = STATE_ON; - viafb_SAMM_ON = STATE_OFF; + if (machine_is_olpc()) { /* LCD only */ + viafb_LCD_ON = STATE_ON; + viafb_SAMM_ON = STATE_OFF; + } else { + viafb_CRT_ON = STATE_ON; + viafb_SAMM_ON = STATE_OFF; + } } else if (!strcmp(viafb_active_dev, "CRT+DVI")) { /* CRT+DVI */ viafb_CRT_ON = STATE_ON; @@ -1665,8 +1671,13 @@ static int parse_mode(const char *str, u32 *xres, u32 *yres) char *ptr; if (!str) { - *xres = 640; - *yres = 480; + if (machine_is_olpc()) { + *xres = 1200; + *yres = 900; + } else { + *xres = 640; + *yres = 480; + } return 0; } @@ -1922,11 +1933,16 @@ void __devexit via_fb_pci_remove(struct pci_dev *pdev) } #ifndef MODULE -static int __init viafb_setup(char *options) +static int __init viafb_setup(void) { char *this_opt; + char *options; + DEBUG_MSG(KERN_INFO "viafb_setup!\n"); + if (fb_get_options("viafb", &options)) + return -ENODEV; + if (!options || !*options) return 0; @@ -2000,11 +2016,16 @@ static int __init viafb_setup(char *options) int __init viafb_init(void) { u32 dummy_x, dummy_y; + int r; + + if (machine_is_olpc()) + /* Apply XO-1.5-specific configuration. */ + viafb_lcd_panel_id = 23; + #ifndef MODULE - char *option = NULL; - if (fb_get_options("viafb", &option)) - return -ENODEV; - viafb_setup(option); + r = viafb_setup(); + if (r < 0) + return r; #endif if (parse_mode(viafb_mode, &dummy_x, &dummy_y) || !viafb_get_mode(dummy_x, dummy_y) -- cgit v1.2.3