From 8bf344d7ffe919f1f9fe7018dae80470fc4fa0b7 Mon Sep 17 00:00:00 2001 From: Mathieu OTHACEHE Date: Thu, 12 May 2016 10:48:33 +0200 Subject: USB: serial: ti_usb_3410_5052: remove useless comments Remove lines commenting the obvious. Remove vi related comment. Signed-off-by: Mathieu OTHACEHE Signed-off-by: Johan Hovold --- drivers/usb/serial/ti_usb_3410_5052.c | 23 ++--------------------- 1 file changed, 2 insertions(+), 21 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e7dbbef2af2a..903b45c3fae6 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1,5 +1,4 @@ -/* vi: ts=8 sw=8 - * +/* * TI 3410/5052 USB Serial Driver * * Copyright (C) 2004 Texas Instruments @@ -37,8 +36,6 @@ #include "ti_usb_3410_5052.h" -/* Defines */ - #define TI_DRIVER_AUTHOR "Al Borchers " #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" @@ -58,9 +55,6 @@ #define TI_EXTRA_VID_PID_COUNT 5 - -/* Structures */ - struct ti_port { int tp_is_open; __u8 tp_msr; @@ -84,9 +78,6 @@ struct ti_device { int td_urb_error; }; - -/* Function Declarations */ - static int ti_startup(struct usb_serial *serial); static void ti_release(struct usb_serial *serial); static int ti_port_probe(struct usb_serial_port *port); @@ -136,13 +127,8 @@ static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, static int ti_download_firmware(struct ti_device *tdev); - -/* Data */ - -/* module parameters */ static int closing_wait = TI_DEFAULT_CLOSING_WAIT; -/* supported devices */ static const struct usb_device_id ti_id_table_3410[] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, @@ -174,7 +160,7 @@ static const struct usb_device_id ti_id_table_5052[] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, - { } /* terminator */ + { } }; static const struct usb_device_id ti_id_table_combined[] = { @@ -275,8 +261,6 @@ static struct usb_serial_driver * const serial_drivers[] = { &ti_1port_device, &ti_2port_device, NULL }; -/* Module */ - MODULE_AUTHOR(TI_DRIVER_AUTHOR); MODULE_DESCRIPTION(TI_DRIVER_DESC); MODULE_LICENSE("GPL"); @@ -302,8 +286,6 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined); module_usb_serial_driver(serial_drivers, ti_id_table_combined); -/* Functions */ - static int ti_startup(struct usb_serial *serial) { struct ti_device *tdev; @@ -319,7 +301,6 @@ static int ti_startup(struct usb_serial *serial) dev->descriptor.bNumConfigurations, dev->actconfig->desc.bConfigurationValue); - /* create device structure */ tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); if (!tdev) return -ENOMEM; -- cgit v1.2.3 From 735ad1e261b8833cd2cc8c36d8955fcef1e62a62 Mon Sep 17 00:00:00 2001 From: Mathieu OTHACEHE Date: Thu, 12 May 2016 10:48:34 +0200 Subject: USB: serial: ti_usb_3410_5052: use __packed __packed is preferred over __attribute__((packed)) for portability. Signed-off-by: Mathieu OTHACEHE Signed-off-by: Johan Hovold --- drivers/usb/serial/ti_usb_3410_5052.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index bbfd3a184600..c39b13ed8747 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -174,7 +174,7 @@ struct ti_uart_config { char cXon; char cXoff; __u8 bUartMode; -} __attribute__((packed)); +} __packed; /* Get port status */ struct ti_port_status { @@ -183,7 +183,7 @@ struct ti_port_status { __u8 bErrorCode; __u8 bMSR; __u8 bLSR; -} __attribute__((packed)); +} __packed; /* Purge modes */ #define TI_PURGE_OUTPUT 0x00 @@ -211,7 +211,7 @@ struct ti_write_data_bytes { __be16 wBaseAddrHi; __be16 wBaseAddrLo; __u8 bData[0]; -} __attribute__((packed)); +} __packed; struct ti_read_data_request { __u8 bAddrType; @@ -219,20 +219,20 @@ struct ti_read_data_request { __u8 bDataCounter; __be16 wBaseAddrHi; __be16 wBaseAddrLo; -} __attribute__((packed)); +} __packed; struct ti_read_data_bytes { __u8 bCmdCode; __u8 bModuleId; __u8 bErrorCode; __u8 bData[0]; -} __attribute__((packed)); +} __packed; /* Interrupt struct */ struct ti_interrupt { __u8 bICode; __u8 bIInfo; -} __attribute__((packed)); +} __packed; /* Interrupt codes */ #define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) @@ -248,7 +248,7 @@ struct ti_interrupt { struct ti_firmware_header { __le16 wLength; __u8 bCheckSum; -} __attribute__((packed)); +} __packed; /* UART addresses */ #define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */ -- cgit v1.2.3 From 4ab0e0da94865f5f58ec856fe4b4304a45ce7713 Mon Sep 17 00:00:00 2001 From: Mathieu OTHACEHE Date: Thu, 12 May 2016 10:48:35 +0200 Subject: USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h The definitions in ti_usb_3410_5052.h are only used in ti_usb_3410_5052.c. The content of the header is copied in ti_usb_3410_5052.c. Also correct a typo in macro TI_PIPE_MODE_CONTINOUS. Signed-off-by: Mathieu OTHACEHE [johan: actually remove the header file ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ti_usb_3410_5052.c | 237 ++++++++++++++++++++++++++++++- drivers/usb/serial/ti_usb_3410_5052.h | 259 ---------------------------------- 2 files changed, 235 insertions(+), 261 deletions(-) delete mode 100644 drivers/usb/serial/ti_usb_3410_5052.h (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 903b45c3fae6..6002e8bfc9ac 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -34,7 +34,240 @@ #include #include -#include "ti_usb_3410_5052.h" +/* Configuration ids */ +#define TI_BOOT_CONFIG 1 +#define TI_ACTIVE_CONFIG 2 + +/* Vendor and product ids */ +#define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 +#define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 +#define IBM_454B_PRODUCT_ID 0x454b +#define IBM_454C_PRODUCT_ID 0x454c +#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ +#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ +#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ +#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ +#define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */ +#define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */ + +/* Multi-Tech vendor and product ids */ +#define MTS_VENDOR_ID 0x06E0 +#define MTS_GSM_NO_FW_PRODUCT_ID 0xF108 +#define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109 +#define MTS_CDMA_PRODUCT_ID 0xF110 +#define MTS_GSM_PRODUCT_ID 0xF111 +#define MTS_EDGE_PRODUCT_ID 0xF112 +#define MTS_MT9234MU_PRODUCT_ID 0xF114 +#define MTS_MT9234ZBA_PRODUCT_ID 0xF115 +#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 + +/* Abbott Diabetics vendor and product ids */ +#define ABBOTT_VENDOR_ID 0x1a61 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 + +/* Honeywell vendor and product IDs */ +#define HONEYWELL_VENDOR_ID 0x10ac +#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */ + +/* Moxa UPORT 11x0 vendor and product IDs */ +#define MXU1_VENDOR_ID 0x110a +#define MXU1_1110_PRODUCT_ID 0x1110 +#define MXU1_1130_PRODUCT_ID 0x1130 +#define MXU1_1150_PRODUCT_ID 0x1150 +#define MXU1_1151_PRODUCT_ID 0x1151 +#define MXU1_1131_PRODUCT_ID 0x1131 + +/* Commands */ +#define TI_GET_VERSION 0x01 +#define TI_GET_PORT_STATUS 0x02 +#define TI_GET_PORT_DEV_INFO 0x03 +#define TI_GET_CONFIG 0x04 +#define TI_SET_CONFIG 0x05 +#define TI_OPEN_PORT 0x06 +#define TI_CLOSE_PORT 0x07 +#define TI_START_PORT 0x08 +#define TI_STOP_PORT 0x09 +#define TI_TEST_PORT 0x0A +#define TI_PURGE_PORT 0x0B +#define TI_RESET_EXT_DEVICE 0x0C +#define TI_WRITE_DATA 0x80 +#define TI_READ_DATA 0x81 +#define TI_REQ_TYPE_CLASS 0x82 + +/* Module identifiers */ +#define TI_I2C_PORT 0x01 +#define TI_IEEE1284_PORT 0x02 +#define TI_UART1_PORT 0x03 +#define TI_UART2_PORT 0x04 +#define TI_RAM_PORT 0x05 + +/* Modem status */ +#define TI_MSR_DELTA_CTS 0x01 +#define TI_MSR_DELTA_DSR 0x02 +#define TI_MSR_DELTA_RI 0x04 +#define TI_MSR_DELTA_CD 0x08 +#define TI_MSR_CTS 0x10 +#define TI_MSR_DSR 0x20 +#define TI_MSR_RI 0x40 +#define TI_MSR_CD 0x80 +#define TI_MSR_DELTA_MASK 0x0F +#define TI_MSR_MASK 0xF0 + +/* Line status */ +#define TI_LSR_OVERRUN_ERROR 0x01 +#define TI_LSR_PARITY_ERROR 0x02 +#define TI_LSR_FRAMING_ERROR 0x04 +#define TI_LSR_BREAK 0x08 +#define TI_LSR_ERROR 0x0F +#define TI_LSR_RX_FULL 0x10 +#define TI_LSR_TX_EMPTY 0x20 + +/* Line control */ +#define TI_LCR_BREAK 0x40 + +/* Modem control */ +#define TI_MCR_LOOP 0x04 +#define TI_MCR_DTR 0x10 +#define TI_MCR_RTS 0x20 + +/* Mask settings */ +#define TI_UART_ENABLE_RTS_IN 0x0001 +#define TI_UART_DISABLE_RTS 0x0002 +#define TI_UART_ENABLE_PARITY_CHECKING 0x0008 +#define TI_UART_ENABLE_DSR_OUT 0x0010 +#define TI_UART_ENABLE_CTS_OUT 0x0020 +#define TI_UART_ENABLE_X_OUT 0x0040 +#define TI_UART_ENABLE_XA_OUT 0x0080 +#define TI_UART_ENABLE_X_IN 0x0100 +#define TI_UART_ENABLE_DTR_IN 0x0800 +#define TI_UART_DISABLE_DTR 0x1000 +#define TI_UART_ENABLE_MS_INTS 0x2000 +#define TI_UART_ENABLE_AUTO_START_DMA 0x4000 + +/* Parity */ +#define TI_UART_NO_PARITY 0x00 +#define TI_UART_ODD_PARITY 0x01 +#define TI_UART_EVEN_PARITY 0x02 +#define TI_UART_MARK_PARITY 0x03 +#define TI_UART_SPACE_PARITY 0x04 + +/* Stop bits */ +#define TI_UART_1_STOP_BITS 0x00 +#define TI_UART_1_5_STOP_BITS 0x01 +#define TI_UART_2_STOP_BITS 0x02 + +/* Bits per character */ +#define TI_UART_5_DATA_BITS 0x00 +#define TI_UART_6_DATA_BITS 0x01 +#define TI_UART_7_DATA_BITS 0x02 +#define TI_UART_8_DATA_BITS 0x03 + +/* 232/485 modes */ +#define TI_UART_232 0x00 +#define TI_UART_485_RECEIVER_DISABLED 0x01 +#define TI_UART_485_RECEIVER_ENABLED 0x02 + +/* Pipe transfer mode and timeout */ +#define TI_PIPE_MODE_CONTINUOUS 0x01 +#define TI_PIPE_MODE_MASK 0x03 +#define TI_PIPE_TIMEOUT_MASK 0x7C +#define TI_PIPE_TIMEOUT_ENABLE 0x80 + +/* Config struct */ +struct ti_uart_config { + __u16 wBaudRate; + __u16 wFlags; + __u8 bDataBits; + __u8 bParity; + __u8 bStopBits; + char cXon; + char cXoff; + __u8 bUartMode; +} __packed; + +/* Get port status */ +struct ti_port_status { + __u8 bCmdCode; + __u8 bModuleId; + __u8 bErrorCode; + __u8 bMSR; + __u8 bLSR; +} __packed; + +/* Purge modes */ +#define TI_PURGE_OUTPUT 0x00 +#define TI_PURGE_INPUT 0x80 + +/* Read/Write data */ +#define TI_RW_DATA_ADDR_SFR 0x10 +#define TI_RW_DATA_ADDR_IDATA 0x20 +#define TI_RW_DATA_ADDR_XDATA 0x30 +#define TI_RW_DATA_ADDR_CODE 0x40 +#define TI_RW_DATA_ADDR_GPIO 0x50 +#define TI_RW_DATA_ADDR_I2C 0x60 +#define TI_RW_DATA_ADDR_FLASH 0x70 +#define TI_RW_DATA_ADDR_DSP 0x80 + +#define TI_RW_DATA_UNSPECIFIED 0x00 +#define TI_RW_DATA_BYTE 0x01 +#define TI_RW_DATA_WORD 0x02 +#define TI_RW_DATA_DOUBLE_WORD 0x04 + +struct ti_write_data_bytes { + __u8 bAddrType; + __u8 bDataType; + __u8 bDataCounter; + __be16 wBaseAddrHi; + __be16 wBaseAddrLo; + __u8 bData[0]; +} __packed; + +struct ti_read_data_request { + __u8 bAddrType; + __u8 bDataType; + __u8 bDataCounter; + __be16 wBaseAddrHi; + __be16 wBaseAddrLo; +} __packed; + +struct ti_read_data_bytes { + __u8 bCmdCode; + __u8 bModuleId; + __u8 bErrorCode; + __u8 bData[0]; +} __packed; + +/* Interrupt struct */ +struct ti_interrupt { + __u8 bICode; + __u8 bIInfo; +} __packed; + +/* Interrupt codes */ +#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) +#define TI_CODE_HARDWARE_ERROR 0xFF +#define TI_CODE_DATA_ERROR 0x03 +#define TI_CODE_MODEM_STATUS 0x04 + +/* Download firmware max packet size */ +#define TI_DOWNLOAD_MAX_PACKET_SIZE 64 + +/* Firmware image header */ +struct ti_firmware_header { + __le16 wLength; + __u8 bCheckSum; +} __packed; + +/* UART addresses */ +#define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */ +#define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */ +#define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */ +#define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */ #define TI_DRIVER_AUTHOR "Al Borchers " #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" @@ -416,7 +649,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) struct urb *urb; int port_number; int status; - __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | + __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINUOUS | TI_PIPE_TIMEOUT_ENABLE | (TI_TRANSFER_TIMEOUT << 2)); diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h deleted file mode 100644 index c39b13ed8747..000000000000 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ /dev/null @@ -1,259 +0,0 @@ -/* vi: ts=8 sw=8 - * - * TI 3410/5052 USB Serial Driver Header - * - * Copyright (C) 2004 Texas Instruments - * - * This driver is based on the Linux io_ti driver, which is - * Copyright (C) 2000-2002 Inside Out Networks - * Copyright (C) 2001-2002 Greg Kroah-Hartman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * For questions or problems with this driver, contact Texas Instruments - * technical support, or Al Borchers , or - * Peter Berger . - */ - -#ifndef _TI_3410_5052_H_ -#define _TI_3410_5052_H_ - -/* Configuration ids */ -#define TI_BOOT_CONFIG 1 -#define TI_ACTIVE_CONFIG 2 - -/* Vendor and product ids */ -#define TI_VENDOR_ID 0x0451 -#define IBM_VENDOR_ID 0x04b3 -#define TI_3410_PRODUCT_ID 0x3410 -#define IBM_4543_PRODUCT_ID 0x4543 -#define IBM_454B_PRODUCT_ID 0x454b -#define IBM_454C_PRODUCT_ID 0x454c -#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ -#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ -#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ -#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ -#define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */ -#define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */ - -/* Multi-Tech vendor and product ids */ -#define MTS_VENDOR_ID 0x06E0 -#define MTS_GSM_NO_FW_PRODUCT_ID 0xF108 -#define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109 -#define MTS_CDMA_PRODUCT_ID 0xF110 -#define MTS_GSM_PRODUCT_ID 0xF111 -#define MTS_EDGE_PRODUCT_ID 0xF112 -#define MTS_MT9234MU_PRODUCT_ID 0xF114 -#define MTS_MT9234ZBA_PRODUCT_ID 0xF115 -#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 - -/* Abbott Diabetics vendor and product ids */ -#define ABBOTT_VENDOR_ID 0x1a61 -#define ABBOTT_STEREO_PLUG_ID 0x3410 -#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID -#define ABBOTT_STRIP_PORT_ID 0x3420 - -/* Honeywell vendor and product IDs */ -#define HONEYWELL_VENDOR_ID 0x10ac -#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */ - -/* Moxa UPORT 11x0 vendor and product IDs */ -#define MXU1_VENDOR_ID 0x110a -#define MXU1_1110_PRODUCT_ID 0x1110 -#define MXU1_1130_PRODUCT_ID 0x1130 -#define MXU1_1131_PRODUCT_ID 0x1131 -#define MXU1_1150_PRODUCT_ID 0x1150 -#define MXU1_1151_PRODUCT_ID 0x1151 - -/* Commands */ -#define TI_GET_VERSION 0x01 -#define TI_GET_PORT_STATUS 0x02 -#define TI_GET_PORT_DEV_INFO 0x03 -#define TI_GET_CONFIG 0x04 -#define TI_SET_CONFIG 0x05 -#define TI_OPEN_PORT 0x06 -#define TI_CLOSE_PORT 0x07 -#define TI_START_PORT 0x08 -#define TI_STOP_PORT 0x09 -#define TI_TEST_PORT 0x0A -#define TI_PURGE_PORT 0x0B -#define TI_RESET_EXT_DEVICE 0x0C -#define TI_WRITE_DATA 0x80 -#define TI_READ_DATA 0x81 -#define TI_REQ_TYPE_CLASS 0x82 - -/* Module identifiers */ -#define TI_I2C_PORT 0x01 -#define TI_IEEE1284_PORT 0x02 -#define TI_UART1_PORT 0x03 -#define TI_UART2_PORT 0x04 -#define TI_RAM_PORT 0x05 - -/* Modem status */ -#define TI_MSR_DELTA_CTS 0x01 -#define TI_MSR_DELTA_DSR 0x02 -#define TI_MSR_DELTA_RI 0x04 -#define TI_MSR_DELTA_CD 0x08 -#define TI_MSR_CTS 0x10 -#define TI_MSR_DSR 0x20 -#define TI_MSR_RI 0x40 -#define TI_MSR_CD 0x80 -#define TI_MSR_DELTA_MASK 0x0F -#define TI_MSR_MASK 0xF0 - -/* Line status */ -#define TI_LSR_OVERRUN_ERROR 0x01 -#define TI_LSR_PARITY_ERROR 0x02 -#define TI_LSR_FRAMING_ERROR 0x04 -#define TI_LSR_BREAK 0x08 -#define TI_LSR_ERROR 0x0F -#define TI_LSR_RX_FULL 0x10 -#define TI_LSR_TX_EMPTY 0x20 - -/* Line control */ -#define TI_LCR_BREAK 0x40 - -/* Modem control */ -#define TI_MCR_LOOP 0x04 -#define TI_MCR_DTR 0x10 -#define TI_MCR_RTS 0x20 - -/* Mask settings */ -#define TI_UART_ENABLE_RTS_IN 0x0001 -#define TI_UART_DISABLE_RTS 0x0002 -#define TI_UART_ENABLE_PARITY_CHECKING 0x0008 -#define TI_UART_ENABLE_DSR_OUT 0x0010 -#define TI_UART_ENABLE_CTS_OUT 0x0020 -#define TI_UART_ENABLE_X_OUT 0x0040 -#define TI_UART_ENABLE_XA_OUT 0x0080 -#define TI_UART_ENABLE_X_IN 0x0100 -#define TI_UART_ENABLE_DTR_IN 0x0800 -#define TI_UART_DISABLE_DTR 0x1000 -#define TI_UART_ENABLE_MS_INTS 0x2000 -#define TI_UART_ENABLE_AUTO_START_DMA 0x4000 - -/* Parity */ -#define TI_UART_NO_PARITY 0x00 -#define TI_UART_ODD_PARITY 0x01 -#define TI_UART_EVEN_PARITY 0x02 -#define TI_UART_MARK_PARITY 0x03 -#define TI_UART_SPACE_PARITY 0x04 - -/* Stop bits */ -#define TI_UART_1_STOP_BITS 0x00 -#define TI_UART_1_5_STOP_BITS 0x01 -#define TI_UART_2_STOP_BITS 0x02 - -/* Bits per character */ -#define TI_UART_5_DATA_BITS 0x00 -#define TI_UART_6_DATA_BITS 0x01 -#define TI_UART_7_DATA_BITS 0x02 -#define TI_UART_8_DATA_BITS 0x03 - -/* 232/485 modes */ -#define TI_UART_232 0x00 -#define TI_UART_485_RECEIVER_DISABLED 0x01 -#define TI_UART_485_RECEIVER_ENABLED 0x02 - -/* Pipe transfer mode and timeout */ -#define TI_PIPE_MODE_CONTINOUS 0x01 -#define TI_PIPE_MODE_MASK 0x03 -#define TI_PIPE_TIMEOUT_MASK 0x7C -#define TI_PIPE_TIMEOUT_ENABLE 0x80 - -/* Config struct */ -struct ti_uart_config { - __u16 wBaudRate; - __u16 wFlags; - __u8 bDataBits; - __u8 bParity; - __u8 bStopBits; - char cXon; - char cXoff; - __u8 bUartMode; -} __packed; - -/* Get port status */ -struct ti_port_status { - __u8 bCmdCode; - __u8 bModuleId; - __u8 bErrorCode; - __u8 bMSR; - __u8 bLSR; -} __packed; - -/* Purge modes */ -#define TI_PURGE_OUTPUT 0x00 -#define TI_PURGE_INPUT 0x80 - -/* Read/Write data */ -#define TI_RW_DATA_ADDR_SFR 0x10 -#define TI_RW_DATA_ADDR_IDATA 0x20 -#define TI_RW_DATA_ADDR_XDATA 0x30 -#define TI_RW_DATA_ADDR_CODE 0x40 -#define TI_RW_DATA_ADDR_GPIO 0x50 -#define TI_RW_DATA_ADDR_I2C 0x60 -#define TI_RW_DATA_ADDR_FLASH 0x70 -#define TI_RW_DATA_ADDR_DSP 0x80 - -#define TI_RW_DATA_UNSPECIFIED 0x00 -#define TI_RW_DATA_BYTE 0x01 -#define TI_RW_DATA_WORD 0x02 -#define TI_RW_DATA_DOUBLE_WORD 0x04 - -struct ti_write_data_bytes { - __u8 bAddrType; - __u8 bDataType; - __u8 bDataCounter; - __be16 wBaseAddrHi; - __be16 wBaseAddrLo; - __u8 bData[0]; -} __packed; - -struct ti_read_data_request { - __u8 bAddrType; - __u8 bDataType; - __u8 bDataCounter; - __be16 wBaseAddrHi; - __be16 wBaseAddrLo; -} __packed; - -struct ti_read_data_bytes { - __u8 bCmdCode; - __u8 bModuleId; - __u8 bErrorCode; - __u8 bData[0]; -} __packed; - -/* Interrupt struct */ -struct ti_interrupt { - __u8 bICode; - __u8 bIInfo; -} __packed; - -/* Interrupt codes */ -#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) -#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) -#define TI_CODE_HARDWARE_ERROR 0xFF -#define TI_CODE_DATA_ERROR 0x03 -#define TI_CODE_MODEM_STATUS 0x04 - -/* Download firmware max packet size */ -#define TI_DOWNLOAD_MAX_PACKET_SIZE 64 - -/* Firmware image header */ -struct ti_firmware_header { - __le16 wLength; - __u8 bCheckSum; -} __packed; - -/* UART addresses */ -#define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */ -#define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */ -#define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */ -#define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */ - -#endif /* _TI_3410_5052_H_ */ -- cgit v1.2.3 From d8d841e8332779fae2b18420d39ef407ea3729da Mon Sep 17 00:00:00 2001 From: Mathieu OTHACEHE Date: Thu, 12 May 2016 10:48:36 +0200 Subject: USB: serial: ti_usb_3410_5052: use functions rather than macros Functions are preferable to macros resembling functions. Signed-off-by: Mathieu OTHACEHE [johan: drop inline keyword, move above calling function ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ti_usb_3410_5052.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 6002e8bfc9ac..07b4bf01061d 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -248,8 +248,6 @@ struct ti_interrupt { } __packed; /* Interrupt codes */ -#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) -#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) #define TI_CODE_HARDWARE_ERROR 0xFF #define TI_CODE_DATA_ERROR 0x03 #define TI_CODE_MODEM_STATUS 0x04 @@ -1168,6 +1166,15 @@ static void ti_break(struct tty_struct *tty, int break_state) dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status); } +static int ti_get_port_from_code(unsigned char code) +{ + return (code >> 4) - 3; +} + +static int ti_get_func_from_code(unsigned char code) +{ + return code & 0x0f; +} static void ti_interrupt_callback(struct urb *urb) { @@ -1209,8 +1216,8 @@ static void ti_interrupt_callback(struct urb *urb) goto exit; } - port_number = TI_GET_PORT_FROM_CODE(data[0]); - function = TI_GET_FUNC_FROM_CODE(data[0]); + port_number = ti_get_port_from_code(data[0]); + function = ti_get_func_from_code(data[0]); dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n", __func__, port_number, function, data[1]); -- cgit v1.2.3 From d6c4dc3bf4e934fae7002f296aaef4b578f7ca14 Mon Sep 17 00:00:00 2001 From: Muhammad Falak R Wani Date: Thu, 19 May 2016 19:34:36 +0530 Subject: USB: serial: cp210x: use kmemdup Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 96a70789b4c2..4d6a5c672a3d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -496,12 +496,10 @@ static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req, void *dmabuf; int result; - dmabuf = kmalloc(bufsize, GFP_KERNEL); + dmabuf = kmemdup(buf, bufsize, GFP_KERNEL); if (!dmabuf) return -ENOMEM; - memcpy(dmabuf, buf, bufsize); - result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), req, REQTYPE_HOST_TO_INTERFACE, 0, port_priv->bInterfaceNumber, dmabuf, bufsize, -- cgit v1.2.3 From 3c0415fa08548e3bc63ef741762664497ab187ed Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Mon, 6 Jun 2016 12:38:17 +0200 Subject: USB: serial: option: add support for Telit LE910 PID 0x1206 This patch adds support for 0x1206 PID of Telit LE910. Since the interfaces positions are the same than the ones for 0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d96d423d00e6..8e07536c233a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -273,6 +273,7 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 +#define TELIT_PRODUCT_LE910_USBCFG4 0x1206 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -1198,6 +1199,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ -- cgit v1.2.3 From 3161da970d38cd6ed2ba8cadec93874d1d06e11e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 14 Jul 2016 15:01:40 +0200 Subject: USB: serial: use variable for status This patch turns status in a variable read once from the URB. The long term plan is to deliver status to the callback. In addition it makes the code a bit more elegant. Signed-off-by: Oliver Neukum Signed-off-by: Johan Hovold --- drivers/usb/serial/generic.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index ae8c0365abd6..944de657a07a 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -350,6 +350,7 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; unsigned long flags; + int status = urb->status; int i; for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { @@ -360,22 +361,22 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i, urb->actual_length); - switch (urb->status) { + switch (status) { case 0: break; case -ENOENT: case -ECONNRESET: case -ESHUTDOWN: dev_dbg(&port->dev, "%s - urb stopped: %d\n", - __func__, urb->status); + __func__, status); return; case -EPIPE: dev_err(&port->dev, "%s - urb stopped: %d\n", - __func__, urb->status); + __func__, status); return; default: dev_dbg(&port->dev, "%s - nonzero urb status: %d\n", - __func__, urb->status); + __func__, status); goto resubmit; } @@ -399,6 +400,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; + int status = urb->status; int i; for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { @@ -410,22 +412,22 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) set_bit(i, &port->write_urbs_free); spin_unlock_irqrestore(&port->lock, flags); - switch (urb->status) { + switch (status) { case 0: break; case -ENOENT: case -ECONNRESET: case -ESHUTDOWN: dev_dbg(&port->dev, "%s - urb stopped: %d\n", - __func__, urb->status); + __func__, status); return; case -EPIPE: dev_err_console(port, "%s - urb stopped: %d\n", - __func__, urb->status); + __func__, status); return; default: dev_err_console(port, "%s - nonzero urb status: %d\n", - __func__, urb->status); + __func__, status); goto resubmit; } -- cgit v1.2.3