From aa1b13efb7cfa9f7bf4942c1e858463e335c9500 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 3 Mar 2011 05:40:51 -0800 Subject: xhci: Modify check for TT info. Commit d199c96d by Alan Stern ensured that low speed and full speed devices below a high speed hub without a transaction translator (TT) would never get enumerated. Simplify the check for a TT in the xHCI virtual device allocation to only check if the usb_device references a parent's TT. Make sure not to set the TT information on LS/FS devices directly connected to the roothub. The xHCI host doesn't really have a TT, and the host will throw an error when those virtual device TT fields are set for a device connected to the roothub. We need this check because the xHCI driver will shortly register two roothubs: a USB 2.0 roothub and a USB 3.0 roothub. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index e3e6410d7b5e..9688a58611d4 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -870,9 +870,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud dev->port = top_dev->portnum; xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); - /* Is this a LS/FS device under a HS hub? */ - if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) && - udev->tt) { + /* Is this a LS/FS device under an external HS hub? */ + if (udev->tt && udev->tt->hub->parent) { slot_ctx->tt_info = udev->tt->hub->slot_id; slot_ctx->tt_info |= udev->ttport << 8; if (udev->tt->multi) -- cgit v1.2.3