From a930d8bd94d8db7715d1af74299f710b1fb22fc8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 4 Jul 2018 10:09:58 -0300 Subject: usb: chipidea: Always build ULPI code Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen --- drivers/usb/chipidea/Kconfig | 9 +-------- drivers/usb/chipidea/Makefile | 3 +-- drivers/usb/chipidea/ci.h | 8 -------- drivers/usb/chipidea/ulpi.c | 3 +++ 4 files changed, 5 insertions(+), 18 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 785f0ed037f7..ee34e9046f7e 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -3,6 +3,7 @@ config USB_CHIPIDEA depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA select EXTCON select RESET_CONTROLLER + select USB_ULPI_BUS help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: @@ -38,12 +39,4 @@ config USB_CHIPIDEA_HOST help Say Y here to enable host controller functionality of the ChipIdea driver. - -config USB_CHIPIDEA_ULPI - bool "ChipIdea ULPI PHY support" - depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_CHIPIDEA - help - Say Y here if you have a ULPI PHY attached to your ChipIdea - controller. - endif diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index e3d5e728fa53..12df94f78f72 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -1,11 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o -ci_hdrc-y := core.o otg.o debug.o +ci_hdrc-y := core.o otg.o debug.o ulpi.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o -ci_hdrc-$(CONFIG_USB_CHIPIDEA_ULPI) += ulpi.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 0bf244d50544..6a2cc5cd0281 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -240,10 +240,8 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; -#ifdef CONFIG_USB_CHIPIDEA_ULPI struct ulpi *ulpi; struct ulpi_ops ulpi_ops; -#endif struct phy *phy; /* old usb_phy interface */ struct usb_phy *usb_phy; @@ -426,15 +424,9 @@ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) #endif } -#if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI) int ci_ulpi_init(struct ci_hdrc *ci); void ci_ulpi_exit(struct ci_hdrc *ci); int ci_ulpi_resume(struct ci_hdrc *ci); -#else -static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; } -static inline void ci_ulpi_exit(struct ci_hdrc *ci) { } -static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; } -#endif u32 hw_read_intr_enable(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c index 6da42dcd2888..dfec07e8ae1d 100644 --- a/drivers/usb/chipidea/ulpi.c +++ b/drivers/usb/chipidea/ulpi.c @@ -95,6 +95,9 @@ int ci_ulpi_resume(struct ci_hdrc *ci) { int cnt = 100000; + if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) + return 0; + while (cnt-- > 0) { if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) return 0; -- cgit v1.2.3