From 9f952e26295d977dbfc6fedeaf8c4f112c818d37 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 22 Apr 2020 16:09:51 -0400 Subject: USB: hub: Fix handling of connect changes during sleep Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") wasn't very well conceived. The problem it tried to fix was that if a connect-change event occurred while the system was asleep (such as a device disconnecting itself from the bus when it is suspended and then reconnecting when it resumes) requiring a reset-resume during the system wakeup transition, the hub port's change_bit entry would remain set afterward. This would cause the hub driver to believe another connect-change event had occurred after the reset-resume, which was wrong and would lead the driver to send unnecessary requests to the device (which could interfere with a firmware update). The commit tried to fix this by not setting the change_bit during the wakeup. But this was the wrong thing to do; it means that when a device is unplugged while the system is asleep, the hub driver doesn't realize anything has happened: The change_bit flag which would tell it to handle the disconnect event is clear. The commit needs to be reverted and the problem fixed in a different way. Fortunately an alternative solution was noted in the commit's Changelog: We can continue to set the change_bit entry in hub_activate() but then clear it when a reset-resume occurs. That way the the hub driver will see the change_bit when a device is disconnected but won't see it when the device is still present. That's what this patch does. Reported-and-tested-by: Peter Chen Signed-off-by: Alan Stern Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") Tested-by: Paul Zimmerman CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 54cd8ef795ec..83549f009ced 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1223,6 +1223,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) #ifdef CONFIG_PM udev->reset_resume = 1; #endif + /* Don't set the change_bits when the device + * was powered off. + */ + if (test_bit(port1, hub->power_bits)) + set_bit(port1, hub->change_bits); } else { /* The power session is gone; tell hub_wq */ @@ -3088,6 +3093,15 @@ static int check_port_resume_type(struct usb_device *udev, if (portchange & USB_PORT_STAT_C_ENABLE) usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); + + /* + * Whatever made this reset-resume necessary may have + * turned on the port1 bit in hub->change_bits. But after + * a successful reset-resume we want the bit to be clear; + * if it was on it would indicate that something happened + * following the reset-resume. + */ + clear_bit(port1, hub->change_bits); } return status; -- cgit v1.2.3