From 53dc25ada62ff418bbbffb6bd982ed923cd84021 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Mon, 12 Mar 2012 22:54:51 +0100 Subject: USB: ohci-nxp: Support for LPC32xx This patch adds support for the LPC32xx to ohci-nxp Signed-off-by: Roland Stigge Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-nxp.c | 142 +++++++++++++++++++++++++++++++++----------- 2 files changed, 109 insertions(+), 35 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index dba50deb7e9a..c1c550f2a517 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1050,7 +1050,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_at91_driver #endif -#ifdef CONFIG_ARCH_PNX4008 +#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX) #include "ohci-nxp.c" #define PLATFORM_DRIVER usb_hcd_nxp_driver #endif diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index a12c6b40472e..e7cc7b633214 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -3,6 +3,7 @@ * * Currently supported OHCI host devices: * - Philips PNX4008 + * - NXP LPC32xx * * Authors: Dmitry Chigirev * Vitaly Wool @@ -23,20 +24,24 @@ #include #include +#include #include #include #include #include -#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) +#define USB_CONFIG_BASE 0x31020000 +#define PWRMAN_BASE 0x40004000 + +#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64) /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) #define USB_HOST_NEED_CLK_EN (1 << 21) -#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4) -#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8) +#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) +#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) /* USB_OTG_CLK_CTRL bit defines */ #define AHB_M_CLOCK_ON (1 << 4) @@ -45,7 +50,7 @@ #define DEV_CLOCK_ON (1 << 1) #define HOST_CLOCK_ON (1 << 0) -#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110) +#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ #define TRANSPARENT_I2C_EN (1 << 7) @@ -99,6 +104,15 @@ #define ISP1301_I2C_INTERRUPT_RISING 0xE #define ISP1301_I2C_REG_CLEAR_ADDR 1 +/* On LPC32xx, those are undefined */ +#ifndef start_int_set_falling_edge +#define start_int_set_falling_edge(irq) +#define start_int_set_rising_edge(irq) +#define start_int_ack(irq) +#define start_int_mask(irq) +#define start_int_umask(irq) +#endif + static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; @@ -144,7 +158,7 @@ static void i2c_write(u8 buf, u8 subaddr) i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2); } -static void isp1301_configure(void) +static void isp1301_configure_pnx4008(void) { /* PNX4008 only supports DAT_SE0 USB mode */ /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ @@ -167,7 +181,63 @@ static void isp1301_configure(void) ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR); i2c_write(0xFF, ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR); +} +static void isp1301_configure_lpc32xx(void) +{ + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + ~MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, + (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + (OTG1_DM_PULLUP | OTG1_DP_PULLUP)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Enable usb_need_clk clock after transceiver is initialized */ + __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + + printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); + printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x02)); + printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x14)); +} + +static void isp1301_configure(void) +{ + if (machine_is_pnx4008()) + isp1301_configure_pnx4008(); + else + isp1301_configure_lpc32xx(); } static inline void isp1301_vbus_on(void) @@ -258,39 +328,43 @@ static const struct hc_driver ohci_nxp_hc_driver = { static void nxp_set_usb_bits(void) { - start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); - start_int_ack(SE_USB_OTG_ATX_INT_N); - start_int_umask(SE_USB_OTG_ATX_INT_N); - - start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); - start_int_ack(SE_USB_OTG_TIMER_INT); - start_int_umask(SE_USB_OTG_TIMER_INT); - - start_int_set_rising_edge(SE_USB_I2C_INT); - start_int_ack(SE_USB_I2C_INT); - start_int_umask(SE_USB_I2C_INT); - - start_int_set_rising_edge(SE_USB_INT); - start_int_ack(SE_USB_INT); - start_int_umask(SE_USB_INT); - - start_int_set_rising_edge(SE_USB_NEED_CLK_INT); - start_int_ack(SE_USB_NEED_CLK_INT); - start_int_umask(SE_USB_NEED_CLK_INT); - - start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); - start_int_ack(SE_USB_AHB_NEED_CLK_INT); - start_int_umask(SE_USB_AHB_NEED_CLK_INT); + if (machine_is_pnx4008()) { + start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); + start_int_ack(SE_USB_OTG_ATX_INT_N); + start_int_umask(SE_USB_OTG_ATX_INT_N); + + start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); + start_int_ack(SE_USB_OTG_TIMER_INT); + start_int_umask(SE_USB_OTG_TIMER_INT); + + start_int_set_rising_edge(SE_USB_I2C_INT); + start_int_ack(SE_USB_I2C_INT); + start_int_umask(SE_USB_I2C_INT); + + start_int_set_rising_edge(SE_USB_INT); + start_int_ack(SE_USB_INT); + start_int_umask(SE_USB_INT); + + start_int_set_rising_edge(SE_USB_NEED_CLK_INT); + start_int_ack(SE_USB_NEED_CLK_INT); + start_int_umask(SE_USB_NEED_CLK_INT); + + start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); + start_int_ack(SE_USB_AHB_NEED_CLK_INT); + start_int_umask(SE_USB_AHB_NEED_CLK_INT); + } } static void nxp_unset_usb_bits(void) { - start_int_mask(SE_USB_OTG_ATX_INT_N); - start_int_mask(SE_USB_OTG_TIMER_INT); - start_int_mask(SE_USB_I2C_INT); - start_int_mask(SE_USB_INT); - start_int_mask(SE_USB_NEED_CLK_INT); - start_int_mask(SE_USB_AHB_NEED_CLK_INT); + if (machine_is_pnx4008()) { + start_int_mask(SE_USB_OTG_ATX_INT_N); + start_int_mask(SE_USB_OTG_TIMER_INT); + start_int_mask(SE_USB_I2C_INT); + start_int_mask(SE_USB_INT); + start_int_mask(SE_USB_NEED_CLK_INT); + start_int_mask(SE_USB_AHB_NEED_CLK_INT); + } } static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) -- cgit v1.2.3