From 43febb27dcdaf9a15e2f362a6d09b0f191c4dcea Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 4 Mar 2013 16:52:38 -0600 Subject: usb: gadget: composite: fix kernel-doc warnings A few trivial fixes for composite driver: Warning(include/linux/usb/composite.h:165): No description found for parameter 'fs_descriptors' Warning(include/linux/usb/composite.h:165): Excess struct/union/enum/typedef member 'descriptors' description in 'usb_function' Warning(include/linux/usb/composite.h:321): No description found for parameter 'gadget_driver' Warning(drivers/usb/gadget/composite.c:1777): Excess function parameter 'bind' description in 'usb_composite_probe' Cc: Greg Kroah-Hartman Cc: Jiri Kosina Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 7c821de8ce3d..c0d62b278610 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1757,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = { /** * usb_composite_probe() - register a composite driver * @driver: the driver to register - * @bind: the callback used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. + * * Context: single threaded during gadget setup * * This function is used to register drivers using the composite driver -- cgit v1.2.3 From 341a71c790529140fc5f8833f893324f6b5261cc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 5 Mar 2013 13:18:49 +0200 Subject: usb: musb: remove all 'select' from Kconfig those are quite unnecessary, the only thing we need to be careful about is USB_OTG_UTILS which get properly selected by PHY drivers. For now, MUSB will select only USB_OTG_UTILS until we add stubs for the cases when PHY layer isn't enabled. Signed-off-by: Felipe Balbi --- drivers/usb/musb/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 2f7d84af6650..05e51432dd2f 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -7,9 +7,6 @@ config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' depends on USB && USB_GADGET - select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX) - select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS help Say Y here if your system has a dual role high speed USB @@ -49,8 +46,6 @@ config USB_MUSB_TUSB6010 config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" depends on ARCH_OMAP2PLUS - select TWL4030_USB if MACH_OMAP_3430SDP - select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA config USB_MUSB_AM35X tristate "AM35x" -- cgit v1.2.3 From e574d5708156585ee506b7f914ed4a55a319d294 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 5 Mar 2013 13:25:36 +0200 Subject: usb: musb: fix compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When running 100 randconfig iterations, I found the following warning: drivers/usb/musb/musb_core.c: In function ‘musb_init_controller’: drivers/usb/musb/musb_core.c:1981:1: warning: label ‘fail5’ defined \ but not used [-Wunused-label] this patch fixes it by removing the unnecessary ifdef CONFIG_SYSFS. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 60b41cc28da4..13382e053d59 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1968,11 +1968,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail4; -#ifdef CONFIG_SYSFS status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); if (status) goto fail5; -#endif pm_runtime_put(musb->controller); -- cgit v1.2.3 From f8c4b0e73b636fe06e8283f29905c2e60ed66fa1 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 5 Mar 2013 13:04:23 +0200 Subject: usb: musb: omap2430: fix omap_musb_mailbox glue check again Commit 80ab72e1 (usb: musb: omap2430: fix the readiness check in omap_musb_mailbox) made the check incorrect, as we will lose the glue/link status during the normal built-in probe order (twl4030_usb is probed after musb omap2430, but before musb core is ready). As a result, if you boot with USB cable on and load g_ether, the connection does not work as the code thinks the cable is off and the phy gets powered down immediately. This is a major regression in 3.9-rc1. So the proper check should be: exit if _glue is NULL, but if it's initialized we memorize the status, and then check if the musb core is ready. Signed-off-by: Aaro Koskinen Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 1762354fe793..2a39c110d3d5 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -237,9 +237,13 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; - if (glue && glue_to_musb(glue)) { - glue->status = status; - } else { + if (!glue) { + pr_err("%s: musb core is not yet initialized\n", __func__); + return; + } + glue->status = status; + + if (!glue_to_musb(glue)) { pr_err("%s: musb core is not yet ready\n", __func__); return; } -- cgit v1.2.3 From 4b58ed11c681c0779c330f1aa5307b594943b683 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 5 Mar 2013 13:04:24 +0200 Subject: usb: musb: omap2430: fix sparse warning Fix the following sparse warning: drivers/usb/musb/omap2430.c:54:33: warning: symbol '_glue' was not \ declared. Should it be static? Signed-off-by: Aaro Koskinen Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2a39c110d3d5..1a42a458f2c4 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -51,7 +51,7 @@ struct omap2430_glue { }; #define glue_to_musb(g) platform_get_drvdata(g->musb) -struct omap2430_glue *_glue; +static struct omap2430_glue *_glue; static struct timer_list musb_idle_timer; -- cgit v1.2.3 From c390b0363d6cc201db93de69b5e88f482322d821 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 8 Mar 2013 09:42:50 +0200 Subject: usb: dwc3: ep0: fix sparc64 build drivers/usb/dwc3/ep0.c: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:905: error: `typeof' applied to a bit-field Looks like a gcc-3.4.5/sparc64 bug. Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index d7da073a23fe..1d139ca05ef1 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -891,7 +891,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, DWC3_TRBCTL_CONTROL_DATA); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { - u32 transfer_size; + u32 transfer_size; + u32 maxpacket; ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); @@ -902,8 +903,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE); - transfer_size = roundup(req->request.length, - (u32) dep->endpoint.maxpacket); + maxpacket = dep->endpoint.maxpacket; + transfer_size = roundup(req->request.length, maxpacket); dwc->ep0_bounced = true; -- cgit v1.2.3 From 66e4afc77f76653460d7eb31ec793506ada1ad33 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 11 Mar 2013 12:40:31 +0200 Subject: usb: gadget: pxa25x: fix disconnect reporting when commit 6166c24 (usb: gadget: pxa25x_udc: convert to udc_start/udc_stop) converted this driver to udc_start/udc_stop, it failed to consider the fact that stop_activity() is called from disconnect interrupt. Fix the problem so that gadget drivers know about proper disconnect sequences. Signed-off-by: Felipe Balbi --- drivers/usb/gadget/pxa25x_udc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9aa9dd5168d8..d0f37484b6b0 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -1303,6 +1303,10 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) } del_timer_sync(&dev->timer); + /* report disconnect; the driver is already quiesced */ + if (driver) + driver->disconnect(&dev->gadget); + /* re-init driver-visible data structures */ udc_reinit(dev); } -- cgit v1.2.3