From 45f750c16cae3625014c14c77bd9005eda975d35 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 14 Dec 2018 10:54:43 +0200 Subject: xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 94aca1b5ac8a..01b5818a4be5 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1507,7 +1507,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd) portsc_buf[port_index] = 0; /* Bail out if a USB3 port has a new device in link training */ - if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) { + if ((hcd->speed >= HCD_USB3) && + (t1 & PORT_PLS_MASK) == XDEV_POLLING) { bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); -- cgit v1.2.3