From 347052e3bf1b62a25c11f7a673acfbaf554d67a1 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Tue, 26 May 2020 22:29:43 +0200 Subject: usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs dwc3_meson_g12a_usb2_init_phy() crashes with NULL pointer on an SM1 board (which uses the same USB setup as G12A) dereference as reported by the Kernel CI bot. This is because of the following call flow: dwc3_meson_g12a_probe priv->drvdata->setup_regmaps dwc3_meson_g12a_setup_regmaps priv->usb2_ports is still 0 so priv->u2p_regmap[i] will be NULL dwc3_meson_g12a_get_phys initializes priv->usb2_ports priv->drvdata->usb_init dwc3_meson_g12a_usb_init dwc3_meson_g12a_usb_init_glue dwc3_meson_g12a_usb2_init priv->drvdata->usb2_init_phy dwc3_meson_g12a_usb2_init_phy dereferences priv->u2p_regmap[i] Call priv->drvdata->setup_regmaps only after dwc3_meson_g12a_get_phys so priv->usb2_ports is initialized and the regmaps will be set up correctly. This fixes the NULL dereference later on. Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately") Reported-by: "kernelci.org bot" Acked-by: Felipe Balbi Acked-by: Neil Armstrong Signed-off-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20200526202943.715220-3-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index ce5388338389..1f7f4d88ed9d 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -708,11 +708,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) return PTR_ERR(base); priv->drvdata = of_device_get_match_data(&pdev->dev); - priv->dev = dev; - ret = priv->drvdata->setup_regmaps(priv, base); - if (ret) - return ret; priv->vbus = devm_regulator_get_optional(dev, "vbus"); if (IS_ERR(priv->vbus)) { @@ -749,6 +745,10 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (ret) goto err_disable_clks; + ret = priv->drvdata->setup_regmaps(priv, base); + if (ret) + return ret; + if (priv->vbus) { ret = regulator_enable(priv->vbus); if (ret) -- cgit v1.2.3