From ce553bd103c161df2676ff201746bff8ca512715 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 16 May 2017 11:48:01 -0400 Subject: USB: ene_usb6250: implement REQUEST SENSE In the ene_usb6250 sub-driver for usb-storage, there is no support for the REQUEST SENSE command. This command is issued whenever a failure occurs, and without it the driver has no way to tell the SCSI core what the reason for the failure was. This patch adds a do_scsi_request_sense() routine to the driver. The new routine reports the error code stored by the previous command. Signed-off-by: Alan Stern Reported-and-tested-by: Andreas Hartmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/ene_ub6250.c | 41 ++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) (limited to 'drivers/usb/storage') diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 107018447551..44aca29ad6cc 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -95,12 +95,12 @@ static struct us_unusual_dev ene_ub6250_unusual_dev_list[] = { #define REG_HW_TRAP1 0xFF89 /* SRB Status */ -#define SS_SUCCESS 0x00 /* No Sense */ -#define SS_NOT_READY 0x02 -#define SS_MEDIUM_ERR 0x03 -#define SS_HW_ERR 0x04 -#define SS_ILLEGAL_REQUEST 0x05 -#define SS_UNIT_ATTENTION 0x06 +#define SS_SUCCESS 0x000000 /* No Sense */ +#define SS_NOT_READY 0x023A00 /* Medium not present */ +#define SS_MEDIUM_ERR 0x031100 /* Unrecovered read error */ +#define SS_HW_ERR 0x040800 /* Communication failure */ +#define SS_ILLEGAL_REQUEST 0x052000 /* Invalid command */ +#define SS_UNIT_ATTENTION 0x062900 /* Reset occurred */ /* ENE Load FW Pattern */ #define SD_INIT1_PATTERN 1 @@ -577,6 +577,22 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) return USB_STOR_TRANSPORT_GOOD; } +static int do_scsi_request_sense(struct us_data *us, struct scsi_cmnd *srb) +{ + struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; + unsigned char buf[18]; + + memset(buf, 0, 18); + buf[0] = 0x70; /* Current error */ + buf[2] = info->SrbStatus >> 16; /* Sense key */ + buf[7] = 10; /* Additional length */ + buf[12] = info->SrbStatus >> 8; /* ASC */ + buf[13] = info->SrbStatus; /* ASCQ */ + + usb_stor_set_xfer_buf(buf, sizeof(buf), srb); + return USB_STOR_TRANSPORT_GOOD; +} + static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb) { struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; @@ -2212,11 +2228,13 @@ static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) int result; struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra; - info->SrbStatus = SS_SUCCESS; switch (srb->cmnd[0]) { case TEST_UNIT_READY: result = sd_scsi_test_unit_ready(us, srb); break; /* 0x00 */ + case REQUEST_SENSE: + result = do_scsi_request_sense(us, srb); + break; /* 0x03 */ case INQUIRY: result = sd_scsi_inquiry(us, srb); break; /* 0x12 */ @@ -2242,6 +2260,8 @@ static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) result = USB_STOR_TRANSPORT_FAILED; break; } + if (result == USB_STOR_TRANSPORT_GOOD) + info->SrbStatus = SS_SUCCESS; return result; } @@ -2252,11 +2272,14 @@ static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) { int result; struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra; - info->SrbStatus = SS_SUCCESS; + switch (srb->cmnd[0]) { case TEST_UNIT_READY: result = ms_scsi_test_unit_ready(us, srb); break; /* 0x00 */ + case REQUEST_SENSE: + result = do_scsi_request_sense(us, srb); + break; /* 0x03 */ case INQUIRY: result = ms_scsi_inquiry(us, srb); break; /* 0x12 */ @@ -2277,6 +2300,8 @@ static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb) result = USB_STOR_TRANSPORT_FAILED; break; } + if (result == USB_STOR_TRANSPORT_GOOD) + info->SrbStatus = SS_SUCCESS; return result; } -- cgit v1.2.3