From ea534e0b404762894ac55ee416c0ac9f5cd5045a Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Wed, 25 Jan 2017 23:40:40 +0300 Subject: USB: serial: add uPD78F0730 USB to Serial Adaptor Driver The adaptor can be found on development boards for 78k, RL78 and V850 microcontrollers produced by Renesas Electronics Corporation. This is not a full-featured USB to serial converter, however it allows basic communication and simple control which is enough for programming of on-board flash and debugging through a debug monitor. uPD78F0730 is a USB-enabled microcontroller with USB-to-UART conversion implemented in firmware. This chip is also present in some debugging adaptors which use it for USB-to-SPI conversion as well. The present driver doesn't cover SPI, only USB-to-UART conversion is supported. Signed-off-by: Maksim Salau Signed-off-by: Johan Hovold --- drivers/usb/serial/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb/serial/Makefile') diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 9e43b7b002eb..5a21a82390e1 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o +obj-$(CONFIG_USB_SERIAL_UPD78F0730) += upd78f0730.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o -- cgit v1.2.3