From 725bf9dcafe16aa69c8ab34c63ba36c6eb4492f2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 2 Jun 2013 01:50:25 +0400 Subject: phy-rcar-usb: correct base address The memory region that is used by the driver overlaps EHCI and OHCI register regions for absolutely no reason now -- fix it by adding offset of 0x800 to the base address, changing the register #define's accordingly. This has extra positive effect that we now can use devm_ioremap_resource()... Note that the driver and the SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov Acked-by: Kuninori Morimoto Acked-by: Felipe Balbi Signed-off-by: Simon Horman --- drivers/usb/phy/phy-rcar-usb.c | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-) (limited to 'drivers/usb/phy') diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c index 4893dbde4ee1..d636cc742e8f 100644 --- a/drivers/usb/phy/phy-rcar-usb.c +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -16,13 +16,13 @@ #include #include -/* USBH common register */ -#define USBPCTRL0 0x0800 -#define USBPCTRL1 0x0804 -#define USBST 0x0808 -#define USBEH0 0x080C -#define USBOH0 0x081C -#define USBCTL0 0x0858 +/* REGS block */ +#define USBPCTRL0 0x00 +#define USBPCTRL1 0x04 +#define USBST 0x08 +#define USBEH0 0x0C +#define USBOH0 0x1C +#define USBCTL0 0x58 /* USBPCTRL1 */ #define PHY_RST (1 << 2) @@ -139,17 +139,9 @@ static int rcar_usb_phy_probe(struct platform_device *pdev) return -EINVAL; } - /* - * CAUTION - * - * Because this phy address is also mapped under OHCI/EHCI address area, - * this driver can't use devm_request_and_ioremap(dev, res) here - */ - reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - if (!reg0) { - dev_err(dev, "ioremap error\n"); - return -ENOMEM; - } + reg0 = devm_ioremap_resource(dev, res0); + if (IS_ERR(reg0)) + return PTR_ERR(reg0); priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) { -- cgit v1.2.3