From 797b0ca5e6283b4cc0bdeeb0e5915f21522ba85f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 10 Nov 2011 16:02:13 -0800 Subject: xhci: Add roothub code to set U1/U2 timeouts. USB 3.0 hubs can be put into a mode where the hub can automatically request that the link go into a deeper link power state after the link has been idle for a specified amount of time. Each of the new USB 3.0 link states (U1 and U2) have their own timeout that can be programmed per port. Change the xHCI roothub emulation code to handle the request to set the U1 and U2 timeouts. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-hub.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/usb/host/xhci-hub.c') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 89850a82d51b..2732ef660c5c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -475,6 +475,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; + u16 timeout = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -623,6 +624,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, link_state = (wIndex & 0xff00) >> 3; if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) wake_mask = wIndex & 0xff00; + /* The MSB of wIndex is the U1/U2 timeout */ + timeout = (wIndex & 0xff00) >> 8; wIndex &= 0xff; if (!wIndex || wIndex > max_ports) goto error; @@ -747,6 +750,22 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); break; + case USB_PORT_FEAT_U1_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U1_TIMEOUT_MASK; + temp |= PORT_U1_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; + case USB_PORT_FEAT_U2_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U2_TIMEOUT_MASK; + temp |= PORT_U2_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; default: goto error; } -- cgit v1.2.3