From 4c9715de52b9b6256bf1e9510917111a47b0c176 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 15 Jun 2010 12:34:23 +0200 Subject: USB: ehci-mxc: bail out on transceiver problems The old code registered the hcd even if there were no transceivers detected, leading to oopses like this if we try to probe a non-existant ULPI: [ 2.730000] mxc-ehci mxc-ehci.0: unable to init transceiver [ 2.740000] timeout polling for ULPI device [ 2.740000] timeout polling for ULPI device [ 2.750000] mxc-ehci mxc-ehci.0: unable to enable vbus on transceiver [ 2.750000] mxc-ehci mxc-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.760000] mxc-ehci mxc-ehci.0: new USB bus registered, assigned bus number 2 [ 2.770000] Unhandled fault: external abort on non-linefetch (0x808) at 0xc4876184 [ 2.770000] Internal error: : 808 [#1] PREEMPT [ 2.770000] last sysfs file: [ 2.770000] Modules linked in: [ 2.770000] CPU: 0 Not tainted (2.6.33.5 #5) [ 2.770000] PC is at ehci_hub_control+0x4d4/0x8f8 [ 2.770000] LR is at ehci_mxc_setup+0xbc/0xdc [ 2.770000] pc : [] lr : [] psr: 00000093 [ 2.770000] sp : c3815e40 ip : 00000001 fp : 60000013 [ 2.770000] r10: c4876184 r9 : 00000000 r8 : c3814000 [ 2.770000] r7 : c391d2cc r6 : 00000001 r5 : 00000001 r4 : 00000000 [ 2.770000] r3 : 80000000 r2 : 00000007 r1 : 80000000 r0 : c4876184 [ 2.770000] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.770000] Control: 0005317f Table: a0004000 DAC: 00000017 [ 2.770000] Process swapper (pid: 1, stack limit = 0xc3814270) ... Signed-off-by: Wolfram Sang Cc: Sascha Hauer Cc: stable Acked-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host/ehci-mxc.c') diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 544ccfd7056e..bd4027745aa7 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) /* Initialize the transceiver */ if (pdata->otg) { pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET; - if (otg_init(pdata->otg) != 0) - dev_err(dev, "unable to init transceiver\n"); - else if (otg_set_vbus(pdata->otg, 1) != 0) + ret = otg_init(pdata->otg); + if (ret) { + dev_err(dev, "unable to init transceiver, probably missing\n"); + ret = -ENODEV; + goto err_add; + } + ret = otg_set_vbus(pdata->otg, 1); + if (ret) { dev_err(dev, "unable to enable vbus on transceiver\n"); + goto err_add; + } } priv->hcd = hcd; -- cgit v1.2.3