From 00b42170c86f90ac9dea83a7dfcd3f0c38098fe2 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 17 Jan 2018 13:22:49 -0800 Subject: usb: dwc3: Undo PHY init if soft reset fails In this function, we init the USB2 and USB3 PHYs, but if soft reset times out, we don't unwind this. Noticed by inspection. Signed-off-by: Brian Norris Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb/dwc3/core.c') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ade2ab00d37a..bc2467f0e6a7 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -234,6 +234,9 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) udelay(1); } while (--retries); + phy_exit(dwc->usb3_generic_phy); + phy_exit(dwc->usb2_generic_phy); + return -ETIMEDOUT; } -- cgit v1.2.3 From c4a5153e87fdf6805f63ff57556260e2554155a5 Mon Sep 17 00:00:00 2001 From: Manu Gautam Date: Thu, 18 Jan 2018 16:54:30 +0530 Subject: usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") updated suspend/resume routines to not power_off and reinit PHYs/core for host mode. It broke platforms that rely on DWC3 core to power_off PHYs to enter low power state on system suspend. Perform dwc3_core_exit/init only during host mode system_suspend/ resume to addresses power regression from above mentioned patch and also allow USB session to stay connected across runtime_suspend/resume in host mode. While at it also replace existing checks for HOST only dr_mode with current_dr_role to have similar core driver behavior for both Host-only and DRD+Host configurations. Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume") Reviewed-by: Roger Quadros Signed-off-by: Manu Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 36 ++++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 14 deletions(-) (limited to 'drivers/usb/dwc3/core.c') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index bc2467f0e6a7..59511f2cd3ac 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); reg |= DWC3_GCTL_PRTCAPDIR(mode); dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + dwc->current_dr_role = mode; } static void __dwc3_set_mode(struct work_struct *work) @@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_struct *work) dwc3_set_prtcap(dwc, dwc->desired_dr_role); - dwc->current_dr_role = dwc->desired_dr_role; - spin_unlock_irqrestore(&dwc->lock, flags); switch (dwc->desired_dr_role) { @@ -219,7 +219,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -919,7 +919,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); if (dwc->usb2_phy) @@ -935,7 +934,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST: - dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); if (dwc->usb2_phy) @@ -1287,7 +1285,7 @@ static int dwc3_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int dwc3_suspend_common(struct dwc3 *dwc) +static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; @@ -1299,6 +1297,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: + /* do nothing during host runtime_suspend */ + if (!PMSG_IS_AUTO(msg)) + dwc3_core_exit(dwc); + break; default: /* do nothing */ break; @@ -1307,7 +1309,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc) return 0; } -static int dwc3_resume_common(struct dwc3 *dwc) +static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; int ret; @@ -1323,6 +1325,13 @@ static int dwc3_resume_common(struct dwc3 *dwc) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: + /* nothing to do on host runtime_resume */ + if (!PMSG_IS_AUTO(msg)) { + ret = dwc3_core_init(dwc); + if (ret) + return ret; + } + break; default: /* do nothing */ break; @@ -1334,12 +1343,11 @@ static int dwc3_resume_common(struct dwc3 *dwc) static int dwc3_runtime_checks(struct dwc3 *dwc) { switch (dwc->current_dr_role) { - case USB_DR_MODE_PERIPHERAL: - case USB_DR_MODE_OTG: + case DWC3_GCTL_PRTCAP_DEVICE: if (dwc->connected) return -EBUSY; break; - case USB_DR_MODE_HOST: + case DWC3_GCTL_PRTCAP_HOST: default: /* do nothing */ break; @@ -1356,7 +1364,7 @@ static int dwc3_runtime_suspend(struct device *dev) if (dwc3_runtime_checks(dwc)) return -EBUSY; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND); if (ret) return ret; @@ -1372,7 +1380,7 @@ static int dwc3_runtime_resume(struct device *dev) device_init_wakeup(dev, false); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME); if (ret) return ret; @@ -1419,7 +1427,7 @@ static int dwc3_suspend(struct device *dev) struct dwc3 *dwc = dev_get_drvdata(dev); int ret; - ret = dwc3_suspend_common(dwc); + ret = dwc3_suspend_common(dwc, PMSG_SUSPEND); if (ret) return ret; @@ -1435,7 +1443,7 @@ static int dwc3_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - ret = dwc3_resume_common(dwc); + ret = dwc3_resume_common(dwc, PMSG_RESUME); if (ret) return ret; -- cgit v1.2.3 From 98112041bcca164676367e261c8c1073ef70cb51 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 12 Feb 2018 15:30:08 +0200 Subject: usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init() must be doene before dwc3_core_get_phy(). commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") broke this. The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should be called only once during the life cycle of the driver. However, as dwc3_core_init() is called during system suspend/resume it will result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init() which is wrong. Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup() into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that dwc3_core_ulpi_init() is called only once from dwc3_core_init(). Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from dwc3_core_init(). Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") Cc: linux-stable # >= v4.13 Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++++++++++++----------- drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 41 insertions(+), 11 deletions(-) (limited to 'drivers/usb/dwc3/core.c') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 59511f2cd3ac..f1d838a4acd6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -486,6 +486,22 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } +static int dwc3_core_ulpi_init(struct dwc3 *dwc) +{ + int intf; + int ret = 0; + + intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3); + + if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI || + (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI && + dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "ulpi", 4))) + ret = dwc3_ulpi_init(dwc); + + return ret; +} + /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure @@ -497,7 +513,6 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_phy_setup(struct dwc3 *dwc) { u32 reg; - int ret; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); @@ -568,9 +583,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* FALLTHROUGH */ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - ret = dwc3_ulpi_init(dwc); - if (ret) - return ret; /* FALLTHROUGH */ default: break; @@ -727,6 +739,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) } static int dwc3_core_get_phy(struct dwc3 *dwc); +static int dwc3_core_ulpi_init(struct dwc3 *dwc); /** * dwc3_core_init - Low-level initialization of DWC3 Core @@ -758,17 +771,27 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; - ret = dwc3_core_soft_reset(dwc); - if (ret) - goto err0; + if (!dwc->ulpi_ready) { + ret = dwc3_core_ulpi_init(dwc); + if (ret) + goto err0; + dwc->ulpi_ready = true; + } - ret = dwc3_phy_setup(dwc); + if (!dwc->phys_ready) { + ret = dwc3_core_get_phy(dwc); + if (ret) + goto err0a; + dwc->phys_ready = true; + } + + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0; + goto err0a; dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -841,6 +864,9 @@ err1: phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); +err0a: + dwc3_ulpi_exit(dwc); + err0: return ret; } @@ -1235,7 +1261,6 @@ err4: err3: dwc3_free_event_buffers(dwc); - dwc3_ulpi_exit(dwc); err2: pm_runtime_allow(&pdev->dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 185b9603fd98..860d2bc184d1 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -797,7 +797,9 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface + * @ulpi_ready: flag to indicate that ULPI is initialized * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. * @u1sel: parameter from Set SEL request. @@ -895,7 +897,10 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + bool phys_ready; + struct ulpi *ulpi; + bool ulpi_ready; void __iomem *regs; size_t regs_size; -- cgit v1.2.3