From 481f2d4f89f87a0baa26147f323380e31cfa7c44 Mon Sep 17 00:00:00 2001 From: Julius Werner Date: Tue, 30 Jul 2013 19:51:20 -0700 Subject: usb: core: don't try to reset_device() a port that got just disconnected The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4a8a1d68002c..558313de4911 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4798,7 +4798,8 @@ static void hub_events(void) hub->ports[i - 1]->child; dev_dbg(hub_dev, "warm reset port %d\n", i); - if (!udev) { + if (!udev || !(portstatus & + USB_PORT_STAT_CONNECTION)) { status = hub_port_reset(hub, i, NULL, HUB_BH_RESET_TIME, true); @@ -4808,8 +4809,8 @@ static void hub_events(void) usb_lock_device(udev); status = usb_reset_device(udev); usb_unlock_device(udev); + connect_change = 0; } - connect_change = 0; } if (connect_change) -- cgit v1.2.3 From 304ab4ab079a8ed03ce39f1d274964a532db036b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 Aug 2013 11:01:46 +0200 Subject: usb: add two quirky touchscreen These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index a63598895077..5b44cd47da5b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -78,6 +78,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04d8, 0x000c), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* CarrolTouch 4000U */ + { USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* CarrolTouch 4500U */ + { USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ { USB_DEVICE(0x04e8, 0x6601), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, -- cgit v1.2.3 From aa5ceae24bf8dff1d6fe87c6c4b08e69c6d33550 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 30 Jul 2013 15:39:02 -0400 Subject: USB: handle LPM errors during device suspend correctly The hub driver's usb_port_suspend() routine doesn't handle errors related to Link Power Management properly. It always returns failure, it doesn't try to clean up the wakeup setting, (in the case of system sleep) it doesn't try to go ahead with the port suspend regardless, and it doesn't try to apply the new power-off mechanism. This patch fixes these problems. Note: Sarah fixed this patch to apply against 3.11, since the original commit (4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors during device suspend correctly") called usb_disable_remote_wakeup, which won't be added until 3.12. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections.". There will be merge conflicts, since LTM wasn't added until 3.6. Signed-off-by: Alan Stern Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 71 +++++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 33 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 558313de4911..8287953e066c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2918,7 +2918,6 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) { struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); struct usb_port *port_dev = hub->ports[udev->portnum - 1]; - enum pm_qos_flags_status pm_qos_stat; int port1 = udev->portnum; int status; bool really_suspend = true; @@ -2956,7 +2955,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) status); /* bail if autosuspend is requested */ if (PMSG_IS_AUTO(msg)) - return status; + goto err_wakeup; } } @@ -2965,14 +2964,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) usb_set_usb2_hardware_lpm(udev, 0); if (usb_disable_ltm(udev)) { - dev_err(&udev->dev, "%s Failed to disable LTM before suspend\n.", - __func__); - return -ENOMEM; + dev_err(&udev->dev, "Failed to disable LTM before suspend\n."); + status = -ENOMEM; + if (PMSG_IS_AUTO(msg)) + goto err_ltm; } if (usb_unlocked_disable_lpm(udev)) { - dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.", - __func__); - return -ENOMEM; + dev_err(&udev->dev, "Failed to disable LPM before suspend\n."); + status = -ENOMEM; + if (PMSG_IS_AUTO(msg)) + goto err_lpm3; } /* see 7.1.7.6 */ @@ -3000,28 +3001,31 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) if (status) { dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); - /* paranoia: "should not happen" */ - if (udev->do_remote_wakeup) { - if (!hub_is_superspeed(hub->hdev)) { - (void) usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - USB_REQ_CLEAR_FEATURE, - USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - } else - (void) usb_disable_function_remotewakeup(udev); - - } + /* Try to enable USB3 LPM and LTM again */ + usb_unlocked_enable_lpm(udev); + err_lpm3: + usb_enable_ltm(udev); + err_ltm: /* Try to enable USB2 hardware LPM again */ if (udev->usb2_hw_lpm_capable == 1) usb_set_usb2_hardware_lpm(udev, 1); - /* Try to enable USB3 LTM and LPM again */ - usb_enable_ltm(udev); - usb_unlocked_enable_lpm(udev); + if (udev->do_remote_wakeup) { + if (udev->speed < USB_SPEED_SUPER) + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); + else + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_CLEAR_FEATURE, + USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + err_wakeup: /* System sleep transitions should never fail */ if (!PMSG_IS_AUTO(msg)) @@ -3043,14 +3047,15 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) * Check whether current status meets the requirement of * usb port power off mechanism */ - pm_qos_stat = dev_pm_qos_flags(&port_dev->dev, - PM_QOS_FLAG_NO_POWER_OFF); - if (!udev->do_remote_wakeup - && pm_qos_stat != PM_QOS_FLAGS_ALL - && udev->persist_enabled - && !status) { - pm_runtime_put_sync(&port_dev->dev); - port_dev->did_runtime_put = true; + if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled) { + enum pm_qos_flags_status pm_qos_stat; + + pm_qos_stat = dev_pm_qos_flags(&port_dev->dev, + PM_QOS_FLAG_NO_POWER_OFF); + if (pm_qos_stat != PM_QOS_FLAGS_ALL) { + pm_runtime_put_sync(&port_dev->dev); + port_dev->did_runtime_put = true; + } } usb_mark_last_busy(hub->hdev); -- cgit v1.2.3 From 98a4f1ff7bea8002ab79d6776e30d27932e88244 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Wed, 3 Jul 2013 22:17:54 +0800 Subject: usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend() The pm qos NO_POWER_OFF flag is checked twice during usb device suspend to see if the usb port power off condition is met. This is redundant and also will prevent the port from being powered off if the NO_POWER_OFF flag is changed to 1 from 0 after the device was already suspended. More detail in the following link. http://marc.info/?l=linux-usb&m=136543949130865&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi: Use ACPI methods to power off ports." Signed-off-by: Lan Tianyu Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8287953e066c..17c3785241a4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3043,19 +3043,9 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) usb_set_device_state(udev, USB_STATE_SUSPENDED); } - /* - * Check whether current status meets the requirement of - * usb port power off mechanism - */ if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled) { - enum pm_qos_flags_status pm_qos_stat; - - pm_qos_stat = dev_pm_qos_flags(&port_dev->dev, - PM_QOS_FLAG_NO_POWER_OFF); - if (pm_qos_stat != PM_QOS_FLAGS_ALL) { - pm_runtime_put_sync(&port_dev->dev); - port_dev->did_runtime_put = true; - } + pm_runtime_put_sync(&port_dev->dev); + port_dev->did_runtime_put = true; } usb_mark_last_busy(hub->hdev); -- cgit v1.2.3 From d49dad3e11638f66be4e16573ffaa8c46a09e3b3 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 5 Aug 2013 18:58:15 -0700 Subject: usb: Don't fail port power resume on device disconnect. Userspace can tell the kernel to power off any USB port, including ones that are visible and connectible to users. When an attached USB device goes into suspend, the port will be powered off if the pm_qos_no_port_poweroff file for its port is set to 0, the device does not have remote wakeup enabled, and the device is marked as persistent. If the user disconnects the USB device while the port is powered off, the current code does not handle that properly. If you disconnect a device, and then run `lsusb -v -s` for the device, the device disconnect does not get handled by the USB core. The runtime resume of the port fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT. This means the port resume fails and khubd doesn't handle the USB device disconnect. This leaves the device listed in lsusb, and the port's runtime_status will be permanently marked as "error". Fix this by ignoring the return value of hub_port_debounce_be_connected. Users can disconnect USB devices while the ports are powered off, and we must be able to handle that. This patch should be backported to kernels as old as 3.9, that contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add usb port auto power off mechanism" Signed-off-by: Sarah Sharp Cc: Lan Tianyu Cc: Alan Stern Cc: Rafael J. Wysocki Cc: stable@vger.kernel.org Signed-off-by: Sarah Sharp --- drivers/usb/core/port.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index d6b0fadf53e9..9909911665ce 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -89,22 +89,19 @@ static int usb_port_runtime_resume(struct device *dev) retval = usb_hub_set_port_power(hdev, hub, port1, true); if (port_dev->child && !retval) { /* - * Wait for usb hub port to be reconnected in order to make - * the resume procedure successful. + * Attempt to wait for usb hub port to be reconnected in order + * to make the resume procedure successful. The device may have + * disconnected while the port was powered off, so ignore the + * return status. */ retval = hub_port_debounce_be_connected(hub, port1); - if (retval < 0) { + if (retval < 0) dev_dbg(&port_dev->dev, "can't get reconnection after setting port power on, status %d\n", retval); - goto out; - } usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE); - - /* Set return value to 0 if debounce successful */ retval = 0; } -out: clear_bit(port1, hub->busy_bits); usb_autopm_put_interface(intf); return retval; -- cgit v1.2.3