From 7671bd1e97b9fa09aea69e76375ada9534c735a3 Mon Sep 17 00:00:00 2001 From: Zhuang Jin Can Date: Mon, 26 Jan 2015 23:30:39 +0800 Subject: Revert "usb: Reset USB-3 devices on USB-3 link bounce" This revert a82b76f7fa6154e8ab2d8071842a3e38b9c0d0ff. The commit causes an extra reset in remote wakeup as described in: http://www.spinics.net/lists/linux-usb/msg119080.html Signed-off-by: Zhuang Jin Can Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 34 +++++++++------------------------- 1 file changed, 9 insertions(+), 25 deletions(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3e9c4d477d1a..4c259aca7a62 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4886,7 +4886,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, static void port_event(struct usb_hub *hub, int port1) __must_hold(&port_dev->status_lock) { - int connect_change, reset_device = 0; + int connect_change; struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev = port_dev->child; struct usb_device *hdev = hub->hdev; @@ -4974,30 +4974,14 @@ static void port_event(struct usb_hub *hub, int port1) if (hub_port_reset(hub, port1, NULL, HUB_BH_RESET_TIME, true) < 0) hub_port_disable(hub, port1, 1); - } else - reset_device = 1; - } - - /* - * On disconnect USB3 protocol ports transit from U0 to - * SS.Inactive to Rx.Detect. If this happens a warm- - * reset is not needed, but a (re)connect may happen - * before hub_wq runs and sees the disconnect, and the - * device may be an unknown state. - * - * If the port went through SS.Inactive without hub_wq - * seeing it the C_LINK_STATE change flag will be set, - * and we reset the dev to put it in a known state. - */ - if (reset_device || (udev && hub_is_superspeed(hub->hdev) - && (portchange & USB_PORT_STAT_C_LINK_STATE) - && (portstatus & USB_PORT_STAT_CONNECTION))) { - usb_unlock_port(port_dev); - usb_lock_device(udev); - usb_reset_device(udev); - usb_unlock_device(udev); - usb_lock_port(port_dev); - connect_change = 0; + } else { + usb_unlock_port(port_dev); + usb_lock_device(udev); + usb_reset_device(udev); + usb_unlock_device(udev); + usb_lock_port(port_dev); + connect_change = 0; + } } if (connect_change) -- cgit v1.2.3