From cb29529ea0030e60ef1bbbf8399a43d397a51526 Mon Sep 17 00:00:00 2001 From: Tkhai Kirill Date: Sat, 23 Feb 2013 23:01:15 +0000 Subject: sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option If a machine has X (X < 4) sunsu ports and cmdline option "console=ttySY" is passed, where X < Y <= 4, than the following panic happens: Unable to handle kernel NULL pointer dereference TPC: RPC: I7: Call Trace: [0000000000453a38] register_console+0x378/0x3e0 [0000000000576fa0] uart_add_one_port+0x2e0/0x340 [000000000057af40] su_probe+0x160/0x2e0 [00000000005b8a4c] platform_drv_probe+0xc/0x20 [00000000005b6c2c] driver_probe_device+0x12c/0x220 [00000000005b6da8] __driver_attach+0x88/0xa0 [00000000005b4df4] bus_for_each_dev+0x54/0xa0 [00000000005b5a54] bus_add_driver+0x154/0x260 [00000000005b7190] driver_register+0x50/0x180 [00000000006d250c] sunsu_init+0x18c/0x1e0 [00000000006c2668] do_one_initcall+0xe8/0x160 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0 [0000000000603764] kernel_init+0x4/0x100 [0000000000405f64] ret_from_syscall+0x1c/0x2c [0000000000000000] (null) 1)Fix the panic; 2)Increment registered port number every successful probe. Signed-off-by: Kirill Tkhai CC: David Miller Signed-off-by: David S. Miller --- drivers/tty/serial/sunsu.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index e343d6670854..451687cb9685 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -968,6 +968,7 @@ static struct uart_ops sunsu_pops = { #define UART_NR 4 static struct uart_sunsu_port sunsu_ports[UART_NR]; +static int nr_inst; /* Number of already registered ports */ #ifdef CONFIG_SERIO @@ -1337,13 +1338,8 @@ static int __init sunsu_console_setup(struct console *co, char *options) printk("Console: ttyS%d (SU)\n", (sunsu_reg.minor - 64) + co->index); - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; + if (co->index > nr_inst) + return -ENODEV; port = &sunsu_ports[co->index].port; /* @@ -1408,7 +1404,6 @@ static enum su_type su_get_type(struct device_node *dp) static int su_probe(struct platform_device *op) { - static int inst; struct device_node *dp = op->dev.of_node; struct uart_sunsu_port *up; struct resource *rp; @@ -1418,16 +1413,16 @@ static int su_probe(struct platform_device *op) type = su_get_type(dp); if (type == SU_PORT_PORT) { - if (inst >= UART_NR) + if (nr_inst >= UART_NR) return -EINVAL; - up = &sunsu_ports[inst]; + up = &sunsu_ports[nr_inst]; } else { up = kzalloc(sizeof(*up), GFP_KERNEL); if (!up) return -ENOMEM; } - up->port.line = inst; + up->port.line = nr_inst; spin_lock_init(&up->port.lock); @@ -1461,6 +1456,8 @@ static int su_probe(struct platform_device *op) } dev_set_drvdata(&op->dev, up); + nr_inst++; + return 0; } @@ -1488,7 +1485,7 @@ static int su_probe(struct platform_device *op) dev_set_drvdata(&op->dev, up); - inst++; + nr_inst++; return 0; -- cgit v1.2.3 From 34dcfb8479ab3c3669561eb9279284cb0eda2572 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 27 Feb 2013 22:30:24 +0100 Subject: TTY: disable debugging warning We added a warning to flush_to_ldisc to report cases when it is called with a NULL tty. It was for debugging purposes and it lead to a patchset from Peter Hurley. The patchset however did not make it to 3.9, so disable the warning now to not disturb people. We can re-add it when the series is in and we are hunting for another bugs. Reported-by: David Miller Cc: stable # 3.8 Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index bb119934e76c..578aa7594b11 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -425,7 +425,7 @@ static void flush_to_ldisc(struct work_struct *work) struct tty_ldisc *disc; tty = port->itty; - if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n")) + if (tty == NULL) return; disc = tty_ldisc_ref(tty); -- cgit v1.2.3 From 09081e5b47f6842669bb645e015deedf191244f4 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Sat, 9 Mar 2013 12:43:54 +0100 Subject: tty: serial: mpc5xxx: fix PSC clock name bug mpc512x platform clock code names PSC clocks as "pscX_mclk" but the driver tries to get "pscX_clk" clock and this results in errors like: mpc52xx-psc-uart 80011700.psc: Failed to get PSC clock entry! The problem appears when opening ttyPSC devices other than the system's serial console. Since getting and enabling the PSC clock fails, uart port startup doesn't succeed and tty flag TTY_IO_ERROR remains set causing further errors in tty ioctls, i.e. 'strace stty -F /dev/ttyPSC1' shows: open("/dev/ttyPSC1", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = 3 dup2(3, 0) = 0 close(3) = 0 fcntl64(0, F_GETFL) = 0x10800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE) fcntl64(0, F_SETFL, O_RDONLY|O_LARGEFILE) = 0 ioctl(0, TCGETS, 0xbff89038) = -1 EIO (Input/output error) Only request PSC clock names that the platform actually provides. Signed-off-by: Anatolij Gustschin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mpc52xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index c0e1fad51be7..018bad922554 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -550,7 +550,7 @@ static int mpc512x_psc_clock(struct uart_port *port, int enable) return 0; psc_num = (port->mapbase & 0xf00) >> 8; - snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); + snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); psc_clk = clk_get(port->dev, clk_name); if (IS_ERR(psc_clk)) { dev_err(port->dev, "Failed to get PSC clock entry!\n"); -- cgit v1.2.3 From 5771a8051d5ebaac0651a957885f55b5f6221a02 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 9 Mar 2013 18:44:37 +1300 Subject: tty: serial: vt8500: Unneccessary duplicated clock code removed Remove the extra code left over when the serial driver was changed to require a clock. There is no fallback to 24Mhz as a clock is now required. Also remove a second call to of_clk_get which is unnecessary. Signed-off-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/vt8500_serial.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index a3f9dd5c9dff..705240e6c4ec 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -611,14 +611,7 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.dev = &pdev->dev; vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); - if (!IS_ERR(vt8500_port->clk)) { - vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); - } else { - /* use the default of 24Mhz if not specified and warn */ - pr_warn("%s: serial clock source not specified\n", __func__); - vt8500_port->uart.uartclk = 24000000; - } + vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); snprintf(vt8500_port->name, sizeof(vt8500_port->name), "VT8500 UART%d", pdev->id); -- cgit v1.2.3 From e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 Mon Sep 17 00:00:00 2001 From: Ley Foon Tan Date: Thu, 7 Mar 2013 10:28:37 +0800 Subject: tty/serial: Add support for Altera serial port Add support for Altera 8250/16550 compatible serial port. Signed-off-by: Ley Foon Tan Cc: stable Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/tty/serial/of-serial.txt | 3 +++ drivers/tty/serial/8250/8250.c | 23 +++++++++++++++++++++- drivers/tty/serial/of_serial.c | 6 ++++++ include/uapi/linux/serial_core.h | 5 ++++- 4 files changed, 35 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 1e1145ca4f3c..8f01cb190f25 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -11,6 +11,9 @@ Required properties: - "nvidia,tegra20-uart" - "nxp,lpc3220-uart" - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 0efc815a4968..661096d25620 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -301,7 +301,28 @@ static const struct serial8250_config uart_config[] = { }, [PORT_8250_CIR] = { .name = "CIR port" - } + }, + [PORT_ALTR_16550_F32] = { + .name = "Altera 16550 FIFO32", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F64] = { + .name = "Altera 16550 FIFO64", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_ALTR_16550_F128] = { + .name = "Altera 16550 FIFO128", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index d5874605682b..b025d5438275 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -241,6 +241,12 @@ static struct of_device_id of_platform_serial_table[] = { { .compatible = "ns16850", .data = (void *)PORT_16850, }, { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, + { .compatible = "altr,16550-FIFO32", + .data = (void *)PORT_ALTR_16550_F32, }, + { .compatible = "altr,16550-FIFO64", + .data = (void *)PORT_ALTR_16550_F64, }, + { .compatible = "altr,16550-FIFO128", + .data = (void *)PORT_ALTR_16550_F128, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index b6a23a483d74..74c2bf7211f8 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -51,7 +51,10 @@ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ #define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ #define PORT_BRCM_TRUMANAGE 25 -#define PORT_MAX_8250 25 /* max port ID */ +#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */ +#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */ +#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ +#define PORT_MAX_8250 28 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed -- cgit v1.2.3 From d13402a4a944e72612a9ec5c9190e35717c02a9d Mon Sep 17 00:00:00 2001 From: Scott Ashcroft Date: Sun, 3 Mar 2013 21:35:06 +0000 Subject: Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards I've managed to find an 8 port version of the card 4 port card which was discussed here: http://marc.info/?l=linux-serial&m=120760744205314&w=2 Looking back at that thread there were two issues in the original patch. 1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post. 2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return. This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card. $ lspci -vvv -n -s 00:08.0 00:08.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1588 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: serial $ dmesg | grep 0000:00:08.0: [ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780 [ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f] [ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f] [ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07] [ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot [ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A [ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A [ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A [ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A [ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A [ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A [ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A [ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A Signed-off-by: Scott Ashcroft Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 791c5a77ec61..85c6bf904feb 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1571,6 +1571,7 @@ pci_wch_ch353_setup(struct serial_private *priv, /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 /* * Master list of serial port init/setup/exit quirks. @@ -1850,15 +1851,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_default_setup, .exit = pci_plx9050_exit, }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = pci_plx9050_exit, - }, { .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_ROMULUS, @@ -3733,7 +3725,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX, PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, - pbn_b0_4_115200 }, + pbn_b2_4_115200 }, + /* Unknown card - subdevice 0x1588 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, + pbn_b2_8_115200 }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_SUBVENDOR_ID_KEYSPAN, PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, -- cgit v1.2.3 From 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Fri, 1 Mar 2013 11:47:20 +0800 Subject: serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller 01:08.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device [1000:0012] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 85c6bf904feb..aa76825229dc 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -4788,6 +4788,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + 0x1000, 0x0012, + 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, -- cgit v1.2.3 From 064256feab4f94d2dc894b181e2f82769966f6c7 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 24 Feb 2013 14:08:39 +0100 Subject: serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char" 92a19f9cec9a80ad93c06e115822deb729e2c6ad introduced a local variable with the same name as the argument to bcm_uart_do_rx, breaking compilation. Fix this by renaming the new variable and its uses where expected. Signed-off-by: Jonas Gorski Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/bcm63xx_uart.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 719594e5fc21..52a3ecd40421 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -235,7 +235,7 @@ static const char *bcm_uart_type(struct uart_port *port) */ static void bcm_uart_do_rx(struct uart_port *port) { - struct tty_port *port = &port->state->port; + struct tty_port *tty_port = &port->state->port; unsigned int max_count; /* limit number of char read in interrupt, should not be @@ -260,7 +260,7 @@ static void bcm_uart_do_rx(struct uart_port *port) bcm_uart_writel(port, val, UART_CTL_REG); port->icount.overrun++; - tty_insert_flip_char(port, 0, TTY_OVERRUN); + tty_insert_flip_char(tty_port, 0, TTY_OVERRUN); } if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) @@ -299,11 +299,11 @@ static void bcm_uart_do_rx(struct uart_port *port) if ((cstat & port->ignore_status_mask) == 0) - tty_insert_flip_char(port, c, flag); + tty_insert_flip_char(tty_port, c, flag); } while (--max_count); - tty_flip_buffer_push(port); + tty_flip_buffer_push(tty_port); } /* -- cgit v1.2.3 From 77e372a3d82e5e4878ce1962207edd766773cc76 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Fri, 22 Feb 2013 16:27:19 +0000 Subject: tty/8250_pnp: serial port detection regression since v3.7 The InsydeH2O BIOS (version dated 09/12/2011) has the following in its pnp resouces for its serial ports: $ cat /sys/bus/pnp/devices/00:0b/resources state = active io disabled irq disabled We do not check if the resources are disabled, and create a bogus ttyS* device. Since commit 835d844d1a28e (8250_pnp: do pnp probe before legacy probe) we get a bogus ttyS0, which prevents the legacy probe from detecting it. Note, the BIOS can also be upgraded, fixing this problem, but for people who can't do that, this fix is needed. Reported-by: Vincent Deffontaines Tested-by: Vincent Deffontaines Signed-off-by: Sean Young Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pnp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 35d9ab95c5cb..b3455a970a1d 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { struct uart_8250_port uart; int ret, line, flags = dev_id->driver_data; + struct resource *res = NULL; if (flags & UNKNOWN_DEV) { ret = serial_pnp_guess_board(dev); @@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&uart, 0, sizeof(uart)); if (pnp_irq_valid(dev, 0)) uart.port.irq = pnp_irq(dev, 0); - if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) { - uart.port.iobase = pnp_port_start(dev, 2); - uart.port.iotype = UPIO_PORT; - } else if (pnp_port_valid(dev, 0)) { - uart.port.iobase = pnp_port_start(dev, 0); + if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) + res = pnp_get_resource(dev, IORESOURCE_IO, 2); + else if (pnp_port_valid(dev, 0)) + res = pnp_get_resource(dev, IORESOURCE_IO, 0); + if (pnp_resource_enabled(res)) { + uart.port.iobase = res->start; uart.port.iotype = UPIO_PORT; } else if (pnp_mem_valid(dev, 0)) { uart.port.mapbase = pnp_mem_start(dev, 0); -- cgit v1.2.3 From 827aa0d36d486f359808c8fb931cf7a71011a09d Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 9 Mar 2013 23:16:44 +0100 Subject: tty: serial: fix typo "ARCH_S5P6450" This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART serial support for S5P6450") - which added this typo - makes clear this should be CPU_S5P6450. Signed-off-by: Paul Bolle Acked-by: Kukjin Kim Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index cf9210db9fa9..40ddbe49a7e2 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -218,7 +218,7 @@ config SERIAL_SAMSUNG_UARTS_4 config SERIAL_SAMSUNG_UARTS int depends on PLAT_SAMSUNG - default 6 if ARCH_S5P6450 + default 6 if CPU_S5P6450 default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help -- cgit v1.2.3 From f2b8dfd9e480c3db3bad0c25c590a5d11b31f4ef Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Sun, 10 Mar 2013 10:33:40 -0400 Subject: serial: 8250: Keep 8250. module options functional after driver rename With commit 835d844d1 (8250_pnp: do pnp probe before legacy probe), the 8250 driver was renamed to 8250_core. This means any existing usage of the 8259. module parameters or as a kernel command line switch is now broken, as the 8250_core driver doesn't parse options belonging to something called "8250". To solve this, we redefine the module options in a dummy function using a redefined MODULE_PARAM_PREFX when built into the kernel. In the case where we're building as a module, we provide an alias to the old 8250 name. The dummy function prevents compiler errors due to global variable redefinitions that happen as part of the module_param_ macro expansions. Signed-off-by: Josh Boyer Acked-by: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 661096d25620..cf6a5383748a 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -3417,3 +3417,32 @@ module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); + +#ifndef MODULE +/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name + * working as well for the module options so we don't break people. We + * need to keep the names identical and the convenient macros will happily + * refuse to let us do that by failing the build with redefinition errors + * of global variables. So we stick them inside a dummy function to avoid + * those conflicts. The options still get parsed, and the redefined + * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. + * + * This is hacky. I'm sorry. + */ +static void __used s8250_options(void) +{ +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "8250." + + module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); + module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); + module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); +#ifdef CONFIG_SERIAL_8250_RSA + __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, + ¶m_array_ops, .arr = &__param_arr_probe_rsa, + 0444, -1); +#endif +} +#else +MODULE_ALIAS("8250"); +#endif -- cgit v1.2.3 From c51d41a1dd8f23a06a4ed651ebb9617de7f59368 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 12 Mar 2013 10:10:32 +0100 Subject: tty: serial: fix typo "SERIAL_S3C2412" The Kconfig symbol SERIAL_S3C2412 got removed in commit da121506eb03ee5daea55404709110b798bd61d9 ("serial: samsung: merge probe() function from all SoC specific extensions"). But it also added a last reference to that symbol. The commit and the tree make clear that CPU_S3C2412 should have been used instead. Signed-off-by: Paul Bolle Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 40ddbe49a7e2..7e7006fd404e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -211,7 +211,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool depends on PLAT_SAMSUNG - default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) + default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs -- cgit v1.2.3