From cc9ca4d95846cbbece48d9cd385550f8fba6a3c1 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 30 Jun 2021 13:56:43 +0100 Subject: serial: tegra: Only print FIFO error message when an error occurs The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by displaying the error message, only when an error occurs. Finally, update the error message to make it clear that enabling the FIFO failed and display the error code. Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status") Cc: Acked-by: Thierry Reding Signed-off-by: Jon Hunter Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 222032792d6c..eba5b9ecba34 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1045,9 +1045,11 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) if (tup->cdata->fifo_mode_enable_status) { ret = tegra_uart_wait_fifo_mode_enabled(tup); - dev_err(tup->uport.dev, "FIFO mode not enabled\n"); - if (ret < 0) + if (ret < 0) { + dev_err(tup->uport.dev, + "Failed to enable FIFO mode: %d\n", ret); return ret; + } } else { /* * For all tegra devices (up to t210), there is a hardware -- cgit v1.2.3