From b0ad20a3b64bf653a717860819691b262c0b2a2b Mon Sep 17 00:00:00 2001 From: Emil Renner Berthing Date: Mon, 4 Oct 2021 19:40:29 +0200 Subject: serial: 8250_dw: Add StarFive JH7100 quirk On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to exactly 16 * 115200Hz and many other common bitrates. Trying this will only result in a higher input clock, but low enough that the UART's internal divisor can't come close enough to the baud rate target. So rather than try to set the input clock it's better to skip the clk_set_rate call and rely solely on the UART's internal divisor. Reviewed-by: Andy Shevchenko Reviewed-by: Geert Uytterhoeven Signed-off-by: Emil Renner Berthing --- drivers/tty/serial/8250/8250_dw.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 53f57c3b9f42..1769808031c5 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -414,6 +414,8 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) if (of_device_is_compatible(np, "marvell,armada-38x-uart")) p->serial_out = dw8250_serial_out38x; + if (of_device_is_compatible(np, "starfive,jh7100-uart")) + p->set_termios = dw8250_do_set_termios; } else if (acpi_dev_present("APMC0D08", NULL, -1)) { p->iotype = UPIO_MEM32; @@ -696,6 +698,7 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "cavium,octeon-3860-uart" }, { .compatible = "marvell,armada-38x-uart" }, { .compatible = "renesas,rzn1-uart" }, + { .compatible = "starfive,jh7100-uart" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); -- cgit v1.2.3