From 94abc56f4d90f289ea32a0a11d3577fcd8cb28fb Mon Sep 17 00:00:00 2001 From: Ning Jiang Date: Mon, 5 Sep 2011 16:28:18 +0800 Subject: serial-core: power up uart port early before we do set_termios when resuming The following patch removed uart_change_pm() in uart_resume_port(): commit 5933a161abcb8d83a2c145177f48027c3c0a8995 Author: Yin Kangkai serial-core: reset the console speed on resume It will break the pxa serial driver when the system resumes from suspend mode as it will try to set baud rate divider register in set_termios but with clock off. The register value can not be set correctly on some platform if the clock is disabled. The pxa driver will check the value and report the following warning: ------------[ cut here ]------------ WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250() Modules linked in: [] (unwind_backtrace+0x0/0xf0) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x18/0x1c) [] (warn_slowpath_null+0x18/0x1c) from [] (serial_pxa_set_termios+0x1dc/0x250) [] (serial_pxa_set_termios+0x1dc/0x250) from [] (uart_resume_port+0x128/0x2dc) [] (uart_resume_port+0x128/0x2dc) from [] (serial_pxa_resume+0x18/0x24) [] (serial_pxa_resume+0x18/0x24) from [] (platform_pm_resume+0x40/0x4c) [] (platform_pm_resume+0x40/0x4c) from [] (pm_op+0x68/0xb4) [] (pm_op+0x68/0xb4) from [] (device_resume+0xb0/0xec) [] (device_resume+0xb0/0xec) from [] (dpm_resume+0xe0/0x194) [] (dpm_resume+0xe0/0x194) from [] (dpm_resume_end+0xc/0x18) [] (dpm_resume_end+0xc/0x18) from [] (suspend_devices_and_enter+0x16c/0x1ac) [] (suspend_devices_and_enter+0x16c/0x1ac) from [] (enter_state+0xac/0xdc) [] (enter_state+0xac/0xdc) from [] (state_store+0xa0/0xbc) [] (state_store+0xa0/0xbc) from [] (kobj_attr_store+0x18/0x1c) [] (kobj_attr_store+0x18/0x1c) from [] (sysfs_write_file+0x108/0x140) [] (sysfs_write_file+0x108/0x140) from [] (vfs_write+0xac/0x134) [] (vfs_write+0xac/0x134) from [] (sys_write+0x3c/0x68) [] (sys_write+0x3c/0x68) from [] (ret_fast_syscall+0x0/0x2c) ---[ end trace 88289eceb4675b04 ]--- This patch fix the problem by adding the power on opertion back for uart console when console_suspend_enabled is true. Signed-off-by: Ning Jiang Tested-by: Mayank Rana Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index a32dc4362224..e562b1224466 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1975,6 +1975,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (port->tty && port->tty->termios && termios.c_cflag == 0) termios = *(port->tty->termios); + if (console_suspend_enabled) + uart_change_pm(state, 0); uport->ops->set_termios(uport, &termios, NULL); if (console_suspend_enabled) console_start(uport->cons); -- cgit v1.2.3