From 4e857c58efeb99393cba5a5d0d8ec7117183137c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 17 Mar 2014 18:06:10 +0100 Subject: arch: Mass conversion of smp_mb__*() Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra Acked-by: Paul E. McKenney Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar --- drivers/tty/n_tty.c | 2 +- drivers/tty/serial/mxs-auart.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 41fe8a047d37..746ae80b972f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2041,7 +2041,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, if (found) clear_bit(eol, ldata->read_flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); ldata->read_tail += c; if (found) { diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index aa97fd845b4d..4b5b3c2fe328 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -200,7 +200,7 @@ static void dma_tx_callback(void *param) /* clear the bit used to serialize the DMA tx. */ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); /* wake up the possible processes. */ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -275,7 +275,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) mxs_auart_dma_tx(s, i); } else { clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); } return; } -- cgit v1.2.3 From 50d16ca29bd2ccbca08e4f74fe1d9618c735c22f Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 25 Mar 2014 14:05:08 +0100 Subject: pch_uart: Add uart device to irq name This will additionally show the specific UART device instead of the general module name. This cames in handy so check for the interupts of a specific device if there are several of them. Signed-off-by: Alexander Stein Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 0931b3fe9edf..e194bb32b27b 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -257,6 +257,8 @@ struct eg20t_port { dma_addr_t rx_buf_dma; struct dentry *debugfs; +#define IRQ_NAME_SIZE 17 + char irq_name[IRQ_NAME_SIZE]; /* protect the eg20t_port private structure and io access to membase */ spinlock_t lock; @@ -1343,7 +1345,7 @@ static int pch_uart_startup(struct uart_port *port) return ret; ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, - KBUILD_MODNAME, priv); + priv->irq_name, priv); if (ret < 0) return ret; @@ -1818,6 +1820,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->port.line = board->line_no; priv->trigger = PCH_UART_HAL_TRIGGER_M; + snprintf(priv->irq_name, IRQ_NAME_SIZE, + KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d", + priv->port.line); + spin_lock_init(&priv->port.lock); pci_set_drvdata(pdev, priv); -- cgit v1.2.3 From c439c33d85e252d3b2b454ab7ba38b62d6e0a830 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Thu, 24 Apr 2014 11:46:14 +0200 Subject: 8250_dw: Support all baudrates on baytrail In the same manner as 8250_pci, 8250_dw needs some baytrail specific quirks to be used. The reference clock needs to be adjusted before divided in order to have the minimum error rate on the baudrate. The specific byt set termios function is stored in the driver_data field of the acpi device id via the dw8250_acpi_desc structure. Remove the uartclk field which is no longer delivered as driver data. Signed-off-by: Loic Poulain Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 81 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 77 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index ed3113576740..51b307aab75e 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -62,6 +62,70 @@ struct dw8250_data { struct uart_8250_dma dma; }; +struct dw8250_acpi_desc { + void (*set_termios)(struct uart_port *p, struct ktermios *termios, + struct ktermios *old); +}; + +#define BYT_PRV_CLK 0x800 +#define BYT_PRV_CLK_EN (1 << 0) +#define BYT_PRV_CLK_M_VAL_SHIFT 1 +#define BYT_PRV_CLK_N_VAL_SHIFT 16 +#define BYT_PRV_CLK_UPDATE (1 << 31) + +static void byt_set_termios(struct uart_port *p, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = tty_termios_baud_rate(termios); + unsigned int m, n; + u32 reg; + + /* + * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the + * dividers must be adjusted. + * + * uartclk = (m / n) * 100 MHz, where m <= n + */ + switch (baud) { + case 500000: + case 1000000: + case 2000000: + case 4000000: + m = 64; + n = 100; + p->uartclk = 64000000; + break; + case 3500000: + m = 56; + n = 100; + p->uartclk = 56000000; + break; + case 1500000: + case 3000000: + m = 48; + n = 100; + p->uartclk = 48000000; + break; + case 2500000: + m = 40; + n = 100; + p->uartclk = 40000000; + break; + default: + m = 2304; + n = 3125; + p->uartclk = 73728000; + } + + /* Reset the clock */ + reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT); + writel(reg, p->membase + BYT_PRV_CLK); + reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; + writel(reg, p->membase + BYT_PRV_CLK); + + serial8250_do_set_termios(p, termios, old); +} + static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) { struct dw8250_data *d = p->private_data; @@ -278,6 +342,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up, { const struct acpi_device_id *id; struct uart_port *p = &up->port; + struct dw8250_acpi_desc *acpi_desc; dw8250_setup_port(up); @@ -290,14 +355,18 @@ static int dw8250_probe_acpi(struct uart_8250_port *up, p->serial_out = dw8250_serial_out32; p->regshift = 2; - if (!p->uartclk) - p->uartclk = (unsigned int)id->driver_data; - up->dma = &data->dma; up->dma->rxconf.src_maxburst = p->fifosize / 4; up->dma->txconf.dst_maxburst = p->fifosize / 4; + acpi_desc = (struct dw8250_acpi_desc *)id->driver_data; + if (!acpi_desc) + return 0; + + if (acpi_desc->set_termios) + p->set_termios = acpi_desc->set_termios; + return 0; } @@ -445,12 +514,16 @@ static const struct of_device_id dw8250_of_match[] = { }; MODULE_DEVICE_TABLE(of, dw8250_of_match); +static struct dw8250_acpi_desc byt_8250_desc = { + .set_termios = byt_set_termios, +}; + static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C4", 0 }, { "INT33C5", 0 }, { "INT3434", 0 }, { "INT3435", 0 }, - { "80860F0A", 0 }, + { "80860F0A", (kernel_ulong_t)&byt_8250_desc}, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); -- cgit v1.2.3 From fcbee4d49f30eb0eaa83a62e6a3cab5a892ed93f Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 24 Apr 2014 15:54:44 +0900 Subject: serial: sh-sci: Add device tree support for r8a7779 According to the platform data for the legacy-C initialisation of sh-sci for the r8a7779 SoC and my own testing the SCIx_SH4_SCIF_REGTYPE bit of scscr needs to be set. Signed-off-by: Simon Horman Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/renesas,sci-serial.txt | 1 + drivers/tty/serial/sh-sci.c | 10 +++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 53e6c175db6c..bba86de1a094 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -12,6 +12,7 @@ Required properties: - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. + - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 88236da0ddf7..3b5d2f679946 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2419,6 +2419,7 @@ static int sci_remove(struct platform_device *dev) struct sci_port_info { unsigned int type; unsigned int regtype; + unsigned int scscr_extra; }; static const struct of_device_id of_sci_match[] = { @@ -2428,6 +2429,13 @@ static const struct of_device_id of_sci_match[] = { .type = PORT_SCIF, .regtype = SCIx_SH4_SCIF_REGTYPE, }, + }, { + .compatible = "renesas,scif-r8a7779", + .data = (void *)&(const struct sci_port_info) { + .type = PORT_SCIF, + .regtype = SCIx_SH4_SCIF_REGTYPE, + .scscr_extra = SCSCR_CKE1, + }, }, { .compatible = "renesas,scifa", .data = &(const struct sci_port_info) { @@ -2488,7 +2496,7 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; p->type = info->type; p->regtype = info->regtype; - p->scscr = SCSCR_RE | SCSCR_TE; + p->scscr = SCSCR_RE | SCSCR_TE | info->scscr_extra; return p; } -- cgit v1.2.3 From 22766ed8a235f3c9043678c7c594afe683b2372f Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Fri, 28 Mar 2014 11:41:38 +0000 Subject: serial: mux: Align SUPPORT_SYSRQ behaviour with other drivers. The mux driver is anomalous among all the serial drivers that can define SUPPORT_SYSRQ because it can, with some configs, set SUPPORT_SYSRQ when SERIAL_CORE_CONSOLE is not set. Not only does this impose a pointless (but tiny) runtime overhead for such configs but, more significantly, it adds needless complexity when doing a code review to check for unexpected side effects of any changes to the serial core. This is (cross-)compile tested only because I do not have any PA-RISC hardware. Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 7fd6aaaacd8e..9b27d34ad49e 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -29,7 +29,7 @@ #include #include -#ifdef CONFIG_MAGIC_SYSRQ +#if defined(CONFIG_SERIAL_MUX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #include #define SUPPORT_SYSRQ #endif -- cgit v1.2.3 From 0f1e126b8c50a479a9047654f8ceda5ccfaa0d8a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 26 Mar 2014 22:33:42 +0100 Subject: tty: serial: replace del_timer by del_timer_sync Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exists. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @r@ declarer name module_exit; identifier ex; @@ module_exit(ex); @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c index 9b27d34ad49e..be127d0da32c 100644 --- a/drivers/tty/serial/mux.c +++ b/drivers/tty/serial/mux.c @@ -613,7 +613,7 @@ static void __exit mux_exit(void) { /* Delete the Mux timer. */ if(port_cnt > 0) { - del_timer(&mux_timer); + del_timer_sync(&mux_timer); #ifdef CONFIG_SERIAL_MUX_CONSOLE unregister_console(&mux_console); #endif -- cgit v1.2.3 From c7d44a02ac606c2bebf90751deebec2321379d6d Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 21 Apr 2014 10:06:43 -0700 Subject: serial_core: Commonalize crlf when working w/ a non open console port In (efe2f29 kgdboc,kdb: Allow kdb to work on a non open console port) support was added to directly use the "write_char" functions when doing kdb over a non-open console port. This is great, but it ends up bypassing the normal code in uart_console_write() that adds a carriage return before any newlines. There appears to have been a trend to add this support directly in some console driver's poll_put_char() functions. This had a few side effects, including: - In this case we were doing LFCR, not CRLF. This was fixed in uart_console_write() back in (d358788 [SERIAL] kernel console should send CRLF not LFCR) - Not all serial drivers had the LFCR code in their poll_put_char() functions. In my case I was running serial/samsung.c which lacked it. I've moved the handling to uart_poll_put_char() to fix the above problems. Now when I use kdb (and don't point console= to the same UART) I no longer get: [0]kdb> [0]kdb> [0]kdb> Signed-off-by: Doug Anderson Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 5 ----- drivers/tty/serial/pch_uart.c | 5 ----- drivers/tty/serial/pxa.c | 5 ----- drivers/tty/serial/serial_core.c | 3 +++ drivers/tty/serial/serial_txx9.c | 5 ----- 5 files changed, 3 insertions(+), 20 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 81f909c2101f..ffee9825fbac 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port, wait_for_xmitr(up, BOTH_EMPTY); /* * Send the character out. - * If a LF, also do CR... */ serial_port_out(port, UART_TX, c); - if (c == 10) { - wait_for_xmitr(up, BOTH_EMPTY); - serial_port_out(port, UART_TX, 13); - } /* * Finally, wait for transmitter to become empty diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index e194bb32b27b..0cb6a8e52bd0 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1590,13 +1590,8 @@ static void pch_uart_put_poll_char(struct uart_port *port, wait_for_xmitr(priv, UART_LSR_THRE); /* * Send the character out. - * If a LF, also do CR... */ iowrite8(c, priv->membase + PCH_UART_THR); - if (c == 10) { - wait_for_xmitr(priv, UART_LSR_THRE); - iowrite8(13, priv->membase + PCH_UART_THR); - } /* * Finally, wait for transmitter to become empty diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index f9f20f383760..9e7ee39f8b2a 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -711,13 +711,8 @@ static void serial_pxa_put_poll_char(struct uart_port *port, wait_for_xmitr(up); /* * Send the character out. - * If a LF, also do CR... */ serial_out(up, UART_TX, c); - if (c == 10) { - wait_for_xmitr(up); - serial_out(up, UART_TX, 13); - } /* * Finally, wait for transmitter to become empty diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f26834d262b3..5dba9766f626 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2236,6 +2236,9 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) return; port = state->uart_port; + + if (ch == '\n') + port->ops->poll_put_char(port, '\r'); port->ops->poll_put_char(port, ch); } #endif diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 90a080b1f9ee..60f49b9d7e39 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -535,13 +535,8 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) wait_for_xmitr(up); /* * Send the character out. - * If a LF, also do CR... */ sio_out(up, TXX9_SITFIFO, c); - if (c == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } /* * Finally, wait for transmitter to become empty -- cgit v1.2.3 From 6bf789672ee8387fda08af1deeffd12126e60659 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:27 -0500 Subject: Revert "serial: omap: unlock the port lock" This reverts commit 0324a821029e1f54e7a7f8fed48693cfce42dc0e. That commit tried to fix a deadlock problem when using hci_ldisc, but it turns out the bug was in hci_ldsic all along where it was calling ->write() from within ->write_wakeup() callback. The problem is that ->write_wakeup() was called with port lock held and ->write() tried to grab the same port lock. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 08b6b9419f0d..837f6c1c8e7a 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -398,11 +398,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) break; } while (--count > 0); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { - spin_unlock(&up->port.lock); + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); - spin_lock(&up->port.lock); - } if (uart_circ_empty(xmit)) serial_omap_stop_tx(&up->port); -- cgit v1.2.3 From 5b6acc79252e65a2bc3181a55d45c8e7b6f7876c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:29 -0500 Subject: tty: serial: add missing braces per CodingStyle we should have those braces, no functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 837f6c1c8e7a..f456f461dd02 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1694,8 +1694,10 @@ static int serial_omap_probe(struct platform_device *pdev) omap_up_info->DTR_present) { up->DTR_gpio = omap_up_info->DTR_gpio; up->DTR_inverted = omap_up_info->DTR_inverted; - } else + } else { up->DTR_gpio = -EINVAL; + } + up->DTR_active = 0; up->dev = &pdev->dev; @@ -1757,6 +1759,7 @@ static int serial_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, up); if (omap_up_info->autosuspend_timeout == 0) omap_up_info->autosuspend_timeout = -1; + device_init_wakeup(up->dev, true); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, -- cgit v1.2.3 From 404dc57c0201298deb76a122894cc91b37f2761f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:30 -0500 Subject: tty: serial: omap: switch over to devm_request_gpio this will make sure gpio gets freed automatically when this device is destroyed. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f456f461dd02..07d4273e35a1 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1611,7 +1611,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, /* check for tx enable gpio */ up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags); if (gpio_is_valid(up->rts_gpio)) { - ret = gpio_request(up->rts_gpio, "omap-serial"); + ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial"); if (ret < 0) return ret; ret = gpio_direction_output(up->rts_gpio, @@ -1677,7 +1677,8 @@ static int serial_omap_probe(struct platform_device *pdev) if (gpio_is_valid(omap_up_info->DTR_gpio) && omap_up_info->DTR_present) { - ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial"); + ret = devm_gpio_request(&pdev->dev, omap_up_info->DTR_gpio, + "omap-serial"); if (ret < 0) return ret; ret = gpio_direction_output(omap_up_info->DTR_gpio, -- cgit v1.2.3 From cc51638ab4e8a0489b943ed027c37214540a07a6 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:31 -0500 Subject: tty: serial: omap: cleanup variable declarations cleanup only, no functional changes. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 07d4273e35a1..381374030293 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1641,10 +1641,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, static int serial_omap_probe(struct platform_device *pdev) { - struct uart_omap_port *up; - struct resource *mem, *irq; struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); - int ret, uartirq = 0, wakeirq = 0; + struct uart_omap_port *up; + struct resource *mem; + struct resource *irq; + int uartirq = 0; + int wakeirq = 0; + int ret; /* The optional wakeirq may be specified in the board dts file */ if (pdev->dev.of_node) { -- cgit v1.2.3 From 54af692c9fcd736977bc94293c73997e94f17378 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:32 -0500 Subject: tty: serial: omap: switch over to platform_get_resource this way we can remove one pointer declaration. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 381374030293..cb45e8810b35 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1644,7 +1644,6 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); struct uart_omap_port *up; struct resource *mem; - struct resource *irq; int uartirq = 0; int wakeirq = 0; int ret; @@ -1658,12 +1657,9 @@ static int serial_omap_probe(struct platform_device *pdev) omap_up_info = of_get_uart_port_info(&pdev->dev); pdev->dev.platform_data = omap_up_info; } else { - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { - dev_err(&pdev->dev, "no irq resource?\n"); - return -ENODEV; - } - uartirq = irq->start; + uartirq = platform_get_irq(pdev, 0); + if (uartirq < 0) + return -EPROBE_DEFER; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From d044d2356f8dd18c755e13f34318bc03ef9c6887 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:33 -0500 Subject: tty: serial: omap: switch over to devm_ioremap_resource just using helper function to remove some duplicated code a bit. While at that, also move allocation of struct uart_omap_port higher in the code so that we return much earlier in case of no memory. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 32 +++++++++----------------------- 1 file changed, 9 insertions(+), 23 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index cb45e8810b35..b46aaf33f35e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1644,6 +1644,7 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); struct uart_omap_port *up; struct resource *mem; + void __iomem *base; int uartirq = 0; int wakeirq = 0; int ret; @@ -1662,17 +1663,14 @@ static int serial_omap_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } + up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; - if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem), - pdev->dev.driver->name)) { - dev_err(&pdev->dev, "memory region already claimed\n"); - return -EBUSY; - } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(base)) + return PTR_ERR(base); if (gpio_is_valid(omap_up_info->DTR_gpio) && omap_up_info->DTR_present) { @@ -1686,10 +1684,6 @@ static int serial_omap_probe(struct platform_device *pdev) return ret; } - up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); - if (!up) - return -ENOMEM; - if (gpio_is_valid(omap_up_info->DTR_gpio) && omap_up_info->DTR_present) { up->DTR_gpio = omap_up_info->DTR_gpio; @@ -1732,14 +1726,7 @@ static int serial_omap_probe(struct platform_device *pdev) sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; - up->port.membase = devm_ioremap(&pdev->dev, mem->start, - resource_size(mem)); - if (!up->port.membase) { - dev_err(&pdev->dev, "can't ioremap UART\n"); - ret = -ENOMEM; - goto err_ioremap; - } - + up->port.membase = base; up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; if (!up->port.uartclk) { @@ -1786,7 +1773,6 @@ static int serial_omap_probe(struct platform_device *pdev) err_add_port: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); -err_ioremap: err_rs485: err_port_line: dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", -- cgit v1.2.3 From 985bfd54c826c0ba873ca0adfd5589263e0c6ee2 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:34 -0500 Subject: tty: serial: omap: remove some dead code nobody passes a DTR_gpio to this driver, so this code is not necessary. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 39 --------------------------------------- 1 file changed, 39 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b46aaf33f35e..66546828a8d2 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -163,10 +163,6 @@ struct uart_omap_port { u8 wakeups_enabled; u32 features; - int DTR_gpio; - int DTR_inverted; - int DTR_active; - struct serial_rs485 rs485; int rts_gpio; @@ -694,16 +690,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) serial_out(up, UART_MCR, up->mcr); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); - - if (gpio_is_valid(up->DTR_gpio) && - !!(mctrl & TIOCM_DTR) != up->DTR_active) { - up->DTR_active = !up->DTR_active; - if (gpio_cansleep(up->DTR_gpio)) - schedule_work(&up->qos_work); - else - gpio_set_value(up->DTR_gpio, - up->DTR_active != up->DTR_inverted); - } } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -847,9 +833,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work) qos_work); pm_qos_update_request(&up->pm_qos_request, up->latency); - if (gpio_is_valid(up->DTR_gpio)) - gpio_set_value_cansleep(up->DTR_gpio, - up->DTR_active != up->DTR_inverted); } static void @@ -1672,28 +1655,6 @@ static int serial_omap_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - if (gpio_is_valid(omap_up_info->DTR_gpio) && - omap_up_info->DTR_present) { - ret = devm_gpio_request(&pdev->dev, omap_up_info->DTR_gpio, - "omap-serial"); - if (ret < 0) - return ret; - ret = gpio_direction_output(omap_up_info->DTR_gpio, - omap_up_info->DTR_inverted); - if (ret < 0) - return ret; - } - - if (gpio_is_valid(omap_up_info->DTR_gpio) && - omap_up_info->DTR_present) { - up->DTR_gpio = omap_up_info->DTR_gpio; - up->DTR_inverted = omap_up_info->DTR_inverted; - } else { - up->DTR_gpio = -EINVAL; - } - - up->DTR_active = 0; - up->dev = &pdev->dev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; -- cgit v1.2.3 From 5c3f4bdee8010151f2f272a414ef5948ae945c92 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:35 -0500 Subject: tty: serial: omap: remove unneeded singlethread workqueue it wasn't used by anything, just remove it. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 66546828a8d2..ab22dabfb37e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -180,8 +180,6 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); -static struct workqueue_struct *serial_omap_uart_wq; - static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { offset <<= up->port.regshift; @@ -1701,7 +1699,6 @@ static int serial_omap_probe(struct platform_device *pdev) up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; pm_qos_add_request(&up->pm_qos_request, PM_QOS_CPU_DMA_LATENCY, up->latency); - serial_omap_uart_wq = create_singlethread_workqueue(up->name); INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); platform_set_drvdata(pdev, up); -- cgit v1.2.3 From d900d98ad6429374333d526db2d6c1180e432223 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 23 Apr 2014 09:58:36 -0500 Subject: tty: serial: omap: fix Sparse warnings Fix the following Sparse warnings: drivers/tty/serial/omap-serial.c:1418:49: warning: incorrect \ type in argument 2 (different address spaces) drivers/tty/serial/omap-serial.c:1418:49: expected void const \ [noderef] *from drivers/tty/serial/omap-serial.c:1418:49: got struct serial_rs485 \ * drivers/tty/serial/omap-serial.c:1426:35: warning: incorrect \ type in argument 1 (different address spaces) drivers/tty/serial/omap-serial.c:1426:35: expected void [noderef] \ *to drivers/tty/serial/omap-serial.c:1426:35: got struct serial_rs485 \ * Reported-by: Nishanth Menon Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index ab22dabfb37e..d017cec8a34a 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1398,7 +1398,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) switch (cmd) { case TIOCSRS485: - if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + if (copy_from_user(&rs485conf, (void __user *) arg, sizeof(rs485conf))) return -EFAULT; @@ -1406,7 +1406,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) break; case TIOCGRS485: - if (copy_to_user((struct serial_rs485 *) arg, + if (copy_to_user((void __user *) arg, &(to_uart_omap_port(port)->rs485), sizeof(rs485conf))) return -EFAULT; -- cgit v1.2.3 From 489810a1a6efa08eb8168b96dcc22d71be2867b9 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 4 Apr 2014 17:23:37 -0700 Subject: tty: xuartps: Fix kernel-doc errors in the driver No functional changes. Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 109 +++++++++++++++++-------------------- 1 file changed, 49 insertions(+), 60 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index f619ad5b5eae..b2f929e48ddd 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -163,11 +163,11 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); /** * struct xuartps - device data - * @port Pointer to the UART port - * @refclk Reference clock - * @aperclk APB clock - * @baud Current baud rate - * @clk_rate_change_nb Notifier block for clock changes + * @port: Pointer to the UART port + * @refclk: Reference clock + * @aperclk: APB clock + * @baud: Current baud rate + * @clk_rate_change_nb: Notifier block for clock changes */ struct xuartps { struct uart_port *port; @@ -183,8 +183,8 @@ struct xuartps { * @irq: Irq number * @dev_id: Id of the port * - * Returns IRQHANDLED - **/ + * Return: IRQHANDLED + */ static irqreturn_t xuartps_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; @@ -325,7 +325,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) * @rbdiv: BDIV value (return value) * @rcd: CD value (return value) * @div8: Value for clk_sel bit in mod (return value) - * Returns baud rate, requested baud when possible, or actual baud when there + * Return: baud rate, requested baud when possible, or actual baud when there * was too much error, zero if no valid divisors are found. * * Formula to obtain baud rate is @@ -384,7 +384,7 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud, * xuartps_set_baud_rate - Calculate and set the baud rate * @port: Handle to the uart port structure * @baud: Baud rate to set - * Returns baud rate, requested baud when possible, or actual baud when there + * Return: baud rate, requested baud when possible, or actual baud when there * was too much error, zero if no valid divisors are found. */ static unsigned int xuartps_set_baud_rate(struct uart_port *port, @@ -419,7 +419,7 @@ static unsigned int xuartps_set_baud_rate(struct uart_port *port, * @nb: Notifier block * @event: Notify event * @data: Notifier data - * Returns NOTIFY_OK on success, NOTIFY_BAD on error. + * Return: NOTIFY_OK on success, NOTIFY_BAD on error. */ static int xuartps_clk_notifier_cb(struct notifier_block *nb, unsigned long event, void *data) @@ -514,8 +514,7 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, /** * xuartps_start_tx - Start transmitting bytes * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_start_tx(struct uart_port *port) { unsigned int status, numbytes = port->fifosize; @@ -562,8 +561,7 @@ static void xuartps_start_tx(struct uart_port *port) /** * xuartps_stop_tx - Stop TX * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_stop_tx(struct uart_port *port) { unsigned int regval; @@ -577,8 +575,7 @@ static void xuartps_stop_tx(struct uart_port *port) /** * xuartps_stop_rx - Stop RX * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_stop_rx(struct uart_port *port) { unsigned int regval; @@ -593,8 +590,8 @@ static void xuartps_stop_rx(struct uart_port *port) * xuartps_tx_empty - Check whether TX is empty * @port: Handle to the uart port structure * - * Returns TIOCSER_TEMT on success, 0 otherwise - **/ + * Return: TIOCSER_TEMT on success, 0 otherwise + */ static unsigned int xuartps_tx_empty(struct uart_port *port) { unsigned int status; @@ -608,8 +605,7 @@ static unsigned int xuartps_tx_empty(struct uart_port *port) * transmitting char breaks * @port: Handle to the uart port structure * @ctl: Value based on which start or stop decision is taken - * - **/ + */ static void xuartps_break_ctl(struct uart_port *port, int ctl) { unsigned int status; @@ -636,8 +632,7 @@ static void xuartps_break_ctl(struct uart_port *port, int ctl) * @port: Handle to the uart port structure * @termios: Handle to the input termios structure * @old: Values of the previously saved termios structure - * - **/ + */ static void xuartps_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { @@ -761,8 +756,8 @@ static void xuartps_set_termios(struct uart_port *port, * xuartps_startup - Called when an application opens a xuartps port * @port: Handle to the uart port structure * - * Returns 0 on success, negative error otherwise - **/ + * Return: 0 on success, negative error otherwise + */ static int xuartps_startup(struct uart_port *port) { unsigned int retval = 0, status = 0; @@ -824,8 +819,7 @@ static int xuartps_startup(struct uart_port *port) /** * xuartps_shutdown - Called when an application closes a xuartps port * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_shutdown(struct uart_port *port) { int status; @@ -844,8 +838,8 @@ static void xuartps_shutdown(struct uart_port *port) * xuartps_type - Set UART type to xuartps port * @port: Handle to the uart port structure * - * Returns string on success, NULL otherwise - **/ + * Return: string on success, NULL otherwise + */ static const char *xuartps_type(struct uart_port *port) { return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL; @@ -856,8 +850,8 @@ static const char *xuartps_type(struct uart_port *port) * @port: Handle to the uart port structure * @ser: Handle to the structure whose members are compared * - * Returns 0 if success otherwise -EINVAL - **/ + * Return: 0 if success otherwise -EINVAL + */ static int xuartps_verify_port(struct uart_port *port, struct serial_struct *ser) { @@ -880,8 +874,8 @@ static int xuartps_verify_port(struct uart_port *port, * uart_add_one_port() * @port: Handle to the uart port structure * - * Returns 0, -ENOMEM if request fails - **/ + * Return: 0, -ENOMEM if request fails + */ static int xuartps_request_port(struct uart_port *port) { if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE, @@ -903,8 +897,7 @@ static int xuartps_request_port(struct uart_port *port) * port, called when the driver removes a xuartps * port via uart_remove_one_port(). * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_release_port(struct uart_port *port) { release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE); @@ -917,8 +910,7 @@ static void xuartps_release_port(struct uart_port *port) * xuartps port * @port: Handle to the uart port structure * @flags: If any - * - **/ + */ static void xuartps_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0) @@ -930,9 +922,8 @@ static void xuartps_config_port(struct uart_port *port, int flags) * * @port: Handle to the uart port structure * - * Returns the modem control state - * - **/ + * Return: the modem control state + */ static unsigned int xuartps_get_mctrl(struct uart_port *port) { return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; @@ -1040,8 +1031,8 @@ static struct uart_port xuartps_port[2]; * xuartps_get_port - Configure the port from the platform device resource * info * - * Returns a pointer to a uart_port or NULL for failure - **/ + * Return: a pointer to a uart_port or NULL for failure + */ static struct uart_port *xuartps_get_port(void) { struct uart_port *port; @@ -1078,8 +1069,7 @@ static struct uart_port *xuartps_get_port(void) /** * xuartps_console_wait_tx - Wait for the TX to be full * @port: Handle to the uart port structure - * - **/ + */ static void xuartps_console_wait_tx(struct uart_port *port) { while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY) @@ -1091,8 +1081,7 @@ static void xuartps_console_wait_tx(struct uart_port *port) * xuartps_console_putchar - write the character to the FIFO buffer * @port: Handle to the uart port structure * @ch: Character to be written - * - **/ + */ static void xuartps_console_putchar(struct uart_port *port, int ch) { xuartps_console_wait_tx(port); @@ -1101,10 +1090,10 @@ static void xuartps_console_putchar(struct uart_port *port, int ch) /** * xuartps_console_write - perform write operation - * @port: Handle to the uart port structure + * @co: Console handle * @s: Pointer to character array * @count: No of characters - **/ + */ static void xuartps_console_write(struct console *co, const char *s, unsigned int count) { @@ -1151,8 +1140,8 @@ static void xuartps_console_write(struct console *co, const char *s, * @co: Console handle * @options: Initial settings of uart * - * Returns 0, -ENODEV if no device - **/ + * Return: 0, -ENODEV if no device + */ static int __init xuartps_console_setup(struct console *co, char *options) { struct uart_port *port = &xuartps_port[co->index]; @@ -1190,8 +1179,8 @@ static struct console xuartps_console = { /** * xuartps_console_init - Initialization call * - * Returns 0 on success, negative error otherwise - **/ + * Return: 0 on success, negative error otherwise + */ static int __init xuartps_console_init(void) { register_console(&xuartps_console); @@ -1221,7 +1210,7 @@ static struct uart_driver xuartps_uart_driver = { * xuartps_suspend - suspend event * @device: Pointer to the device structure * - * Returns 0 + * Return: 0 */ static int xuartps_suspend(struct device *device) { @@ -1269,7 +1258,7 @@ static int xuartps_suspend(struct device *device) * xuartps_resume - Resume after a previous suspend * @device: Pointer to the device structure * - * Returns 0 + * Return: 0 */ static int xuartps_resume(struct device *device) { @@ -1336,8 +1325,8 @@ static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume); * xuartps_probe - Platform driver probe * @pdev: Pointer to the platform device structure * - * Returns 0 on success, negative error otherwise - **/ + * Return: 0 on success, negative error otherwise + */ static int xuartps_probe(struct platform_device *pdev) { int rc; @@ -1437,8 +1426,8 @@ err_out_clk_dis_aper: * xuartps_remove - called when the platform driver is unregistered * @pdev: Pointer to the platform device structure * - * Returns 0 on success, negative error otherwise - **/ + * Return: 0 on success, negative error otherwise + */ static int xuartps_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); @@ -1481,8 +1470,8 @@ static struct platform_driver xuartps_platform_driver = { /** * xuartps_init - Initial driver registration call * - * Returns whether the registration was successful or not - **/ + * Return: whether the registration was successful or not + */ static int __init xuartps_init(void) { int retval = 0; @@ -1502,7 +1491,7 @@ static int __init xuartps_init(void) /** * xuartps_exit - Driver unregistration call - **/ + */ static void __exit xuartps_exit(void) { /* The order of unregistration is important. Unregister the -- cgit v1.2.3 From 928e9263492069eeebb4c867b841508837895e0e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 4 Apr 2014 17:23:38 -0700 Subject: tty: xuartps: Initialize ports according to aliases Register port numbers according to order in DT aliases. If aliases are not defined, order in DT is used. If aliases are defined, register port id based on that. This patch ensures proper ttyPS0/1 assignment. [soren]: Combined integer declarations in probe(), removed warning message if no alias is found. Signed-off-by: Michal Simek Signed-off-by: Soren Brinkmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b2f929e48ddd..2cd0cd456c7a 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1031,17 +1031,21 @@ static struct uart_port xuartps_port[2]; * xuartps_get_port - Configure the port from the platform device resource * info * + * @id: Port id + * * Return: a pointer to a uart_port or NULL for failure */ -static struct uart_port *xuartps_get_port(void) +static struct uart_port *xuartps_get_port(int id) { struct uart_port *port; - int id; - /* Find the next unused port */ - for (id = 0; id < XUARTPS_NR_PORTS; id++) - if (xuartps_port[id].mapbase == 0) - break; + /* Try the given port id if failed use default method */ + if (xuartps_port[id].mapbase != 0) { + /* Find the next unused port */ + for (id = 0; id < XUARTPS_NR_PORTS; id++) + if (xuartps_port[id].mapbase == 0) + break; + } if (id >= XUARTPS_NR_PORTS) return NULL; @@ -1329,7 +1333,7 @@ static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume); */ static int xuartps_probe(struct platform_device *pdev) { - int rc; + int rc, id; struct uart_port *port; struct resource *res, *res2; struct xuartps *xuartps_data; @@ -1380,9 +1384,13 @@ static int xuartps_probe(struct platform_device *pdev) &xuartps_data->clk_rate_change_nb)) dev_warn(&pdev->dev, "Unable to register clock notifier.\n"); #endif + /* Look for a serialN alias */ + id = of_alias_get_id(pdev->dev.of_node, "serial"); + if (id < 0) + id = 0; /* Initialize the port structure */ - port = xuartps_get_port(); + port = xuartps_get_port(id); if (!port) { dev_err(&pdev->dev, "Cannot get uart_port structure\n"); -- cgit v1.2.3 From e555a21149806b21ae63ba0b02d42ce100db5639 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 17:23:39 -0700 Subject: tty: xuartps: Clean up This is all white space and comment clean up. Mostly reformatting comments. Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 210 +++++++++++++------------------------ 1 file changed, 74 insertions(+), 136 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 2cd0cd456c7a..787a12064fa0 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1,14 +1,13 @@ /* * Xilinx PS UART driver * - * 2011 - 2013 (C) Xilinx Inc. + * 2011 - 2014 (C) Xilinx Inc. * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General Public * License as published by the Free Software Foundation; * either version 2 of the License, or (at your option) any * later version. - * */ #if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -49,39 +48,27 @@ static int rx_timeout = 10; module_param(rx_timeout, uint, S_IRUGO); MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); -/********************************Register Map********************************/ -/** UART - * - * Register offsets for the UART. - * - */ -#define XUARTPS_CR_OFFSET 0x00 /* Control Register [8:0] */ -#define XUARTPS_MR_OFFSET 0x04 /* Mode Register [10:0] */ -#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable [10:0] */ -#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable [10:0] */ -#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask [10:0] */ -#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status [10:0]*/ -#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator [15:0] */ -#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout [7:0] */ -#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level [5:0] */ -#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control [5:0] */ -#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status [8:0] */ -#define XUARTPS_SR_OFFSET 0x2C /* Channel Status [11:0] */ -#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ -#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider [7:0] */ -#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay [15:0] */ -#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse - Width [15:0] */ -#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse - Width [7:0] */ -#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level [5:0] */ - -/** Control Register - * - * The Control register (CR) controls the major functions of the device. - * - * Control Register Bit Definitions - */ +/* Register offsets for the UART. */ +#define XUARTPS_CR_OFFSET 0x00 /* Control Register */ +#define XUARTPS_MR_OFFSET 0x04 /* Mode Register */ +#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable */ +#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable */ +#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask */ +#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status */ +#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */ +#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout */ +#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */ +#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control */ +#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status */ +#define XUARTPS_SR_OFFSET 0x2C /* Channel Status */ +#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO */ +#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */ +#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay */ +#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse Width */ +#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */ +#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */ + +/* Control Register Bit Definitions */ #define XUARTPS_CR_STOPBRK 0x00000100 /* Stop TX break */ #define XUARTPS_CR_STARTBRK 0x00000080 /* Set TX break */ #define XUARTPS_CR_TX_DIS 0x00000020 /* TX disabled. */ @@ -92,14 +79,11 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); #define XUARTPS_CR_RXRST 0x00000001 /* RX logic reset */ #define XUARTPS_CR_RST_TO 0x00000040 /* Restart Timeout Counter */ -/** Mode Register - * +/* + * Mode Register: * The mode register (MR) defines the mode of transfer as well as the data * format. If this register is modified during transmission or reception, * data validity cannot be guaranteed. - * - * Mode Register Bit Definitions - * */ #define XUARTPS_MR_CLKSEL 0x00000001 /* Pre-scalar selection */ #define XUARTPS_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */ @@ -118,8 +102,8 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); #define XUARTPS_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */ #define XUARTPS_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */ -/** Interrupt Registers - * +/* + * Interrupt Registers: * Interrupt control logic uses the interrupt enable register (IER) and the * interrupt disable register (IDR) to set the value of the bits in the * interrupt mask register (IMR). The IMR determines whether to pass an @@ -127,7 +111,6 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an * interrupt. IMR and ISR are read only, and IER and IDR are write only. * Reading either IER or IDR returns 0x00. - * * All four registers have the same bit definitions. */ #define XUARTPS_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */ @@ -145,8 +128,8 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); /* Goes in read_status_mask for break detection as the HW doesn't do it*/ #define XUARTPS_IXR_BRK 0x80000000 -/** Channel Status Register - * +/* + * Channel Status Register: * The channel status register (CSR) is provided to enable the control logic * to monitor the status of bits in the channel interrupt status register, * even if these are masked out by the interrupt mask register. @@ -205,7 +188,6 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) * error with all-zeros data as a break sequence. Most of the time, * there's another non-zero byte at the end of the sequence. */ - if (isrstatus & XUARTPS_IXR_FRAMING) { while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)) { @@ -264,8 +246,9 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) } else if (isrstatus & XUARTPS_IXR_FRAMING) { port->icount.frame++; status = TTY_FRAME; - } else if (isrstatus & XUARTPS_IXR_OVERRUN) + } else if (isrstatus & XUARTPS_IXR_OVERRUN) { port->icount.overrun++; + } uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN, data, status); @@ -300,7 +283,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) * the buffer if it reaches limit. */ port->state->xmit.tail = - (port->state->xmit.tail + 1) & \ + (port->state->xmit.tail + 1) & (UART_XMIT_SIZE - 1); } @@ -419,7 +402,7 @@ static unsigned int xuartps_set_baud_rate(struct uart_port *port, * @nb: Notifier block * @event: Notify event * @data: Notifier data - * Return: NOTIFY_OK on success, NOTIFY_BAD on error. + * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error. */ static int xuartps_clk_notifier_cb(struct notifier_block *nb, unsigned long event, void *data) @@ -438,8 +421,7 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, switch (event) { case PRE_RATE_CHANGE: { - u32 bdiv; - u32 cd; + u32 bdiv, cd; int div8; /* @@ -509,8 +491,6 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, } #endif -/*----------------------Uart Operations---------------------------*/ - /** * xuartps_start_tx - Start transmitting bytes * @port: Handle to the uart port structure @@ -529,9 +509,8 @@ static void xuartps_start_tx(struct uart_port *port) xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN, XUARTPS_CR_OFFSET); - while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET) - & XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) { - + while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET) & + XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) { /* Break if no more data available in the UART buffer */ if (uart_circ_empty(&port->state->xmit)) break; @@ -666,9 +645,7 @@ static void xuartps_set_termios(struct uart_port *port, if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); - /* - * Update the per-port timeout. - */ + /* Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); /* Set TX/RX Reset */ @@ -678,7 +655,8 @@ static void xuartps_set_termios(struct uart_port *port, ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - /* Clear the RX disable and TX disable bits and then set the TX enable + /* + * Clear the RX disable and TX disable bits and then set the TX enable * bit and RX enable bit to enable the transmitter and receiver. */ xuartps_writel( @@ -756,7 +734,7 @@ static void xuartps_set_termios(struct uart_port *port, * xuartps_startup - Called when an application opens a xuartps port * @port: Handle to the uart port structure * - * Return: 0 on success, negative error otherwise + * Return: 0 on success, negative errno otherwise */ static int xuartps_startup(struct uart_port *port) { @@ -850,7 +828,7 @@ static const char *xuartps_type(struct uart_port *port) * @port: Handle to the uart port structure * @ser: Handle to the structure whose members are compared * - * Return: 0 if success otherwise -EINVAL + * Return: 0 on success, negative errno otherwise. */ static int xuartps_verify_port(struct uart_port *port, struct serial_struct *ser) @@ -874,7 +852,7 @@ static int xuartps_verify_port(struct uart_port *port, * uart_add_one_port() * @port: Handle to the uart port structure * - * Return: 0, -ENOMEM if request fails + * Return: 0 on success, negative errno otherwise. */ static int xuartps_request_port(struct uart_port *port) { @@ -893,10 +871,11 @@ static int xuartps_request_port(struct uart_port *port) } /** - * xuartps_release_port - Release the memory region attached to a xuartps - * port, called when the driver removes a xuartps - * port via uart_remove_one_port(). + * xuartps_release_port - Release UART port * @port: Handle to the uart port structure + * + * Release the memory region attached to a xuartps port. Called when the + * driver removes a xuartps port via uart_remove_one_port(). */ static void xuartps_release_port(struct uart_port *port) { @@ -906,8 +885,7 @@ static void xuartps_release_port(struct uart_port *port) } /** - * xuartps_config_port - Configure xuartps, called when the driver adds a - * xuartps port + * xuartps_config_port - Configure UART port * @port: Handle to the uart port structure * @flags: If any */ @@ -919,7 +897,6 @@ static void xuartps_config_port(struct uart_port *port, int flags) /** * xuartps_get_mctrl - Get the modem control state - * * @port: Handle to the uart port structure * * Return: the modem control state @@ -987,38 +964,23 @@ static void xuartps_poll_put_char(struct uart_port *port, unsigned char c) } #endif -/** The UART operations structure - */ static struct uart_ops xuartps_ops = { .set_mctrl = xuartps_set_mctrl, .get_mctrl = xuartps_get_mctrl, .enable_ms = xuartps_enable_ms, - - .start_tx = xuartps_start_tx, /* Start transmitting */ - .stop_tx = xuartps_stop_tx, /* Stop transmission */ - .stop_rx = xuartps_stop_rx, /* Stop reception */ - .tx_empty = xuartps_tx_empty, /* Transmitter busy? */ - .break_ctl = xuartps_break_ctl, /* Start/stop - * transmitting break - */ - .set_termios = xuartps_set_termios, /* Set termios */ - .startup = xuartps_startup, /* App opens xuartps */ - .shutdown = xuartps_shutdown, /* App closes xuartps */ - .type = xuartps_type, /* Set UART type */ - .verify_port = xuartps_verify_port, /* Verification of port - * params - */ - .request_port = xuartps_request_port, /* Claim resources - * associated with a - * xuartps port - */ - .release_port = xuartps_release_port, /* Release resources - * associated with a - * xuartps port - */ - .config_port = xuartps_config_port, /* Configure when driver - * adds a xuartps port - */ + .start_tx = xuartps_start_tx, + .stop_tx = xuartps_stop_tx, + .stop_rx = xuartps_stop_rx, + .tx_empty = xuartps_tx_empty, + .break_ctl = xuartps_break_ctl, + .set_termios = xuartps_set_termios, + .startup = xuartps_startup, + .shutdown = xuartps_shutdown, + .type = xuartps_type, + .verify_port = xuartps_verify_port, + .request_port = xuartps_request_port, + .release_port = xuartps_release_port, + .config_port = xuartps_config_port, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = xuartps_poll_get_char, .poll_put_char = xuartps_poll_put_char, @@ -1028,9 +990,7 @@ static struct uart_ops xuartps_ops = { static struct uart_port xuartps_port[2]; /** - * xuartps_get_port - Configure the port from the platform device resource - * info - * + * xuartps_get_port - Configure the port from the platform device resource info * @id: Port id * * Return: a pointer to a uart_port or NULL for failure @@ -1067,8 +1027,6 @@ static struct uart_port *xuartps_get_port(int id) return port; } -/*-----------------------Console driver operations--------------------------*/ - #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE /** * xuartps_console_wait_tx - Wait for the TX to be full @@ -1144,7 +1102,7 @@ static void xuartps_console_write(struct console *co, const char *s, * @co: Console handle * @options: Initial settings of uart * - * Return: 0, -ENODEV if no device + * Return: 0 on success, negative errno otherwise. */ static int __init xuartps_console_setup(struct console *co, char *options) { @@ -1183,7 +1141,7 @@ static struct console xuartps_console = { /** * xuartps_console_init - Initialization call * - * Return: 0 on success, negative error otherwise + * Return: 0 on success, negative errno otherwise */ static int __init xuartps_console_init(void) { @@ -1195,17 +1153,15 @@ console_initcall(xuartps_console_init); #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */ -/** Structure Definitions - */ static struct uart_driver xuartps_uart_driver = { - .owner = THIS_MODULE, /* Owner */ - .driver_name = XUARTPS_NAME, /* Driver name */ - .dev_name = XUARTPS_TTY_NAME, /* Node name */ - .major = XUARTPS_MAJOR, /* Major number */ - .minor = XUARTPS_MINOR, /* Minor number */ - .nr = XUARTPS_NR_PORTS, /* Number of UART ports */ + .owner = THIS_MODULE, + .driver_name = XUARTPS_NAME, + .dev_name = XUARTPS_TTY_NAME, + .major = XUARTPS_MAJOR, + .minor = XUARTPS_MINOR, + .nr = XUARTPS_NR_PORTS, #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE - .cons = &xuartps_console, /* Console */ + .cons = &xuartps_console, #endif }; @@ -1322,14 +1278,11 @@ static int xuartps_resume(struct device *device) static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume); -/* --------------------------------------------------------------------- - * Platform bus binding - */ /** * xuartps_probe - Platform driver probe * @pdev: Pointer to the platform device structure * - * Return: 0 on success, negative error otherwise + * Return: 0 on success, negative errno otherwise */ static int xuartps_probe(struct platform_device *pdev) { @@ -1434,7 +1387,7 @@ err_out_clk_dis_aper: * xuartps_remove - called when the platform driver is unregistered * @pdev: Pointer to the platform device structure * - * Return: 0 on success, negative error otherwise + * Return: 0 on success, negative errno otherwise */ static int xuartps_remove(struct platform_device *pdev) { @@ -1462,24 +1415,16 @@ static struct of_device_id xuartps_of_match[] = { MODULE_DEVICE_TABLE(of, xuartps_of_match); static struct platform_driver xuartps_platform_driver = { - .probe = xuartps_probe, /* Probe method */ - .remove = xuartps_remove, /* Detach method */ + .probe = xuartps_probe, + .remove = xuartps_remove, .driver = { .owner = THIS_MODULE, - .name = XUARTPS_NAME, /* Driver name */ + .name = XUARTPS_NAME, .of_match_table = xuartps_of_match, .pm = &xuartps_dev_pm_ops, }, }; -/* --------------------------------------------------------------------- - * Module Init and Exit - */ -/** - * xuartps_init - Initial driver registration call - * - * Return: whether the registration was successful or not - */ static int __init xuartps_init(void) { int retval = 0; @@ -1497,15 +1442,8 @@ static int __init xuartps_init(void) return retval; } -/** - * xuartps_exit - Driver unregistration call - */ static void __exit xuartps_exit(void) { - /* The order of unregistration is important. Unregister the - * UART driver before the platform driver crashes the system. - */ - /* Unregister the platform driver */ platform_driver_unregister(&xuartps_platform_driver); -- cgit v1.2.3 From 5ce15d2d1efb9cacab9a331c730cc805124ee612 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 17:23:40 -0700 Subject: tty: xuartps: Print warning in clock notifier Print a warning if the clock notifier rejects a clock frequency change to facilitate debugging (see: http://thread.gmane.org/gmane.linux.ports.arm.kernel/304329/focus=304379) Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 787a12064fa0..814391038abb 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -429,8 +429,10 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, * frequency. */ if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud, - &bdiv, &cd, &div8)) + &bdiv, &cd, &div8)) { + dev_warn(port->dev, "clock rate change rejected\n"); return NOTIFY_BAD; + } spin_lock_irqsave(&xuartps->port->lock, flags); -- cgit v1.2.3 From 35dc5a538fb54bc30bdedf4c825da5c970b5ff90 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 17:23:41 -0700 Subject: tty: xuartps: Refactor read-modify-writes A lot of read-modify-write sequences used a one-line statement which nests a readl() within a writel(). Convert this into code sequences that make the three steps more obvious. Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 52 ++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 28 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 814391038abb..b182ab8cfd07 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -437,9 +437,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, spin_lock_irqsave(&xuartps->port->lock, flags); /* Disable the TX and RX to set baud rate */ - xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) | - (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS), - XUARTPS_CR_OFFSET); + ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); spin_unlock_irqrestore(&xuartps->port->lock, flags); @@ -464,9 +464,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, spin_lock_irqsave(&xuartps->port->lock, flags); /* Set TX/RX Reset */ - xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) | - (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST), - XUARTPS_CR_OFFSET); + ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); while (xuartps_readl(XUARTPS_CR_OFFSET) & (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST)) @@ -479,10 +479,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, */ xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - xuartps_writel( - (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) | - (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN), - XUARTPS_CR_OFFSET); + ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); + ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); spin_unlock_irqrestore(&xuartps->port->lock, flags); @@ -631,9 +630,9 @@ static void xuartps_set_termios(struct uart_port *port, } /* Disable the TX and RX to set baud rate */ - xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) | - (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS), - XUARTPS_CR_OFFSET); + ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); /* * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk @@ -651,20 +650,18 @@ static void xuartps_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); /* Set TX/RX Reset */ - xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) | - (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST), - XUARTPS_CR_OFFSET); - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); /* * Clear the RX disable and TX disable bits and then set the TX enable * bit and RX enable bit to enable the transmitter and receiver. */ - xuartps_writel( - (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) - | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN), - XUARTPS_CR_OFFSET); + ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); + ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); @@ -1248,9 +1245,9 @@ static int xuartps_resume(struct device *device) spin_lock_irqsave(&port->lock, flags); /* Set TX/RX Reset */ - xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) | - (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST), - XUARTPS_CR_OFFSET); + ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); + ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); while (xuartps_readl(XUARTPS_CR_OFFSET) & (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST)) cpu_relax(); @@ -1259,10 +1256,9 @@ static int xuartps_resume(struct device *device) xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); /* Enable Tx/Rx */ ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - xuartps_writel( - (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) | - (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN), - XUARTPS_CR_OFFSET); + ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); + ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; + xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); spin_unlock_irqrestore(&port->lock, flags); } else { -- cgit v1.2.3 From b494a5fae452fc43519872565892fa873f6ea4fb Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 17:23:42 -0700 Subject: tty: xuartps: Don't write IRQ disable register to enable interrupts A comment states, that, according to the data sheet, to enable interrupts the disable register should be written, but the enable register could be left untouched. And it suspsects a HW bug requiring to write both. Reviewing the data sheet, these statements seem wrong. Just as one would expect. Writing to the enable/disable register enables/disables interrupts. Hence the misleading comment and needless write to the disable register are removed from the enable sequence. Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/xilinx_uartps.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b182ab8cfd07..f9a2c2fc03c4 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1085,11 +1085,7 @@ static void xuartps_console_write(struct console *co, const char *s, xuartps_writel(ctrl, XUARTPS_CR_OFFSET); - /* restore interrupt state, it seems like there may be a h/w bug - * in that the interrupt enable register should not need to be - * written based on the data sheet - */ - xuartps_writel(~imr, XUARTPS_IDR_OFFSET); + /* restore interrupt state */ xuartps_writel(imr, XUARTPS_IER_OFFSET); if (locked) -- cgit v1.2.3 From d9bb3fb12685209765fd838bec69d701d7b479e5 Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Fri, 4 Apr 2014 17:23:43 -0700 Subject: tty: xuartps: Rebrand driver as Cadence UART Zynq's UART is Cadence IP. Make this visible in the prompt in kconfig and additional comments in the driver. This also renames functions and symbols, as far as possible without breaking user space API, to reflect the Cadence origin. This is achieved through simple search and replace: - s/XUARTPS/CDNS_UART/g - s/xuartps/cdns_uart/g The only exceptions are PORT_XUARTPS and the driver name, which stay as is, due to their exposure to user space. As well as the - no legacy - compatibility string 'xlnx,xuartps' Signed-off-by: Soren Brinkmann Tested-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 9 +- drivers/tty/serial/xilinx_uartps.c | 908 +++++++++++++++++++------------------ include/uapi/linux/serial_core.h | 2 +- 3 files changed, 471 insertions(+), 448 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5d9b01aa54f4..396cf8499947 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1369,18 +1369,19 @@ config SERIAL_MXS_AUART_CONSOLE Enable a MXS AUART port to be the system console. config SERIAL_XILINX_PS_UART - tristate "Xilinx PS UART support" + tristate "Cadence (Xilinx Zynq) UART support" depends on OF select SERIAL_CORE help - This driver supports the Xilinx PS UART port. + This driver supports the Cadence UART. It is found e.g. in Xilinx + Zynq. config SERIAL_XILINX_PS_UART_CONSOLE - bool "Xilinx PS UART console support" + bool "Cadence UART console support" depends on SERIAL_XILINX_PS_UART=y select SERIAL_CORE_CONSOLE help - Enable a Xilinx PS UART port to be the system console. + Enable a Cadence UART port to be the system console. config SERIAL_AR933X tristate "AR933X serial port support" diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index f9a2c2fc03c4..8809775e2ba3 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1,5 +1,5 @@ /* - * Xilinx PS UART driver + * Cadence UART driver (found in Xilinx Zynq) * * 2011 - 2014 (C) Xilinx Inc. * @@ -8,6 +8,10 @@ * License as published by the Free Software Foundation; * either version 2 of the License, or (at your option) any * later version. + * + * This driver has originally been pushed by Xilinx using a Zynq-branding. This + * still shows in the naming of this file, the kconfig symbols and some symbols + * in the code. */ #if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -27,16 +31,16 @@ #include #include -#define XUARTPS_TTY_NAME "ttyPS" -#define XUARTPS_NAME "xuartps" -#define XUARTPS_MAJOR 0 /* use dynamic node allocation */ -#define XUARTPS_MINOR 0 /* works best with devtmpfs */ -#define XUARTPS_NR_PORTS 2 -#define XUARTPS_FIFO_SIZE 64 /* FIFO size */ -#define XUARTPS_REGISTER_SPACE 0xFFF +#define CDNS_UART_TTY_NAME "ttyPS" +#define CDNS_UART_NAME "xuartps" +#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */ +#define CDNS_UART_MINOR 0 /* works best with devtmpfs */ +#define CDNS_UART_NR_PORTS 2 +#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */ +#define CDNS_UART_REGISTER_SPACE 0xFFF -#define xuartps_readl(offset) ioread32(port->membase + offset) -#define xuartps_writel(val, offset) iowrite32(val, port->membase + offset) +#define cdns_uart_readl(offset) ioread32(port->membase + offset) +#define cdns_uart_writel(val, offset) iowrite32(val, port->membase + offset) /* Rx Trigger level */ static int rx_trigger_level = 56; @@ -49,35 +53,35 @@ module_param(rx_timeout, uint, S_IRUGO); MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); /* Register offsets for the UART. */ -#define XUARTPS_CR_OFFSET 0x00 /* Control Register */ -#define XUARTPS_MR_OFFSET 0x04 /* Mode Register */ -#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable */ -#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable */ -#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask */ -#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status */ -#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */ -#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout */ -#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */ -#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control */ -#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status */ -#define XUARTPS_SR_OFFSET 0x2C /* Channel Status */ -#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO */ -#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */ -#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay */ -#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse Width */ -#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */ -#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */ +#define CDNS_UART_CR_OFFSET 0x00 /* Control Register */ +#define CDNS_UART_MR_OFFSET 0x04 /* Mode Register */ +#define CDNS_UART_IER_OFFSET 0x08 /* Interrupt Enable */ +#define CDNS_UART_IDR_OFFSET 0x0C /* Interrupt Disable */ +#define CDNS_UART_IMR_OFFSET 0x10 /* Interrupt Mask */ +#define CDNS_UART_ISR_OFFSET 0x14 /* Interrupt Status */ +#define CDNS_UART_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */ +#define CDNS_UART_RXTOUT_OFFSET 0x1C /* RX Timeout */ +#define CDNS_UART_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */ +#define CDNS_UART_MODEMCR_OFFSET 0x24 /* Modem Control */ +#define CDNS_UART_MODEMSR_OFFSET 0x28 /* Modem Status */ +#define CDNS_UART_SR_OFFSET 0x2C /* Channel Status */ +#define CDNS_UART_FIFO_OFFSET 0x30 /* FIFO */ +#define CDNS_UART_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */ +#define CDNS_UART_FLOWDEL_OFFSET 0x38 /* Flow Delay */ +#define CDNS_UART_IRRX_PWIDTH_OFFSET 0x3C /* IR Min Received Pulse Width */ +#define CDNS_UART_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */ +#define CDNS_UART_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */ /* Control Register Bit Definitions */ -#define XUARTPS_CR_STOPBRK 0x00000100 /* Stop TX break */ -#define XUARTPS_CR_STARTBRK 0x00000080 /* Set TX break */ -#define XUARTPS_CR_TX_DIS 0x00000020 /* TX disabled. */ -#define XUARTPS_CR_TX_EN 0x00000010 /* TX enabled */ -#define XUARTPS_CR_RX_DIS 0x00000008 /* RX disabled. */ -#define XUARTPS_CR_RX_EN 0x00000004 /* RX enabled */ -#define XUARTPS_CR_TXRST 0x00000002 /* TX logic reset */ -#define XUARTPS_CR_RXRST 0x00000001 /* RX logic reset */ -#define XUARTPS_CR_RST_TO 0x00000040 /* Restart Timeout Counter */ +#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */ +#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */ +#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */ +#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */ +#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */ +#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */ +#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */ +#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */ +#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */ /* * Mode Register: @@ -85,22 +89,22 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * format. If this register is modified during transmission or reception, * data validity cannot be guaranteed. */ -#define XUARTPS_MR_CLKSEL 0x00000001 /* Pre-scalar selection */ -#define XUARTPS_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */ -#define XUARTPS_MR_CHMODE_NORM 0x00000000 /* Normal mode */ +#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */ +#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */ +#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */ -#define XUARTPS_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */ -#define XUARTPS_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */ +#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */ +#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */ -#define XUARTPS_MR_PARITY_NONE 0x00000020 /* No parity mode */ -#define XUARTPS_MR_PARITY_MARK 0x00000018 /* Mark parity mode */ -#define XUARTPS_MR_PARITY_SPACE 0x00000010 /* Space parity mode */ -#define XUARTPS_MR_PARITY_ODD 0x00000008 /* Odd parity mode */ -#define XUARTPS_MR_PARITY_EVEN 0x00000000 /* Even parity mode */ +#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */ +#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */ +#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */ +#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */ +#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */ -#define XUARTPS_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */ -#define XUARTPS_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */ -#define XUARTPS_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */ +#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */ +#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */ +#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */ /* * Interrupt Registers: @@ -113,20 +117,20 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * Reading either IER or IDR returns 0x00. * All four registers have the same bit definitions. */ -#define XUARTPS_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */ -#define XUARTPS_IXR_PARITY 0x00000080 /* Parity error interrupt */ -#define XUARTPS_IXR_FRAMING 0x00000040 /* Framing error interrupt */ -#define XUARTPS_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */ -#define XUARTPS_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */ -#define XUARTPS_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */ -#define XUARTPS_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */ -#define XUARTPS_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */ -#define XUARTPS_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */ -#define XUARTPS_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */ -#define XUARTPS_IXR_MASK 0x00001FFF /* Valid bit mask */ +#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */ +#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */ +#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */ +#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */ +#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */ +#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */ +#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */ +#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */ +#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */ +#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */ +#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */ /* Goes in read_status_mask for break detection as the HW doesn't do it*/ -#define XUARTPS_IXR_BRK 0x80000000 +#define CDNS_UART_IXR_BRK 0x80000000 /* * Channel Status Register: @@ -134,41 +138,42 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); * to monitor the status of bits in the channel interrupt status register, * even if these are masked out by the interrupt mask register. */ -#define XUARTPS_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ -#define XUARTPS_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ -#define XUARTPS_SR_TXFULL 0x00000010 /* TX FIFO full */ -#define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */ +#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ +#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ +#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */ /* baud dividers min/max values */ -#define XUARTPS_BDIV_MIN 4 -#define XUARTPS_BDIV_MAX 255 -#define XUARTPS_CD_MAX 65535 +#define CDNS_UART_BDIV_MIN 4 +#define CDNS_UART_BDIV_MAX 255 +#define CDNS_UART_CD_MAX 65535 /** - * struct xuartps - device data + * struct cdns_uart - device data * @port: Pointer to the UART port - * @refclk: Reference clock - * @aperclk: APB clock + * @uartclk: Reference clock + * @pclk: APB clock * @baud: Current baud rate * @clk_rate_change_nb: Notifier block for clock changes */ -struct xuartps { +struct cdns_uart { struct uart_port *port; - struct clk *refclk; - struct clk *aperclk; + struct clk *uartclk; + struct clk *pclk; unsigned int baud; struct notifier_block clk_rate_change_nb; }; -#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb); +#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \ + clk_rate_change_nb); /** - * xuartps_isr - Interrupt handler + * cdns_uart_isr - Interrupt handler * @irq: Irq number * @dev_id: Id of the port * * Return: IRQHANDLED */ -static irqreturn_t xuartps_isr(int irq, void *dev_id) +static irqreturn_t cdns_uart_isr(int irq, void *dev_id) { struct uart_port *port = (struct uart_port *)dev_id; unsigned long flags; @@ -181,42 +186,42 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) /* Read the interrupt status register to determine which * interrupt(s) is/are active. */ - isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET); + isrstatus = cdns_uart_readl(CDNS_UART_ISR_OFFSET); /* * There is no hardware break detection, so we interpret framing * error with all-zeros data as a break sequence. Most of the time, * there's another non-zero byte at the end of the sequence. */ - if (isrstatus & XUARTPS_IXR_FRAMING) { - while (!(xuartps_readl(XUARTPS_SR_OFFSET) & - XUARTPS_SR_RXEMPTY)) { - if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) { - port->read_status_mask |= XUARTPS_IXR_BRK; - isrstatus &= ~XUARTPS_IXR_FRAMING; + if (isrstatus & CDNS_UART_IXR_FRAMING) { + while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_RXEMPTY)) { + if (!cdns_uart_readl(CDNS_UART_FIFO_OFFSET)) { + port->read_status_mask |= CDNS_UART_IXR_BRK; + isrstatus &= ~CDNS_UART_IXR_FRAMING; } } - xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_FRAMING, CDNS_UART_ISR_OFFSET); } /* drop byte with parity error if IGNPAR specified */ - if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY) - isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT); + if (isrstatus & port->ignore_status_mask & CDNS_UART_IXR_PARITY) + isrstatus &= ~(CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT); isrstatus &= port->read_status_mask; isrstatus &= ~port->ignore_status_mask; - if ((isrstatus & XUARTPS_IXR_TOUT) || - (isrstatus & XUARTPS_IXR_RXTRIG)) { + if ((isrstatus & CDNS_UART_IXR_TOUT) || + (isrstatus & CDNS_UART_IXR_RXTRIG)) { /* Receive Timeout Interrupt */ - while ((xuartps_readl(XUARTPS_SR_OFFSET) & - XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) { - data = xuartps_readl(XUARTPS_FIFO_OFFSET); + while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) { + data = cdns_uart_readl(CDNS_UART_FIFO_OFFSET); /* Non-NULL byte after BREAK is garbage (99%) */ if (data && (port->read_status_mask & - XUARTPS_IXR_BRK)) { - port->read_status_mask &= ~XUARTPS_IXR_BRK; + CDNS_UART_IXR_BRK)) { + port->read_status_mask &= ~CDNS_UART_IXR_BRK; port->icount.brk++; if (uart_handle_break(port)) continue; @@ -240,17 +245,17 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) port->icount.rx++; - if (isrstatus & XUARTPS_IXR_PARITY) { + if (isrstatus & CDNS_UART_IXR_PARITY) { port->icount.parity++; status = TTY_PARITY; - } else if (isrstatus & XUARTPS_IXR_FRAMING) { + } else if (isrstatus & CDNS_UART_IXR_FRAMING) { port->icount.frame++; status = TTY_FRAME; - } else if (isrstatus & XUARTPS_IXR_OVERRUN) { + } else if (isrstatus & CDNS_UART_IXR_OVERRUN) { port->icount.overrun++; } - uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN, + uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN, data, status); } spin_unlock(&port->lock); @@ -259,10 +264,10 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) } /* Dispatch an appropriate handler */ - if ((isrstatus & XUARTPS_IXR_TXEMPTY) == XUARTPS_IXR_TXEMPTY) { + if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) { if (uart_circ_empty(&port->state->xmit)) { - xuartps_writel(XUARTPS_IXR_TXEMPTY, - XUARTPS_IDR_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, + CDNS_UART_IDR_OFFSET); } else { numbytes = port->fifosize; /* Break if no more data available in the UART buffer */ @@ -270,12 +275,12 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) if (uart_circ_empty(&port->state->xmit)) break; /* Get the data from the UART circular buffer - * and write it to the xuartps's TX_FIFO + * and write it to the cdns_uart's TX_FIFO * register. */ - xuartps_writel( + cdns_uart_writel( port->state->xmit.buf[port->state->xmit. - tail], XUARTPS_FIFO_OFFSET); + tail], CDNS_UART_FIFO_OFFSET); port->icount.tx++; @@ -293,7 +298,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) } } - xuartps_writel(isrstatus, XUARTPS_ISR_OFFSET); + cdns_uart_writel(isrstatus, CDNS_UART_ISR_OFFSET); /* be sure to release the lock and tty before leaving */ spin_unlock_irqrestore(&port->lock, flags); @@ -302,7 +307,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) } /** - * xuartps_calc_baud_divs - Calculate baud rate divisors + * cdns_uart_calc_baud_divs - Calculate baud rate divisors * @clk: UART module input clock * @baud: Desired baud rate * @rbdiv: BDIV value (return value) @@ -321,8 +326,8 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id) * baud rate generate register * baud rate clock divisor register */ -static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud, - u32 *rbdiv, u32 *rcd, int *div8) +static unsigned int cdns_uart_calc_baud_divs(unsigned int clk, + unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8) { u32 cd, bdiv; unsigned int calc_baud; @@ -330,16 +335,16 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud, unsigned int bauderror; unsigned int besterror = ~0; - if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) { + if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) { *div8 = 1; clk /= 8; } else { *div8 = 0; } - for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) { + for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) { cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1)); - if (cd < 1 || cd > XUARTPS_CD_MAX) + if (cd < 1 || cd > CDNS_UART_CD_MAX) continue; calc_baud = clk / (cd * (bdiv + 1)); @@ -364,47 +369,47 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud, } /** - * xuartps_set_baud_rate - Calculate and set the baud rate + * cdns_uart_set_baud_rate - Calculate and set the baud rate * @port: Handle to the uart port structure * @baud: Baud rate to set * Return: baud rate, requested baud when possible, or actual baud when there * was too much error, zero if no valid divisors are found. */ -static unsigned int xuartps_set_baud_rate(struct uart_port *port, +static unsigned int cdns_uart_set_baud_rate(struct uart_port *port, unsigned int baud) { unsigned int calc_baud; u32 cd = 0, bdiv = 0; u32 mreg; int div8; - struct xuartps *xuartps = port->private_data; + struct cdns_uart *cdns_uart = port->private_data; - calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd, + calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd, &div8); /* Write new divisors to hardware */ - mreg = xuartps_readl(XUARTPS_MR_OFFSET); + mreg = cdns_uart_readl(CDNS_UART_MR_OFFSET); if (div8) - mreg |= XUARTPS_MR_CLKSEL; + mreg |= CDNS_UART_MR_CLKSEL; else - mreg &= ~XUARTPS_MR_CLKSEL; - xuartps_writel(mreg, XUARTPS_MR_OFFSET); - xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET); - xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET); - xuartps->baud = baud; + mreg &= ~CDNS_UART_MR_CLKSEL; + cdns_uart_writel(mreg, CDNS_UART_MR_OFFSET); + cdns_uart_writel(cd, CDNS_UART_BAUDGEN_OFFSET); + cdns_uart_writel(bdiv, CDNS_UART_BAUDDIV_OFFSET); + cdns_uart->baud = baud; return calc_baud; } #ifdef CONFIG_COMMON_CLK /** - * xuartps_clk_notitifer_cb - Clock notifier callback + * cdns_uart_clk_notitifer_cb - Clock notifier callback * @nb: Notifier block * @event: Notify event * @data: Notifier data * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error. */ -static int xuartps_clk_notifier_cb(struct notifier_block *nb, +static int cdns_uart_clk_notifier_cb(struct notifier_block *nb, unsigned long event, void *data) { u32 ctrl_reg; @@ -412,9 +417,9 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, int locked = 0; struct clk_notifier_data *ndata = data; unsigned long flags = 0; - struct xuartps *xuartps = to_xuartps(nb); + struct cdns_uart *cdns_uart = to_cdns_uart(nb); - port = xuartps->port; + port = cdns_uart->port; if (port->suspended) return NOTIFY_OK; @@ -428,20 +433,20 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, * Find out if current baud-rate can be achieved with new clock * frequency. */ - if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud, + if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud, &bdiv, &cd, &div8)) { dev_warn(port->dev, "clock rate change rejected\n"); return NOTIFY_BAD; } - spin_lock_irqsave(&xuartps->port->lock, flags); + spin_lock_irqsave(&cdns_uart->port->lock, flags); /* Disable the TX and RX to set baud rate */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); - spin_unlock_irqrestore(&xuartps->port->lock, flags); + spin_unlock_irqrestore(&cdns_uart->port->lock, flags); return NOTIFY_OK; } @@ -451,25 +456,25 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, * frequency. */ - spin_lock_irqsave(&xuartps->port->lock, flags); + spin_lock_irqsave(&cdns_uart->port->lock, flags); locked = 1; port->uartclk = ndata->new_rate; - xuartps->baud = xuartps_set_baud_rate(xuartps->port, - xuartps->baud); + cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port, + cdns_uart->baud); /* fall through */ case ABORT_RATE_CHANGE: if (!locked) - spin_lock_irqsave(&xuartps->port->lock, flags); + spin_lock_irqsave(&cdns_uart->port->lock, flags); /* Set TX/RX Reset */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); - while (xuartps_readl(XUARTPS_CR_OFFSET) & - (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST)) + while (cdns_uart_readl(CDNS_UART_CR_OFFSET) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) cpu_relax(); /* @@ -477,13 +482,13 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, * enable bit and RX enable bit to enable the transmitter and * receiver. */ - xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); - ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); - spin_unlock_irqrestore(&xuartps->port->lock, flags); + spin_unlock_irqrestore(&cdns_uart->port->lock, flags); return NOTIFY_OK; default: @@ -493,35 +498,35 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb, #endif /** - * xuartps_start_tx - Start transmitting bytes + * cdns_uart_start_tx - Start transmitting bytes * @port: Handle to the uart port structure */ -static void xuartps_start_tx(struct uart_port *port) +static void cdns_uart_start_tx(struct uart_port *port) { unsigned int status, numbytes = port->fifosize; if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port)) return; - status = xuartps_readl(XUARTPS_CR_OFFSET); + status = cdns_uart_readl(CDNS_UART_CR_OFFSET); /* Set the TX enable bit and clear the TX disable bit to enable the * transmitter. */ - xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN, - XUARTPS_CR_OFFSET); + cdns_uart_writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN, + CDNS_UART_CR_OFFSET); - while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET) & - XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) { + while (numbytes-- && ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) { /* Break if no more data available in the UART buffer */ if (uart_circ_empty(&port->state->xmit)) break; /* Get the data from the UART circular buffer and - * write it to the xuartps's TX_FIFO register. + * write it to the cdns_uart's TX_FIFO register. */ - xuartps_writel( + cdns_uart_writel( port->state->xmit.buf[port->state->xmit.tail], - XUARTPS_FIFO_OFFSET); + CDNS_UART_FIFO_OFFSET); port->icount.tx++; /* Adjust the tail of the UART buffer and wrap @@ -530,90 +535,90 @@ static void xuartps_start_tx(struct uart_port *port) port->state->xmit.tail = (port->state->xmit.tail + 1) & (UART_XMIT_SIZE - 1); } - xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_ISR_OFFSET); /* Enable the TX Empty interrupt */ - xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_IER_OFFSET); if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS) uart_write_wakeup(port); } /** - * xuartps_stop_tx - Stop TX + * cdns_uart_stop_tx - Stop TX * @port: Handle to the uart port structure */ -static void xuartps_stop_tx(struct uart_port *port) +static void cdns_uart_stop_tx(struct uart_port *port) { unsigned int regval; - regval = xuartps_readl(XUARTPS_CR_OFFSET); - regval |= XUARTPS_CR_TX_DIS; + regval = cdns_uart_readl(CDNS_UART_CR_OFFSET); + regval |= CDNS_UART_CR_TX_DIS; /* Disable the transmitter */ - xuartps_writel(regval, XUARTPS_CR_OFFSET); + cdns_uart_writel(regval, CDNS_UART_CR_OFFSET); } /** - * xuartps_stop_rx - Stop RX + * cdns_uart_stop_rx - Stop RX * @port: Handle to the uart port structure */ -static void xuartps_stop_rx(struct uart_port *port) +static void cdns_uart_stop_rx(struct uart_port *port) { unsigned int regval; - regval = xuartps_readl(XUARTPS_CR_OFFSET); - regval |= XUARTPS_CR_RX_DIS; + regval = cdns_uart_readl(CDNS_UART_CR_OFFSET); + regval |= CDNS_UART_CR_RX_DIS; /* Disable the receiver */ - xuartps_writel(regval, XUARTPS_CR_OFFSET); + cdns_uart_writel(regval, CDNS_UART_CR_OFFSET); } /** - * xuartps_tx_empty - Check whether TX is empty + * cdns_uart_tx_empty - Check whether TX is empty * @port: Handle to the uart port structure * * Return: TIOCSER_TEMT on success, 0 otherwise */ -static unsigned int xuartps_tx_empty(struct uart_port *port) +static unsigned int cdns_uart_tx_empty(struct uart_port *port) { unsigned int status; - status = xuartps_readl(XUARTPS_ISR_OFFSET) & XUARTPS_IXR_TXEMPTY; + status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY; return status ? TIOCSER_TEMT : 0; } /** - * xuartps_break_ctl - Based on the input ctl we have to start or stop + * cdns_uart_break_ctl - Based on the input ctl we have to start or stop * transmitting char breaks * @port: Handle to the uart port structure * @ctl: Value based on which start or stop decision is taken */ -static void xuartps_break_ctl(struct uart_port *port, int ctl) +static void cdns_uart_break_ctl(struct uart_port *port, int ctl) { unsigned int status; unsigned long flags; spin_lock_irqsave(&port->lock, flags); - status = xuartps_readl(XUARTPS_CR_OFFSET); + status = cdns_uart_readl(CDNS_UART_CR_OFFSET); if (ctl == -1) - xuartps_writel(XUARTPS_CR_STARTBRK | status, - XUARTPS_CR_OFFSET); + cdns_uart_writel(CDNS_UART_CR_STARTBRK | status, + CDNS_UART_CR_OFFSET); else { - if ((status & XUARTPS_CR_STOPBRK) == 0) - xuartps_writel(XUARTPS_CR_STOPBRK | status, - XUARTPS_CR_OFFSET); + if ((status & CDNS_UART_CR_STOPBRK) == 0) + cdns_uart_writel(CDNS_UART_CR_STOPBRK | status, + CDNS_UART_CR_OFFSET); } spin_unlock_irqrestore(&port->lock, flags); } /** - * xuartps_set_termios - termios operations, handling data length, parity, + * cdns_uart_set_termios - termios operations, handling data length, parity, * stop bits, flow control, baud rate * @port: Handle to the uart port structure * @termios: Handle to the input termios structure * @old: Values of the previously saved termios structure */ -static void xuartps_set_termios(struct uart_port *port, +static void cdns_uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned int cval = 0; @@ -624,25 +629,26 @@ static void xuartps_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); /* Empty the receive FIFO 1st before making changes */ - while ((xuartps_readl(XUARTPS_SR_OFFSET) & - XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) { - xuartps_readl(XUARTPS_FIFO_OFFSET); + while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) { + cdns_uart_readl(CDNS_UART_FIFO_OFFSET); } /* Disable the TX and RX to set baud rate */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg |= XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); /* * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk * min and max baud should be calculated here based on port->uartclk. * this way we get a valid baud and can safely call set_baud() */ - minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8); - maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1); + minbaud = port->uartclk / + ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8); + maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1); baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud); - baud = xuartps_set_baud_rate(port, baud); + baud = cdns_uart_set_baud_rate(port, baud); if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -650,52 +656,52 @@ static void xuartps_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); /* Set TX/RX Reset */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); /* * Clear the RX disable and TX disable bits and then set the TX enable * bit and RX enable bit to enable the transmitter and receiver. */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); - ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); - xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); + cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET); - port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG | - XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT; + port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT; port->ignore_status_mask = 0; if (termios->c_iflag & INPCK) - port->read_status_mask |= XUARTPS_IXR_PARITY | - XUARTPS_IXR_FRAMING; + port->read_status_mask |= CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING; if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= XUARTPS_IXR_PARITY | - XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN; + port->ignore_status_mask |= CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN; /* ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= XUARTPS_IXR_RXTRIG | - XUARTPS_IXR_TOUT | XUARTPS_IXR_PARITY | - XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN; + port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG | + CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN; - mode_reg = xuartps_readl(XUARTPS_MR_OFFSET); + mode_reg = cdns_uart_readl(CDNS_UART_MR_OFFSET); /* Handling Data Size */ switch (termios->c_cflag & CSIZE) { case CS6: - cval |= XUARTPS_MR_CHARLEN_6_BIT; + cval |= CDNS_UART_MR_CHARLEN_6_BIT; break; case CS7: - cval |= XUARTPS_MR_CHARLEN_7_BIT; + cval |= CDNS_UART_MR_CHARLEN_7_BIT; break; default: case CS8: - cval |= XUARTPS_MR_CHARLEN_8_BIT; + cval |= CDNS_UART_MR_CHARLEN_8_BIT; termios->c_cflag &= ~CSIZE; termios->c_cflag |= CS8; break; @@ -703,133 +709,135 @@ static void xuartps_set_termios(struct uart_port *port, /* Handling Parity and Stop Bits length */ if (termios->c_cflag & CSTOPB) - cval |= XUARTPS_MR_STOPMODE_2_BIT; /* 2 STOP bits */ + cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */ else - cval |= XUARTPS_MR_STOPMODE_1_BIT; /* 1 STOP bit */ + cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */ if (termios->c_cflag & PARENB) { /* Mark or Space parity */ if (termios->c_cflag & CMSPAR) { if (termios->c_cflag & PARODD) - cval |= XUARTPS_MR_PARITY_MARK; + cval |= CDNS_UART_MR_PARITY_MARK; else - cval |= XUARTPS_MR_PARITY_SPACE; + cval |= CDNS_UART_MR_PARITY_SPACE; } else { if (termios->c_cflag & PARODD) - cval |= XUARTPS_MR_PARITY_ODD; + cval |= CDNS_UART_MR_PARITY_ODD; else - cval |= XUARTPS_MR_PARITY_EVEN; + cval |= CDNS_UART_MR_PARITY_EVEN; } } else { - cval |= XUARTPS_MR_PARITY_NONE; + cval |= CDNS_UART_MR_PARITY_NONE; } cval |= mode_reg & 1; - xuartps_writel(cval, XUARTPS_MR_OFFSET); + cdns_uart_writel(cval, CDNS_UART_MR_OFFSET); spin_unlock_irqrestore(&port->lock, flags); } /** - * xuartps_startup - Called when an application opens a xuartps port + * cdns_uart_startup - Called when an application opens a cdns_uart port * @port: Handle to the uart port structure * * Return: 0 on success, negative errno otherwise */ -static int xuartps_startup(struct uart_port *port) +static int cdns_uart_startup(struct uart_port *port) { unsigned int retval = 0, status = 0; - retval = request_irq(port->irq, xuartps_isr, 0, XUARTPS_NAME, + retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, (void *)port); if (retval) return retval; /* Disable the TX and RX */ - xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS, - XUARTPS_CR_OFFSET); + cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS, + CDNS_UART_CR_OFFSET); /* Set the Control Register with TX/RX Enable, TX/RX Reset, * no break chars. */ - xuartps_writel(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST, - XUARTPS_CR_OFFSET); + cdns_uart_writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST, + CDNS_UART_CR_OFFSET); - status = xuartps_readl(XUARTPS_CR_OFFSET); + status = cdns_uart_readl(CDNS_UART_CR_OFFSET); /* Clear the RX disable and TX disable bits and then set the TX enable * bit and RX enable bit to enable the transmitter and receiver. */ - xuartps_writel((status & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) - | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN | - XUARTPS_CR_STOPBRK), XUARTPS_CR_OFFSET); + cdns_uart_writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS)) + | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN | + CDNS_UART_CR_STOPBRK), CDNS_UART_CR_OFFSET); /* Set the Mode Register with normal mode,8 data bits,1 stop bit, * no parity. */ - xuartps_writel(XUARTPS_MR_CHMODE_NORM | XUARTPS_MR_STOPMODE_1_BIT - | XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT, - XUARTPS_MR_OFFSET); + cdns_uart_writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT + | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT, + CDNS_UART_MR_OFFSET); /* * Set the RX FIFO Trigger level to use most of the FIFO, but it * can be tuned with a module parameter */ - xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET); + cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET); /* * Receive Timeout register is enabled but it * can be tuned with a module parameter */ - xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); + cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET); /* Clear out any pending interrupts before enabling them */ - xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET); + cdns_uart_writel(cdns_uart_readl(CDNS_UART_ISR_OFFSET), + CDNS_UART_ISR_OFFSET); /* Set the Interrupt Registers with desired interrupts */ - xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY | - XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN | - XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY | + CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN | + CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT, + CDNS_UART_IER_OFFSET); return retval; } /** - * xuartps_shutdown - Called when an application closes a xuartps port + * cdns_uart_shutdown - Called when an application closes a cdns_uart port * @port: Handle to the uart port structure */ -static void xuartps_shutdown(struct uart_port *port) +static void cdns_uart_shutdown(struct uart_port *port) { int status; /* Disable interrupts */ - status = xuartps_readl(XUARTPS_IMR_OFFSET); - xuartps_writel(status, XUARTPS_IDR_OFFSET); + status = cdns_uart_readl(CDNS_UART_IMR_OFFSET); + cdns_uart_writel(status, CDNS_UART_IDR_OFFSET); /* Disable the TX and RX */ - xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS, - XUARTPS_CR_OFFSET); + cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS, + CDNS_UART_CR_OFFSET); free_irq(port->irq, port); } /** - * xuartps_type - Set UART type to xuartps port + * cdns_uart_type - Set UART type to cdns_uart port * @port: Handle to the uart port structure * * Return: string on success, NULL otherwise */ -static const char *xuartps_type(struct uart_port *port) +static const char *cdns_uart_type(struct uart_port *port) { - return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL; + return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL; } /** - * xuartps_verify_port - Verify the port params + * cdns_uart_verify_port - Verify the port params * @port: Handle to the uart port structure * @ser: Handle to the structure whose members are compared * * Return: 0 on success, negative errno otherwise. */ -static int xuartps_verify_port(struct uart_port *port, +static int cdns_uart_verify_port(struct uart_port *port, struct serial_struct *ser) { if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS) @@ -846,170 +854,170 @@ static int xuartps_verify_port(struct uart_port *port, } /** - * xuartps_request_port - Claim the memory region attached to xuartps port, - * called when the driver adds a xuartps port via + * cdns_uart_request_port - Claim the memory region attached to cdns_uart port, + * called when the driver adds a cdns_uart port via * uart_add_one_port() * @port: Handle to the uart port structure * * Return: 0 on success, negative errno otherwise. */ -static int xuartps_request_port(struct uart_port *port) +static int cdns_uart_request_port(struct uart_port *port) { - if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE, - XUARTPS_NAME)) { + if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE, + CDNS_UART_NAME)) { return -ENOMEM; } - port->membase = ioremap(port->mapbase, XUARTPS_REGISTER_SPACE); + port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE); if (!port->membase) { dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE); + release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE); return -ENOMEM; } return 0; } /** - * xuartps_release_port - Release UART port + * cdns_uart_release_port - Release UART port * @port: Handle to the uart port structure * - * Release the memory region attached to a xuartps port. Called when the - * driver removes a xuartps port via uart_remove_one_port(). + * Release the memory region attached to a cdns_uart port. Called when the + * driver removes a cdns_uart port via uart_remove_one_port(). */ -static void xuartps_release_port(struct uart_port *port) +static void cdns_uart_release_port(struct uart_port *port) { - release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE); + release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE); iounmap(port->membase); port->membase = NULL; } /** - * xuartps_config_port - Configure UART port + * cdns_uart_config_port - Configure UART port * @port: Handle to the uart port structure * @flags: If any */ -static void xuartps_config_port(struct uart_port *port, int flags) +static void cdns_uart_config_port(struct uart_port *port, int flags) { - if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0) + if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0) port->type = PORT_XUARTPS; } /** - * xuartps_get_mctrl - Get the modem control state + * cdns_uart_get_mctrl - Get the modem control state * @port: Handle to the uart port structure * * Return: the modem control state */ -static unsigned int xuartps_get_mctrl(struct uart_port *port) +static unsigned int cdns_uart_get_mctrl(struct uart_port *port) { return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; } -static void xuartps_set_mctrl(struct uart_port *port, unsigned int mctrl) +static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { /* N/A */ } -static void xuartps_enable_ms(struct uart_port *port) +static void cdns_uart_enable_ms(struct uart_port *port) { /* N/A */ } #ifdef CONFIG_CONSOLE_POLL -static int xuartps_poll_get_char(struct uart_port *port) +static int cdns_uart_poll_get_char(struct uart_port *port) { u32 imr; int c; /* Disable all interrupts */ - imr = xuartps_readl(XUARTPS_IMR_OFFSET); - xuartps_writel(imr, XUARTPS_IDR_OFFSET); + imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET); /* Check if FIFO is empty */ - if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY) + if (cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY) c = NO_POLL_CHAR; else /* Read a character */ - c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET); + c = (unsigned char) cdns_uart_readl(CDNS_UART_FIFO_OFFSET); /* Enable interrupts */ - xuartps_writel(imr, XUARTPS_IER_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IER_OFFSET); return c; } -static void xuartps_poll_put_char(struct uart_port *port, unsigned char c) +static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c) { u32 imr; /* Disable all interrupts */ - imr = xuartps_readl(XUARTPS_IMR_OFFSET); - xuartps_writel(imr, XUARTPS_IDR_OFFSET); + imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET); /* Wait until FIFO is empty */ - while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)) + while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)) cpu_relax(); /* Write a character */ - xuartps_writel(c, XUARTPS_FIFO_OFFSET); + cdns_uart_writel(c, CDNS_UART_FIFO_OFFSET); /* Wait until FIFO is empty */ - while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)) + while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)) cpu_relax(); /* Enable interrupts */ - xuartps_writel(imr, XUARTPS_IER_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IER_OFFSET); return; } #endif -static struct uart_ops xuartps_ops = { - .set_mctrl = xuartps_set_mctrl, - .get_mctrl = xuartps_get_mctrl, - .enable_ms = xuartps_enable_ms, - .start_tx = xuartps_start_tx, - .stop_tx = xuartps_stop_tx, - .stop_rx = xuartps_stop_rx, - .tx_empty = xuartps_tx_empty, - .break_ctl = xuartps_break_ctl, - .set_termios = xuartps_set_termios, - .startup = xuartps_startup, - .shutdown = xuartps_shutdown, - .type = xuartps_type, - .verify_port = xuartps_verify_port, - .request_port = xuartps_request_port, - .release_port = xuartps_release_port, - .config_port = xuartps_config_port, +static struct uart_ops cdns_uart_ops = { + .set_mctrl = cdns_uart_set_mctrl, + .get_mctrl = cdns_uart_get_mctrl, + .enable_ms = cdns_uart_enable_ms, + .start_tx = cdns_uart_start_tx, + .stop_tx = cdns_uart_stop_tx, + .stop_rx = cdns_uart_stop_rx, + .tx_empty = cdns_uart_tx_empty, + .break_ctl = cdns_uart_break_ctl, + .set_termios = cdns_uart_set_termios, + .startup = cdns_uart_startup, + .shutdown = cdns_uart_shutdown, + .type = cdns_uart_type, + .verify_port = cdns_uart_verify_port, + .request_port = cdns_uart_request_port, + .release_port = cdns_uart_release_port, + .config_port = cdns_uart_config_port, #ifdef CONFIG_CONSOLE_POLL - .poll_get_char = xuartps_poll_get_char, - .poll_put_char = xuartps_poll_put_char, + .poll_get_char = cdns_uart_poll_get_char, + .poll_put_char = cdns_uart_poll_put_char, #endif }; -static struct uart_port xuartps_port[2]; +static struct uart_port cdns_uart_port[2]; /** - * xuartps_get_port - Configure the port from the platform device resource info + * cdns_uart_get_port - Configure the port from platform device resource info * @id: Port id * * Return: a pointer to a uart_port or NULL for failure */ -static struct uart_port *xuartps_get_port(int id) +static struct uart_port *cdns_uart_get_port(int id) { struct uart_port *port; /* Try the given port id if failed use default method */ - if (xuartps_port[id].mapbase != 0) { + if (cdns_uart_port[id].mapbase != 0) { /* Find the next unused port */ - for (id = 0; id < XUARTPS_NR_PORTS; id++) - if (xuartps_port[id].mapbase == 0) + for (id = 0; id < CDNS_UART_NR_PORTS; id++) + if (cdns_uart_port[id].mapbase == 0) break; } - if (id >= XUARTPS_NR_PORTS) + if (id >= CDNS_UART_NR_PORTS) return NULL; - port = &xuartps_port[id]; + port = &cdns_uart_port[id]; /* At this point, we've got an empty uart_port struct, initialize it */ spin_lock_init(&port->lock); @@ -1019,8 +1027,8 @@ static struct uart_port *xuartps_get_port(int id) port->type = PORT_UNKNOWN; port->iotype = UPIO_MEM32; port->flags = UPF_BOOT_AUTOCONF; - port->ops = &xuartps_ops; - port->fifosize = XUARTPS_FIFO_SIZE; + port->ops = &cdns_uart_ops; + port->fifosize = CDNS_UART_FIFO_SIZE; port->line = id; port->dev = NULL; return port; @@ -1028,37 +1036,37 @@ static struct uart_port *xuartps_get_port(int id) #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE /** - * xuartps_console_wait_tx - Wait for the TX to be full + * cdns_uart_console_wait_tx - Wait for the TX to be full * @port: Handle to the uart port structure */ -static void xuartps_console_wait_tx(struct uart_port *port) +static void cdns_uart_console_wait_tx(struct uart_port *port) { - while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY) - != XUARTPS_SR_TXEMPTY) + while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY) + != CDNS_UART_SR_TXEMPTY) barrier(); } /** - * xuartps_console_putchar - write the character to the FIFO buffer + * cdns_uart_console_putchar - write the character to the FIFO buffer * @port: Handle to the uart port structure * @ch: Character to be written */ -static void xuartps_console_putchar(struct uart_port *port, int ch) +static void cdns_uart_console_putchar(struct uart_port *port, int ch) { - xuartps_console_wait_tx(port); - xuartps_writel(ch, XUARTPS_FIFO_OFFSET); + cdns_uart_console_wait_tx(port); + cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET); } /** - * xuartps_console_write - perform write operation + * cdns_uart_console_write - perform write operation * @co: Console handle * @s: Pointer to character array * @count: No of characters */ -static void xuartps_console_write(struct console *co, const char *s, +static void cdns_uart_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_port *port = &xuartps_port[co->index]; + struct uart_port *port = &cdns_uart_port[co->index]; unsigned long flags; unsigned int imr, ctrl; int locked = 1; @@ -1069,45 +1077,45 @@ static void xuartps_console_write(struct console *co, const char *s, spin_lock_irqsave(&port->lock, flags); /* save and disable interrupt */ - imr = xuartps_readl(XUARTPS_IMR_OFFSET); - xuartps_writel(imr, XUARTPS_IDR_OFFSET); + imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET); /* * Make sure that the tx part is enabled. Set the TX enable bit and * clear the TX disable bit to enable the transmitter. */ - ctrl = xuartps_readl(XUARTPS_CR_OFFSET); - xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN, - XUARTPS_CR_OFFSET); + ctrl = cdns_uart_readl(CDNS_UART_CR_OFFSET); + cdns_uart_writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN, + CDNS_UART_CR_OFFSET); - uart_console_write(port, s, count, xuartps_console_putchar); - xuartps_console_wait_tx(port); + uart_console_write(port, s, count, cdns_uart_console_putchar); + cdns_uart_console_wait_tx(port); - xuartps_writel(ctrl, XUARTPS_CR_OFFSET); + cdns_uart_writel(ctrl, CDNS_UART_CR_OFFSET); /* restore interrupt state */ - xuartps_writel(imr, XUARTPS_IER_OFFSET); + cdns_uart_writel(imr, CDNS_UART_IER_OFFSET); if (locked) spin_unlock_irqrestore(&port->lock, flags); } /** - * xuartps_console_setup - Initialize the uart to default config + * cdns_uart_console_setup - Initialize the uart to default config * @co: Console handle * @options: Initial settings of uart * * Return: 0 on success, negative errno otherwise. */ -static int __init xuartps_console_setup(struct console *co, char *options) +static int __init cdns_uart_console_setup(struct console *co, char *options) { - struct uart_port *port = &xuartps_port[co->index]; + struct uart_port *port = &cdns_uart_port[co->index]; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; - if (co->index < 0 || co->index >= XUARTPS_NR_PORTS) + if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS) return -EINVAL; if (!port->mapbase) { @@ -1121,53 +1129,53 @@ static int __init xuartps_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct uart_driver xuartps_uart_driver; +static struct uart_driver cdns_uart_uart_driver; -static struct console xuartps_console = { - .name = XUARTPS_TTY_NAME, - .write = xuartps_console_write, +static struct console cdns_uart_console = { + .name = CDNS_UART_TTY_NAME, + .write = cdns_uart_console_write, .device = uart_console_device, - .setup = xuartps_console_setup, + .setup = cdns_uart_console_setup, .flags = CON_PRINTBUFFER, .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */ - .data = &xuartps_uart_driver, + .data = &cdns_uart_uart_driver, }; /** - * xuartps_console_init - Initialization call + * cdns_uart_console_init - Initialization call * * Return: 0 on success, negative errno otherwise */ -static int __init xuartps_console_init(void) +static int __init cdns_uart_console_init(void) { - register_console(&xuartps_console); + register_console(&cdns_uart_console); return 0; } -console_initcall(xuartps_console_init); +console_initcall(cdns_uart_console_init); #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */ -static struct uart_driver xuartps_uart_driver = { +static struct uart_driver cdns_uart_uart_driver = { .owner = THIS_MODULE, - .driver_name = XUARTPS_NAME, - .dev_name = XUARTPS_TTY_NAME, - .major = XUARTPS_MAJOR, - .minor = XUARTPS_MINOR, - .nr = XUARTPS_NR_PORTS, + .driver_name = CDNS_UART_NAME, + .dev_name = CDNS_UART_TTY_NAME, + .major = CDNS_UART_MAJOR, + .minor = CDNS_UART_MINOR, + .nr = CDNS_UART_NR_PORTS, #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE - .cons = &xuartps_console, + .cons = &cdns_uart_console, #endif }; #ifdef CONFIG_PM_SLEEP /** - * xuartps_suspend - suspend event + * cdns_uart_suspend - suspend event * @device: Pointer to the device structure * * Return: 0 */ -static int xuartps_suspend(struct device *device) +static int cdns_uart_suspend(struct device *device) { struct uart_port *port = dev_get_drvdata(device); struct tty_struct *tty; @@ -1186,23 +1194,24 @@ static int xuartps_suspend(struct device *device) * Call the API provided in serial_core.c file which handles * the suspend. */ - uart_suspend_port(&xuartps_uart_driver, port); + uart_suspend_port(&cdns_uart_uart_driver, port); if (console_suspend_enabled && !may_wake) { - struct xuartps *xuartps = port->private_data; + struct cdns_uart *cdns_uart = port->private_data; - clk_disable(xuartps->refclk); - clk_disable(xuartps->aperclk); + clk_disable(cdns_uart->uartclk); + clk_disable(cdns_uart->pclk); } else { unsigned long flags = 0; spin_lock_irqsave(&port->lock, flags); /* Empty the receive FIFO 1st before making changes */ - while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)) - xuartps_readl(XUARTPS_FIFO_OFFSET); + while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & + CDNS_UART_SR_RXEMPTY)) + cdns_uart_readl(CDNS_UART_FIFO_OFFSET); /* set RX trigger level to 1 */ - xuartps_writel(1, XUARTPS_RXWM_OFFSET); + cdns_uart_writel(1, CDNS_UART_RXWM_OFFSET); /* disable RX timeout interrups */ - xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IDR_OFFSET); spin_unlock_irqrestore(&port->lock, flags); } @@ -1210,12 +1219,12 @@ static int xuartps_suspend(struct device *device) } /** - * xuartps_resume - Resume after a previous suspend + * cdns_uart_resume - Resume after a previous suspend * @device: Pointer to the device structure * * Return: 0 */ -static int xuartps_resume(struct device *device) +static int cdns_uart_resume(struct device *device) { struct uart_port *port = dev_get_drvdata(device); unsigned long flags = 0; @@ -1233,83 +1242,95 @@ static int xuartps_resume(struct device *device) } if (console_suspend_enabled && !may_wake) { - struct xuartps *xuartps = port->private_data; + struct cdns_uart *cdns_uart = port->private_data; - clk_enable(xuartps->aperclk); - clk_enable(xuartps->refclk); + clk_enable(cdns_uart->pclk); + clk_enable(cdns_uart->uartclk); spin_lock_irqsave(&port->lock, flags); /* Set TX/RX Reset */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg |= XUARTPS_CR_TXRST | XUARTPS_CR_RXRST; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); - while (xuartps_readl(XUARTPS_CR_OFFSET) & - (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST)) + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); + while (cdns_uart_readl(CDNS_UART_CR_OFFSET) & + (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST)) cpu_relax(); /* restore rx timeout value */ - xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET); + cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET); /* Enable Tx/Rx */ - ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET); - ctrl_reg &= ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS); - ctrl_reg |= XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN; - xuartps_writel(ctrl_reg, XUARTPS_CR_OFFSET); + ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET); + ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS); + ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN; + cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET); spin_unlock_irqrestore(&port->lock, flags); } else { spin_lock_irqsave(&port->lock, flags); /* restore original rx trigger level */ - xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET); + cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET); /* enable RX timeout interrupt */ - xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET); + cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IER_OFFSET); spin_unlock_irqrestore(&port->lock, flags); } - return uart_resume_port(&xuartps_uart_driver, port); + return uart_resume_port(&cdns_uart_uart_driver, port); } #endif /* ! CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume); +static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend, + cdns_uart_resume); /** - * xuartps_probe - Platform driver probe + * cdns_uart_probe - Platform driver probe * @pdev: Pointer to the platform device structure * * Return: 0 on success, negative errno otherwise */ -static int xuartps_probe(struct platform_device *pdev) +static int cdns_uart_probe(struct platform_device *pdev) { int rc, id; struct uart_port *port; struct resource *res, *res2; - struct xuartps *xuartps_data; + struct cdns_uart *cdns_uart_data; - xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data), + cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data), GFP_KERNEL); - if (!xuartps_data) + if (!cdns_uart_data) return -ENOMEM; - xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk"); - if (IS_ERR(xuartps_data->aperclk)) { - dev_err(&pdev->dev, "aper_clk clock not found.\n"); - return PTR_ERR(xuartps_data->aperclk); + cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(cdns_uart_data->pclk)) { + cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk"); + if (!IS_ERR(cdns_uart_data->pclk)) + dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n"); + } + if (IS_ERR(cdns_uart_data->pclk)) { + dev_err(&pdev->dev, "pclk clock not found.\n"); + return PTR_ERR(cdns_uart_data->pclk); + } + + cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk"); + if (IS_ERR(cdns_uart_data->uartclk)) { + cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk"); + if (!IS_ERR(cdns_uart_data->uartclk)) + dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n"); } - xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk"); - if (IS_ERR(xuartps_data->refclk)) { - dev_err(&pdev->dev, "ref_clk clock not found.\n"); - return PTR_ERR(xuartps_data->refclk); + if (IS_ERR(cdns_uart_data->uartclk)) { + dev_err(&pdev->dev, "uart_clk clock not found.\n"); + return PTR_ERR(cdns_uart_data->uartclk); } - rc = clk_prepare_enable(xuartps_data->aperclk); + rc = clk_prepare_enable(cdns_uart_data->pclk); if (rc) { - dev_err(&pdev->dev, "Unable to enable APER clock.\n"); + dev_err(&pdev->dev, "Unable to enable pclk clock.\n"); return rc; } - rc = clk_prepare_enable(xuartps_data->refclk); + rc = clk_prepare_enable(cdns_uart_data->uartclk); if (rc) { dev_err(&pdev->dev, "Unable to enable device clock.\n"); - goto err_out_clk_dis_aper; + goto err_out_clk_dis_pclk; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1325,10 +1346,10 @@ static int xuartps_probe(struct platform_device *pdev) } #ifdef CONFIG_COMMON_CLK - xuartps_data->clk_rate_change_nb.notifier_call = - xuartps_clk_notifier_cb; - if (clk_notifier_register(xuartps_data->refclk, - &xuartps_data->clk_rate_change_nb)) + cdns_uart_data->clk_rate_change_nb.notifier_call = + cdns_uart_clk_notifier_cb; + if (clk_notifier_register(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb)) dev_warn(&pdev->dev, "Unable to register clock notifier.\n"); #endif /* Look for a serialN alias */ @@ -1337,7 +1358,7 @@ static int xuartps_probe(struct platform_device *pdev) id = 0; /* Initialize the port structure */ - port = xuartps_get_port(id); + port = cdns_uart_get_port(id); if (!port) { dev_err(&pdev->dev, "Cannot get uart_port structure\n"); @@ -1351,11 +1372,11 @@ static int xuartps_probe(struct platform_device *pdev) port->mapbase = res->start; port->irq = res2->start; port->dev = &pdev->dev; - port->uartclk = clk_get_rate(xuartps_data->refclk); - port->private_data = xuartps_data; - xuartps_data->port = port; + port->uartclk = clk_get_rate(cdns_uart_data->uartclk); + port->private_data = cdns_uart_data; + cdns_uart_data->port = port; platform_set_drvdata(pdev, port); - rc = uart_add_one_port(&xuartps_uart_driver, port); + rc = uart_add_one_port(&cdns_uart_uart_driver, port); if (rc) { dev_err(&pdev->dev, "uart_add_one_port() failed; err=%i\n", rc); @@ -1366,88 +1387,89 @@ static int xuartps_probe(struct platform_device *pdev) err_out_notif_unreg: #ifdef CONFIG_COMMON_CLK - clk_notifier_unregister(xuartps_data->refclk, - &xuartps_data->clk_rate_change_nb); + clk_notifier_unregister(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb); #endif err_out_clk_disable: - clk_disable_unprepare(xuartps_data->refclk); -err_out_clk_dis_aper: - clk_disable_unprepare(xuartps_data->aperclk); + clk_disable_unprepare(cdns_uart_data->uartclk); +err_out_clk_dis_pclk: + clk_disable_unprepare(cdns_uart_data->pclk); return rc; } /** - * xuartps_remove - called when the platform driver is unregistered + * cdns_uart_remove - called when the platform driver is unregistered * @pdev: Pointer to the platform device structure * * Return: 0 on success, negative errno otherwise */ -static int xuartps_remove(struct platform_device *pdev) +static int cdns_uart_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); - struct xuartps *xuartps_data = port->private_data; + struct cdns_uart *cdns_uart_data = port->private_data; int rc; - /* Remove the xuartps port from the serial core */ + /* Remove the cdns_uart port from the serial core */ #ifdef CONFIG_COMMON_CLK - clk_notifier_unregister(xuartps_data->refclk, - &xuartps_data->clk_rate_change_nb); + clk_notifier_unregister(cdns_uart_data->uartclk, + &cdns_uart_data->clk_rate_change_nb); #endif - rc = uart_remove_one_port(&xuartps_uart_driver, port); + rc = uart_remove_one_port(&cdns_uart_uart_driver, port); port->mapbase = 0; - clk_disable_unprepare(xuartps_data->refclk); - clk_disable_unprepare(xuartps_data->aperclk); + clk_disable_unprepare(cdns_uart_data->uartclk); + clk_disable_unprepare(cdns_uart_data->pclk); return rc; } /* Match table for of_platform binding */ -static struct of_device_id xuartps_of_match[] = { +static struct of_device_id cdns_uart_of_match[] = { { .compatible = "xlnx,xuartps", }, + { .compatible = "cdns,uart-r1p8", }, {} }; -MODULE_DEVICE_TABLE(of, xuartps_of_match); +MODULE_DEVICE_TABLE(of, cdns_uart_of_match); -static struct platform_driver xuartps_platform_driver = { - .probe = xuartps_probe, - .remove = xuartps_remove, +static struct platform_driver cdns_uart_platform_driver = { + .probe = cdns_uart_probe, + .remove = cdns_uart_remove, .driver = { .owner = THIS_MODULE, - .name = XUARTPS_NAME, - .of_match_table = xuartps_of_match, - .pm = &xuartps_dev_pm_ops, + .name = CDNS_UART_NAME, + .of_match_table = cdns_uart_of_match, + .pm = &cdns_uart_dev_pm_ops, }, }; -static int __init xuartps_init(void) +static int __init cdns_uart_init(void) { int retval = 0; - /* Register the xuartps driver with the serial core */ - retval = uart_register_driver(&xuartps_uart_driver); + /* Register the cdns_uart driver with the serial core */ + retval = uart_register_driver(&cdns_uart_uart_driver); if (retval) return retval; /* Register the platform driver */ - retval = platform_driver_register(&xuartps_platform_driver); + retval = platform_driver_register(&cdns_uart_platform_driver); if (retval) - uart_unregister_driver(&xuartps_uart_driver); + uart_unregister_driver(&cdns_uart_uart_driver); return retval; } -static void __exit xuartps_exit(void) +static void __exit cdns_uart_exit(void) { /* Unregister the platform driver */ - platform_driver_unregister(&xuartps_platform_driver); + platform_driver_unregister(&cdns_uart_platform_driver); - /* Unregister the xuartps driver */ - uart_unregister_driver(&xuartps_uart_driver); + /* Unregister the cdns_uart driver */ + uart_unregister_driver(&cdns_uart_uart_driver); } -module_init(xuartps_init); -module_exit(xuartps_exit); +module_init(cdns_uart_init); +module_exit(cdns_uart_exit); -MODULE_DESCRIPTION("Driver for PS UART"); +MODULE_DESCRIPTION("Driver for Cadence UART"); MODULE_AUTHOR("Xilinx Inc."); MODULE_LICENSE("GPL"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index b47dba2c1e6f..22aaf8ed7735 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -211,7 +211,7 @@ /* VIA VT8500 SoC */ #define PORT_VT8500 97 -/* Xilinx PSS UART */ +/* Cadence (Xilinx Zynq) UART */ #define PORT_XUARTPS 98 /* Atheros AR933X SoC */ -- cgit v1.2.3 From e264ebf4c81ac733642ed03ee3f0e26914ed3714 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Thu, 17 Apr 2014 15:47:58 +0200 Subject: tty: serial: Add driver for MEN's 16z135 High Speed UART. Add driver for MEN's 16z135 High Speed UART. The 16z135 is a memory mapped UART Core on an MCB FPGA and has 1024 byte deep FIFO buffers for the RX and TX path. It also has configurable FIFO fill level IRQs and data copied to and from the hardware has to be acknowledged. Signed-off-by: Johannes Thumshirn Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 10 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/men_z135_uart.c | 866 +++++++++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 4 files changed, 880 insertions(+) create mode 100644 drivers/tty/serial/men_z135_uart.c (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 396cf8499947..30530e47cdf0 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1509,6 +1509,16 @@ config SERIAL_ST_ASC_CONSOLE depends on SERIAL_ST_ASC=y select SERIAL_CORE_CONSOLE +config SERIAL_MEN_Z135 + tristate "MEN 16z135 Support" + depends on MCB + help + Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core + on a MCB carrier. + + This driver can also be build as a module. If so, the module will be called + men_z135_uart.ko + endmenu endif # TTY diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 3680854fef41..5f2a3f493ab9 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -87,3 +87,4 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o obj-$(CONFIG_SERIAL_ARC) += arc_uart.o obj-$(CONFIG_SERIAL_RP2) += rp2.o obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o +obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c new file mode 100644 index 000000000000..d08eb5d8330d --- /dev/null +++ b/drivers/tty/serial/men_z135_uart.c @@ -0,0 +1,866 @@ +/* + * MEN 16z135 High Speed UART + * + * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de) + * Author: Johannes Thumshirn + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEN_Z135_MAX_PORTS 12 +#define MEN_Z135_BASECLK 29491200 +#define MEN_Z135_FIFO_SIZE 1024 +#define MEN_Z135_NUM_MSI_VECTORS 2 +#define MEN_Z135_FIFO_WATERMARK 1020 + +#define MEN_Z135_STAT_REG 0x0 +#define MEN_Z135_RX_RAM 0x4 +#define MEN_Z135_TX_RAM 0x400 +#define MEN_Z135_RX_CTRL 0x800 +#define MEN_Z135_TX_CTRL 0x804 +#define MEN_Z135_CONF_REG 0x808 +#define MEN_Z135_UART_FREQ 0x80c +#define MEN_Z135_BAUD_REG 0x810 +#define MENZ135_TIMEOUT 0x814 + +#define MEN_Z135_MEM_SIZE 0x818 + +#define IS_IRQ(x) ((x) & 1) +#define IRQ_ID(x) (((x) >> 1) & 7) + +#define MEN_Z135_IER_RXCIEN BIT(0) /* TX Space IRQ */ +#define MEN_Z135_IER_TXCIEN BIT(1) /* RX Space IRQ */ +#define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */ +#define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */ +#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \ + | MEN_Z135_IER_RLSIEN \ + | MEN_Z135_IER_MSIEN \ + | MEN_Z135_IER_TXCIEN) + +#define MEN_Z135_MCR_DTR BIT(24) +#define MEN_Z135_MCR_RTS BIT(25) +#define MEN_Z135_MCR_OUT1 BIT(26) +#define MEN_Z135_MCR_OUT2 BIT(27) +#define MEN_Z135_MCR_LOOP BIT(28) +#define MEN_Z135_MCR_RCFC BIT(29) + +#define MEN_Z135_MSR_DCTS BIT(0) +#define MEN_Z135_MSR_DDSR BIT(1) +#define MEN_Z135_MSR_DRI BIT(2) +#define MEN_Z135_MSR_DDCD BIT(3) +#define MEN_Z135_MSR_CTS BIT(4) +#define MEN_Z135_MSR_DSR BIT(5) +#define MEN_Z135_MSR_RI BIT(6) +#define MEN_Z135_MSR_DCD BIT(7) + +#define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */ + +#define MEN_Z135_WL5 0 /* CS5 */ +#define MEN_Z135_WL6 1 /* CS6 */ +#define MEN_Z135_WL7 2 /* CS7 */ +#define MEN_Z135_WL8 3 /* CS8 */ + +#define MEN_Z135_STB_SHIFT 2 /* Stopbits */ +#define MEN_Z135_NSTB1 0 +#define MEN_Z135_NSTB2 1 + +#define MEN_Z135_PEN_SHIFT 3 /* Parity enable */ +#define MEN_Z135_PAR_DIS 0 +#define MEN_Z135_PAR_ENA 1 + +#define MEN_Z135_PTY_SHIFT 4 /* Parity type */ +#define MEN_Z135_PTY_ODD 0 +#define MEN_Z135_PTY_EVN 1 + +#define MEN_Z135_LSR_DR BIT(0) +#define MEN_Z135_LSR_OE BIT(1) +#define MEN_Z135_LSR_PE BIT(2) +#define MEN_Z135_LSR_FE BIT(3) +#define MEN_Z135_LSR_BI BIT(4) +#define MEN_Z135_LSR_THEP BIT(5) +#define MEN_Z135_LSR_TEXP BIT(6) +#define MEN_Z135_LSR_RXFIFOERR BIT(7) + +#define MEN_Z135_IRQ_ID_MST 0 +#define MEN_Z135_IRQ_ID_TSA 1 +#define MEN_Z135_IRQ_ID_RDA 2 +#define MEN_Z135_IRQ_ID_RLS 3 +#define MEN_Z135_IRQ_ID_CTI 6 + +#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff) + +#define BYTES_TO_ALIGN(x) ((x) & 0x3) + +static int line; + +static int txlvl = 5; +module_param(txlvl, int, S_IRUGO); +MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)"); + +static int rxlvl = 6; +module_param(rxlvl, int, S_IRUGO); +MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)"); + +static int align; +module_param(align, int, S_IRUGO); +MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0"); + +struct men_z135_port { + struct uart_port port; + struct mcb_device *mdev; + unsigned char *rxbuf; + u32 stat_reg; + spinlock_t lock; +}; +#define to_men_z135(port) container_of((port), struct men_z135_port, port) + +/** + * men_z135_reg_set() - Set value in register + * @uart: The UART port + * @addr: Register address + * @val: value to set + */ +static inline void men_z135_reg_set(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg |= val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_reg_clr() - Unset value in register + * @uart: The UART port + * @addr: Register address + * @val: value to clear + */ +static inline void men_z135_reg_clr(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg &= ~val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_handle_modem_status() - Handle change of modem status + * @port: The UART port + * + * Handle change of modem status register. This is done by reading the "delta" + * versions of DCD (Data Carrier Detect) and CTS (Clear To Send). + */ +static void men_z135_handle_modem_status(struct men_z135_port *uart) +{ + if (uart->stat_reg & MEN_Z135_MSR_DDCD) + uart_handle_dcd_change(&uart->port, + uart->stat_reg & ~MEN_Z135_MSR_DCD); + if (uart->stat_reg & MEN_Z135_MSR_DCTS) + uart_handle_cts_change(&uart->port, + uart->stat_reg & ~MEN_Z135_MSR_CTS); +} + +static void men_z135_handle_lsr(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u8 lsr; + + lsr = (uart->stat_reg >> 16) & 0xff; + + if (lsr & MEN_Z135_LSR_OE) + port->icount.overrun++; + if (lsr & MEN_Z135_LSR_PE) + port->icount.parity++; + if (lsr & MEN_Z135_LSR_FE) + port->icount.frame++; + if (lsr & MEN_Z135_LSR_BI) { + port->icount.brk++; + uart_handle_break(port); + } +} + +/** + * get_rx_fifo_content() - Get the number of bytes in RX FIFO + * @uart: The UART port + * + * Read RXC register from hardware and return current FIFO fill size. + */ +static u16 get_rx_fifo_content(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u32 stat_reg; + u16 rxc; + u8 rxc_lo; + u8 rxc_hi; + + stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + rxc_lo = stat_reg >> 24; + rxc_hi = (stat_reg & 0xC0) >> 6; + + rxc = rxc_lo | (rxc_hi << 8); + + return rxc; +} + +/** + * men_z135_handle_rx() - RX tasklet routine + * @arg: Pointer to struct men_z135_port + * + * Copy from RX FIFO and acknowledge number of bytes copied. + */ +static void men_z135_handle_rx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct tty_port *tport = &port->state->port; + int copied; + u16 size; + int room; + + size = get_rx_fifo_content(uart); + + if (size == 0) + return; + + /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last + * longword in RX FIFO cannot be read.(0x004-0x3FF) + */ + if (size > MEN_Z135_FIFO_WATERMARK) + size = MEN_Z135_FIFO_WATERMARK; + + room = tty_buffer_request_room(tport, size); + if (room != size) + dev_warn(&uart->mdev->dev, + "Not enough room in flip buffer, truncating to %d\n", + room); + + if (room == 0) + return; + + memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room); + /* Be sure to first copy all data and then acknowledge it */ + mb(); + iowrite32(room, port->membase + MEN_Z135_RX_CTRL); + + copied = tty_insert_flip_string(tport, uart->rxbuf, room); + if (copied != room) + dev_warn(&uart->mdev->dev, + "Only copied %d instead of %d bytes\n", + copied, room); + + port->icount.rx += copied; + + tty_flip_buffer_push(tport); + +} + +/** + * men_z135_handle_tx() - TX tasklet routine + * @arg: Pointer to struct men_z135_port + * + */ +static void men_z135_handle_tx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct circ_buf *xmit = &port->state->xmit; + u32 txc; + u32 wptr; + int qlen; + int n; + int txfree; + int head; + int tail; + int s; + + if (uart_circ_empty(xmit)) + goto out; + + if (uart_tx_stopped(port)) + goto out; + + if (port->x_char) + goto out; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* calculate bytes to copy */ + qlen = uart_circ_chars_pending(xmit); + if (qlen <= 0) + goto out; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + wptr &= 0x3ff; + + if (txc > MEN_Z135_FIFO_WATERMARK) + txc = MEN_Z135_FIFO_WATERMARK; + + txfree = MEN_Z135_FIFO_WATERMARK - txc; + if (txfree <= 0) { + pr_err("Not enough room in TX FIFO have %d, need %d\n", + txfree, qlen); + goto irq_en; + } + + /* if we're not aligned, it's better to copy only 1 or 2 bytes and + * then the rest. + */ + if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr)) + n = 4 - BYTES_TO_ALIGN(wptr); + else if (qlen > txfree) + n = txfree; + else + n = qlen; + + if (n <= 0) + goto irq_en; + + head = xmit->head & (UART_XMIT_SIZE - 1); + tail = xmit->tail & (UART_XMIT_SIZE - 1); + + s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; + n = min(n, s); + + memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n); + xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1); + mmiowb(); + + iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL); + + port->icount.tx += n; + +irq_en: + if (!uart_circ_empty(xmit)) + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + else + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + +out: + return; + +} + +/** + * men_z135_intr() - Handle legacy IRQs + * @irq: The IRQ number + * @data: Pointer to UART port + * + * Check IIR register to see which tasklet to start. + */ +static irqreturn_t men_z135_intr(int irq, void *data) +{ + struct men_z135_port *uart = (struct men_z135_port *)data; + struct uart_port *port = &uart->port; + int irq_id; + + uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + /* IRQ pending is low active */ + if (IS_IRQ(uart->stat_reg)) + return IRQ_NONE; + + irq_id = IRQ_ID(uart->stat_reg); + switch (irq_id) { + case MEN_Z135_IRQ_ID_MST: + men_z135_handle_modem_status(uart); + break; + case MEN_Z135_IRQ_ID_TSA: + men_z135_handle_tx(uart); + break; + case MEN_Z135_IRQ_ID_CTI: + dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); + /* Fallthrough */ + case MEN_Z135_IRQ_ID_RDA: + /* Reading data clears RX IRQ */ + men_z135_handle_rx(uart); + break; + case MEN_Z135_IRQ_ID_RLS: + men_z135_handle_lsr(uart); + break; + default: + dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/** + * men_z135_request_irq() - Request IRQ for 16z135 core + * @uart: z135 private uart port structure + * + * Request an IRQ for 16z135 to use. First try using MSI, if it fails + * fall back to using legacy interrupts. + */ +static int men_z135_request_irq(struct men_z135_port *uart) +{ + struct device *dev = &uart->mdev->dev; + struct uart_port *port = &uart->port; + int err = 0; + + err = request_irq(port->irq, men_z135_intr, IRQF_SHARED, + "men_z135_intr", uart); + if (err) + dev_err(dev, "Error %d getting interrupt\n", err); + + return err; +} + +/** + * men_z135_tx_empty() - Handle tx_empty call + * @port: The UART port + * + * This function tests whether the TX FIFO and shifter for the port + * described by @port is empty. + */ +static unsigned int men_z135_tx_empty(struct uart_port *port) +{ + u32 wptr; + u16 txc; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + + if (txc == 0) + return TIOCSER_TEMT; + else + return 0; +} + +/** + * men_z135_set_mctrl() - Set modem control lines + * @port: The UART port + * @mctrl: The modem control lines + * + * This function sets the modem control lines for a port described by @port + * to the state described by @mctrl + */ +static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct men_z135_port *uart = to_men_z135(port); + u32 conf_reg = 0; + + if (mctrl & TIOCM_RTS) + conf_reg |= MEN_Z135_MCR_RTS; + if (mctrl & TIOCM_DTR) + conf_reg |= MEN_Z135_MCR_DTR; + if (mctrl & TIOCM_OUT1) + conf_reg |= MEN_Z135_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + conf_reg |= MEN_Z135_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + conf_reg |= MEN_Z135_MCR_LOOP; + + men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg); +} + +/** + * men_z135_get_mctrl() - Get modem control lines + * @port: The UART port + * + * Retruns the current state of modem control inputs. + */ +static unsigned int men_z135_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u32 stat_reg; + u8 msr; + + stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + + msr = ~((stat_reg >> 8) & 0xff); + + if (msr & MEN_Z135_MSR_CTS) + mctrl |= TIOCM_CTS; + if (msr & MEN_Z135_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & MEN_Z135_MSR_RI) + mctrl |= TIOCM_RI; + if (msr & MEN_Z135_MSR_DCD) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +/** + * men_z135_stop_tx() - Stop transmitting characters + * @port: The UART port + * + * Stop transmitting characters. This might be due to CTS line becomming + * inactive or the tty layer indicating we want to stop transmission due to + * an XOFF character. + */ +static void men_z135_stop_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); +} + +/** + * men_z135_start_tx() - Start transmitting characters + * @port: The UART port + * + * Start transmitting character. This actually doesn't transmit anything, but + * fires off the TX tasklet. + */ +static void men_z135_start_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_handle_tx(uart); +} + +/** + * men_z135_stop_rx() - Stop receiving characters + * @port: The UART port + * + * Stop receiving characters; the port is in the process of being closed. + */ +static void men_z135_stop_rx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN); +} + +/** + * men_z135_enable_ms() - Enable Modem Status + * port: + * + * Enable Modem Status IRQ. + */ +static void men_z135_enable_ms(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); +} + +static int men_z135_startup(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + int err; + u32 conf_reg = 0; + + err = men_z135_request_irq(uart); + if (err) + return -ENODEV; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + + conf_reg |= MEN_Z135_ALL_IRQS; + conf_reg &= ~(0xff << 16); + conf_reg |= (txlvl << 16); + conf_reg |= (rxlvl << 20); + + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + return 0; +} + +static void men_z135_shutdown(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + u32 conf_reg = 0; + + conf_reg |= MEN_Z135_ALL_IRQS; + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg); + + free_irq(uart->port.irq, uart); +} + +static void men_z135_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + u32 conf_reg; + u32 bd_reg; + u32 uart_freq; + u8 lcr; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + lcr = LCR(conf_reg); + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= MEN_Z135_WL5; + break; + case CS6: + lcr |= MEN_Z135_WL6; + break; + case CS7: + lcr |= MEN_Z135_WL7; + break; + case CS8: + lcr |= MEN_Z135_WL8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT; + + /* parity */ + if (termios->c_cflag & PARENB) { + lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT; + + if (termios->c_cflag & PARODD) + lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT; + else + lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT; + } else + lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT; + + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + conf_reg |= lcr << MEN_Z135_LCR_SHIFT; + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ); + if (uart_freq == 0) + uart_freq = MEN_Z135_BASECLK; + + baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); + + spin_lock(&port->lock); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + bd_reg = uart_freq / (4 * baud); + iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG); + + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock(&port->lock); +} + +static const char *men_z135_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void men_z135_release_port(struct uart_port *port) +{ + iounmap(port->membase); + port->membase = NULL; + + release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); +} + +static int men_z135_request_port(struct uart_port *port) +{ + int size = MEN_Z135_MEM_SIZE; + + if (!request_mem_region(port->mapbase, size, "men_z135_port")) + return -EBUSY; + + port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE); + if (port->membase == NULL) { + release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); + return -ENOMEM; + } + + return 0; +} + +static void men_z135_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MEN_Z135; + men_z135_request_port(port); +} + +static int men_z135_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + return -EINVAL; +} + +static struct uart_ops men_z135_ops = { + .tx_empty = men_z135_tx_empty, + .set_mctrl = men_z135_set_mctrl, + .get_mctrl = men_z135_get_mctrl, + .stop_tx = men_z135_stop_tx, + .start_tx = men_z135_start_tx, + .stop_rx = men_z135_stop_rx, + .enable_ms = men_z135_enable_ms, + .startup = men_z135_startup, + .shutdown = men_z135_shutdown, + .set_termios = men_z135_set_termios, + .type = men_z135_type, + .release_port = men_z135_release_port, + .request_port = men_z135_request_port, + .config_port = men_z135_config_port, + .verify_port = men_z135_verify_port, +}; + +static struct uart_driver men_z135_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = "ttyHSU", + .major = 0, + .minor = 0, + .nr = MEN_Z135_MAX_PORTS, +}; + +/** + * men_z135_probe() - Probe a z135 instance + * @mdev: The MCB device + * @id: The MCB device ID + * + * men_z135_probe does the basic setup of hardware resources and registers the + * new uart port to the tty layer. + */ +static int men_z135_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct men_z135_port *uart; + struct resource *mem; + struct device *dev; + int err; + + dev = &mdev->dev; + + uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!uart->rxbuf) + return -ENOMEM; + + mem = &mdev->mem; + + mcb_set_drvdata(mdev, uart); + + uart->port.uartclk = MEN_Z135_BASECLK * 16; + uart->port.fifosize = MEN_Z135_FIFO_SIZE; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &men_z135_ops; + uart->port.irq = mcb_get_irq(mdev); + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = line++; + uart->port.dev = dev; + uart->port.type = PORT_MEN_Z135; + uart->port.mapbase = mem->start; + uart->port.membase = NULL; + uart->mdev = mdev; + + spin_lock_init(&uart->port.lock); + spin_lock_init(&uart->lock); + + err = uart_add_one_port(&men_z135_driver, &uart->port); + if (err) + goto err; + + return 0; + +err: + free_page((unsigned long) uart->rxbuf); + dev_err(dev, "Failed to add UART: %d\n", err); + + return err; +} + +/** + * men_z135_remove() - Remove a z135 instance from the system + * + * @mdev: The MCB device + */ +static void men_z135_remove(struct mcb_device *mdev) +{ + struct men_z135_port *uart = mcb_get_drvdata(mdev); + + line--; + uart_remove_one_port(&men_z135_driver, &uart->port); + free_page((unsigned long) uart->rxbuf); +} + +static const struct mcb_device_id men_z135_ids[] = { + { .device = 0x87 }, +}; +MODULE_DEVICE_TABLE(mcb, men_z135_ids); + +static struct mcb_driver mcb_driver = { + .driver = { + .name = "z135-uart", + .owner = THIS_MODULE, + }, + .probe = men_z135_probe, + .remove = men_z135_remove, + .id_table = men_z135_ids, +}; + +/** + * men_z135_init() - Driver Registration Routine + * + * men_z135_init is the first routine called when the driver is loaded. All it + * does is register with the legacy MEN Chameleon subsystem. + */ +static int __init men_z135_init(void) +{ + int err; + + err = uart_register_driver(&men_z135_driver); + if (err) { + pr_err("Failed to register UART: %d\n", err); + return err; + } + + err = mcb_register_driver(&mcb_driver); + if (err) { + pr_err("Failed to register MCB driver: %d\n", err); + uart_unregister_driver(&men_z135_driver); + return err; + } + + return 0; +} +module_init(men_z135_init); + +/** + * men_z135_exit() - Driver Exit Routine + * + * men_z135_exit is called just before the driver is removed from memory. + */ +static void __exit men_z135_exit(void) +{ + mcb_unregister_driver(&mcb_driver); + uart_unregister_driver(&men_z135_driver); +} +module_exit(men_z135_exit); + +MODULE_AUTHOR("Johannes Thumshirn "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MEN 16z135 High Speed UART"); +MODULE_ALIAS("mcb:16z135"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 22aaf8ed7735..6e293622851a 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -238,4 +238,7 @@ /* Tilera TILE-Gx UART */ #define PORT_TILEGX 106 +/* MEN 16z135 UART */ +#define PORT_MEN_Z135 107 + #endif /* _UAPILINUX_SERIAL_CORE_H */ -- cgit v1.2.3 From d20642f0a32575605f152a1cb7753bdfca5fc94b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 18 Apr 2014 17:19:54 -0500 Subject: x86: move FIX_EARLYCON_MEM kconfig into x86 In preparation to support FIX_EARLYCON_MEM on other arches, make the option per arch. Signed-off-by: Rob Herring Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: x86@kernel.org Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/x86/Kconfig | 3 +++ drivers/tty/serial/8250/Kconfig | 5 ----- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 25d2c6f7325e..0fb6cfd50e75 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -261,6 +261,9 @@ config ARCH_HWEIGHT_CFLAGS config ARCH_SUPPORTS_UPROBES def_bool y +config FIX_EARLYCON_MEM + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 23329918f229..91f1d8332b86 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -90,11 +90,6 @@ config SERIAL_8250_CONSOLE If unsure, say N. -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - config SERIAL_8250_GSC tristate depends on SERIAL_8250 && GSC -- cgit v1.2.3 From 9aac5887595b765b6f64b2af08b785e82e095b57 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 18 Apr 2014 17:19:55 -0500 Subject: tty/serial: add generic serial earlycon This introduces generic earlycon infrastructure for serial devices based on the 8250 earlycon. This allows for supporting earlycon option with other serial devices. The earlycon output is enabled at the time early_params are processed. Only architectures that have fixmap support or have functional ioremap when early_params are processed are supported. This is the same restriction that the 8250 driver had. Signed-off-by: Rob Herring Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 7 ++ drivers/tty/serial/Makefile | 2 + drivers/tty/serial/earlycon.c | 152 ++++++++++++++++++++++++++++++++++++++++++ include/linux/serial_core.h | 16 +++++ 4 files changed, 177 insertions(+) create mode 100644 drivers/tty/serial/earlycon.c (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 30530e47cdf0..9fb6028ad900 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -7,6 +7,13 @@ if TTY menu "Serial drivers" depends on HAS_IOMEM +config SERIAL_EARLYCON + bool + help + Support for early consoles with the earlycon parameter. This enables + the console before standard serial driver is probed. The console is + enabled when early_param is processed. + source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 5f2a3f493ab9..28048178f308 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -5,6 +5,8 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_21285) += 21285.o +obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o + # These Sparc drivers have to appear before others such as 8250 # which share ttySx minor node space. Otherwise console device # names change and other unplesantries. diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c new file mode 100644 index 000000000000..73bf1e21aae0 --- /dev/null +++ b/drivers/tty/serial/earlycon.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring + * + * Based on 8250 earlycon: + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#ifdef CONFIG_FIX_EARLYCON_MEM +#include +#endif + +#include + +static struct console early_con = { + .name = "earlycon", + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static struct earlycon_device early_console_dev = { + .con = &early_con, +}; + +static void __iomem * __init earlycon_map(unsigned long paddr, size_t size) +{ + void __iomem *base; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK); + base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + base += paddr & ~PAGE_MASK; +#else + base = ioremap(paddr, size); +#endif + if (!base) + pr_err("%s: Couldn't map 0x%llx\n", __func__, + (unsigned long long)paddr); + + return base; +} + +static int __init parse_options(struct earlycon_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length, ret; + unsigned long addr; + + if (!options) + return -ENODEV; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + options += mmio ? 5 : 7; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + if (mmio32) + port->regshift = 2; + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + options += 3; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->iobase = addr; + mmio = 0; + } else if (!strncmp(options, "0x", 2)) { + port->iotype = UPIO_MEM; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + } else { + return -EINVAL; + } + + port->uartclk = BASE_BAUD * 16; + + options = strchr(options, ','); + if (options) { + options++; + ret = kstrtouint(options, 0, &device->baud); + if (ret) + return ret; + length = min(strcspn(options, " ") + 1, + (size_t)(sizeof(device->options))); + strlcpy(device->options, options, length); + } + + if (mmio || mmio32) + pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + pr_info("Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +int __init setup_earlycon(char *buf, const char *match, + int (*setup)(struct earlycon_device *, const char *)) +{ + int err; + size_t len; + struct uart_port *port = &early_console_dev.port; + + if (!buf || !match || !setup) + return 0; + + len = strlen(match); + if (strncmp(buf, match, len)) + return 0; + if (buf[len] && (buf[len] != ',')) + return 0; + + buf += len + 1; + + err = parse_options(&early_console_dev, buf); + /* On parsing error, pass the options buf to the setup function */ + if (!err) + buf = NULL; + + if (port->mapbase) + port->membase = earlycon_map(port->mapbase, 64); + + early_console_dev.con->data = &early_console_dev; + err = setup(&early_console_dev, buf); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + register_console(early_console_dev.con); + return 0; +} diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f729be981da0..7a15b5b24c0b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -285,6 +285,22 @@ static inline int uart_poll_timeout(struct uart_port *port) /* * Console helpers. */ +struct earlycon_device { + struct console *con; + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; +int setup_earlycon(char *buf, const char *match, + int (*setup)(struct earlycon_device *, const char *)); + +#define EARLYCON_DECLARE(name, func) \ +static int __init name ## _setup_earlycon(char *buf) \ +{ \ + return setup_earlycon(buf, __stringify(name), func); \ +} \ +early_param("earlycon", name ## _setup_earlycon); + struct uart_port *uart_get_console(struct uart_port *ports, int nr, struct console *c); void uart_parse_options(char *options, int *baud, int *parity, int *bits, -- cgit v1.2.3 From d2fd6810a823bcde1ee232668f5689837aafa772 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 18 Apr 2014 17:19:56 -0500 Subject: tty/serial: convert 8250 to generic earlycon With the generic earlycon infrastructure in place, convert the 8250 early console to use it. Signed-off-by: Rob Herring Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_early.c | 138 ++++------------------------------- drivers/tty/serial/8250/Kconfig | 1 + 2 files changed, 16 insertions(+), 123 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index c100d6343d50..e83c9db3300c 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -35,18 +35,8 @@ #include #include #include -#ifdef CONFIG_FIX_EARLYCON_MEM -#include -#include -#endif -struct early_serial8250_device { - struct uart_port port; - char options[16]; /* e.g., 115200n8 */ - unsigned int baud; -}; - -static struct early_serial8250_device early_device; +static struct earlycon_device *early_device; unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset) { @@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c) static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count) { - struct uart_port *port = &early_device.port; + struct uart_port *port = &early_device->port; unsigned int ier; /* Save the IER and disable interrupts */ @@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port) return (port->uartclk / 16) / quot; } -static void __init init_port(struct early_serial8250_device *device) +static void __init init_port(struct earlycon_device *device) { struct uart_port *port = &device->port; unsigned int divisor; @@ -148,128 +138,32 @@ static void __init init_port(struct early_serial8250_device *device) serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init parse_options(struct early_serial8250_device *device, - char *options) -{ - struct uart_port *port = &device->port; - int mmio, mmio32, length; - - if (!options) - return -ENODEV; - - port->uartclk = BASE_BAUD * 16; - - mmio = !strncmp(options, "mmio,", 5); - mmio32 = !strncmp(options, "mmio32,", 7); - if (mmio || mmio32) { - port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); - port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), - &options, 0); - if (mmio32) - port->regshift = 2; -#ifdef CONFIG_FIX_EARLYCON_MEM - set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, - port->mapbase & PAGE_MASK); - port->membase = - (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); - port->membase += port->mapbase & ~PAGE_MASK; -#else - port->membase = ioremap_nocache(port->mapbase, 64); - if (!port->membase) { - printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __func__, - (unsigned long long) port->mapbase); - return -ENOMEM; - } -#endif - } else if (!strncmp(options, "io,", 3)) { - port->iotype = UPIO_PORT; - port->iobase = simple_strtoul(options + 3, &options, 0); - mmio = 0; - } else - return -EINVAL; - - options = strchr(options, ','); - if (options) { - options++; - device->baud = simple_strtoul(options, NULL, 0); - length = min(strcspn(options, " ") + 1, - (size_t)(sizeof(device->options))); - strlcpy(device->options, options, length); - } else { - device->baud = probe_baud(port); - snprintf(device->options, sizeof(device->options), "%u", - device->baud); - } - - if (mmio || mmio32) - printk(KERN_INFO - "Early serial console at MMIO%s 0x%llx (options '%s')\n", - mmio32 ? "32" : "", - (unsigned long long)port->mapbase, - device->options); - else - printk(KERN_INFO - "Early serial console at I/O port 0x%lx (options '%s')\n", - port->iobase, - device->options); - - return 0; -} - -static struct console early_serial8250_console __initdata = { - .name = "uart", - .write = early_serial8250_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static int __init early_serial8250_setup(char *options) +static int __init early_serial8250_setup(struct earlycon_device *device, + const char *options) { - struct early_serial8250_device *device = &early_device; - int err; - - if (device->port.membase || device->port.iobase) + if (!(device->port.membase || device->port.iobase)) return 0; - err = parse_options(device, options); - if (err < 0) - return err; + if (!device->baud) + device->baud = probe_baud(&device->port); init_port(device); - return 0; -} - -int __init setup_early_serial8250_console(char *cmdline) -{ - char *options; - int err; - - options = strstr(cmdline, "uart8250,"); - if (!options) { - options = strstr(cmdline, "uart,"); - if (!options) - return 0; - } - - options = strchr(cmdline, ',') + 1; - err = early_serial8250_setup(options); - if (err < 0) - return err; - - register_console(&early_serial8250_console); + early_device = device; + device->con->write = early_serial8250_write; return 0; } +EARLYCON_DECLARE(uart8250, early_serial8250_setup); +EARLYCON_DECLARE(uart, early_serial8250_setup); int serial8250_find_port_for_earlycon(void) { - struct early_serial8250_device *device = &early_device; - struct uart_port *port = &device->port; + struct earlycon_device *device = early_device; + struct uart_port *port = device ? &device->port : NULL; int line; int ret; - if (!device->port.membase && !device->port.iobase) + if (!port || (!port->membase && !port->iobase)) return -ENODEV; line = serial8250_find_port(port); @@ -284,5 +178,3 @@ int serial8250_find_port_for_earlycon(void) return ret; } - -early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 91f1d8332b86..349ee598b34c 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -61,6 +61,7 @@ config SERIAL_8250_CONSOLE bool "Console on 8250/16550 and compatible serial port" depends on SERIAL_8250=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all -- cgit v1.2.3 From 0d3c673e7881e691991b2a4745bd4f149603baa2 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 18 Apr 2014 17:19:57 -0500 Subject: tty/serial: pl011: add generic earlycon support Add earlycon support for the pl011 serial port. This allows enabling the pl011 for console when early_params are processed. This is based on the arm64 earlyprintk support and is intended to replace it. Signed-off-by: Rob Herring Cc: Russell King Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 7 +++++++ drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/amba-pl011.c | 30 +++++++++++++++++++++++++++++- 3 files changed, 37 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 43842177b771..2609ead7ff55 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -883,6 +883,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. which are not unmapped. earlycon= [KNL] Output early console device and options. + uart[8250],io,[,options] uart[8250],mmio,[,options] uart[8250],mmio32,[,options] @@ -892,6 +893,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. (mmio) or 32-bit (mmio32). The options are the same as for ttyS, above. + pl011, + Start an early, polled-mode console on a pl011 serial + port at the specified address. The pl011 serial port + must already be setup and configured. Options are not + yet supported. + earlyprintk= [X86,SH,BLACKFIN,ARM] earlyprintk=vga earlyprintk=efi diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 9fb6028ad900..4290d05875b1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -60,6 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE bool "Support for console on AMBA serial port" depends on SERIAL_AMBA_PL011=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON ---help--- Say Y here if you wish to use an AMBA PrimeCell UART as the system console (the system console is the device which receives all kernel diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index dacf0a09ab24..ee3d80346780 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -303,7 +303,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * /* Optionally make use of an RX channel as well */ chan = dma_request_slave_channel(dev, "rx"); - + if (!chan && plat->dma_rx_param) { chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); @@ -2045,6 +2045,34 @@ static struct console amba_console = { }; #define AMBA_CONSOLE (&amba_console) + +static void pl011_putc(struct uart_port *port, int c) +{ + while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) + ; + writeb(c, port->membase + UART01x_DR); + while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) + ; +} + +static void pl011_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, pl011_putc); +} + +static int __init pl011_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = pl011_early_write; + return 0; +} +EARLYCON_DECLARE(pl011, pl011_early_console_setup); + #else #define AMBA_CONSOLE NULL #endif -- cgit v1.2.3 From d50d7269ebcb438afa346cdffce0f4e2a1b9e831 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 18 Apr 2014 17:19:58 -0500 Subject: tty/serial: add arm/arm64 semihosting earlycon Add earlycon support for the arm/arm64 semihosting debug serial interface. This allows enabling a debug console when early_params are processed. This is based on the arm64 earlyprintk smh support and is intended to replace it. Signed-off-by: Rob Herring Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 + drivers/tty/serial/Kconfig | 10 +++++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/earlycon-arm-semihost.c | 61 ++++++++++++++++++++++++++++++ 4 files changed, 74 insertions(+) create mode 100644 drivers/tty/serial/earlycon-arm-semihost.c (limited to 'drivers/tty') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2609ead7ff55..4946d8e58d53 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -899,6 +899,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. must already be setup and configured. Options are not yet supported. + smh Use ARM semihosting calls for early console. + earlyprintk= [X86,SH,BLACKFIN,ARM] earlyprintk=vga earlyprintk=efi diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4290d05875b1..988fa2b6243b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -73,6 +73,16 @@ config SERIAL_AMBA_PL011_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) +config SERIAL_EARLYCON_ARM_SEMIHOST + bool "Early console using ARM semihosting" + depends on ARM64 || ARM + select SERIAL_EARLYCON + help + Support for early debug console using ARM semihosting. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon=smh" on the kernel command line. The console is + enabled when early_param is processed. + config SERIAL_SB1250_DUART tristate "BCM1xxx on-chip DUART serial support" depends on SIBYTE_SB1xxx_SOC=y diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 28048178f308..3a5be4633333 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_21285) += 21285.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o +obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o # These Sparc drivers have to appear before others such as 8250 # which share ttySx minor node space. Otherwise console device diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c new file mode 100644 index 000000000000..383db10fbb49 --- /dev/null +++ b/drivers/tty/serial/earlycon-arm-semihost.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier + * + * Adapted for ARM and earlycon: + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include +#include +#include +#include + +#ifdef CONFIG_THUMB2_KERNEL +#define SEMIHOST_SWI "0xab" +#else +#define SEMIHOST_SWI "0x123456" +#endif + +/* + * Semihosting-based debug console + */ +static void smh_putc(struct uart_port *port, int c) +{ +#ifdef CONFIG_ARM64 + asm volatile("mov x1, %0\n" + "mov x0, #3\n" + "hlt 0xf000\n" + : : "r" (&c) : "x0", "x1", "memory"); +#else + asm volatile("mov r1, %0\n" + "mov r0, #3\n" + "svc " SEMIHOST_SWI "\n" + : : "r" (&c) : "r0", "r1", "memory"); +#endif +} + +static void smh_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + uart_console_write(&dev->port, s, n, smh_putc); +} + +int __init early_smh_setup(struct earlycon_device *device, const char *opt) +{ + device->con->write = smh_write; + return 0; +} +EARLYCON_DECLARE(smh, early_smh_setup); -- cgit v1.2.3 From 2aafb3864b9fa5ce83250537d940f973ef37b8dc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 24 Apr 2014 19:26:16 -0700 Subject: Revert "serial: sh-sci: Add device tree support for r8a7779" This reverts commit fcbee4d49f30eb0eaa83a62e6a3cab5a892ed93f. It wasn't quite ready to go in yet, sorry about that. Cc: Simon Horman Cc: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/renesas,sci-serial.txt | 1 - drivers/tty/serial/sh-sci.c | 10 +--------- 2 files changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index bba86de1a094..53e6c175db6c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -12,7 +12,6 @@ Required properties: - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. - - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 3b5d2f679946..88236da0ddf7 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2419,7 +2419,6 @@ static int sci_remove(struct platform_device *dev) struct sci_port_info { unsigned int type; unsigned int regtype; - unsigned int scscr_extra; }; static const struct of_device_id of_sci_match[] = { @@ -2429,13 +2428,6 @@ static const struct of_device_id of_sci_match[] = { .type = PORT_SCIF, .regtype = SCIx_SH4_SCIF_REGTYPE, }, - }, { - .compatible = "renesas,scif-r8a7779", - .data = (void *)&(const struct sci_port_info) { - .type = PORT_SCIF, - .regtype = SCIx_SH4_SCIF_REGTYPE, - .scscr_extra = SCSCR_CKE1, - }, }, { .compatible = "renesas,scifa", .data = &(const struct sci_port_info) { @@ -2496,7 +2488,7 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; p->type = info->type; p->regtype = info->regtype; - p->scscr = SCSCR_RE | SCSCR_TE | info->scscr_extra; + p->scscr = SCSCR_RE | SCSCR_TE; return p; } -- cgit v1.2.3 From dfeae619d781dee61666d5551b93ba3be755a86b Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Thu, 24 Apr 2014 20:56:06 -0400 Subject: serial: sc16is7xx The SC16IS7xx is a slave I2C-bus/SPI interface to a single-channel high performance UART. The SC16IS7xx's internal register set is backward-compatible with the widely used and widely popular 16C450. The SC16IS7xx also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support, and software reset. Signed-off-by: Jon Ringle Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 9 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/sc16is7xx.c | 1279 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 4 files changed, 1292 insertions(+) create mode 100644 drivers/tty/serial/sc16is7xx.c (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 988fa2b6243b..c3e2b328327c 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1178,6 +1178,15 @@ config SERIAL_SCCNXP_CONSOLE help Support for console on SCCNXP serial ports. +config SERIAL_SC16IS7XX + tristate "SC16IS7xx serial support" + select SERIAL_CORE + select REGMAP_I2C if I2C + help + This selects support for SC16IS7xx serial ports. + Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, + SC16IS760 and SC16IS762. + config SERIAL_BFIN_SPORT tristate "Blackfin SPORT emulate UART" depends on BLACKFIN diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 3a5be4633333..712732b43917 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o +obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c new file mode 100644 index 000000000000..ed139f5a6f74 --- /dev/null +++ b/drivers/tty/serial/sc16is7xx.c @@ -0,0 +1,1279 @@ +/* + * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint + * Author: Jon Ringle + * + * Based on max310x.c, by Alexander Shiyan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SC16IS7XX_NAME "sc16is7xx" + +/* SC16IS7XX register definitions */ +#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */ +#define SC16IS7XX_THR_REG (0x00) /* TX FIFO */ +#define SC16IS7XX_IER_REG (0x01) /* Interrupt enable */ +#define SC16IS7XX_IIR_REG (0x02) /* Interrupt Identification */ +#define SC16IS7XX_FCR_REG (0x02) /* FIFO control */ +#define SC16IS7XX_LCR_REG (0x03) /* Line Control */ +#define SC16IS7XX_MCR_REG (0x04) /* Modem Control */ +#define SC16IS7XX_LSR_REG (0x05) /* Line Status */ +#define SC16IS7XX_MSR_REG (0x06) /* Modem Status */ +#define SC16IS7XX_SPR_REG (0x07) /* Scratch Pad */ +#define SC16IS7XX_TXLVL_REG (0x08) /* TX FIFO level */ +#define SC16IS7XX_RXLVL_REG (0x09) /* RX FIFO level */ +#define SC16IS7XX_IODIR_REG (0x0a) /* I/O Direction + * - only on 75x/76x + */ +#define SC16IS7XX_IOSTATE_REG (0x0b) /* I/O State + * - only on 75x/76x + */ +#define SC16IS7XX_IOINTENA_REG (0x0c) /* I/O Interrupt Enable + * - only on 75x/76x + */ +#define SC16IS7XX_IOCONTROL_REG (0x0e) /* I/O Control + * - only on 75x/76x + */ +#define SC16IS7XX_EFCR_REG (0x0f) /* Extra Features Control */ + +/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */ +#define SC16IS7XX_TCR_REG (0x06) /* Transmit control */ +#define SC16IS7XX_TLR_REG (0x07) /* Trigger level */ + +/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */ +#define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */ +#define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */ + +/* Enhanced Register set: Only if (LCR == 0xBF) */ +#define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */ +#define SC16IS7XX_XON1_REG (0x04) /* Xon1 word */ +#define SC16IS7XX_XON2_REG (0x05) /* Xon2 word */ +#define SC16IS7XX_XOFF1_REG (0x06) /* Xoff1 word */ +#define SC16IS7XX_XOFF2_REG (0x07) /* Xoff2 word */ + +/* IER register bits */ +#define SC16IS7XX_IER_RDI_BIT (1 << 0) /* Enable RX data interrupt */ +#define SC16IS7XX_IER_THRI_BIT (1 << 1) /* Enable TX holding register + * interrupt */ +#define SC16IS7XX_IER_RLSI_BIT (1 << 2) /* Enable RX line status + * interrupt */ +#define SC16IS7XX_IER_MSI_BIT (1 << 3) /* Enable Modem status + * interrupt */ + +/* IER register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_IER_SLEEP_BIT (1 << 4) /* Enable Sleep mode */ +#define SC16IS7XX_IER_XOFFI_BIT (1 << 5) /* Enable Xoff interrupt */ +#define SC16IS7XX_IER_RTSI_BIT (1 << 6) /* Enable nRTS interrupt */ +#define SC16IS7XX_IER_CTSI_BIT (1 << 7) /* Enable nCTS interrupt */ + +/* FCR register bits */ +#define SC16IS7XX_FCR_FIFO_BIT (1 << 0) /* Enable FIFO */ +#define SC16IS7XX_FCR_RXRESET_BIT (1 << 1) /* Reset RX FIFO */ +#define SC16IS7XX_FCR_TXRESET_BIT (1 << 2) /* Reset TX FIFO */ +#define SC16IS7XX_FCR_RXLVLL_BIT (1 << 6) /* RX Trigger level LSB */ +#define SC16IS7XX_FCR_RXLVLH_BIT (1 << 7) /* RX Trigger level MSB */ + +/* FCR register bits - write only if (EFR[4] == 1) */ +#define SC16IS7XX_FCR_TXLVLL_BIT (1 << 4) /* TX Trigger level LSB */ +#define SC16IS7XX_FCR_TXLVLH_BIT (1 << 5) /* TX Trigger level MSB */ + +/* IIR register bits */ +#define SC16IS7XX_IIR_NO_INT_BIT (1 << 0) /* No interrupts pending */ +#define SC16IS7XX_IIR_ID_MASK 0x3e /* Mask for the interrupt ID */ +#define SC16IS7XX_IIR_THRI_SRC 0x02 /* TX holding register empty */ +#define SC16IS7XX_IIR_RDI_SRC 0x04 /* RX data interrupt */ +#define SC16IS7XX_IIR_RLSE_SRC 0x06 /* RX line status error */ +#define SC16IS7XX_IIR_RTOI_SRC 0x0c /* RX time-out interrupt */ +#define SC16IS7XX_IIR_MSI_SRC 0x00 /* Modem status interrupt + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_INPIN_SRC 0x30 /* Input pin change of state + * - only on 75x/76x + */ +#define SC16IS7XX_IIR_XOFFI_SRC 0x10 /* Received Xoff */ +#define SC16IS7XX_IIR_CTSRTS_SRC 0x20 /* nCTS,nRTS change of state + * from active (LOW) + * to inactive (HIGH) + */ +/* LCR register bits */ +#define SC16IS7XX_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define SC16IS7XX_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define SC16IS7XX_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define SC16IS7XX_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define SC16IS7XX_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define SC16IS7XX_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define SC16IS7XX_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define SC16IS7XX_LCR_DLAB_BIT (1 << 7) /* Divisor Latch enable */ +#define SC16IS7XX_LCR_WORD_LEN_5 (0x00) +#define SC16IS7XX_LCR_WORD_LEN_6 (0x01) +#define SC16IS7XX_LCR_WORD_LEN_7 (0x02) +#define SC16IS7XX_LCR_WORD_LEN_8 (0x03) +#define SC16IS7XX_LCR_CONF_MODE_A SC16IS7XX_LCR_DLAB_BIT /* Special + * reg set */ +#define SC16IS7XX_LCR_CONF_MODE_B 0xBF /* Enhanced + * reg set */ + +/* MCR register bits */ +#define SC16IS7XX_MCR_DTR_BIT (1 << 0) /* DTR complement + * - only on 75x/76x + */ +#define SC16IS7XX_MCR_RTS_BIT (1 << 1) /* RTS complement */ +#define SC16IS7XX_MCR_TCRTLR_BIT (1 << 2) /* TCR/TLR register enable */ +#define SC16IS7XX_MCR_LOOP_BIT (1 << 4) /* Enable loopback test mode */ +#define SC16IS7XX_MCR_XONANY_BIT (1 << 5) /* Enable Xon Any + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_IRDA_BIT (1 << 6) /* Enable IrDA mode + * - write enabled + * if (EFR[4] == 1) + */ +#define SC16IS7XX_MCR_CLKSEL_BIT (1 << 7) /* Divide clock by 4 + * - write enabled + * if (EFR[4] == 1) + */ + +/* LSR register bits */ +#define SC16IS7XX_LSR_DR_BIT (1 << 0) /* Receiver data ready */ +#define SC16IS7XX_LSR_OE_BIT (1 << 1) /* Overrun Error */ +#define SC16IS7XX_LSR_PE_BIT (1 << 2) /* Parity Error */ +#define SC16IS7XX_LSR_FE_BIT (1 << 3) /* Frame Error */ +#define SC16IS7XX_LSR_BI_BIT (1 << 4) /* Break Interrupt */ +#define SC16IS7XX_LSR_BRK_ERROR_MASK 0x1E /* BI, FE, PE, OE bits */ +#define SC16IS7XX_LSR_THRE_BIT (1 << 5) /* TX holding register empty */ +#define SC16IS7XX_LSR_TEMT_BIT (1 << 6) /* Transmitter empty */ +#define SC16IS7XX_LSR_FIFOE_BIT (1 << 7) /* Fifo Error */ + +/* MSR register bits */ +#define SC16IS7XX_MSR_DCTS_BIT (1 << 0) /* Delta CTS Clear To Send */ +#define SC16IS7XX_MSR_DDSR_BIT (1 << 1) /* Delta DSR Data Set Ready + * or (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DRI_BIT (1 << 2) /* Delta RI Ring Indicator + * or (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DCD_BIT (1 << 3) /* Delta CD Carrier Detect + * or (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */ +#define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6) + * - only on 75x/76x + */ +#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */ + +/* + * TCR register bits + * TCR trigger levels are available from 0 to 60 characters with a granularity + * of four. + * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is + * no built-in hardware check to make sure this condition is met. Also, the TCR + * must be programmed with this condition before auto RTS or software flow + * control is enabled to avoid spurious operation of the device. + */ +#define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4) + +/* + * TLR register bits + * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the + * FIFO Control Register (FCR) are used for the transmit and receive FIFO + * trigger levels. Trigger levels from 4 characters to 60 characters are + * available with a granularity of four. + * + * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the + * trigger level setting defined in FCR. If TLR has non-zero trigger level value + * the trigger level defined in FCR is discarded. This applies to both transmit + * FIFO and receive FIFO trigger level setting. + * + * When TLR is used for RX trigger level control, FCR[7:6] should be left at the + * default state, that is, '00'. + */ +#define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0) +#define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4) + +/* IOControl register bits (Only 750/760) */ +#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ +#define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */ +#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ + +/* EFCR register bits */ +#define SC16IS7XX_EFCR_9BIT_MODE_BIT (1 << 0) /* Enable 9-bit or Multidrop + * mode (RS485) */ +#define SC16IS7XX_EFCR_RXDISABLE_BIT (1 << 1) /* Disable receiver */ +#define SC16IS7XX_EFCR_TXDISABLE_BIT (1 << 2) /* Disable transmitter */ +#define SC16IS7XX_EFCR_AUTO_RS485_BIT (1 << 4) /* Auto RS485 RTS direction */ +#define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */ +#define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode + * 0 = rate upto 115.2 kbit/s + * - Only 750/760 + * 1 = rate upto 1.152 Mbit/s + * - Only 760 + */ + +/* EFR register bits */ +#define SC16IS7XX_EFR_AUTORTS_BIT (1 << 6) /* Auto RTS flow ctrl enable */ +#define SC16IS7XX_EFR_AUTOCTS_BIT (1 << 7) /* Auto CTS flow ctrl enable */ +#define SC16IS7XX_EFR_XOFF2_DETECT_BIT (1 << 5) /* Enable Xoff2 detection */ +#define SC16IS7XX_EFR_ENABLE_BIT (1 << 4) /* Enable enhanced functions + * and writing to IER[7:4], + * FCR[5:4], MCR[7:5] + */ +#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */ +#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no transmitter flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ +#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */ +#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * 10 -> receiver compares + * XON1 and XOFF1 + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* Misc definitions */ +#define SC16IS7XX_FIFO_SIZE (64) +#define SC16IS7XX_REG_SHIFT 2 + +struct sc16is7xx_devtype { + char name[10]; + int nr_gpio; + int nr_uart; +}; + +struct sc16is7xx_one { + struct uart_port port; + struct work_struct tx_work; + struct work_struct md_work; + + struct serial_rs485 rs485; +}; + +struct sc16is7xx_port { + struct uart_driver uart; + struct sc16is7xx_devtype *devtype; + struct regmap *regmap; + struct mutex mutex; + struct clk *clk; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + struct sc16is7xx_one p[0]; +}; + +#define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) + +static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val = 0; + + regmap_read(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, &val); + + return val; +} + +static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + regmap_write(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, val); +} + +static void sc16is7xx_port_update(struct uart_port *port, u8 reg, + u8 mask, u8 val) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + regmap_update_bits(s->regmap, + (reg << SC16IS7XX_REG_SHIFT) | port->line, + mask, val); +} + + +static void sc16is7xx_power(struct uart_port *port, int on) +{ + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_IER_SLEEP_BIT, + on ? 0 : SC16IS7XX_IER_SLEEP_BIT); +} + +static const struct sc16is7xx_devtype sc16is74x_devtype = { + .name = "SC16IS74X", + .nr_gpio = 0, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is750_devtype = { + .name = "SC16IS750", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is752_devtype = { + .name = "SC16IS752", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static const struct sc16is7xx_devtype sc16is760_devtype = { + .name = "SC16IS760", + .nr_gpio = 8, + .nr_uart = 1, +}; + +static const struct sc16is7xx_devtype sc16is762_devtype = { + .name = "SC16IS762", + .nr_gpio = 8, + .nr_uart = 2, +}; + +static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + case SC16IS7XX_IIR_REG: + case SC16IS7XX_LSR_REG: + case SC16IS7XX_MSR_REG: + case SC16IS7XX_TXLVL_REG: + case SC16IS7XX_RXLVL_REG: + case SC16IS7XX_IOSTATE_REG: + return true; + default: + break; + } + + return false; +} + +static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg) +{ + switch (reg >> SC16IS7XX_REG_SHIFT) { + case SC16IS7XX_RHR_REG: + return true; + default: + break; + } + + return false; +} + +static int sc16is7xx_set_baud(struct uart_port *port, int baud) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + u8 lcr; + u8 prescaler = 0; + unsigned long clk = port->uartclk, div = clk / 16 / baud; + + if (div > 0xffff) { + prescaler = SC16IS7XX_MCR_CLKSEL_BIT; + div /= 4; + } + + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Enable enhanced features */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_CLKSEL_BIT, + prescaler); + + /* Open the LCR divisors for configuration */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_A); + + /* Write the new divisor */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256); + sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256); + regcache_cache_bypass(s->regmap, false); + + /* Put LCR back to the normal mode */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + return DIV_ROUND_CLOSEST(clk / 16, div); +} + +static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, + unsigned int iir) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lsr = 0, ch, flag, bytes_read, i; + u8 buf[port->fifosize]; + bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false; + + if (unlikely(rxlen >= port->fifosize)) { + dev_warn_ratelimited(port->dev, + "Port %i: Possible RX FIFO overrun: %d\n", + port->line, rxlen); + port->icount.buf_overrun++; + /* Ensure sanity of RX level */ + rxlen = port->fifosize; + } + + while (rxlen) { + /* Only read lsr if there are possible errors in FIFO */ + if (read_lsr) { + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT)) + read_lsr = false; /* No errors left in FIFO */ + } else + lsr = 0; + + if (read_lsr) { + buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); + bytes_read = 1; + } else { + regcache_cache_bypass(s->regmap, true); + regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG, + buf, rxlen); + regcache_cache_bypass(s->regmap, false); + bytes_read = rxlen; + } + + lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK; + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(lsr)) { + if (lsr & SC16IS7XX_LSR_BI_BIT) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (lsr & SC16IS7XX_LSR_PE_BIT) + port->icount.parity++; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + port->icount.frame++; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & SC16IS7XX_LSR_BI_BIT) + flag = TTY_BREAK; + else if (lsr & SC16IS7XX_LSR_PE_BIT) + flag = TTY_PARITY; + else if (lsr & SC16IS7XX_LSR_FE_BIT) + flag = TTY_FRAME; + else if (lsr & SC16IS7XX_LSR_OE_BIT) + flag = TTY_OVERRUN; + } + + for (i = 0; i < bytes_read; ++i) { + ch = buf[i]; + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (lsr & port->ignore_status_mask) + continue; + + uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch, + flag); + } + rxlen -= bytes_read; + } + + tty_flip_buffer_push(&port->state->port); +} + +static void sc16is7xx_handle_tx(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send, i; + u8 buf[port->fifosize]; + + if (unlikely(port->x_char)) { + sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + to_send = (to_send > txlen) ? txlen : to_send; + + /* Add data to send */ + port->icount.tx += to_send; + + /* Convert to linear buffer */ + for (i = 0; i < to_send; ++i) { + buf[i] = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + regcache_cache_bypass(s->regmap, true); + regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, buf, to_send); + regcache_cache_bypass(s->regmap, false); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) +{ + struct uart_port *port = &s->p[portno].port; + + do { + unsigned int iir, msr, rxlen; + + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) + break; + + iir &= SC16IS7XX_IIR_ID_MASK; + + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; + + case SC16IS7XX_IIR_CTSRTS_SRC: + msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG); + uart_handle_cts_change(port, + !!(msr & SC16IS7XX_MSR_CTS_BIT)); + break; + case SC16IS7XX_IIR_THRI_SRC: + mutex_lock(&s->mutex); + sc16is7xx_handle_tx(port); + mutex_unlock(&s->mutex); + break; + default: + dev_err_ratelimited(port->dev, + "Port %i: Unexpected interrupt: %x", + port->line, iir); + break; + } + } while (1); +} + +static irqreturn_t sc16is7xx_ist(int irq, void *dev_id) +{ + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; + int i; + + for (i = 0; i < s->uart.nr; ++i) + sc16is7xx_port_irq(s, i); + + return IRQ_HANDLED; +} + +static void sc16is7xx_wq_proc(struct work_struct *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work); + struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev); + + mutex_lock(&s->mutex); + sc16is7xx_handle_tx(&one->port); + mutex_unlock(&s->mutex); +} + +static void sc16is7xx_stop_tx(struct uart_port* port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + struct circ_buf *xmit = &one->port.state->xmit; + + /* handle rs485 */ + if (one->rs485.flags & SER_RS485_ENABLED) { + /* do nothing if current tx not yet completed */ + int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + if (!(lsr & SC16IS7XX_LSR_TEMT_BIT)) + return; + + if (uart_circ_empty(xmit) && + (one->rs485.delay_rts_after_send > 0)) + mdelay(one->rs485.delay_rts_after_send); + } + + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_IER_THRI_BIT, + 0); +} + +static void sc16is7xx_stop_rx(struct uart_port* port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT; + sc16is7xx_port_update(port, SC16IS7XX_IER_REG, + SC16IS7XX_LSR_DR_BIT, + 0); +} + +static void sc16is7xx_start_tx(struct uart_port *port) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + /* handle rs485 */ + if ((one->rs485.flags & SER_RS485_ENABLED) && + (one->rs485.delay_rts_before_send > 0)) { + mdelay(one->rs485.delay_rts_before_send); + } + + if (!work_pending(&one->tx_work)) + schedule_work(&one->tx_work); +} + +static unsigned int sc16is7xx_tx_empty(struct uart_port *port) +{ + unsigned int lvl, lsr; + + lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); + lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); + + return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0; +} + +static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void sc16is7xx_md_proc(struct work_struct *ws) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work); + + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_LOOP_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + SC16IS7XX_MCR_LOOP_BIT : 0); +} + +static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + schedule_work(&one->md_work); +} + +static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) +{ + sc16is7xx_port_update(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_TXBREAK_BIT, + break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0); +} + +static void sc16is7xx_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int lcr, flow = 0; + int baud; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = SC16IS7XX_LCR_WORD_LEN_5; + break; + case CS6: + lcr = SC16IS7XX_LCR_WORD_LEN_6; + break; + case CS7: + lcr = SC16IS7XX_LCR_WORD_LEN_7; + break; + case CS8: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + break; + default: + lcr = SC16IS7XX_LCR_WORD_LEN_8; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= SC16IS7XX_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= SC16IS7XX_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Set read status mask */ + port->read_status_mask = SC16IS7XX_LSR_OE_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SC16IS7XX_LSR_PE_BIT | + SC16IS7XX_LSR_FE_BIT; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SC16IS7XX_LSR_BI_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; + + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + /* Configure flow control */ + regcache_cache_bypass(s->regmap, true); + sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]); + sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]); + if (termios->c_cflag & CRTSCTS) + flow |= SC16IS7XX_EFR_AUTOCTS_BIT | + SC16IS7XX_EFR_AUTORTS_BIT; + if (termios->c_iflag & IXON) + flow |= SC16IS7XX_EFR_SWFLOW3_BIT; + if (termios->c_iflag & IXOFF) + flow |= SC16IS7XX_EFR_SWFLOW1_BIT; + + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow); + regcache_cache_bypass(s->regmap, false); + + /* Update LCR register */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 4 / 0xffff, + port->uartclk / 16); + + /* Setup baudrate generator */ + baud = sc16is7xx_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); +} + +#if defined(TIOCSRS485) && defined(TIOCGRS485) +static void sc16is7xx_config_rs485(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); + + one->rs485 = *rs485; + + if (one->rs485.flags & SER_RS485_ENABLED) { + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_AUTO_RS485_BIT, + SC16IS7XX_EFCR_AUTO_RS485_BIT); + } else { + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_AUTO_RS485_BIT, + 0); + } +} +#endif + +static int sc16is7xx_ioctl(struct uart_port *port, unsigned int cmd, + unsigned long arg) +{ +#if defined(TIOCSRS485) && defined(TIOCGRS485) + struct serial_rs485 rs485; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485))) + return -EFAULT; + + sc16is7xx_config_rs485(port, &rs485); + return 0; + case TIOCGRS485: + if (copy_to_user((void __user *)arg, + &(to_sc16is7xx_one(port, port)->rs485), + sizeof(rs485))) + return -EFAULT; + return 0; + default: + break; + } +#endif + + return -ENOIOCTLCMD; +} + +static int sc16is7xx_startup(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + unsigned int val; + + sc16is7xx_power(port, 1); + + /* Reset FIFOs*/ + val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT; + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val); + udelay(5); + sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, + SC16IS7XX_FCR_FIFO_BIT); + + /* Enable EFR */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, + SC16IS7XX_LCR_CONF_MODE_B); + + regcache_cache_bypass(s->regmap, true); + + /* Enable write access to enhanced features and internal clock div */ + sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, + SC16IS7XX_EFR_ENABLE_BIT); + + /* Enable TCR/TLR */ + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_TCRTLR_BIT, + SC16IS7XX_MCR_TCRTLR_BIT); + + /* Configure flow control levels */ + /* Flow control halt level 48, resume level 24 */ + sc16is7xx_port_write(port, SC16IS7XX_TCR_REG, + SC16IS7XX_TCR_RX_RESUME(24) | + SC16IS7XX_TCR_RX_HALT(48)); + + regcache_cache_bypass(s->regmap, false); + + /* Now, initialize the UART */ + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8); + + /* Enable the Rx and Tx FIFO */ + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT, + 0); + + /* Enable RX, TX, CTS change interrupts */ + val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT | + SC16IS7XX_IER_CTSI_BIT; + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val); + + return 0; +} + +static void sc16is7xx_shutdown(struct uart_port *port) +{ + /* Disable all interrupts */ + sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + + sc16is7xx_power(port, 0); +} + +static const char *sc16is7xx_type(struct uart_port *port) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL; +} + +static int sc16is7xx_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void sc16is7xx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_SC16IS7XX; +} + +static int sc16is7xx_verify_port(struct uart_port *port, + struct serial_struct *s) +{ + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; + + return 0; +} + +static void sc16is7xx_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0); +} + +static void sc16is7xx_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops sc16is7xx_ops = { + .tx_empty = sc16is7xx_tx_empty, + .set_mctrl = sc16is7xx_set_mctrl, + .get_mctrl = sc16is7xx_get_mctrl, + .stop_tx = sc16is7xx_stop_tx, + .start_tx = sc16is7xx_start_tx, + .stop_rx = sc16is7xx_stop_rx, + .enable_ms = sc16is7xx_null_void, + .break_ctl = sc16is7xx_break_ctl, + .startup = sc16is7xx_startup, + .shutdown = sc16is7xx_shutdown, + .set_termios = sc16is7xx_set_termios, + .type = sc16is7xx_type, + .request_port = sc16is7xx_request_port, + .release_port = sc16is7xx_null_void, + .config_port = sc16is7xx_config_port, + .verify_port = sc16is7xx_verify_port, + .ioctl = sc16is7xx_ioctl, + .pm = sc16is7xx_pm, +}; + +#ifdef CONFIG_GPIOLIB +static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val; + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG); + + return !!(val & BIT(offset)); +} + +static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), + val ? BIT(offset) : 0); +} + +static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0); + + return 0; +} + +static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port, + gpio); + struct uart_port *port = &s->p[0].port; + + sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset), + val ? BIT(offset) : 0); + sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), + BIT(offset)); + + return 0; +} +#endif + +static int sc16is7xx_probe(struct device *dev, + struct sc16is7xx_devtype *devtype, + struct regmap *regmap, int irq, unsigned long flags) +{ + unsigned long freq, *pfreq = dev_get_platdata(dev); + struct clk *clk; + int i, ret; + struct sc16is7xx_port *s; + + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Alloc port structure */ + s = devm_kzalloc(dev, sizeof(*s) + + sizeof(struct sc16is7xx_one) * devtype->nr_uart, + GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) { + if (pfreq) + freq = *pfreq; + else + return PTR_ERR(clk); + } else { + freq = clk_get_rate(clk); + } + + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); + + /* Register UART driver */ + s->uart.owner = THIS_MODULE; + s->uart.dev_name = "ttySC"; + s->uart.nr = devtype->nr_uart; + ret = uart_register_driver(&s->uart); + if (ret) { + dev_err(dev, "Registering UART driver failed\n"); + goto out_clk; + } + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) { + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.dev = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr_gpio; + s->gpio.can_sleep = 1; + ret = gpiochip_add(&s->gpio); + if (ret) + goto out_uart; + } +#endif + + mutex_init(&s->mutex); + + for (i = 0; i < devtype->nr_uart; ++i) { + /* Initialize port data */ + s->p[i].port.line = i; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_SC16IS7XX; + s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.uartclk = freq; + s->p[i].port.ops = &sc16is7xx_ops; + /* Disable all interrupts */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); + /* Disable TX/RX */ + sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, + SC16IS7XX_EFCR_RXDISABLE_BIT | + SC16IS7XX_EFCR_TXDISABLE_BIT); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc); + /* Initialize queue for changing mode */ + INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc); + /* Register port */ + uart_add_one_port(&s->uart, &s->p[i].port); + /* Go to suspend mode */ + sc16is7xx_power(&s->p[i].port, 0); + } + + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist, + IRQF_ONESHOT | flags, dev_name(dev), s); + if (!ret) + return 0; + + mutex_destroy(&s->mutex); + +#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) + WARN_ON(gpiochip_remove(&s->gpio)); + +out_uart: +#endif + uart_unregister_driver(&s->uart); + +out_clk: + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return ret; +} + +static int sc16is7xx_remove(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i, ret = 0; + +#ifdef CONFIG_GPIOLIB + if (s->devtype->nr_gpio) { + ret = gpiochip_remove(&s->gpio); + if (ret) + return ret; + } +#endif + + for (i = 0; i < s->uart.nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); + uart_remove_one_port(&s->uart, &s->p[i].port); + sc16is7xx_power(&s->p[i].port, 0); + } + + mutex_destroy(&s->mutex); + uart_unregister_driver(&s->uart); + if (!IS_ERR(s->clk)) + clk_disable_unprepare(s->clk); + + return ret; +} + +static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { + { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, }, + { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, }, + { .compatible = "nxp,sc16is752", .data = &sc16is752_devtype, }, + { .compatible = "nxp,sc16is760", .data = &sc16is760_devtype, }, + { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 7, + .pad_bits = 1, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = sc16is7xx_regmap_volatile, + .precious_reg = sc16is7xx_regmap_precious, +}; + +#ifdef CONFIG_REGMAP_I2C +static int sc16is7xx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct sc16is7xx_devtype *devtype; + unsigned long flags = 0; + struct regmap *regmap; + + if (i2c->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(sc16is7xx_dt_ids, &i2c->dev); + + devtype = (struct sc16is7xx_devtype *)of_id->data; + } else { + devtype = (struct sc16is7xx_devtype *)id->driver_data; + flags = IRQF_TRIGGER_FALLING; + } + + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | + (devtype->nr_uart - 1); + regmap = devm_regmap_init_i2c(i2c, ®cfg); + + return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags); +} + +static int sc16is7xx_i2c_remove(struct i2c_client *client) +{ + return sc16is7xx_remove(&client->dev); +} + +static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table); + +static struct i2c_driver sc16is7xx_i2c_uart_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sc16is7xx_dt_ids), + }, + .probe = sc16is7xx_i2c_probe, + .remove = sc16is7xx_i2c_remove, + .id_table = sc16is7xx_i2c_id_table, +}; +module_i2c_driver(sc16is7xx_i2c_uart_driver); +MODULE_ALIAS("i2c:sc16is7xx"); +#endif + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jon Ringle "); +MODULE_DESCRIPTION("SC16IS7XX serial driver"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 6e293622851a..5820269aa132 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -241,4 +241,7 @@ /* MEN 16z135 UART */ #define PORT_MEN_Z135 107 +/* SC16IS74xx */ +#define PORT_SC16IS7XX 108 + #endif /* _UAPILINUX_SERIAL_CORE_H */ -- cgit v1.2.3 From d3bdba934239c91ec0b7c41b19c059e4c05dc138 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 25 Apr 2014 15:53:09 -0400 Subject: serial: sc16is7xx: depend on I2C Signed-off-by: Jon Ringle Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index c3e2b328327c..64c565945ac3 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1180,6 +1180,7 @@ config SERIAL_SCCNXP_CONSOLE config SERIAL_SC16IS7XX tristate "SC16IS7xx serial support" + depends on I2C select SERIAL_CORE select REGMAP_I2C if I2C help -- cgit v1.2.3 From d952795d8193c5a7a8eabdc14fab48777fdcd7c8 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 25 Apr 2014 15:53:10 -0400 Subject: serial: sc16is7xx: fix implicit decl of func copy_{to,from}_user Fix by including linux/uaccess.h: drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_ioctl': >> drivers/tty/serial/sc16is7xx.c:861:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] >> drivers/tty/serial/sc16is7xx.c:867:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] Signed-off-by: Jon Ringle Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ed139f5a6f74..7206a64f3ff7 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -25,6 +25,7 @@ #include #include #include +#include #define SC16IS7XX_NAME "sc16is7xx" -- cgit v1.2.3 From fe1cf8af918af3ff0dd58ce92e5a5da117cb1d92 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 30 Apr 2014 19:48:28 -0500 Subject: tty/serial: add back missing setup_early_serial8250_console Commit d2fd6810a823bcd (tty/serial: convert 8250 to generic earlycon) removed setup_early_serial8250_console, but there are still 2 callers in: arch/mips/mti-malta/malta-init.c drivers/firmware/pcdp.c Add back the function implemented as a wrapper to setup_earlycon. Reported-by: Yinghai Lu Cc: Jiri Slaby Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_early.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index e83c9db3300c..cfef801a49d4 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -156,6 +156,16 @@ static int __init early_serial8250_setup(struct earlycon_device *device, EARLYCON_DECLARE(uart8250, early_serial8250_setup); EARLYCON_DECLARE(uart, early_serial8250_setup); +int __init setup_early_serial8250_console(char *cmdline) +{ + char match[] = "uart8250"; + + if (cmdline && cmdline[4] == ',') + match[4] = '\0'; + + return setup_earlycon(cmdline, match, early_serial8250_setup); +} + int serial8250_find_port_for_earlycon(void) { struct earlycon_device *device = early_device; -- cgit v1.2.3 From e26f1db9b8d74617519e50b41749900d0a257406 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 30 Apr 2014 19:48:29 -0500 Subject: tty/serial: fix generic earlycon option parsing Commit 9aac5887595 (tty/serial: add generic serial earlycon) moved console option parsing from 8250_early.c and converted to kstrto* functions from simple_strtoul along the way. However, kstrto* functions are not equivalent in that they do not allow non-convertible characters at the end such as "115200n8". Fix this by changing back to simple_strtoul and ignore what checkpatch.pl says. Reported-by: Yinghai Lu Cc: Jiri Slaby Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/earlycon.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 73bf1e21aae0..c92e83088adb 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -53,7 +53,7 @@ static int __init parse_options(struct earlycon_device *device, char *options) { struct uart_port *port = &device->port; - int mmio, mmio32, length, ret; + int mmio, mmio32, length; unsigned long addr; if (!options) @@ -64,25 +64,19 @@ static int __init parse_options(struct earlycon_device *device, if (mmio || mmio32) { port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); options += mmio ? 5 : 7; - ret = kstrtoul(options, 0, &addr); - if (ret) - return ret; + addr = simple_strtoul(options, NULL, 0); port->mapbase = addr; if (mmio32) port->regshift = 2; } else if (!strncmp(options, "io,", 3)) { port->iotype = UPIO_PORT; options += 3; - ret = kstrtoul(options, 0, &addr); - if (ret) - return ret; + addr = simple_strtoul(options, NULL, 0); port->iobase = addr; mmio = 0; } else if (!strncmp(options, "0x", 2)) { port->iotype = UPIO_MEM; - ret = kstrtoul(options, 0, &addr); - if (ret) - return ret; + addr = simple_strtoul(options, NULL, 0); port->mapbase = addr; } else { return -EINVAL; @@ -93,9 +87,7 @@ static int __init parse_options(struct earlycon_device *device, options = strchr(options, ','); if (options) { options++; - ret = kstrtouint(options, 0, &device->baud); - if (ret) - return ret; + device->baud = simple_strtoul(options, NULL, 0); length = min(strcspn(options, " ") + 1, (size_t)(sizeof(device->options))); strlcpy(device->options, options, length); -- cgit v1.2.3 From b8658bc81089d656fe54b12e21f0cae5116b6483 Mon Sep 17 00:00:00 2001 From: Jun Tian Date: Mon, 12 May 2014 16:55:26 +0100 Subject: goldfish: enable 64-bit tty driver Signed-off-by: Jun Tian Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/goldfish.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 75dc9d25f326..08167aa093b2 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -29,6 +29,9 @@ enum { GOLDFISH_TTY_DATA_PTR = 0x10, GOLDFISH_TTY_DATA_LEN = 0x14, +#ifdef CONFIG_64BIT + GOLDFISH_TTY_DATA_PTR_HIGH = 0x18, +#endif GOLDFISH_TTY_CMD_INT_DISABLE = 0, GOLDFISH_TTY_CMD_INT_ENABLE = 1, @@ -58,6 +61,9 @@ static void goldfish_tty_do_write(int line, const char *buf, unsigned count) void __iomem *base = qtty->base; spin_lock_irqsave(&qtty->lock, irq_flags); writel((u32)buf, base + GOLDFISH_TTY_DATA_PTR); +#ifdef CONFIG_64BIT + writel((u32)((u64)buf >> 32), base + GOLDFISH_TTY_DATA_PTR_HIGH); +#endif writel(count, base + GOLDFISH_TTY_DATA_LEN); writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, base + GOLDFISH_TTY_CMD); spin_unlock_irqrestore(&qtty->lock, irq_flags); @@ -79,6 +85,9 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) count = tty_prepare_flip_string(&qtty->port, &buf, count); spin_lock_irqsave(&qtty->lock, irq_flags); writel((u32)buf, base + GOLDFISH_TTY_DATA_PTR); +#ifdef CONFIG_64BIT + writel((u32)((u64)buf >> 32), base + GOLDFISH_TTY_DATA_PTR_HIGH); +#endif writel(count, base + GOLDFISH_TTY_DATA_LEN); writel(GOLDFISH_TTY_CMD_READ_BUFFER, base + GOLDFISH_TTY_CMD); spin_unlock_irqrestore(&qtty->lock, irq_flags); -- cgit v1.2.3 From e0f682e05f51c9eff68e61ce2350155895cd739e Mon Sep 17 00:00:00 2001 From: Alan Date: Mon, 12 May 2014 16:57:05 +0100 Subject: goldfish: clean up tty 64bit support Use the helper we now have available. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/goldfish.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 08167aa093b2..7eaafe3c80dc 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -21,6 +21,7 @@ #include #include #include +#include enum { GOLDFISH_TTY_PUT_CHAR = 0x00, @@ -29,9 +30,7 @@ enum { GOLDFISH_TTY_DATA_PTR = 0x10, GOLDFISH_TTY_DATA_LEN = 0x14, -#ifdef CONFIG_64BIT GOLDFISH_TTY_DATA_PTR_HIGH = 0x18, -#endif GOLDFISH_TTY_CMD_INT_DISABLE = 0, GOLDFISH_TTY_CMD_INT_ENABLE = 1, @@ -60,10 +59,8 @@ static void goldfish_tty_do_write(int line, const char *buf, unsigned count) struct goldfish_tty *qtty = &goldfish_ttys[line]; void __iomem *base = qtty->base; spin_lock_irqsave(&qtty->lock, irq_flags); - writel((u32)buf, base + GOLDFISH_TTY_DATA_PTR); -#ifdef CONFIG_64BIT - writel((u32)((u64)buf >> 32), base + GOLDFISH_TTY_DATA_PTR_HIGH); -#endif + gf_write64((u64)buf, base + GOLDFISH_TTY_DATA_PTR, + base + GOLDFISH_TTY_DATA_PTR_HIGH); writel(count, base + GOLDFISH_TTY_DATA_LEN); writel(GOLDFISH_TTY_CMD_WRITE_BUFFER, base + GOLDFISH_TTY_CMD); spin_unlock_irqrestore(&qtty->lock, irq_flags); @@ -84,10 +81,8 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) count = tty_prepare_flip_string(&qtty->port, &buf, count); spin_lock_irqsave(&qtty->lock, irq_flags); - writel((u32)buf, base + GOLDFISH_TTY_DATA_PTR); -#ifdef CONFIG_64BIT - writel((u32)((u64)buf >> 32), base + GOLDFISH_TTY_DATA_PTR_HIGH); -#endif + gf_write64((u64)buf, base + GOLDFISH_TTY_DATA_PTR, + base + GOLDFISH_TTY_DATA_PTR_HIGH); writel(count, base + GOLDFISH_TTY_DATA_LEN); writel(GOLDFISH_TTY_CMD_READ_BUFFER, base + GOLDFISH_TTY_CMD); spin_unlock_irqrestore(&qtty->lock, irq_flags); -- cgit v1.2.3 From d78055dc9c786b392ce7b593c479bb9a3e1da61d Mon Sep 17 00:00:00 2001 From: Alan Date: Mon, 12 May 2014 16:57:14 +0100 Subject: goldfish: clean up the checkpatch warnings Mostly spacing changes, also making the operations structure const Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/goldfish.c | 60 ++++++++++++++++++++++++++++---------------------- 1 file changed, 34 insertions(+), 26 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 7eaafe3c80dc..09495f515fa9 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -76,7 +76,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) u32 count; count = readl(base + GOLDFISH_TTY_BYTES_READY); - if(count == 0) + if (count == 0) return IRQ_NONE; count = tty_prepare_flip_string(&qtty->port, &buf, count); @@ -92,24 +92,26 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id) static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty) { - struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, port); + struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, + port); writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_CMD); return 0; } static void goldfish_tty_shutdown(struct tty_port *port) { - struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, port); + struct goldfish_tty *qtty = container_of(port, struct goldfish_tty, + port); writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_CMD); } -static int goldfish_tty_open(struct tty_struct * tty, struct file * filp) +static int goldfish_tty_open(struct tty_struct *tty, struct file *filp) { struct goldfish_tty *qtty = &goldfish_ttys[tty->index]; return tty_port_open(&qtty->port, tty, filp); } -static void goldfish_tty_close(struct tty_struct * tty, struct file * filp) +static void goldfish_tty_close(struct tty_struct *tty, struct file *filp) { tty_port_close(tty->port, tty, filp); } @@ -119,7 +121,8 @@ static void goldfish_tty_hangup(struct tty_struct *tty) tty_port_hangup(tty->port); } -static int goldfish_tty_write(struct tty_struct * tty, const unsigned char *buf, int count) +static int goldfish_tty_write(struct tty_struct *tty, const unsigned char *buf, + int count) { goldfish_tty_do_write(tty->index, buf, count); return count; @@ -137,12 +140,14 @@ static int goldfish_tty_chars_in_buffer(struct tty_struct *tty) return readl(base + GOLDFISH_TTY_BYTES_READY); } -static void goldfish_tty_console_write(struct console *co, const char *b, unsigned count) +static void goldfish_tty_console_write(struct console *co, const char *b, + unsigned count) { goldfish_tty_do_write(co->index, b, count); } -static struct tty_driver *goldfish_tty_console_device(struct console *c, int *index) +static struct tty_driver *goldfish_tty_console_device(struct console *c, + int *index) { *index = c->index; return goldfish_tty_driver; @@ -150,9 +155,9 @@ static struct tty_driver *goldfish_tty_console_device(struct console *c, int *in static int goldfish_tty_console_setup(struct console *co, char *options) { - if((unsigned)co->index > goldfish_tty_line_count) + if ((unsigned)co->index > goldfish_tty_line_count) return -ENODEV; - if(goldfish_ttys[co->index].base == 0) + if (goldfish_ttys[co->index].base == 0) return -ENODEV; return 0; } @@ -162,7 +167,7 @@ static struct tty_port_operations goldfish_port_ops = { .shutdown = goldfish_tty_shutdown }; -static struct tty_operations goldfish_tty_ops = { +static const struct tty_operations goldfish_tty_ops = { .open = goldfish_tty_open, .close = goldfish_tty_close, .hangup = goldfish_tty_hangup, @@ -176,13 +181,14 @@ static int goldfish_tty_create_driver(void) int ret; struct tty_driver *tty; - goldfish_ttys = kzalloc(sizeof(*goldfish_ttys) * goldfish_tty_line_count, GFP_KERNEL); - if(goldfish_ttys == NULL) { + goldfish_ttys = kzalloc(sizeof(*goldfish_ttys) * + goldfish_tty_line_count, GFP_KERNEL); + if (goldfish_ttys == NULL) { ret = -ENOMEM; goto err_alloc_goldfish_ttys_failed; } tty = alloc_tty_driver(goldfish_tty_line_count); - if(tty == NULL) { + if (tty == NULL) { ret = -ENOMEM; goto err_alloc_tty_driver_failed; } @@ -191,10 +197,11 @@ static int goldfish_tty_create_driver(void) tty->type = TTY_DRIVER_TYPE_SERIAL; tty->subtype = SERIAL_TYPE_NORMAL; tty->init_termios = tty_std_termios; - tty->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; tty_set_operations(tty, &goldfish_tty_ops); ret = tty_register_driver(tty); - if(ret) + if (ret) goto err_tty_register_driver_failed; goldfish_tty_driver = tty; @@ -229,7 +236,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) u32 irq; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if(r == NULL) + if (r == NULL) return -EINVAL; base = ioremap(r->start, 0x1000); @@ -237,18 +244,18 @@ static int goldfish_tty_probe(struct platform_device *pdev) pr_err("goldfish_tty: unable to remap base\n"); r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if(r == NULL) + if (r == NULL) goto err_unmap; irq = r->start; - if(pdev->id >= goldfish_tty_line_count) + if (pdev->id >= goldfish_tty_line_count) goto err_unmap; mutex_lock(&goldfish_tty_lock); - if(goldfish_tty_current_line_count == 0) { + if (goldfish_tty_current_line_count == 0) { ret = goldfish_tty_create_driver(); - if(ret) + if (ret) goto err_create_driver_failed; } goldfish_tty_current_line_count++; @@ -262,14 +269,15 @@ static int goldfish_tty_probe(struct platform_device *pdev) writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_CMD); - ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED, "goldfish_tty", pdev); - if(ret) + ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED, + "goldfish_tty", pdev); + if (ret) goto err_request_irq_failed; ttydev = tty_port_register_device(&qtty->port, goldfish_tty_driver, pdev->id, &pdev->dev); - if(IS_ERR(ttydev)) { + if (IS_ERR(ttydev)) { ret = PTR_ERR(ttydev); goto err_tty_register_device_failed; } @@ -290,7 +298,7 @@ err_tty_register_device_failed: free_irq(irq, pdev); err_request_irq_failed: goldfish_tty_current_line_count--; - if(goldfish_tty_current_line_count == 0) + if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); err_create_driver_failed: mutex_unlock(&goldfish_tty_lock); @@ -312,7 +320,7 @@ static int goldfish_tty_remove(struct platform_device *pdev) qtty->base = 0; free_irq(qtty->irq, pdev); goldfish_tty_current_line_count--; - if(goldfish_tty_current_line_count == 0) + if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); mutex_unlock(&goldfish_tty_lock); return 0; -- cgit v1.2.3 From 651fb13943304be2008b43adf813fa62435423d7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 7 May 2014 15:44:15 +0000 Subject: tile: serial: Use irq_alloc/free_hwirq No functional change. Just convert to the new interface. Signed-off-by: Thomas Gleixner Reviewed-by: Grant Likely Cc: Tony Luck Cc: Peter Zijlstra Acked-by: Chris Metcalf Link: http://lkml.kernel.org/r/20140507154337.643399187@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/tty/serial/tilegx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/tilegx.c b/drivers/tty/serial/tilegx.c index f92d7e6bd876..613ccf09dc2a 100644 --- a/drivers/tty/serial/tilegx.c +++ b/drivers/tty/serial/tilegx.c @@ -359,8 +359,8 @@ static int tilegx_startup(struct uart_port *port) } /* Create our IRQs. */ - port->irq = create_irq(); - if (port->irq < 0) + port->irq = irq_alloc_hwirq(-1); + if (!port->irq) goto err_uart_dest; tile_irq_activate(port->irq, TILE_IRQ_PERCPU); @@ -395,7 +395,7 @@ static int tilegx_startup(struct uart_port *port) err_free_irq: free_irq(port->irq, port); err_dest_irq: - destroy_irq(port->irq); + irq_free_hwirq(port->irq); err_uart_dest: gxio_uart_destroy(context); ret = -ENXIO; @@ -435,7 +435,7 @@ static void tilegx_shutdown(struct uart_port *port) if (port->irq > 0) { free_irq(port->irq, port); - destroy_irq(port->irq); + irq_free_hwirq(port->irq); port->irq = 0; } -- cgit v1.2.3 From 3dfd442e5ffc6c488e34b6f1028bbb0ce310e6c4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 7 May 2014 15:44:15 +0000 Subject: tile: hvc: Use irq_alloc/free_hwirq No functional change. Just convert to the new interface. Signed-off-by: Thomas Gleixner Reviewed-by: Grant Likely Cc: Tony Luck Cc: Peter Zijlstra Acked-by: Chris Metcalf Link: http://lkml.kernel.org/r/20140507154337.873477334@linutronix.de Signed-off-by: Thomas Gleixner --- drivers/tty/hvc/hvc_tile.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/hvc/hvc_tile.c b/drivers/tty/hvc/hvc_tile.c index af8cdaa1dcb9..147d49e95db2 100644 --- a/drivers/tty/hvc/hvc_tile.c +++ b/drivers/tty/hvc/hvc_tile.c @@ -133,14 +133,14 @@ static int hvc_tile_probe(struct platform_device *pdev) int tile_hvc_irq; /* Create our IRQ and register it. */ - tile_hvc_irq = create_irq(); - if (tile_hvc_irq < 0) + tile_hvc_irq = irq_alloc_hwirq(-1); + if (!tile_hvc_irq) return -ENXIO; tile_irq_activate(tile_hvc_irq, TILE_IRQ_PERCPU); hp = hvc_alloc(0, tile_hvc_irq, &hvc_tile_get_put_ops, 128); if (IS_ERR(hp)) { - destroy_irq(tile_hvc_irq); + irq_free_hwirq(tile_hvc_irq); return PTR_ERR(hp); } dev_set_drvdata(&pdev->dev, hp); @@ -155,7 +155,7 @@ static int hvc_tile_remove(struct platform_device *pdev) rc = hvc_remove(hp); if (rc == 0) - destroy_irq(hp->data); + irq_free_hwirq(hp->data); return rc; } -- cgit v1.2.3 From b0b6abd34c1b508d4ac95dbc614f36c49d29e65a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 27 Mar 2014 08:06:16 -0500 Subject: serial: earlycon: add DT support This adds the infrastructure to generic earlycon for earlycon setup using DT. The actual setup is not enabled until a following commit to add the FDT parsing. Signed-off-by: Rob Herring Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Arnd Bergmann Acked-by: Grant Likely --- drivers/tty/serial/earlycon.c | 28 ++++++++++++++++++++++++++++ include/asm-generic/vmlinux.lds.h | 4 +++- include/linux/serial_core.h | 6 ++++++ 3 files changed, 37 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index c92e83088adb..5131b5ee6164 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -15,6 +15,8 @@ #include #include #include +#include +#include #ifdef CONFIG_FIX_EARLYCON_MEM #include @@ -32,6 +34,9 @@ static struct earlycon_device early_console_dev = { .con = &early_con, }; +static const struct of_device_id __earlycon_of_table_sentinel + __used __section(__earlycon_of_table_end); + static void __iomem * __init earlycon_map(unsigned long paddr, size_t size) { void __iomem *base; @@ -142,3 +147,26 @@ int __init setup_earlycon(char *buf, const char *match, register_console(early_console_dev.con); return 0; } + +int __init of_setup_earlycon(unsigned long addr, + int (*setup)(struct earlycon_device *, const char *)) +{ + int err; + struct uart_port *port = &early_console_dev.port; + + port->iotype = UPIO_MEM; + port->mapbase = addr; + port->uartclk = BASE_BAUD * 16; + port->membase = earlycon_map(addr, SZ_4K); + + early_console_dev.con->data = &early_console_dev; + err = setup(&early_console_dev, NULL); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + + register_console(early_console_dev.con); + return 0; +} diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index b9404f6590f1..d647637cd699 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -155,6 +155,7 @@ #define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk) #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem) #define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method) +#define EARLYCON_OF_TABLES() OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon) #define KERNEL_DTB() \ STRUCT_ALIGN(); \ @@ -483,7 +484,8 @@ CLKSRC_OF_TABLES() \ CPU_METHOD_OF_TABLES() \ KERNEL_DTB() \ - IRQCHIP_OF_MATCH_TABLE() + IRQCHIP_OF_MATCH_TABLE() \ + EARLYCON_OF_TABLES() #define INIT_TEXT \ *(.init.text) \ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 7a15b5b24c0b..5bbb809ee197 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -294,6 +294,9 @@ struct earlycon_device { int setup_earlycon(char *buf, const char *match, int (*setup)(struct earlycon_device *, const char *)); +extern int of_setup_earlycon(unsigned long addr, + int (*setup)(struct earlycon_device *, const char *)); + #define EARLYCON_DECLARE(name, func) \ static int __init name ## _setup_earlycon(char *buf) \ { \ @@ -301,6 +304,9 @@ static int __init name ## _setup_earlycon(char *buf) \ } \ early_param("earlycon", name ## _setup_earlycon); +#define OF_EARLYCON_DECLARE(name, compat, fn) \ + _OF_DECLARE(earlycon, name, compat, fn, void *) + struct uart_port *uart_get_console(struct uart_port *ports, int nr, struct console *c); void uart_parse_options(char *options, int *baud, int *parity, int *bits, -- cgit v1.2.3 From 45e0f0f5684327a72866a34aedc3fcf8eec51889 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 27 Mar 2014 08:08:03 -0500 Subject: tty/serial: pl011: add DT based earlycon support Enable DT based earlycon initialization for the pl011 uart. Signed-off-by: Rob Herring Cc: Russell King Cc: Greg Kroah-Hartman Cc: Jiri Slaby Acked-by: Grant Likely --- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index ee3d80346780..908a6e3142a2 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2072,6 +2072,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device, return 0; } EARLYCON_DECLARE(pl011, pl011_early_console_setup); +OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); #else #define AMBA_CONSOLE NULL -- cgit v1.2.3 From 0667934567a9d05fad5bdf2ca0546b04a1e64dfe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 16 May 2014 10:48:50 +0200 Subject: serial: pch_uart: Fix Kconfig dependencies The pch_uart driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Add COMPILE_TEST as an alternative, so that the driver can still be build-tested elsewhere. Signed-off-by: Jean Delvare Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 64c565945ac3..ab81a291afdb 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1351,7 +1351,7 @@ config SERIAL_IFX6X60 config SERIAL_PCH_UART tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) select SERIAL_CORE help This driver is for PCH(Platform controller Hub) UART of Intel EG20T -- cgit v1.2.3 From 361746264b5e875e9b3c6f5b844accfe629e28bb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 25 Apr 2014 11:02:13 +0200 Subject: tty: n_hdlc: Drop redundant error message On initialization failure, an error message is already printed with level KERN_ERR, no need to print another one with level KERN_INFO. Signed-off-by: Jean Delvare Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_hdlc.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 1b2db9a3038c..ef42942a9390 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -952,8 +952,6 @@ static char hdlc_register_ok[] __initdata = KERN_INFO "N_HDLC line discipline registered.\n"; static char hdlc_register_fail[] __initdata = KERN_ERR "error registering line discipline: %d\n"; -static char hdlc_init_fail[] __initdata = - KERN_INFO "N_HDLC: init failure %d\n"; static int __init n_hdlc_init(void) { @@ -973,8 +971,6 @@ static int __init n_hdlc_init(void) else printk(hdlc_register_fail, status); - if (status) - printk(hdlc_init_fail, status); return status; } /* end of init_module() */ -- cgit v1.2.3 From 3df5adb23f115a5d2c7ca10fc66a5b9176cedc49 Mon Sep 17 00:00:00 2001 From: Jan Moskyto Matejka Date: Fri, 2 May 2014 14:02:25 +0200 Subject: serial: sc16is7xx: compile I2C when REGMAP_I2C is module drivers/tty/serial/sc16is7xx.c:1060:12: warning: 'sc16is7xx_probe' defined but not used [-Wunused-function] static int sc16is7xx_probe(struct device *dev, ^ drivers/tty/serial/sc16is7xx.c:1176:12: warning: 'sc16is7xx_remove' defined but not used [-Wunused-function] static int sc16is7xx_remove(struct device *dev) ^ drivers/tty/serial/sc16is7xx.c:1215:29: warning: 'regcfg' defined but not used [-Wunused-variable] static struct regmap_config regcfg = { ^ Fixed these warnings by removing the `#ifdef CONFIG_REGMAP_I2C' around their calls as this driver selects REGMAP_I2C in Kconfig. This part of driver just didn't compile at all when REGMAP_I2C configured as module (CONFIG_REGMAP_I2C is not defined, just CONFIG_REGMAP_I2C_MODULE). Signed-off-by: Jan Moskyto Matejka Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7206a64f3ff7..80b0ca68f6e2 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1221,7 +1221,6 @@ static struct regmap_config regcfg = { .precious_reg = sc16is7xx_regmap_precious, }; -#ifdef CONFIG_REGMAP_I2C static int sc16is7xx_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1273,7 +1272,6 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = { }; module_i2c_driver(sc16is7xx_i2c_uart_driver); MODULE_ALIAS("i2c:sc16is7xx"); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jon Ringle "); -- cgit v1.2.3 From beb04a9f04d95b0d1fdb96719559612705dfc1c9 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 25 Apr 2014 20:11:07 -0400 Subject: serial: sc16is7xx: dynamically allocate tx/rx buffer This fixes the warnings: drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_rx': >> drivers/tty/serial/sc16is7xx.c:548:1: warning: 'sc16is7xx_handle_rx' uses dynamic stack allocation [enabled by default] drivers/tty/serial/sc16is7xx.c: In function 'sc16is7xx_handle_tx': >> drivers/tty/serial/sc16is7xx.c:589:1: warning: 'sc16is7xx_handle_tx' uses dynamic stack allocation [enabled by default] Signed-off-by: Jon Ringle Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 80b0ca68f6e2..1b6a77c4b2cb 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -317,6 +317,7 @@ struct sc16is7xx_port { #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif + unsigned char buf[SC16IS7XX_FIFO_SIZE]; struct sc16is7xx_one p[0]; }; @@ -471,16 +472,15 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, { struct sc16is7xx_port *s = dev_get_drvdata(port->dev); unsigned int lsr = 0, ch, flag, bytes_read, i; - u8 buf[port->fifosize]; bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false; - if (unlikely(rxlen >= port->fifosize)) { + if (unlikely(rxlen >= sizeof(s->buf))) { dev_warn_ratelimited(port->dev, "Port %i: Possible RX FIFO overrun: %d\n", port->line, rxlen); port->icount.buf_overrun++; /* Ensure sanity of RX level */ - rxlen = port->fifosize; + rxlen = sizeof(s->buf); } while (rxlen) { @@ -493,12 +493,12 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, lsr = 0; if (read_lsr) { - buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); + s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG); bytes_read = 1; } else { regcache_cache_bypass(s->regmap, true); regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG, - buf, rxlen); + s->buf, rxlen); regcache_cache_bypass(s->regmap, false); bytes_read = rxlen; } @@ -532,7 +532,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen, } for (i = 0; i < bytes_read; ++i) { - ch = buf[i]; + ch = s->buf[i]; if (uart_handle_sysrq_char(port, ch)) continue; @@ -553,7 +553,6 @@ static void sc16is7xx_handle_tx(struct uart_port *port) struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct circ_buf *xmit = &port->state->xmit; unsigned int txlen, to_send, i; - u8 buf[port->fifosize]; if (unlikely(port->x_char)) { sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char); @@ -577,11 +576,11 @@ static void sc16is7xx_handle_tx(struct uart_port *port) /* Convert to linear buffer */ for (i = 0; i < to_send; ++i) { - buf[i] = xmit->buf[xmit->tail]; + s->buf[i] = xmit->buf[xmit->tail]; xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); } regcache_cache_bypass(s->regmap, true); - regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, buf, to_send); + regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send); regcache_cache_bypass(s->regmap, false); } -- cgit v1.2.3 From 717e1cb22f01ddeaaeddc126fed43f975c920d97 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 29 Apr 2014 22:26:22 +0200 Subject: serial: add missing SERIAL_CORE dependencies Two new drivers have been added since 3.14, the MEN 16z135 uart, and the ARM semihosting console. Both are missing an explicit 'select SERIAL_CORE', which can leads build errors when no other driver selects the core, as found during ARM randconfig testing. In case of the ARM semihosting console, we also have to select SERIAL_CORE_CONSOLE. This adds the missing 'select' statements. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index ab81a291afdb..6ed61ec670f5 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -76,6 +76,8 @@ config SERIAL_AMBA_PL011_CONSOLE config SERIAL_EARLYCON_ARM_SEMIHOST bool "Early console using ARM semihosting" depends on ARM64 || ARM + select SERIAL_CORE + select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help Support for early debug console using ARM semihosting. This enables @@ -1539,6 +1541,7 @@ config SERIAL_ST_ASC_CONSOLE config SERIAL_MEN_Z135 tristate "MEN 16z135 Support" + select SERIAL_CORE depends on MCB help Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core -- cgit v1.2.3 From 205c384f73e56d6b7d309b883a2064cd07ab5427 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Mon, 5 May 2014 08:05:51 +0800 Subject: serial: sirf: move to writel for TXFIFO instead of writeb All SiRFSoC UART registers are in 32-bits. If we use writeb for TXFIFO, actually all of 32-bits are still written, for TXTIFO, only low 8-bits are valid, so in prima2&atlas6, this causes no problem. But in the new atlas7, using writeb to write UART registers will cause an imprecise data abort as HW does check the "wrong" writeb. So move to writel and this also makes the code consistent with sirfsoc_uart_pio_tx_chars() in which we use writel. Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 2 +- drivers/tty/serial/sirfsoc_uart.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 68b0fd4b9a6a..845548cf05f8 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -1228,7 +1228,7 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line)) cpu_relax(); - wr_regb(port, ureg->sirfsoc_tx_fifo_data, ch); + wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch); } static void sirfsoc_uart_console_write(struct console *co, const char *s, diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 8a6eddad2f3c..4280819e1888 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -441,9 +441,7 @@ struct sirfsoc_uart_port { /* Register Access Control */ #define portaddr(port, reg) ((port)->membase + (reg)) -#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) #define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) -#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) /* UART Port Mask */ -- cgit v1.2.3 From 07d410e06463f3c1c106e2bb2a7ff23eff1e71c9 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 26 May 2014 19:02:07 +0800 Subject: serial: sirf: fix spinlock deadlock issue commit fb78b811422cd2d8c8605949cc4cc13618347ad5 provide a workaround for kernel panic, but bring potential deadlock risk. that is in sirfsoc_rx_tmo_process_tl while enter into sirfsoc_uart_pio_rx_chars cpu hold uart_port->lock, if uart interrupt comes cpu enter into sirfsoc_uart_isr and deadlock occurs in getting uart_port->lock. the patch replace spin_lock version to spin_lock_irq* version to avoid spinlock dead lock issue. let function tty_flip_buffer_push in tasklet outof spin_lock_irq* protect area to avoid add the pair of spin_lock and spin_unlock for tty_flip_buffer_push. BTW drop self defined unused spinlock protect of tx_lock/rx_lock. 56274.220464] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 [56274.223648] lock: 0xc05d9db0, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 [56274.231278] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.35 #1 [56274.238241] [] (unwind_backtrace+0x0/0xf4) from [] (show_stack+0x10/0x14) [56274.246742] [] (show_stack+0x10/0x14) from [] (do_raw_spin_lock+0x110/0x184) [56274.255501] [] (do_raw_spin_lock+0x110/0x184) from [] (sirfsoc_uart_isr+0x20/0x42c) [56274.264874] [] (sirfsoc_uart_isr+0x20/0x42c) from [] (handle_irq_event_percpu+0x54/0x17c) [56274.274758] [] (handle_irq_event_percpu+0x54/0x17c) from [] (handle_irq_event+0x3c/0x5c) [56274.284561] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0x98/0xfc) [56274.293670] [] (handle_level_irq+0x98/0xfc) from [] (generic_handle_irq+0x2c/0x3c) [56274.302952] [] (generic_handle_irq+0x2c/0x3c) from [] (handle_IRQ+0x40/0x90) [56274.311706] [] (handle_IRQ+0x40/0x90) from [] (__irq_svc+0x40/0x70) [56274.319697] [] (__irq_svc+0x40/0x70) from [] (_raw_spin_unlock_irqrestore+0x10/0x48) [56274.329158] [] (_raw_spin_unlock_irqrestore+0x10/0x48) from [] (tty_port_tty_get+0x58/0x90) [56274.339213] [] (tty_port_tty_get+0x58/0x90) from [] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) [56274.349097] [] (sirfsoc_uart_pio_rx_chars+0x1c/0xc8) from [] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) [56274.359853] [] (sirfsoc_rx_tmo_process_tl+0xe4/0x1fc) from [] (tasklet_action+0x84/0x114) [56274.369739] [] (tasklet_action+0x84/0x114) from [] (__do_softirq+0x120/0x200) [56274.378585] [] (__do_softirq+0x120/0x200) from [] (do_softirq+0x54/0x5c) [56274.386998] [] (do_softirq+0x54/0x5c) from [] (irq_exit+0x9c/0xd0) [56274.394899] [] (irq_exit+0x9c/0xd0) from [] (handle_IRQ+0x44/0x90) [56274.402790] [] (handle_IRQ+0x44/0x90) from [] (__irq_svc+0x40/0x70) [56274.410774] [] (__irq_svc+0x40/0x70) from [] (cpuidle_enter_state+0x50/0xe0) [56274.419532] [] (cpuidle_enter_state+0x50/0xe0) from [] (cpuidle_idle_call+0xb0/0x148) [56274.429080] [] (cpuidle_idle_call+0xb0/0x148) from [] (arch_cpu_idle+0x8/0x38) [56274.438016] [] (arch_cpu_idle+0x8/0x38) from [] (cpu_startup_entry+0xfc/0x140) [56274.446956] [] (cpu_startup_entry+0xfc/0x140) from [] (start_kernel+0x2d8/0x2e4) Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 49 ++++++++++++++------------------------- drivers/tty/serial/sirfsoc_uart.h | 2 -- 2 files changed, 18 insertions(+), 33 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 845548cf05f8..236f892dab9c 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -358,9 +358,11 @@ static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id) { struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; struct uart_port *port = &sirfport->port; + spin_lock(&port->lock); if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled) uart_handle_cts_change(port, !gpio_get_value(sirfport->cts_gpio)); + spin_unlock(&port->lock); return IRQ_HANDLED; } @@ -428,10 +430,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) sirfport->rx_io_count += rx_count; port->icount.rx += rx_count; - spin_unlock(&port->lock); - tty_flip_buffer_push(&port->state->port); - spin_lock(&port->lock); - return rx_count; } @@ -465,6 +463,7 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param) struct circ_buf *xmit = &port->state->xmit; unsigned long flags; + spin_lock_irqsave(&port->lock, flags); xmit->tail = (xmit->tail + sirfport->transfer_size) & (UART_XMIT_SIZE - 1); port->icount.tx += sirfport->transfer_size; @@ -473,10 +472,9 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param) if (sirfport->tx_dma_addr) dma_unmap_single(port->dev, sirfport->tx_dma_addr, sirfport->transfer_size, DMA_TO_DEVICE); - spin_lock_irqsave(&sirfport->tx_lock, flags); sirfport->tx_dma_state = TX_DMA_IDLE; sirfsoc_uart_tx_with_dma(sirfport); - spin_unlock_irqrestore(&sirfport->tx_lock, flags); + spin_unlock_irqrestore(&port->lock, flags); } static void sirfsoc_uart_insert_rx_buf_to_tty( @@ -489,7 +487,6 @@ static void sirfsoc_uart_insert_rx_buf_to_tty( inserted = tty_insert_flip_string(tport, sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count); port->icount.rx += inserted; - tty_flip_buffer_push(tport); } static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index) @@ -525,7 +522,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) unsigned long flags; struct dma_tx_state tx_state; - spin_lock_irqsave(&sirfport->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport, @@ -541,12 +538,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | SIRFUART_IO_MODE); - spin_unlock_irqrestore(&sirfport->rx_lock, flags); - spin_lock(&port->lock); sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); - spin_unlock(&port->lock); if (sirfport->rx_io_count == 4) { - spin_lock_irqsave(&sirfport->rx_lock, flags); sirfport->rx_io_count = 0; wr_regl(port, ureg->sirfsoc_int_st_reg, uint_st->sirfsoc_rx_done); @@ -557,11 +550,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) else wr_regl(port, SIRFUART_INT_EN_CLR, uint_en->sirfsoc_rx_done_en); - spin_unlock_irqrestore(&sirfport->rx_lock, flags); - sirfsoc_uart_start_next_rx_dma(port); } else { - spin_lock_irqsave(&sirfport->rx_lock, flags); wr_regl(port, ureg->sirfsoc_int_st_reg, uint_st->sirfsoc_rx_done); if (!sirfport->is_marco) @@ -571,8 +561,9 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) else wr_regl(port, ureg->sirfsoc_int_en_reg, uint_en->sirfsoc_rx_done_en); - spin_unlock_irqrestore(&sirfport->rx_lock, flags); } + spin_unlock_irqrestore(&port->lock, flags); + tty_flip_buffer_push(&port->state->port); } static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) @@ -581,8 +572,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; struct dma_tx_state tx_state; - spin_lock(&sirfport->rx_lock); - dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state); dmaengine_terminate_all(sirfport->rx_dma_chan); @@ -595,7 +584,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) else wr_regl(port, SIRFUART_INT_EN_CLR, uint_en->sirfsoc_rx_timeout_en); - spin_unlock(&sirfport->rx_lock); tasklet_schedule(&sirfport->rx_tmo_process_tasklet); } @@ -659,7 +647,6 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) intr_status &= port->read_status_mask; uart_insert_char(port, intr_status, uint_en->sirfsoc_rx_oflow_en, 0, flag); - tty_flip_buffer_push(&state->port); } recv_char: if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) && @@ -684,6 +671,9 @@ recv_char: sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT); } + spin_unlock(&port->lock); + tty_flip_buffer_push(&state->port); + spin_lock(&port->lock); if (intr_status & uint_st->sirfsoc_txfifo_empty) { if (sirfport->tx_dma_chan) sirfsoc_uart_tx_with_dma(sirfport); @@ -702,6 +692,7 @@ recv_char: } } spin_unlock(&port->lock); + return IRQ_HANDLED; } @@ -713,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long flags; struct dma_tx_state tx_state; - spin_lock_irqsave(&sirfport->rx_lock, flags); + spin_lock_irqsave(&port->rx_lock, flags); while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport, @@ -726,17 +717,20 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) sirfport->rx_completed++; sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT; } - spin_unlock_irqrestore(&sirfport->rx_lock, flags); + spin_unlock_irqrestore(&port->lock, flags); + tty_flip_buffer_push(&port->state->port); } static void sirfsoc_uart_rx_dma_complete_callback(void *param) { struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; - spin_lock(&sirfport->rx_lock); + unsigned long flags; + + spin_lock_irqsave(&sirfport->port.lock, flags); sirfport->rx_issued++; sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT; - spin_unlock(&sirfport->rx_lock); tasklet_schedule(&sirfport->rx_dma_complete_tasklet); + spin_unlock_irqrestore(&sirfport->port.lock, flags); } /* submit rx dma task into dmaengine */ @@ -745,18 +739,14 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long flags; int i; - spin_lock_irqsave(&sirfport->rx_lock, flags); sirfport->rx_io_count = 0; wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & ~SIRFUART_IO_MODE); - spin_unlock_irqrestore(&sirfport->rx_lock, flags); for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) sirfsoc_rx_submit_one_dma_desc(port, i); sirfport->rx_completed = sirfport->rx_issued = 0; - spin_lock_irqsave(&sirfport->rx_lock, flags); if (!sirfport->is_marco) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | @@ -764,7 +754,6 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) else wr_regl(port, ureg->sirfsoc_int_en_reg, SIRFUART_RX_DMA_INT_EN(port, uint_en)); - spin_unlock_irqrestore(&sirfport->rx_lock, flags); } static void sirfsoc_uart_start_rx(struct uart_port *port) @@ -1369,8 +1358,6 @@ usp_no_flow_control: ret = -EFAULT; goto err; } - spin_lock_init(&sirfport->rx_lock); - spin_lock_init(&sirfport->tx_lock); tasklet_init(&sirfport->rx_dma_complete_tasklet, sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport); tasklet_init(&sirfport->rx_tmo_process_tasklet, diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 4280819e1888..69a62ebd3afc 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -424,8 +424,6 @@ struct sirfsoc_uart_port { struct dma_chan *tx_dma_chan; dma_addr_t tx_dma_addr; struct dma_async_tx_descriptor *tx_dma_desc; - spinlock_t rx_lock; - spinlock_t tx_lock; struct tasklet_struct rx_dma_complete_tasklet; struct tasklet_struct rx_tmo_process_tasklet; unsigned int rx_io_count; -- cgit v1.2.3 From ac62391496cf1ace051c4daebb00f7435320f11f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 6 May 2014 14:41:19 +0200 Subject: serial: SERIAL_FSL_LPUART should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `lpuart_dma_rx_free': fsl_lpuart.c:(.text+0x7da28): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `lpuart_dma_tx_free': fsl_lpuart.c:(.text+0x7da60): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `lpuart_dma_rx': fsl_lpuart.c:(.text+0x7dab8): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `lpuart_dma_tx': fsl_lpuart.c:(.text+0x7db7e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `lpuart_copy_rx_to_tty': fsl_lpuart.c:(.text+0x7dcd4): undefined reference to `dma_sync_single_for_cpu' make[3]: *** [vmlinux] Error 1 Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6ed61ec670f5..d88c058634ff 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1510,6 +1510,7 @@ config SERIAL_RP2_NR_UARTS config SERIAL_FSL_LPUART tristate "Freescale lpuart serial port support" + depends on HAS_DMA select SERIAL_CORE help Support for the on-chip lpuart on some Freescale SOCs. -- cgit v1.2.3 From d3352154041e28cf8c1c260cca41d8e83d5377d8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 6 May 2014 06:46:15 +0200 Subject: tty: serial: uartlite: Specify time for sending chars Xilinx MDM (Microblaze Debug Module) also contains uart interface via JTAG which is compatible with uartlite driver. This interface is really slow that's why timeout is setup to 1s. Make this time delay not to be cpu speed dependent. Signed-off-by: Michal Simek Acked-by: Peter Korsgaard Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/uartlite.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 5f90ef24d475..dce27f34937e 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -418,14 +418,23 @@ static struct uart_ops ulite_ops = { #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE static void ulite_console_wait_tx(struct uart_port *port) { - int i; u8 val; - - /* Spin waiting for TX fifo to have space available */ - for (i = 0; i < 100000; i++) { + unsigned long timeout; + + /* + * Spin waiting for TX fifo to have space available. + * When using the Microblaze Debug Module this can take up to 1s + */ + timeout = jiffies + msecs_to_jiffies(1000); + while (1) { val = uart_in32(ULITE_STATUS, port); if ((val & ULITE_STATUS_TXFULL) == 0) break; + if (time_after(jiffies, timeout)) { + dev_warn(port->dev, + "timeout waiting for TX buffer empty\n"); + break; + } cpu_relax(); } } -- cgit v1.2.3 From 1ffcd67dbcde910c2fd2d1c427c5f62f385fff12 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Tue, 13 May 2014 17:08:57 +0100 Subject: serial: st-asc: Fix data corruption during long console bursts On my test platform (B2020/STiH416) the serial port issues bad characters during the initial message avalanche as the console comes up. The problem also occurs when dense(ish) I/O is done using the polled I/O interface. The problem is fixed for me by using the FIFO half-empty bit rather than FIFO full bit. Note that using the half-empty bit causes the FIFO to be managed in a similar way to interrupt based I/O (i.e. where the hardware gets best test coverage). Running the FIFO half full will have no impact (good or bad) on console performance. The UART will still remain fully saturated and the busy-wait until the FIFO is empty in asc_console_write() will complete at the same time. Signed-off-by: Daniel Thompson Acked-by: Maxime Coquelin Acked-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/st-asc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index dd3a96e07026..c7f61ac27132 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -194,9 +194,9 @@ static inline u32 asc_txfifo_is_empty(struct uart_port *port) return asc_in(port, ASC_STA) & ASC_STA_TE; } -static inline int asc_txfifo_is_full(struct uart_port *port) +static inline u32 asc_txfifo_is_half_empty(struct uart_port *port) { - return asc_in(port, ASC_STA) & ASC_STA_TF; + return asc_in(port, ASC_STA) & ASC_STA_THE; } static inline const char *asc_port_name(struct uart_port *port) @@ -628,7 +628,7 @@ static int asc_get_poll_char(struct uart_port *port) static void asc_put_poll_char(struct uart_port *port, unsigned char c) { - while (asc_txfifo_is_full(port)) + while (!asc_txfifo_is_half_empty(port)) cpu_relax(); asc_out(port, ASC_TXBUF, c); } @@ -783,7 +783,7 @@ static void asc_console_putchar(struct uart_port *port, int ch) unsigned int timeout = 1000000; /* Wait for upto 1 second in case flow control is stopping us. */ - while (--timeout && asc_txfifo_is_full(port)) + while (--timeout && !asc_txfifo_is_half_empty(port)) udelay(1); asc_out(port, ASC_TXBUF, ch); -- cgit v1.2.3 From 10389e66231f1abdf27caa61b822b59dc2fd86b8 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Mon, 12 May 2014 10:34:59 +0200 Subject: tty: serial: men_z135_uart: Don't activate TX Space available IRQ on startup Don't activate the TX Space available IRQ on startup, or a simple $ cat /dev/ttyHSU0 will cause an endless amount of IRQs, as there is always space in the TX FIFO available if no data is going to be sent. Also correct comments for IRQ names (RX and TX swapped). Signed-off-by: Johannes Thumshirn Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/men_z135_uart.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index d08eb5d8330d..c9d18548783a 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -41,8 +41,8 @@ #define IS_IRQ(x) ((x) & 1) #define IRQ_ID(x) (((x) >> 1) & 7) -#define MEN_Z135_IER_RXCIEN BIT(0) /* TX Space IRQ */ -#define MEN_Z135_IER_TXCIEN BIT(1) /* RX Space IRQ */ +#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ +#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */ #define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */ #define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */ #define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \ @@ -576,7 +576,8 @@ static int men_z135_startup(struct uart_port *port) conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); - conf_reg |= MEN_Z135_ALL_IRQS; + /* Activate all but TX space available IRQ */ + conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN; conf_reg &= ~(0xff << 16); conf_reg |= (txlvl << 16); conf_reg |= (rxlvl << 20); -- cgit v1.2.3 From e4ac92df2791c1a3912643e9547941f430fda726 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 20 May 2014 14:05:50 -0700 Subject: serial: samsung: Neaten dbg uses Add format and argument checking and fix misuses in the dbg macro. Add __printf Use %pR for resource Add #include guard to samsung.h Move static functions from .h to .c Use vscnprintf instead of length unguarded vsprintf Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 35 +++++++++++++++++++++++++++++------ drivers/tty/serial/samsung.h | 23 +++-------------------- 2 files changed, 32 insertions(+), 26 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 1f5505e7f90d..329337711bb0 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -53,6 +53,29 @@ #include "samsung.h" +#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \ + defined(CONFIG_DEBUG_LL) && \ + !defined(MODULE) + +extern void printascii(const char *); + +__printf(1, 2) +static void dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vscnprintf(buff, sizeof(buf), fmt, va); + va_end(va); + + printascii(buff); +} + +#else +#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0) +#endif + /* UART name and device definitions */ #define S3C24XX_SERIAL_NAME "ttySAC" @@ -468,8 +491,8 @@ static int s3c24xx_serial_startup(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); int ret; - dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", - port->mapbase, port->membase); + dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n", + port, (unsigned long long)port->mapbase, port->membase); rx_enabled(port) = 1; @@ -514,8 +537,8 @@ static int s3c64xx_serial_startup(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); int ret; - dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n", - port->mapbase, port->membase); + dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n", + port, (unsigned long long)port->mapbase, port->membase); wr_regl(port, S3C64XX_UINTM, 0xf); @@ -1160,7 +1183,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, return -EINVAL; } - dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); + dbg("resource %pR)\n", res); port->membase = devm_ioremap(port->dev, res->start, resource_size(res)); if (!port->membase) { @@ -1203,7 +1226,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, wr_regl(port, S3C64XX_UINTSP, 0xf); } - dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", + dbg("port: map=%08x, mem=%p, irq=%d (%d,%d), clock=%u\n", port->mapbase, port->membase, port->irq, ourport->rx_irq, ourport->tx_irq, port->uartclk); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 8827e5424cef..eb071dd19b2d 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -1,3 +1,6 @@ +#ifndef __SAMSUNG_H +#define __SAMSUNG_H + /* * Driver for Samsung SoC onboard UARTs. * @@ -77,24 +80,4 @@ struct s3c24xx_uart_port { #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) -#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \ - defined(CONFIG_DEBUG_LL) && \ - !defined(MODULE) - -extern void printascii(const char *); - -static void dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -#else -#define dbg(x...) do { } while (0) #endif -- cgit v1.2.3 From c67f866dbb9b36593d0f6af177e99047ecebf95a Mon Sep 17 00:00:00 2001 From: Vincent Stehlé Date: Sun, 25 May 2014 23:13:05 +0200 Subject: serial: efm32: add module_exit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add missing specification of efm32_uart_exit as module_exit. This fixes the following compilation warning: drivers/tty/serial/efm32-uart.c:840:123: warning: ‘efm32_uart_exit’ defined but not used [-Wunused-function] Signed-off-by: Vincent Stehlé Cc: Jiri Slaby Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/efm32-uart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c index c167a710dc39..b373f6416e8c 100644 --- a/drivers/tty/serial/efm32-uart.c +++ b/drivers/tty/serial/efm32-uart.c @@ -842,6 +842,7 @@ static void __exit efm32_uart_exit(void) platform_driver_unregister(&efm32_uart_driver); uart_unregister_driver(&efm32_uart_reg); } +module_exit(efm32_uart_exit); MODULE_AUTHOR("Uwe Kleine-Koenig "); MODULE_DESCRIPTION("EFM32 UART/USART driver"); -- cgit v1.2.3 From feb5814254094c306429fe6d7b9c534fa0250f4c Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 24 May 2014 15:24:51 -0300 Subject: parport: Add support for the WCH353 1S/1P multi-IO card This Multi-IO card has one serial 16550-like and one parallel port connector. Here's the lspci output, after this commit is applied: 03:07.0 Serial controller: Device 4348:5053 (rev 10) (prog-if 02 [16550]) Subsystem: Device 4348:5053 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Cc: Alan Cox Cc: Greg Kroah-Hartman Signed-off-by: Ezequiel Garcia Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_serial.c | 9 +++++++++ drivers/tty/serial/8250/8250_pci.c | 10 ++++++++++ 2 files changed, 19 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index ff53314100f6..ee932004724f 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -62,6 +62,7 @@ enum parport_pc_pci_cards { timedia_9079a, timedia_9079b, timedia_9079c, + wch_ch353_1s1p, wch_ch353_2s1p, sunix_2s1p, }; @@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = { /* timedia_9079a */ { 1, { { 2, 3 }, } }, /* timedia_9079b */ { 1, { { 2, 3 }, } }, /* timedia_9079c */ { 1, { { 2, 3 }, } }, + /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } }, /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } }, /* sunix_2s1p */ { 1, { { 3, -1 }, } }, }; @@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = { { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c }, /* WCH CARDS */ + { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p}, { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p}, /* @@ -479,6 +482,12 @@ static struct pciserial_board pci_parport_serial_boards[] = { .base_baud = 921600, .uart_offset = 8, }, + [wch_ch353_1s1p] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, [wch_ch353_2s1p] = { .flags = FL_BASE0|FL_BASE_BARS, .num_ports = 2, diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index b14bcba96c25..f35a85f56627 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1778,6 +1778,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 +#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 #define PCI_VENDOR_ID_AGESTAR 0x5372 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 @@ -2410,6 +2411,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_omegapci_setup, }, + /* WCH CH353 1S1P card (16550 clone) */ + { + .vendor = PCI_VENDOR_ID_WCH, + .device = PCI_DEVICE_ID_WCH_CH353_1S1P, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch353_setup, + }, /* WCH CH353 2S1P card (16550 clone) */ { .vendor = PCI_VENDOR_ID_WCH, @@ -3526,6 +3535,7 @@ static const struct pci_device_id blacklist[] = { /* multi-io cards handled by parport_serial */ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ + { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ }; /* -- cgit v1.2.3 From b38cb7d2571197b56cefae8967f9db15c9361113 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 14 May 2014 15:55:03 -0300 Subject: serial: imx: Disable new features of autobaud detection Bit 7 of UCR3 is described in the i.MX reference manuals (with the exception of i.MX1) as follows: ADNIMP: Autobaud Detection Not Improved-. Disables new features of autobaud detection (See Baud Rate Automatic Detection Protocol, for more details). 0 Autobaud detection new features selected 1 Keep old autobaud detection mechanism The "new features" mechanism occasionally cause the receiver to get out of sync and continuously produce received characters of '\xff'. In order to reproduce the problem: $ stty -F /dev/ttymxc0 19200 - Change the terminal baudrate to 19200 - Type in the console and it should look good - Change the terminal baudrate back to 115200 - Type 'b' in the console, then a stream of garbage characters is seen. Also rename the bit definition as per the reference manual. Tested on mx6q, mx6dl, mx6solo and mx53. Based on a patch from Eric Nelson for U-boot. Signed-off-by: Fabio Estevam Tested-by: Eric Nelson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 3b6c1a2e25de..392154d13614 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -116,7 +116,7 @@ #define UCR3_DSR (1<<10) /* Data set ready */ #define UCR3_DCD (1<<9) /* Data carrier detect */ #define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ @@ -1174,7 +1174,7 @@ static int imx_startup(struct uart_port *port) if (!is_imx1_uart(sport)) { temp = readl(sport->port.membase + UCR3); - temp |= IMX21_UCR3_RXDMUXSEL; + temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP; writel(temp, sport->port.membase + UCR3); } -- cgit v1.2.3 From 0c6d774c4d1775aba7281183b424fa0a0b1a3cf0 Mon Sep 17 00:00:00 2001 From: Thomee Wright Date: Mon, 19 May 2014 20:30:51 +0000 Subject: serial: Add support for Advantech PCM-3614I/PCM-3618I serial expansion cards Add support for Advantech PCM-3614I/PCM-3618I serial expansion cards Advantech makes a variety of serial port expansion cards, including the PCM-3614 and PCM-3618 (http://www.advantech.com/products/1-2JKLU5/PCM-3618/mod_5DF8DE5A-6B49-4429-BB2F-CB35FE1D168D.aspx). They have a driver available which was forked from the kernel driver ages ago and has not been maintained in quite some time, available at http://support.advantech.com.tw/Support/DownloadSRDetail_New.aspx?SR_ID=1-1W8FZ5&Doc_Source=Download Their driver added several features to aid in communications at higher baud rates, but at normal serial port speeds, the standard 8250_pci driver functions just fine. This patch adds the necessary PCI IDs to recognize this card. See bug 75681 (https://bugzilla.kernel.org/show_bug.cgi?id=75681) Signed-off-by: Thomee Wright Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index f35a85f56627..33137b3ba94d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1753,6 +1753,8 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_VENDOR_ID_ADVANTECH 0x13fe #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 +#define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 #define PCI_DEVICE_ID_TITAN_200I 0x8028 #define PCI_DEVICE_ID_TITAN_400I 0x8048 #define PCI_DEVICE_ID_TITAN_800I 0x8088 @@ -3890,6 +3892,13 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, pbn_b2_8_921600 }, + /* Advantech also use 0x3618 and 0xf618 */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, + PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, -- cgit v1.2.3 From 772f89910a8a1d1dd9dade2eec3125f283a9db63 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 21 May 2014 08:56:28 +0800 Subject: serial: imx: reset the uart port all the time Current code resets the uart port only when it supports the irda mode. In actually, we also need to reset the uart port in the non-irda mode. A hang was caught in the following case: UART A transmits data to the other end. But the transmission maybe terminated. In some corner case, the TX FIFO maybe not empty. The kernel will hang at the imx_set_termios(): ............................................................ while (!(readl(sport->port.membase + USR2) & USR2_TXDC)) barrier(); ............................................................ This patch resets the uart port all the time in the imx_startup(). And fix the hang. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 392154d13614..060ae9753923 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1070,7 +1070,7 @@ static void imx_disable_dma(struct imx_port *sport) static int imx_startup(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; - int retval; + int retval, i; unsigned long flags, temp; retval = clk_prepare_enable(sport->clk_per); @@ -1098,17 +1098,15 @@ static int imx_startup(struct uart_port *port) writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); - if (USE_IRDA(sport)) { - /* reset fifo's and state machines */ - int i = 100; - temp = readl(sport->port.membase + UCR2); - temp &= ~UCR2_SRST; - writel(temp, sport->port.membase + UCR2); - while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && - (--i > 0)) { - udelay(1); - } - } + /* Reset fifo's and state machines */ + i = 100; + + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) + udelay(1); /* * Allocate the IRQ(s) i.MX1 has three interrupts whereas later -- cgit v1.2.3 From 8eccd0cd2106fbe0acc6bec3701e69e171353f25 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 21 May 2014 09:09:47 +0800 Subject: serial: imx: remove the redundant code In the imx_startup(), we will reset the uart port which will reset all the FIFOs, including the URXD. So the code to clear the RX FIFO is redundant. Just remove it. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 060ae9753923..d373fe83da52 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1161,15 +1161,6 @@ static int imx_startup(struct uart_port *port) temp |= UCR2_IRTS; writel(temp, sport->port.membase + UCR2); - if (USE_IRDA(sport)) { - /* clear RX-FIFO */ - int i = 64; - while ((--i > 0) && - (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { - barrier(); - } - } - if (!is_imx1_uart(sport)) { temp = readl(sport->port.membase + UCR3); temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP; -- cgit v1.2.3 From e2f2786606d49d3aae545c61c04757a64cf7e5f0 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 23 May 2014 12:40:40 +0800 Subject: serial: imx: remove the DMA wait queue The DMA wait queue makes the code very complicated: For RX, the @->stop_rx hook does not really stop the RX; For TX, the @->stop_tx hook does not really stop the TX. The above make the imx_shutdown has to wait the RX/TX DMA to be finished. In order to make code more simple, this patch removes the DMA wait queue. By calling the dmaengine_terminate_all, this patch makes the RX stops immediately after we call the @->stop_rx hook, so does the TX. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d373fe83da52..cdaeeeee6cec 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -225,7 +225,6 @@ struct imx_port { void *rx_buf; unsigned int tx_bytes; unsigned int dma_tx_nents; - wait_queue_head_t dma_wait; }; struct imx_port_ucrs { @@ -416,12 +415,10 @@ static void imx_stop_tx(struct uart_port *port) return; } - /* - * We are maybe in the SMP context, so if the DMA TX thread is running - * on other cpu, we have to wait for it to finish. - */ - if (sport->dma_is_enabled && sport->dma_is_txing) - return; + if (sport->dma_is_enabled && sport->dma_is_txing) { + dmaengine_terminate_all(sport->dma_chan_tx); + sport->dma_is_txing = 0; + } temp = readl(sport->port.membase + UCR1); writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); @@ -435,12 +432,10 @@ static void imx_stop_rx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - /* - * We are maybe in the SMP context, so if the DMA TX thread is running - * on other cpu, we have to wait for it to finish. - */ - if (sport->dma_is_enabled && sport->dma_is_rxing) - return; + if (sport->dma_is_enabled && sport->dma_is_rxing) { + dmaengine_terminate_all(sport->dma_chan_rx); + sport->dma_is_rxing = 0; + } temp = readl(sport->port.membase + UCR2); writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); @@ -497,12 +492,6 @@ static void dma_tx_callback(void *data) dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); uart_write_wakeup(&sport->port); - - if (waitqueue_active(&sport->dma_wait)) { - wake_up(&sport->dma_wait); - dev_dbg(sport->port.dev, "exit in %s.\n", __func__); - return; - } } static void imx_dma_tx(struct imx_port *sport) @@ -875,10 +864,6 @@ static void imx_rx_dma_done(struct imx_port *sport) writel(temp, sport->port.membase + UCR1); sport->dma_is_rxing = 0; - - /* Is the shutdown waiting for us? */ - if (waitqueue_active(&sport->dma_wait)) - wake_up(&sport->dma_wait); } /* @@ -1025,8 +1010,6 @@ static void imx_enable_dma(struct imx_port *sport) { unsigned long temp; - init_waitqueue_head(&sport->dma_wait); - /* set UCR1 */ temp = readl(sport->port.membase + UCR1); temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN | @@ -1218,10 +1201,13 @@ static void imx_shutdown(struct uart_port *port) unsigned long flags; if (sport->dma_is_enabled) { - /* We have to wait for the DMA to finish. */ - wait_event(sport->dma_wait, - !sport->dma_is_rxing && !sport->dma_is_txing); + /* + * The upper layer may does not call the @->stop_tx and + * @->stop_rx, so we call them ourselves. + */ + imx_stop_tx(port); imx_stop_rx(port); + imx_disable_dma(sport); imx_uart_dma_exit(sport); } -- cgit v1.2.3 From 85878399e7bf14bc36d191d3a0de54b2a40f29e7 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 23 May 2014 12:32:54 +0800 Subject: serial: imx: disable the receiver ready interrupt for imx_stop_rx This patch disables the receiver ready interrupt for imx_stop_rx. It reduces the interrupt numbers when the uart is going to close or suspend. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index cdaeeeee6cec..3b706add81a9 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -439,6 +439,10 @@ static void imx_stop_rx(struct uart_port *port) temp = readl(sport->port.membase + UCR2); writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); + + /* disable the `Receiver Ready Interrrupt` */ + temp = readl(sport->port.membase + UCR1); + writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1); } /* -- cgit v1.2.3 From bee18bdc9c0f383428cbf8c955b7bb8e6cc0d090 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 24 May 2014 12:50:26 +0400 Subject: serial: sccnxp: Remove useless timer_pending() check sccnxp_timer() is triggered only by timer, so there are no need to check for timer_pending(). Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index a447f71538ef..3f5d40a060e0 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -474,9 +474,7 @@ static void sccnxp_timer(unsigned long data) sccnxp_handle_events(s); spin_unlock_irqrestore(&s->lock, flags); - if (!timer_pending(&s->timer)) - mod_timer(&s->timer, jiffies + - usecs_to_jiffies(s->pdata.poll_time_us)); + mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us)); } static irqreturn_t sccnxp_ist(int irq, void *dev_id) -- cgit v1.2.3 From 2ce7c148c8ddef52f18896cd11459d0de8a25c3f Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 24 May 2014 12:50:27 +0400 Subject: serial: sccnxp: Add IGNPAR flag handling This patch add IGNPAR flag handling for the driver. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 3f5d40a060e0..5443b46345ed 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -672,6 +672,8 @@ static void sccnxp_set_termios(struct uart_port *port, port->ignore_status_mask = 0; if (termios->c_iflag & IGNBRK) port->ignore_status_mask |= SR_BRK; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; if (!(termios->c_cflag & CREAD)) port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK; -- cgit v1.2.3 From 84130aace83989c1dba073ed98dad721d2060258 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 13 May 2014 20:20:43 +0200 Subject: tty/serial: Add GPIOLIB helpers for controlling modem lines This patch add some helpers to control modem lines (CTS/RTS/DSR...) via GPIO. This will be useful for many boards which have a serial controller that only handle CTS/RTS pins (or even just RX/TX). Signed-off-by: Richard Genoud Acked-by: Greg Kroah-Hartman Tested-by: Yegor Yefremov Signed-off-by: Greg Kroah-Hartman --- Documentation/serial/driver | 25 ++++++ drivers/tty/serial/Kconfig | 3 + drivers/tty/serial/Makefile | 3 + drivers/tty/serial/serial_mctrl_gpio.c | 143 +++++++++++++++++++++++++++++++++ drivers/tty/serial/serial_mctrl_gpio.h | 110 +++++++++++++++++++++++++ 5 files changed, 284 insertions(+) create mode 100644 drivers/tty/serial/serial_mctrl_gpio.c create mode 100644 drivers/tty/serial/serial_mctrl_gpio.h (limited to 'drivers/tty') diff --git a/Documentation/serial/driver b/Documentation/serial/driver index c3a7689a90e6..3bba1aeb799c 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -429,3 +429,28 @@ thus: struct uart_port port; int my_stuff; }; + +Modem control lines via GPIO +---------------------------- + +Some helpers are provided in order to set/get modem control lines via GPIO. + +mctrl_gpio_init(dev, idx): + This will get the {cts,rts,...}-gpios from device tree if they are + present and request them, set direction etc, and return an + allocated structure. devm_* functions are used, so there's no need + to call mctrl_gpio_free(). + +mctrl_gpio_free(dev, gpios): + This will free the requested gpios in mctrl_gpio_init(). + As devm_* function are used, there's generally no need to call + this function. + +mctrl_gpio_to_gpiod(gpios, gidx) + This returns the gpio structure associated to the modem line index. + +mctrl_gpio_set(gpios, mctrl): + This will sets the gpios according to the mctrl state. + +mctrl_gpio_get(gpios, mctrl): + This will update mctrl with the gpios values. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index d88c058634ff..4bf6d220357b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1553,4 +1553,7 @@ config SERIAL_MEN_Z135 endmenu +config SERIAL_MCTRL_GPIO + tristate + endif # TTY diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 712732b43917..0080cc362e09 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -92,3 +92,6 @@ obj-$(CONFIG_SERIAL_ARC) += arc_uart.o obj-$(CONFIG_SERIAL_RP2) += rp2.o obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o + +# GPIOLIB helpers for modem control lines +obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c new file mode 100644 index 000000000000..bf9560ffe3f4 --- /dev/null +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -0,0 +1,143 @@ +/* + * Helpers for controlling modem lines via GPIO + * + * Copyright (C) 2014 Paratronic S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include "serial_mctrl_gpio.h" + +struct mctrl_gpios { + struct gpio_desc *gpio[UART_GPIO_MAX]; +}; + +static const struct { + const char *name; + unsigned int mctrl; + bool dir_out; +} mctrl_gpios_desc[UART_GPIO_MAX] = { + { "cts", TIOCM_CTS, false, }, + { "dsr", TIOCM_DSR, false, }, + { "dcd", TIOCM_CD, false, }, + { "rng", TIOCM_RNG, false, }, + { "rts", TIOCM_RTS, true, }, + { "dtr", TIOCM_DTR, true, }, + { "out1", TIOCM_OUT1, true, }, + { "out2", TIOCM_OUT2, true, }, +}; + +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) +{ + enum mctrl_gpio_idx i; + + if (IS_ERR_OR_NULL(gpios)) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (!IS_ERR_OR_NULL(gpios->gpio[i]) && + mctrl_gpios_desc[i].dir_out) + gpiod_set_value(gpios->gpio[i], + !!(mctrl & mctrl_gpios_desc[i].mctrl)); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_set); + +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx) +{ + if (!IS_ERR_OR_NULL(gpios) && !IS_ERR_OR_NULL(gpios->gpio[gidx])) + return gpios->gpio[gidx]; + else + return NULL; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); + +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + enum mctrl_gpio_idx i; + + /* + * return it unchanged if the structure is not allocated + */ + if (IS_ERR_OR_NULL(gpios)) + return *mctrl; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (!IS_ERR_OR_NULL(gpios->gpio[i]) && + !mctrl_gpios_desc[i].dir_out) { + if (gpiod_get_value(gpios->gpio[i])) + *mctrl |= mctrl_gpios_desc[i].mctrl; + else + *mctrl &= ~mctrl_gpios_desc[i].mctrl; + } + } + + return *mctrl; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_get); + +struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + int err; + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < UART_GPIO_MAX; i++) { + gpios->gpio[i] = devm_gpiod_get_index(dev, + mctrl_gpios_desc[i].name, + idx); + + /* + * The GPIOs are maybe not all filled, + * this is not an error. + */ + if (IS_ERR_OR_NULL(gpios->gpio[i])) + continue; + + if (mctrl_gpios_desc[i].dir_out) + err = gpiod_direction_output(gpios->gpio[i], 0); + else + err = gpiod_direction_input(gpios->gpio[i]); + if (err) { + dev_dbg(dev, "Unable to set direction for %s GPIO", + mctrl_gpios_desc[i].name); + devm_gpiod_put(dev, gpios->gpio[i]); + gpios->gpio[i] = NULL; + } + } + + return gpios; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_init); + +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (IS_ERR_OR_NULL(gpios)) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (!IS_ERR_OR_NULL(gpios->gpio[i])) + devm_gpiod_put(dev, gpios->gpio[i]); + devm_kfree(dev, gpios); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_free); diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h new file mode 100644 index 000000000000..400ba0494a17 --- /dev/null +++ b/drivers/tty/serial/serial_mctrl_gpio.h @@ -0,0 +1,110 @@ +/* + * Helpers for controlling modem lines via GPIO + * + * Copyright (C) 2014 Paratronic S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SERIAL_MCTRL_GPIO__ +#define __SERIAL_MCTRL_GPIO__ + +#include +#include +#include + +enum mctrl_gpio_idx { + UART_GPIO_CTS, + UART_GPIO_DSR, + UART_GPIO_DCD, + UART_GPIO_RNG, + UART_GPIO_RI = UART_GPIO_RNG, + UART_GPIO_RTS, + UART_GPIO_DTR, + UART_GPIO_OUT1, + UART_GPIO_OUT2, + UART_GPIO_MAX, +}; + +/* + * Opaque descriptor for modem lines controlled by GPIOs + */ +struct mctrl_gpios; + +#ifdef CONFIG_GPIOLIB + +/* + * Set state of the modem control output lines via GPIOs. + */ +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl); + +/* + * Get state of the modem control output lines from GPIOs. + * The mctrl flags are updated and returned. + */ +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl); + +/* + * Returns the associated struct gpio_desc to the modem line gidx + */ +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx); + +/* + * Request and set direction of modem control lines GPIOs. + * devm_* functions are used, so there's no need to call mctrl_gpio_free(). + * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on + * allocation error. + */ +struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx); + +/* + * Free the mctrl_gpios structure. + * Normally, this function will not be called, as the GPIOs will + * be disposed of by the resource management code. + */ +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios); + +#else /* GPIOLIB */ + +static inline +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) +{ +} + +static inline +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + return *mctrl; +} + +static inline +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx) +{ + return ERR_PTR(-ENOSYS); +} + +static inline +struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx) +{ + return ERR_PTR(-ENOSYS); +} + +static inline +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) +{ +} + +#endif /* GPIOLIB */ + +#endif -- cgit v1.2.3 From e0b0baadb7a4509bdcd5ba37d0be61e2c4bb0d48 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 13 May 2014 20:20:44 +0200 Subject: tty/serial: at91: use mctrl_gpio helpers On sam9x5, dedicated CTS (and RTS) pins are unusable together with the LCDC, the EMAC, or the MMC because they share the same line. Moreover, the USART controller doesn't handle DTR/DSR/DCD/RI signals, so we have to control them via GPIO. This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by: Richard Genoud Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/atmel-usart.txt | 10 +- arch/arm/mach-at91/at91rm9200_devices.c | 16 ++-- arch/arm/mach-at91/at91sam9260_devices.c | 7 -- arch/arm/mach-at91/at91sam9261_devices.c | 4 - arch/arm/mach-at91/at91sam9263_devices.c | 4 - arch/arm/mach-at91/at91sam9g45_devices.c | 5 - arch/arm/mach-at91/at91sam9rl_devices.c | 5 - drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/atmel_serial.c | 105 ++++++++++++++------- include/linux/platform_data/atmel.h | 1 - 10 files changed, 89 insertions(+), 69 deletions(-) (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 2f7aad71b3c9..a6391e70a8fd 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -13,8 +13,9 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data -- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral - function pin for the USART RTS feature. If unsure, don't specify this property. +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. + It will use specified PIO instead of the peripheral function pin for the USART feature. + If unsure, don't specify this property. - add dma bindings for dma transfer: - dmas: DMA specifier, consisting of a phandle to DMA controller node, memory peripheral interface and USART DMA channel ID, FIFO configuration. @@ -36,6 +37,11 @@ Example: atmel,use-dma-rx; atmel,use-dma-tx; rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; }; - use DMA: diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..291a90a5b1d4 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -923,7 +924,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -962,7 +962,14 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, +}; + +static struct gpiod_lookup_table uart0_gpios_table = { + .dev_id = "atmel_usart", + .table = { + GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW), + { }, + }, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -993,7 +1000,7 @@ static inline void configure_usart0_pins(unsigned pins) * We need to drive the pin manually. The serial driver will driver * this to high when initializing. */ - uart0_data.rts_gpio = AT91_PIN_PA21; + gpiod_add_lookup_table(&uart0_gpios_table); } } @@ -1013,7 +1020,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1065,7 +1071,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1109,7 +1114,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a0282928e9c1..526453ecdaff 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -820,7 +820,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -859,7 +858,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -911,7 +909,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -955,7 +952,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -999,7 +995,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1043,7 +1038,6 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1082,7 +1076,6 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..b5f7a7226ff8 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -881,7 +881,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -920,7 +919,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -964,7 +962,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1008,7 +1005,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..39803c3296b2 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1325,7 +1325,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1364,7 +1363,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1408,7 +1406,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1452,7 +1449,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index dab362c06487..4dfedd3f2e15 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1588,7 +1588,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1627,7 +1626,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1671,7 +1669,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1715,7 +1712,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1759,7 +1755,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..f75985062913 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -957,7 +957,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -996,7 +995,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1048,7 +1046,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1092,7 +1089,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1136,7 +1132,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4bf6d220357b..fb57159bad3a 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -117,6 +117,7 @@ config SERIAL_ATMEL bool "AT91 / AT32 on-chip serial port support" depends on ARCH_AT91 || AVR32 select SERIAL_CORE + select SERIAL_MCTRL_GPIO help This enables the driver for the on-chip UARTs of the Atmel AT91 and AT32 processors. diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 53eeea13ff16..43ca659c1d4b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include #include @@ -57,6 +59,8 @@ #include +#include "serial_mctrl_gpio.h" + static void atmel_start_rx(struct uart_port *port); static void atmel_stop_rx(struct uart_port *port); @@ -162,7 +166,7 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct serial_rs485 rs485; /* rs485 settings */ - int rts_gpio; /* optional RTS GPIO */ + struct mctrl_gpios *gpios; unsigned int tx_done_mask; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ @@ -237,6 +241,50 @@ static bool atmel_use_dma_rx(struct uart_port *port) return atmel_port->use_dma_rx; } +static unsigned int atmel_get_lines_status(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, ret = 0; + + status = UART_GET_CSR(port); + + mctrl_gpio_get(atmel_port->gpios, &ret); + + if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios, + UART_GPIO_CTS))) { + if (ret & TIOCM_CTS) + status &= ~ATMEL_US_CTS; + else + status |= ATMEL_US_CTS; + } + + if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios, + UART_GPIO_DSR))) { + if (ret & TIOCM_DSR) + status &= ~ATMEL_US_DSR; + else + status |= ATMEL_US_DSR; + } + + if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios, + UART_GPIO_RI))) { + if (ret & TIOCM_RI) + status &= ~ATMEL_US_RI; + else + status |= ATMEL_US_RI; + } + + if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios, + UART_GPIO_DCD))) { + if (ret & TIOCM_CD) + status &= ~ATMEL_US_DCD; + else + status |= ATMEL_US_DCD; + } + + return status; +} + /* Enable or disable the rs485 support */ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) { @@ -296,17 +344,6 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int mode; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin as a GPIO. - */ - if (gpio_is_valid(atmel_port->rts_gpio)) { - if (mctrl & TIOCM_RTS) - gpio_set_value(atmel_port->rts_gpio, 0); - else - gpio_set_value(atmel_port->rts_gpio, 1); - } - if (mctrl & TIOCM_RTS) control |= ATMEL_US_RTSEN; else @@ -319,6 +356,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) UART_PUT_CR(port, control); + mctrl_gpio_set(atmel_port->gpios, mctrl); + /* Local loopback mode? */ mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; if (mctrl & TIOCM_LOOP) @@ -346,7 +385,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) */ static u_int atmel_get_mctrl(struct uart_port *port) { - unsigned int status, ret = 0; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int ret = 0, status; status = UART_GET_CSR(port); @@ -362,7 +402,7 @@ static u_int atmel_get_mctrl(struct uart_port *port) if (!(status & ATMEL_US_RI)) ret |= TIOCM_RI; - return ret; + return mctrl_gpio_get(atmel_port->gpios, &ret); } /* @@ -1042,7 +1082,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) unsigned int status, pending, pass_counter = 0; do { - status = UART_GET_CSR(port); + status = atmel_get_lines_status(port); pending = status & UART_GET_IMR(port); if (!pending) break; @@ -1568,7 +1608,7 @@ static int atmel_startup(struct uart_port *port) } /* Save current CSR for comparison in atmel_tasklet_func() */ - atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status_prev = atmel_get_lines_status(port); atmel_port->irq_status = atmel_port->irq_status_prev; /* @@ -2324,6 +2364,15 @@ static int atmel_serial_resume(struct platform_device *pdev) #define atmel_serial_resume NULL #endif +static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev) +{ + p->gpios = mctrl_gpio_init(dev, 0); + if (IS_ERR_OR_NULL(p->gpios)) + return -1; + + return 0; +} + static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; @@ -2359,25 +2408,11 @@ static int atmel_serial_probe(struct platform_device *pdev) port = &atmel_ports[ret]; port->backup_imr = 0; port->uart.line = ret; - port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */ - if (pdata) - port->rts_gpio = pdata->rts_gpio; - else if (np) - port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0); - - if (gpio_is_valid(port->rts_gpio)) { - ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS"); - if (ret) { - dev_err(&pdev->dev, "error requesting RTS GPIO\n"); - goto err; - } - /* Default to 1 as RTS is active low */ - ret = gpio_direction_output(port->rts_gpio, 1); - if (ret) { - dev_err(&pdev->dev, "error setting up RTS GPIO\n"); - goto err; - } - } + + ret = atmel_init_gpios(port, &pdev->dev); + if (ret < 0) + dev_err(&pdev->dev, "%s", + "Failed to initialize GPIOs. The serial port may not work as expected"); ret = atmel_init_port(port, pdev); if (ret) diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index e26b0c14edea..cea9f70133c5 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -84,7 +84,6 @@ struct atmel_uart_data { short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ struct serial_rs485 rs485; /* rs485 settings */ - int rts_gpio; /* optional RTS GPIO */ }; /* Touchscreen Controller */ -- cgit v1.2.3 From ab5e4e4108ca5d8326cb6b4b3a21b096a002f68f Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 13 May 2014 20:20:45 +0200 Subject: tty/serial: at91: add interrupts for modem control lines Handle CTS/DSR/RI/DCD GPIO interrupts in atmel_serial. Signed-off-by: Richard Genoud Acked-by: Greg Kroah-Hartman Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 125 +++++++++++++++++++++++++++++++++++++- 1 file changed, 122 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 43ca659c1d4b..3fceae099c44 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -167,7 +168,9 @@ struct atmel_uart_port { struct serial_rs485 rs485; /* rs485 settings */ struct mctrl_gpios *gpios; + int gpio_irq[UART_GPIO_MAX]; unsigned int tx_done_mask; + bool ms_irq_enabled; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ int (*prepare_rx)(struct uart_port *port); @@ -489,8 +492,38 @@ static void atmel_stop_rx(struct uart_port *port) */ static void atmel_enable_ms(struct uart_port *port) { - UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC - | ATMEL_US_DCDIC | ATMEL_US_CTSIC); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + uint32_t ier = 0; + + /* + * Interrupt should not be enabled twice + */ + if (atmel_port->ms_irq_enabled) + return; + + atmel_port->ms_irq_enabled = true; + + if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0) + enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]); + else + ier |= ATMEL_US_CTSIC; + + if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0) + enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]); + else + ier |= ATMEL_US_DSRIC; + + if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0) + enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]); + else + ier |= ATMEL_US_RIIC; + + if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0) + enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]); + else + ier |= ATMEL_US_DCDIC; + + UART_PUT_IER(port, ier); } /* @@ -1079,11 +1112,31 @@ atmel_handle_status(struct uart_port *port, unsigned int pending, static irqreturn_t atmel_interrupt(int irq, void *dev_id) { struct uart_port *port = dev_id; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int status, pending, pass_counter = 0; + bool gpio_handled = false; do { status = atmel_get_lines_status(port); pending = status & UART_GET_IMR(port); + if (!gpio_handled) { + /* + * Dealing with GPIO interrupt + */ + if (irq == atmel_port->gpio_irq[UART_GPIO_CTS]) + pending |= ATMEL_US_CTSIC; + + if (irq == atmel_port->gpio_irq[UART_GPIO_DSR]) + pending |= ATMEL_US_DSRIC; + + if (irq == atmel_port->gpio_irq[UART_GPIO_RI]) + pending |= ATMEL_US_RIIC; + + if (irq == atmel_port->gpio_irq[UART_GPIO_DCD]) + pending |= ATMEL_US_DCDIC; + + gpio_handled = true; + } if (!pending) break; @@ -1563,6 +1616,45 @@ static void atmel_get_ip_name(struct uart_port *port) } } +static void atmel_free_gpio_irq(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + enum mctrl_gpio_idx i; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (atmel_port->gpio_irq[i] >= 0) + free_irq(atmel_port->gpio_irq[i], port); +} + +static int atmel_request_gpio_irq(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int *irq = atmel_port->gpio_irq; + enum mctrl_gpio_idx i; + int err = 0; + + for (i = 0; (i < UART_GPIO_MAX) && !err; i++) { + if (irq[i] < 0) + continue; + + irq_set_status_flags(irq[i], IRQ_NOAUTOEN); + err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH, + "atmel_serial", port); + if (err) + dev_err(port->dev, "atmel_startup - Can't get %d irq\n", + irq[i]); + } + + /* + * If something went wrong, rollback. + */ + while (err && (--i >= 0)) + if (irq[i] >= 0) + free_irq(irq[i], port); + + return err; +} + /* * Perform initialization and enable port for reception */ @@ -1579,6 +1671,7 @@ static int atmel_startup(struct uart_port *port) * handle an unexpected interrupt */ UART_PUT_IDR(port, -1); + atmel_port->ms_irq_enabled = false; /* * Allocate the IRQ @@ -1590,6 +1683,13 @@ static int atmel_startup(struct uart_port *port) return retval; } + /* + * Get the GPIO lines IRQ + */ + retval = atmel_request_gpio_irq(port); + if (retval) + goto free_irq; + /* * Initialize DMA (if necessary) */ @@ -1654,6 +1754,11 @@ static int atmel_startup(struct uart_port *port) } return 0; + +free_irq: + free_irq(port->irq, port); + + return retval; } /* @@ -1701,9 +1806,12 @@ static void atmel_shutdown(struct uart_port *port) atmel_port->rx_ring.tail = 0; /* - * Free the interrupt + * Free the interrupts */ free_irq(port->irq, port); + atmel_free_gpio_irq(port); + + atmel_port->ms_irq_enabled = false; } /* @@ -2366,10 +2474,21 @@ static int atmel_serial_resume(struct platform_device *pdev) static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev) { + enum mctrl_gpio_idx i; + struct gpio_desc *gpiod; + p->gpios = mctrl_gpio_init(dev, 0); if (IS_ERR_OR_NULL(p->gpios)) return -1; + for (i = 0; i < UART_GPIO_MAX; i++) { + gpiod = mctrl_gpio_to_gpiod(p->gpios, i); + if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN)) + p->gpio_irq[i] = gpiod_to_irq(gpiod); + else + p->gpio_irq[i] = -EINVAL; + } + return 0; } -- cgit v1.2.3 From 06aa82e498c144c7784a6f3d3b55458b272d6146 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Thu, 1 May 2014 15:04:53 -0400 Subject: serial: uart: add hw flow control support configuration 8250 uart driver currently supports only software assisted hw flow control. The software assisted hw flow control maintains a hw_stopped flag in the tty structure to stop and start transmission and use modem status interrupt for the event to drive the handshake signals. This is not needed if hw has flow control capabilities. This patch adds a DT attribute for enabling hw flow control for a uart port. Also skip stop and start if this flag is present in flag field of the port structure. Signed-off-by: Murali Karicheri CC: Rob Herring CC: Pawel Moll CC: Mark Rutland CC: Ian Campbell CC: Kumar Gala CC: Randy Dunlap CC: Jiri Slaby CC: Santosh Shilimkar Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/of-serial.txt | 1 + drivers/tty/serial/8250/8250_core.c | 6 ++++-- drivers/tty/serial/of_serial.c | 4 ++++ drivers/tty/serial/serial_core.c | 12 +++++++++--- 4 files changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt index 1928a3e83cd0..77054772a8f4 100644 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/serial/of-serial.txt @@ -37,6 +37,7 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. +- has-hw-flow-control: the hardware has flow control capability. Example: diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 111ee8acb07e..65556fc57d56 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2333,9 +2333,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * the trigger, or the MCR RTS bit is cleared. In the case where * the remote UART is not using CTS auto flow control, we must * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. + * UART to respond. IOW, at least 32 bytes of FIFO. Also enable + * AFE if hw flow control is supported */ - if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { + if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) || + (port->flags & UPF_HARD_FLOW)) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 99246606a256..77ec6a147522 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -182,6 +182,10 @@ static int of_platform_serial_probe(struct platform_device *ofdev) "auto-flow-control")) port8250.capabilities |= UART_CAP_AFE; + if (of_property_read_bool(ofdev->dev.of_node, + "has-hw-flow-control")) + port8250.port.flags |= UPF_HARD_FLOW; + ret = serial8250_register_8250_port(&port8250); break; } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 9a01ee4dda6d..fbf6c5ad222f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -174,8 +174,12 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, if (tty->termios.c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } - - if (tty_port_cts_enabled(port)) { + /* + * if hw support flow control without software intervention, + * then skip the below check + */ + if (tty_port_cts_enabled(port) && + !(uport->flags & UPF_HARD_FLOW)) { spin_lock_irq(&uport->lock); if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) tty->hw_stopped = 1; @@ -2775,7 +2779,9 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status) uport->icount.cts++; - if (tty_port_cts_enabled(port)) { + /* skip below code if the hw flow control is supported */ + if (tty_port_cts_enabled(port) && + !(uport->flags & UPF_HARD_FLOW)) { if (tty->hw_stopped) { if (status) { tty->hw_stopped = 0; -- cgit v1.2.3 From d4089a332883ad969700aac5dd4dd5f1c4fee825 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 28 Apr 2014 15:59:56 +0300 Subject: serial: 8250_dma: check the result of TX buffer mapping Using dma_mapping_error() to make sure the mapping did not fail. Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dma.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index ab9096dc3849..148ffe4c232f 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -192,21 +192,28 @@ int serial8250_request_dma(struct uart_8250_port *p) dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size, &dma->rx_addr, GFP_KERNEL); - if (!dma->rx_buf) { - dma_release_channel(dma->rxchan); - dma_release_channel(dma->txchan); - return -ENOMEM; - } + if (!dma->rx_buf) + goto err; /* TX buffer */ dma->tx_addr = dma_map_single(dma->txchan->device->dev, p->port.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) { + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, + dma->rx_buf, dma->rx_addr); + goto err; + } dev_dbg_ratelimited(p->port.dev, "got both dma channels\n"); return 0; +err: + dma_release_channel(dma->rxchan); + dma_release_channel(dma->txchan); + + return -ENOMEM; } EXPORT_SYMBOL_GPL(serial8250_request_dma); -- cgit v1.2.3 From 7fa21dd8bd191564a195291161d6b43db5d9c350 Mon Sep 17 00:00:00 2001 From: Stephen Chivers Date: Wed, 14 May 2014 08:04:39 +1000 Subject: printk/of_serial: fix serial console cessation part way through boot. Commit 5f5c9ae56c38942623f69c3e6dc6ec78e4da2076 "serial_core: Unregister console in uart_remove_one_port()" fixed a crash where a serial port was removed but not deregistered as a console. There is a side effect of that commit for platforms having serial consoles and of_serial configured (CONFIG_SERIAL_OF_PLATFORM). The serial console is disabled midway through the boot process. This cessation of the serial console affects PowerPC computers such as the MVME5100 and SAM440EP. The sequence is: bootconsole [udbg0] enabled .... serial8250/16550 driver initialises and registers its UARTS, one of these is the serial console. console [ttyS0] enabled .... of_serial probes "platform" devices, registering them as it goes. One of these is the serial console. console [ttyS0] disabled. The disabling of the serial console is due to: a. unregister_console in printk not clearing the CONS_ENABLED bit in the console flags, even though it has announced that the console is disabled; and b. of_platform_serial_probe in of_serial not setting the port type before it registers with serial8250_register_8250_port. This patch ensures that the serial console is re-enabled when of_serial registers a serial port that corresponds to the designated console. Signed-off-by: Stephen Chivers Tested-by: Stephen Chivers Acked-by: Geert Uytterhoeven [unregister_console] Cc: stable # 3.15 === The above failure was identified in Linux-3.15-rc2. Tested using MVME5100 and SAM440EP PowerPC computers with kernels built from Linux-3.15-rc5 and tty-next. The continued operation of the serial console is vital for computers such as the MVME5100 as that Single Board Computer does not have any grapical/display hardware. Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/of_serial.c | 1 + kernel/printk/printk.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 77ec6a147522..68d4455f3cf9 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -173,6 +173,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) { struct uart_8250_port port8250; memset(&port8250, 0, sizeof(port8250)); + port.type = port_type; port8250.port = port; if (port.fifosize) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index a45b50962295..81c71617ea28 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2413,6 +2413,7 @@ int unregister_console(struct console *console) if (console_drivers != NULL && console->flags & CON_CONSDEV) console_drivers->flags |= CON_CONSDEV; + console->flags &= ~CON_ENABLED; console_unlock(); console_sysfs_notify(); return res; -- cgit v1.2.3 From cec5b2a97a11ade56a701e83044d0a2a984c67b4 Mon Sep 17 00:00:00 2001 From: Adam Borowski Date: Fri, 23 May 2014 01:33:08 +0200 Subject: vt: emulate 8- and 24-bit colour codes. Most other mainstream terminals support "xterm256" colours, which means people sometimes use these blindly without checking capabilities. Because of hardware limitations of VGA consoles, colours are downgraded to 16 foregrounds and 8 backgrounds. On fbdev consoles it would be possible to support them without quality loss, but adding that would require quite a large amount of code. Signed-off-by: Adam Borowski Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 79 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 3ad0b61e35b4..5149a72a84ff 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1231,6 +1231,52 @@ static void default_attr(struct vc_data *vc) vc->vc_color = vc->vc_def_color; } +struct rgb { u8 r; u8 g; u8 b; }; + +struct rgb rgb_from_256(int i) +{ + struct rgb c; + if (i < 8) { /* Standard colours. */ + c.r = i&1 ? 0xaa : 0x00; + c.g = i&2 ? 0xaa : 0x00; + c.b = i&4 ? 0xaa : 0x00; + } else if (i < 16) { + c.r = i&1 ? 0xff : 0x55; + c.g = i&2 ? 0xff : 0x55; + c.b = i&4 ? 0xff : 0x55; + } else if (i < 232) { /* 6x6x6 colour cube. */ + c.r = (i - 16) / 36 * 85 / 2; + c.g = (i - 16) / 6 % 6 * 85 / 2; + c.b = (i - 16) % 6 * 85 / 2; + } else /* Grayscale ramp. */ + c.r = c.g = c.b = i * 10 - 2312; + return c; +} + +static void rgb_foreground(struct vc_data *vc, struct rgb c) +{ + u8 hue, max = c.r; + if (c.g > max) + max = c.g; + if (c.b > max) + max = c.b; + hue = (c.r > max/2 ? 4 : 0) + | (c.g > max/2 ? 2 : 0) + | (c.b > max/2 ? 1 : 0); + if (hue == 7 && max <= 0x55) + hue = 0, vc->vc_intensity = 2; + else + vc->vc_intensity = (max > 0xaa) + 1; + vc->vc_color = (vc->vc_color & 0xf0) | hue; +} + +static void rgb_background(struct vc_data *vc, struct rgb c) +{ + /* For backgrounds, err on the dark side. */ + vc->vc_color = (vc->vc_color & 0x0f) + | (c.r&0x80) >> 1 | (c.g&0x80) >> 2 | (c.b&0x80) >> 3; +} + /* console_lock is held */ static void csi_m(struct vc_data *vc) { @@ -1302,8 +1348,7 @@ static void csi_m(struct vc_data *vc) case 27: vc->vc_reverse = 0; break; - case 38: - case 48: /* ITU T.416 + case 38: /* ITU T.416 * Higher colour modes. * They break the usual properties of SGR codes * and thus need to be detected and ignored by @@ -1315,15 +1360,41 @@ static void csi_m(struct vc_data *vc) i++; if (i > vc->vc_npar) break; - if (vc->vc_par[i] == 5) /* 256 colours */ - i++; /* ubiquitous */ - else if (vc->vc_par[i] == 2) /* 24 bit colours */ - i += 3; /* extremely rare */ + if (vc->vc_par[i] == 5 && /* 256 colours */ + i < vc->vc_npar) { /* ubiquitous */ + i++; + rgb_foreground(vc, + rgb_from_256(vc->vc_par[i])); + } else if (vc->vc_par[i] == 2 && /* 24 bit */ + i <= vc->vc_npar + 3) {/* extremely rare */ + struct rgb c = {r:vc->vc_par[i+1], + g:vc->vc_par[i+2], + b:vc->vc_par[i+3]}; + rgb_foreground(vc, c); + i += 3; + } /* Subcommands 3 (CMY) and 4 (CMYK) are so insane - * that detecting them is not worth the few extra - * bytes of kernel's size. + * there's no point in supporting them. */ break; + case 48: + i++; + if (i > vc->vc_npar) + break; + if (vc->vc_par[i] == 5 && /* 256 colours */ + i < vc->vc_npar) { + i++; + rgb_background(vc, + rgb_from_256(vc->vc_par[i])); + } else if (vc->vc_par[i] == 2 && /* 24 bit */ + i <= vc->vc_npar + 3) { + struct rgb c = {r:vc->vc_par[i+1], + g:vc->vc_par[i+2], + b:vc->vc_par[i+3]}; + rgb_background(vc, c); + i += 3; + } + break; case 39: vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0); break; -- cgit v1.2.3 From 8e25f8ce0e3227f20090f1b89b908d8146304413 Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Mon, 26 May 2014 21:32:42 +0200 Subject: drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc Cc: Greg Kroah-Hartman Signed-off-by: Fabian Frederick Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_hdlc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index ef42942a9390..644ddb841d9f 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -848,13 +848,11 @@ static struct n_hdlc *n_hdlc_alloc(void) { struct n_hdlc_buf *buf; int i; - struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL); + struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL); if (!n_hdlc) return NULL; - memset(n_hdlc, 0, sizeof(*n_hdlc)); - n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list); n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list); n_hdlc_buf_list_init(&n_hdlc->rx_buf_list); -- cgit v1.2.3 From 15a2743193b099f82657ca315dd2e1091be6c1d3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 23 May 2014 19:41:06 +1000 Subject: tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick() Some backends call hvc_kick() to wakeup the HVC thread from its slumber upon incoming characters. This however doesn't work properly because it uses msleep_interruptible() which is mostly immune to wake_up_process(). It will basically go back to sleep until the timeout is expired (only signals can really wake it). Replace it with a simple shedule_timeout_interruptible() instead, which may wakeup earlier every now and then but we really don't care in this case. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_console.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 94f9e3a38412..10942655a79d 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -760,10 +760,17 @@ static int khvcd(void *unused) if (poll_mask == 0) schedule(); else { + unsigned long j_timeout; + if (timeout < MAX_TIMEOUT) timeout += (timeout >> 6) + 1; - msleep_interruptible(timeout); + /* + * We don't use msleep_interruptible otherwise + * "kick" will fail to wake us up + */ + j_timeout = msecs_to_jiffies(timeout) + 1; + schedule_timeout_interruptible(j_timeout); } } __set_current_state(TASK_RUNNING); -- cgit v1.2.3 From 4061f4987b45d8d4126a57c8333cb3a8aeb3e08a Mon Sep 17 00:00:00 2001 From: Christopher Covington Date: Thu, 22 May 2014 18:07:18 -0400 Subject: ARM: tty: Move HVC DCC assembly to arch/arm Put architecture-specific assembly code where it belongs, allowing for support of additional architectures such as arm64 in the future. Signed-off-by: Christopher Covington Signed-off-by: Greg Kroah-Hartman --- arch/arm/include/asm/dcc.h | 41 +++++++++++++++++++++++++++++++++++++++++ drivers/tty/hvc/hvc_dcc.c | 42 ++---------------------------------------- 2 files changed, 43 insertions(+), 40 deletions(-) create mode 100644 arch/arm/include/asm/dcc.h (limited to 'drivers/tty') diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h new file mode 100644 index 000000000000..b74899de0774 --- /dev/null +++ b/arch/arm/include/asm/dcc.h @@ -0,0 +1,41 @@ +/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +static inline u32 __dcc_getstatus(void) +{ + u32 __ret; + asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + : "=r" (__ret) : : "cc"); + + return __ret; +} + +static inline char __dcc_getchar(void) +{ + char __c; + + asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + : "=r" (__c)); + isb(); + + return __c; +} + +static inline void __dcc_putchar(char c) +{ + asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" + : /* no output register */ + : "r" (c)); + isb(); +} diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c index 3502a7bbb69e..809920d80a66 100644 --- a/drivers/tty/hvc/hvc_dcc.c +++ b/drivers/tty/hvc/hvc_dcc.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -8,20 +8,11 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. */ -#include -#include -#include #include -#include -#include +#include #include #include "hvc_console.h" @@ -30,35 +21,6 @@ #define DCC_STATUS_RX (1 << 30) #define DCC_STATUS_TX (1 << 29) -static inline u32 __dcc_getstatus(void) -{ - u32 __ret; - asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" - : "=r" (__ret) : : "cc"); - - return __ret; -} - - -static inline char __dcc_getchar(void) -{ - char __c; - - asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" - : "=r" (__c)); - isb(); - - return __c; -} - -static inline void __dcc_putchar(char c) -{ - asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" - : /* no output register */ - : "r" (c)); - isb(); -} - static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) { int i; -- cgit v1.2.3 From e4bdab70dd07d8648a1ec3e029239aa86eb836b6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 May 2014 12:09:28 +0200 Subject: console: Use explicit pointer type for vc_uni_pagedir* fields The vc_data.vc_uni_pagedir filed is currently long int, supposedly to be served generically. This, however, leads to lots of cast to pointer, and rather it worsens the readability significantly. Actually, we have now only a single uni_pagedir map implementation, and this won't change likely. So, it'd be much more simple and error-prone to just use the exact pointer for struct uni_pagedir instead of long. Ditto for vc_uni_pagedir_loc. It's a pointer to the uni_pagedir, thus it can be changed similarly to the exact type. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/consolemap.c | 38 +++++++++++++++++++------------------- drivers/tty/vt/vt.c | 2 +- drivers/video/console/vgacon.c | 4 ++-- include/linux/console_struct.h | 5 +++-- 4 files changed, 25 insertions(+), 24 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 2978ca596a7f..3fdc786b6b2f 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -262,7 +262,7 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode) int m; if (glyph < 0 || glyph >= MAX_GLYPH) return 0; - else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc)) + else if (!(p = *conp->vc_uni_pagedir_loc)) return glyph; else if (use_unicode) { if (!p->inverse_trans_unicode) @@ -287,7 +287,7 @@ static void update_user_maps(void) for (i = 0; i < MAX_NR_CONSOLES; i++) { if (!vc_cons_allocated(i)) continue; - p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc; + p = *vc_cons[i].d->vc_uni_pagedir_loc; if (p && p != q) { set_inverse_transl(vc_cons[i].d, p, USER_MAP); set_inverse_trans_unicode(vc_cons[i].d, p); @@ -418,10 +418,10 @@ void con_free_unimap(struct vc_data *vc) { struct uni_pagedir *p; - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; if (!p) return; - *vc->vc_uni_pagedir_loc = 0; + *vc->vc_uni_pagedir_loc = NULL; if (--p->refcount) return; con_release_unimap(p); @@ -436,7 +436,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p) for (i = 0; i < MAX_NR_CONSOLES; i++) { if (!vc_cons_allocated(i)) continue; - q = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc; + q = *vc_cons[i].d->vc_uni_pagedir_loc; if (!q || q == p || q->sum != p->sum) continue; for (j = 0; j < 32; j++) { @@ -459,7 +459,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p) } if (j == 32) { q->refcount++; - *conp->vc_uni_pagedir_loc = (unsigned long)q; + *conp->vc_uni_pagedir_loc = q; con_release_unimap(p); kfree(p); return 1; @@ -500,7 +500,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui) { struct uni_pagedir *p, *q; - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; if (p && p->readonly) return -EIO; @@ -512,7 +512,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui) return -ENOMEM; } q->refcount=1; - *vc->vc_uni_pagedir_loc = (unsigned long)q; + *vc->vc_uni_pagedir_loc = q; } else { if (p == dflt) dflt = NULL; p->refcount++; @@ -539,7 +539,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) console_lock(); /* Save original vc_unipagdir_loc in case we allocate a new one */ - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; if (p->readonly) { console_unlock(); return -EIO; @@ -564,7 +564,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) * Since refcount was > 1, con_clear_unimap() allocated a * a new uni_pagedir for this vc. Re: p != q */ - q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + q = *vc->vc_uni_pagedir_loc; /* * uni_pgdir is a 32*32*64 table with rows allocated @@ -586,7 +586,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) err1 = con_insert_unipair(q, l, p2[k]); if (err1) { p->refcount++; - *vc->vc_uni_pagedir_loc = (unsigned long)p; + *vc->vc_uni_pagedir_loc = p; con_release_unimap(q); kfree(q); console_unlock(); @@ -655,12 +655,12 @@ int con_set_default_unimap(struct vc_data *vc) struct uni_pagedir *p; if (dflt) { - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; if (p == dflt) return 0; dflt->refcount++; - *vc->vc_uni_pagedir_loc = (unsigned long)dflt; + *vc->vc_uni_pagedir_loc = dflt; if (p && !--p->refcount) { con_release_unimap(p); kfree(p); @@ -674,7 +674,7 @@ int con_set_default_unimap(struct vc_data *vc) if (err) return err; - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; q = dfont_unitable; for (i = 0; i < 256; i++) @@ -685,7 +685,7 @@ int con_set_default_unimap(struct vc_data *vc) } if (con_unify_unimap(vc, p)) { - dflt = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + dflt = *vc->vc_uni_pagedir_loc; return err; } @@ -713,9 +713,9 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc) if (*dst_vc->vc_uni_pagedir_loc == *src_vc->vc_uni_pagedir_loc) return 0; con_free_unimap(dst_vc); - q = (struct uni_pagedir *)*src_vc->vc_uni_pagedir_loc; + q = *src_vc->vc_uni_pagedir_loc; q->refcount++; - *dst_vc->vc_uni_pagedir_loc = (long)q; + *dst_vc->vc_uni_pagedir_loc = q; return 0; } EXPORT_SYMBOL(con_copy_unimap); @@ -737,7 +737,7 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni ect = 0; if (*vc->vc_uni_pagedir_loc) { - p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc; + p = *vc->vc_uni_pagedir_loc; for (i = 0; i < 32; i++) if ((p1 = p->uni_pgdir[i])) for (j = 0; j < 32; j++) @@ -810,7 +810,7 @@ conv_uni_to_pc(struct vc_data *conp, long ucs) if (!*conp->vc_uni_pagedir_loc) return -3; - p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc; + p = *conp->vc_uni_pagedir_loc; if ((p1 = p->uni_pgdir[ucs >> 11]) && (p2 = p1[(ucs >> 6) & 0x1f]) && (h = p2[ucs & 0x3f]) < MAX_GLYPH) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5149a72a84ff..5e0f6ff2e2f5 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -735,7 +735,7 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_num = num; vc->vc_display_fg = &master_display_fg; vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir; - vc->vc_uni_pagedir = 0; + vc->vc_uni_pagedir = NULL; vc->vc_hi_font_mask = 0; vc->vc_complement_mask = 0; vc->vc_can_do_color = 0; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 9e18770aaba6..f267284b423b 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -87,7 +87,7 @@ static void vgacon_save_screen(struct vc_data *c); static int vgacon_scroll(struct vc_data *c, int t, int b, int dir, int lines); static void vgacon_invert_region(struct vc_data *c, u16 * p, int count); -static unsigned long vgacon_uni_pagedir; +static struct uni_pagedir *vgacon_uni_pagedir; static int vgacon_refcount; /* Description of the hardware situation */ @@ -554,7 +554,7 @@ static const char *vgacon_startup(void) static void vgacon_init(struct vc_data *c, int init) { - unsigned long p; + struct uni_pagedir *p; /* * We cannot be loaded as a module, therefore init is always 1, diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 7f0c32908568..e859c98d1767 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -17,6 +17,7 @@ #include struct vt_struct; +struct uni_pagedir; #define NPAR 16 @@ -104,8 +105,8 @@ struct vc_data { unsigned int vc_bell_pitch; /* Console bell pitch */ unsigned int vc_bell_duration; /* Console bell duration */ struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ - unsigned long vc_uni_pagedir; - unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ + struct uni_pagedir *vc_uni_pagedir; + struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */ /* additional information is in vt_kern.h */ }; -- cgit v1.2.3 From 91727b16d571155286cae941f35c752287ec49cf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 13 May 2014 12:09:29 +0200 Subject: console: Remove superfluous readonly check uni_pagedir.readonly is never set. Let's get rid of superfluous check codes. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/consolemap.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 3fdc786b6b2f..610b720d3b91 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -179,7 +179,6 @@ struct uni_pagedir { unsigned long sum; unsigned char *inverse_translations[4]; u16 *inverse_trans_unicode; - int readonly; }; static struct uni_pagedir *dflt; @@ -501,9 +500,6 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui) struct uni_pagedir *p, *q; p = *vc->vc_uni_pagedir_loc; - if (p && p->readonly) - return -EIO; - if (!p || --p->refcount) { q = kzalloc(sizeof(*p), GFP_KERNEL); if (!q) { @@ -536,19 +532,13 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) int err = 0, err1, i; struct uni_pagedir *p, *q; + if (!ct) + return 0; + console_lock(); /* Save original vc_unipagdir_loc in case we allocate a new one */ p = *vc->vc_uni_pagedir_loc; - if (p->readonly) { - console_unlock(); - return -EIO; - } - - if (!ct) { - console_unlock(); - return 0; - } if (p->refcount > 1) { int j, k; -- cgit v1.2.3 From 31964ffebbb958c6cf289c7c12edd7530d6221b9 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 24 Apr 2014 11:31:22 -0500 Subject: tty: serial: msm: Remove direct access to GSBI This patch removes direct access of the GSBI registers. GSBI configuration should be done through the GSBI driver directly. Signed-off-by: Andy Gross Signed-off-by: Kumar Gala --- drivers/tty/serial/msm_serial.c | 48 ++--------------------------------------- drivers/tty/serial/msm_serial.h | 5 ----- 2 files changed, 2 insertions(+), 51 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 053b98eb46c8..778e376f197e 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -52,7 +52,6 @@ struct msm_port { struct clk *clk; struct clk *pclk; unsigned int imr; - void __iomem *gsbi_base; int is_uartdm; unsigned int old_snap_state; }; @@ -599,9 +598,7 @@ static const char *msm_type(struct uart_port *port) static void msm_release_port(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); - struct msm_port *msm_port = UART_TO_MSM(port); struct resource *uart_resource; - struct resource *gsbi_resource; resource_size_t size; uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -612,28 +609,12 @@ static void msm_release_port(struct uart_port *port) release_mem_region(port->mapbase, size); iounmap(port->membase); port->membase = NULL; - - if (msm_port->gsbi_base) { - writel_relaxed(GSBI_PROTOCOL_IDLE, - msm_port->gsbi_base + GSBI_CONTROL); - - gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (unlikely(!gsbi_resource)) - return; - - size = resource_size(gsbi_resource); - release_mem_region(gsbi_resource->start, size); - iounmap(msm_port->gsbi_base); - msm_port->gsbi_base = NULL; - } } static int msm_request_port(struct uart_port *port) { - struct msm_port *msm_port = UART_TO_MSM(port); struct platform_device *pdev = to_platform_device(port->dev); struct resource *uart_resource; - struct resource *gsbi_resource; resource_size_t size; int ret; @@ -652,30 +633,8 @@ static int msm_request_port(struct uart_port *port) goto fail_release_port; } - gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1); - /* Is this a GSBI-based port? */ - if (gsbi_resource) { - size = resource_size(gsbi_resource); - - if (!request_mem_region(gsbi_resource->start, size, - "msm_serial")) { - ret = -EBUSY; - goto fail_release_port_membase; - } - - msm_port->gsbi_base = ioremap(gsbi_resource->start, size); - if (!msm_port->gsbi_base) { - ret = -EBUSY; - goto fail_release_gsbi; - } - } - return 0; -fail_release_gsbi: - release_mem_region(gsbi_resource->start, size); -fail_release_port_membase: - iounmap(port->membase); fail_release_port: release_mem_region(port->mapbase, size); return ret; @@ -683,7 +642,6 @@ fail_release_port: static void msm_config_port(struct uart_port *port, int flags) { - struct msm_port *msm_port = UART_TO_MSM(port); int ret; if (flags & UART_CONFIG_TYPE) { port->type = PORT_MSM; @@ -691,9 +649,6 @@ static void msm_config_port(struct uart_port *port, int flags) if (ret) return; } - if (msm_port->gsbi_base) - writel_relaxed(GSBI_PROTOCOL_UART, - msm_port->gsbi_base + GSBI_CONTROL); } static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) @@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_table[] = { static struct platform_driver msm_platform_driver = { .remove = msm_serial_remove, + .probe = msm_serial_probe, .driver = { .name = "msm_serial", .owner = THIS_MODULE, @@ -1125,7 +1081,7 @@ static int __init msm_serial_init(void) if (unlikely(ret)) return ret; - ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); + ret = platform_driver_register(&msm_platform_driver); if (unlikely(ret)) uart_unregister_driver(&msm_uart_driver); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index 1e9b68b6f9eb..d98d45efdf86 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -109,11 +109,6 @@ #define UART_ISR 0x0014 #define UART_ISR_TX_READY (1 << 7) -#define GSBI_CONTROL 0x0 -#define GSBI_PROTOCOL_CODE 0x30 -#define GSBI_PROTOCOL_UART 0x40 -#define GSBI_PROTOCOL_IDLE 0x0 - #define UARTDM_RXFS 0x50 #define UARTDM_RXFS_BUF_SHIFT 0x7 #define UARTDM_RXFS_BUF_MASK 0x7 -- cgit v1.2.3 From 58eb97c99da6a82c556ddec70683eb3863d4f617 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 29 May 2014 11:13:43 +0100 Subject: serial: sirf: Fix compilation failure After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix. Compile tested using ARM's multi_v7_defconfig Reported-by: Stephen Rothwell Cc: Jiri Slaby Cc: Qipan Li Signed-off-by: Daniel Thompson Acked-by: Barry Song Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 236f892dab9c..1f2be48c92ce 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -704,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long flags; struct dma_tx_state tx_state; - spin_lock_irqsave(&port->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport, -- cgit v1.2.3 From 2fe686ebafb43414c406c4c6252ad388a871bf1a Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 29 May 2014 09:48:43 +0100 Subject: serial: cpm_uart: No LF conversion in put_poll_char() In (c7d44a02a serial_core: Commonalize crlf when working w/ a non open console port) the core was modified to make the UART poll_put_char() automatically convert LF to CRLF. This driver's poll_put_char() adds a CR itself and this was not disabled by the above patch meaning currently it sends two CR characters. The code to issue a character is shared by the console write code (where driver must do LF to CRLF conversion, although it can make use of the uart_console_write() helper function) and the poll_put_char (where driver must not do the conversion). For that reason we add a flag rather than simply rip out the conversion code. Signed-off-by: Daniel Thompson Cc: Doug Anderson Cc: Jiri Slaby Cc: Christophe Leroy Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 7d76214612c7..aa60e6d13eca 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -971,7 +971,7 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) * Note that this is called with interrupts already disabled */ static void cpm_uart_early_write(struct uart_cpm_port *pinfo, - const char *string, u_int count) + const char *string, u_int count, bool handle_linefeed) { unsigned int i; cbd_t __iomem *bdp, *bdbase; @@ -1013,7 +1013,7 @@ static void cpm_uart_early_write(struct uart_cpm_port *pinfo, bdp++; /* if a LF, also do CR... */ - if (*string == 10) { + if (handle_linefeed && *string == 10) { while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) ; @@ -1111,7 +1111,7 @@ static void cpm_put_poll_char(struct uart_port *port, static char ch[2]; ch[0] = (char)c; - cpm_uart_early_write(pinfo, ch, 1); + cpm_uart_early_write(pinfo, ch, 1, false); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1275,7 +1275,7 @@ static void cpm_uart_console_write(struct console *co, const char *s, spin_lock_irqsave(&pinfo->port.lock, flags); } - cpm_uart_early_write(pinfo, s, count); + cpm_uart_early_write(pinfo, s, count, true); if (unlikely(nolock)) { local_irq_restore(flags); -- cgit v1.2.3 From 06d18289256ec58b78ae8d5b83ff70c3c34309f5 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 29 May 2014 09:48:44 +0100 Subject: serial: kgdb_nmi: Use container_of() to locate private data This corrects a crash in kgdb_nmi_tty_shutdown() which occurs when the function is called with port->tty set to NULL. All conversions between struct tty_port and struct kgdb_nmi_tty_priv have been switched to direct calls to container_of() to improve code clarity and consistancy. Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/kgdb_nmi.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 5f673b7ca50e..d51b2a1ba909 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -84,11 +84,6 @@ struct kgdb_nmi_tty_priv { STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo; }; -static struct kgdb_nmi_tty_priv *kgdb_nmi_port_to_priv(struct tty_port *port) -{ - return container_of(port, struct kgdb_nmi_tty_priv, port); -} - /* * Our debugging console is polled in a tasklet, so we'll check for input * every tick. In HZ-less mode, we should program the next tick. We have @@ -118,7 +113,7 @@ static void kgdb_tty_recv(int ch) * do that, and actually, we can't: we're in NMI context, no locks are * possible. */ - priv = kgdb_nmi_port_to_priv(kgdb_nmi_port); + priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port); kfifo_in(&priv->fifo, &c, 1); kgdb_tty_poke(); } @@ -216,7 +211,8 @@ static void kgdb_nmi_tty_receiver(unsigned long data) static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty) { - struct kgdb_nmi_tty_priv *priv = tty->driver_data; + struct kgdb_nmi_tty_priv *priv = + container_of(port, struct kgdb_nmi_tty_priv, port); kgdb_nmi_port = port; tasklet_schedule(&priv->tlet); @@ -225,7 +221,8 @@ static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty) static void kgdb_nmi_tty_shutdown(struct tty_port *port) { - struct kgdb_nmi_tty_priv *priv = port->tty->driver_data; + struct kgdb_nmi_tty_priv *priv = + container_of(port, struct kgdb_nmi_tty_priv, port); tasklet_kill(&priv->tlet); kgdb_nmi_port = NULL; -- cgit v1.2.3 From 8a0ff60f7eeab3df34d475c952b9d75799de8975 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 29 May 2014 09:48:45 +0100 Subject: serial: kgdb_nmi: Switch from tasklets to real timers kgdb_nmi uses tasklets on the assumption they will not be scheduled until the next timer tick. This assumption is invalid and can lead to live lock, continually servicing the kgdb_nmi tasklet. This is fixed by using the timer API instead. Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/kgdb_nmi.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index d51b2a1ba909..20d21d09ee86 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -80,24 +80,10 @@ static struct console kgdb_nmi_console = { struct kgdb_nmi_tty_priv { struct tty_port port; - struct tasklet_struct tlet; + struct timer_list timer; STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo; }; -/* - * Our debugging console is polled in a tasklet, so we'll check for input - * every tick. In HZ-less mode, we should program the next tick. We have - * to use the lowlevel stuff as no locks should be grabbed. - */ -#ifdef CONFIG_HIGH_RES_TIMERS -static void kgdb_tty_poke(void) -{ - tick_program_event(ktime_get(), 0); -} -#else -static inline void kgdb_tty_poke(void) {} -#endif - static struct tty_port *kgdb_nmi_port; static void kgdb_tty_recv(int ch) @@ -108,14 +94,13 @@ static void kgdb_tty_recv(int ch) if (!kgdb_nmi_port || ch < 0) return; /* - * Can't use port->tty->driver_data as tty might be not there. Tasklet + * Can't use port->tty->driver_data as tty might be not there. Timer * will check for tty and will get the ref, but here we don't have to * do that, and actually, we can't: we're in NMI context, no locks are * possible. */ priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port); kfifo_in(&priv->fifo, &c, 1); - kgdb_tty_poke(); } static int kgdb_nmi_poll_one_knock(void) @@ -199,7 +184,8 @@ static void kgdb_nmi_tty_receiver(unsigned long data) struct kgdb_nmi_tty_priv *priv = (void *)data; char ch; - tasklet_schedule(&priv->tlet); + priv->timer.expires = jiffies + (HZ/100); + add_timer(&priv->timer); if (likely(!kgdb_nmi_tty_enabled || !kfifo_len(&priv->fifo))) return; @@ -215,7 +201,9 @@ static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty) container_of(port, struct kgdb_nmi_tty_priv, port); kgdb_nmi_port = port; - tasklet_schedule(&priv->tlet); + priv->timer.expires = jiffies + (HZ/100); + add_timer(&priv->timer); + return 0; } @@ -224,7 +212,7 @@ static void kgdb_nmi_tty_shutdown(struct tty_port *port) struct kgdb_nmi_tty_priv *priv = container_of(port, struct kgdb_nmi_tty_priv, port); - tasklet_kill(&priv->tlet); + del_timer(&priv->timer); kgdb_nmi_port = NULL; } @@ -243,7 +231,7 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty) return -ENOMEM; INIT_KFIFO(priv->fifo); - tasklet_init(&priv->tlet, kgdb_nmi_tty_receiver, (unsigned long)priv); + setup_timer(&priv->timer, kgdb_nmi_tty_receiver, (unsigned long)priv); tty_port_init(&priv->port); priv->port.ops = &kgdb_nmi_tty_port_ops; tty->driver_data = priv; -- cgit v1.2.3 From bd71a1c08807966636daf52138119108c12c6061 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Thu, 29 May 2014 09:48:46 +0100 Subject: serial: kgdb_nmi: Improve console integration with KDB I/O kgdb_nmi_tty_enabled is used for two unrelated purposes, namely to suppress normal TTY input handling and to suppress console output (although it has no effect at all on TTY output). A much better way to handle muting the console is to not have to mute it in the first place! That's what this patch does. Signed-off-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/kgdb_nmi.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 20d21d09ee86..cfadf2971b12 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -44,13 +44,22 @@ MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)"); static bool kgdb_nmi_tty_enabled; +static int kgdb_nmi_console_setup(struct console *co, char *options) +{ + /* The NMI console uses the dbg_io_ops to issue console messages. To + * avoid duplicate messages during kdb sessions we must inform kdb's + * I/O utilities that messages sent to the console will automatically + * be displayed on the dbg_io. + */ + dbg_io_ops->is_console = true; + + return 0; +} + static void kgdb_nmi_console_write(struct console *co, const char *s, uint c) { int i; - if (!kgdb_nmi_tty_enabled || atomic_read(&kgdb_active) >= 0) - return; - for (i = 0; i < c; i++) dbg_io_ops->write_char(s[i]); } @@ -65,6 +74,7 @@ static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx) static struct console kgdb_nmi_console = { .name = "ttyNMI", + .setup = kgdb_nmi_console_setup, .write = kgdb_nmi_console_write, .device = kgdb_nmi_console_device, .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED, -- cgit v1.2.3 From 9ce4f8f3f45443922c98e25133b8c9790fc7949a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 29 May 2014 19:30:54 -0700 Subject: Revert "serial: imx: remove the DMA wait queue" This reverts commit e2f2786606d49d3aae545c61c04757a64cf7e5f0. Huang reports that this patch is broken and should be reverted. Cc: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 3b706add81a9..e2f93874989b 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -225,6 +225,7 @@ struct imx_port { void *rx_buf; unsigned int tx_bytes; unsigned int dma_tx_nents; + wait_queue_head_t dma_wait; }; struct imx_port_ucrs { @@ -415,10 +416,12 @@ static void imx_stop_tx(struct uart_port *port) return; } - if (sport->dma_is_enabled && sport->dma_is_txing) { - dmaengine_terminate_all(sport->dma_chan_tx); - sport->dma_is_txing = 0; - } + /* + * We are maybe in the SMP context, so if the DMA TX thread is running + * on other cpu, we have to wait for it to finish. + */ + if (sport->dma_is_enabled && sport->dma_is_txing) + return; temp = readl(sport->port.membase + UCR1); writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); @@ -432,10 +435,12 @@ static void imx_stop_rx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - if (sport->dma_is_enabled && sport->dma_is_rxing) { - dmaengine_terminate_all(sport->dma_chan_rx); - sport->dma_is_rxing = 0; - } + /* + * We are maybe in the SMP context, so if the DMA TX thread is running + * on other cpu, we have to wait for it to finish. + */ + if (sport->dma_is_enabled && sport->dma_is_rxing) + return; temp = readl(sport->port.membase + UCR2); writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); @@ -496,6 +501,12 @@ static void dma_tx_callback(void *data) dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); uart_write_wakeup(&sport->port); + + if (waitqueue_active(&sport->dma_wait)) { + wake_up(&sport->dma_wait); + dev_dbg(sport->port.dev, "exit in %s.\n", __func__); + return; + } } static void imx_dma_tx(struct imx_port *sport) @@ -868,6 +879,10 @@ static void imx_rx_dma_done(struct imx_port *sport) writel(temp, sport->port.membase + UCR1); sport->dma_is_rxing = 0; + + /* Is the shutdown waiting for us? */ + if (waitqueue_active(&sport->dma_wait)) + wake_up(&sport->dma_wait); } /* @@ -1014,6 +1029,8 @@ static void imx_enable_dma(struct imx_port *sport) { unsigned long temp; + init_waitqueue_head(&sport->dma_wait); + /* set UCR1 */ temp = readl(sport->port.membase + UCR1); temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN | @@ -1205,13 +1222,10 @@ static void imx_shutdown(struct uart_port *port) unsigned long flags; if (sport->dma_is_enabled) { - /* - * The upper layer may does not call the @->stop_tx and - * @->stop_rx, so we call them ourselves. - */ - imx_stop_tx(port); + /* We have to wait for the DMA to finish. */ + wait_event(sport->dma_wait, + !sport->dma_is_rxing && !sport->dma_is_txing); imx_stop_rx(port); - imx_disable_dma(sport); imx_uart_dma_exit(sport); } -- cgit v1.2.3 From a8fe19ebfbfd90ec17c02284717238b02efb9580 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 4 Jun 2014 16:11:46 -0700 Subject: kernel/printk: use symbolic defines for console loglevels ... instead of naked numbers. Stuff in sysrq.c used to set it to 8 which is supposed to mean above default level so set it to DEBUG instead as we're terminating/killing all tasks and we want to be verbose there. Also, correct the check in x86_64_start_kernel which should be >= as we're clearly issuing the string there for all debug levels, not only the magical 10. Signed-off-by: Borislav Petkov Acked-by: Kees Cook Acked-by: Randy Dunlap Cc: Joe Perches Cc: Valdis Kletnieks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kernel/head64.c | 2 +- arch/x86/platform/uv/uv_nmi.c | 2 +- drivers/nubus/nubus.c | 18 +++++++++--------- drivers/tty/sysrq.c | 8 ++++---- include/linux/printk.h | 15 +++++++++++++-- init/main.c | 4 ++-- kernel/debug/kdb/kdb_bt.c | 2 +- kernel/debug/kdb/kdb_io.c | 2 +- kernel/debug/kdb/kdb_main.c | 2 +- kernel/printk/printk.c | 13 +++---------- 10 files changed, 36 insertions(+), 32 deletions(-) (limited to 'drivers/tty') diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 068054f4bf20..eda1a865641e 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -172,7 +172,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data) */ load_ucode_bsp(); - if (console_loglevel == 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) early_printk("Kernel alive\n"); clear_page(init_level4_pgt); diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c index be27da60dc8f..c89c93320c12 100644 --- a/arch/x86/platform/uv/uv_nmi.c +++ b/arch/x86/platform/uv/uv_nmi.c @@ -85,7 +85,7 @@ static cpumask_var_t uv_nmi_cpu_mask; * Default is all stack dumps go to the console and buffer. * Lower level to send to log buffer only. */ -static int uv_nmi_loglevel = 7; +static int uv_nmi_loglevel = CONSOLE_LOGLEVEL_DEFAULT; module_param_named(dump_loglevel, uv_nmi_loglevel, int, 0644); /* diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c index 43926cd25ae8..5066a7ef7b6c 100644 --- a/drivers/nubus/nubus.c +++ b/drivers/nubus/nubus.c @@ -473,7 +473,7 @@ static struct nubus_dev* __init if (slot == 0 && (unsigned long)dir.base % 2) dir.base += 1; - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_functional_resource: parent is 0x%p, dir is 0x%p\n", parent->base, dir.base); @@ -568,7 +568,7 @@ static int __init nubus_get_vidnames(struct nubus_board* board, printk(KERN_INFO " video modes supported:\n"); nubus_get_subdir(parent, &dir); - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_vidnames: parent is 0x%p, dir is 0x%p\n", parent->base, dir.base); @@ -629,7 +629,7 @@ static int __init nubus_get_vendorinfo(struct nubus_board* board, printk(KERN_INFO " vendor info:\n"); nubus_get_subdir(parent, &dir); - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_vendorinfo: parent is 0x%p, dir is 0x%p\n", parent->base, dir.base); @@ -654,7 +654,7 @@ static int __init nubus_get_board_resource(struct nubus_board* board, int slot, struct nubus_dirent ent; nubus_get_subdir(parent, &dir); - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_board_resource: parent is 0x%p, dir is 0x%p\n", parent->base, dir.base); @@ -753,19 +753,19 @@ static void __init nubus_find_rom_dir(struct nubus_board* board) if (nubus_readdir(&dir, &ent) == -1) goto badrom; - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_INFO "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); /* This one takes us to where we want to go. */ if (nubus_readdir(&dir, &ent) == -1) goto badrom; - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); nubus_get_subdir(&ent, &dir); /* Resource ID 01, also an "Unknown Macintosh" */ if (nubus_readdir(&dir, &ent) == -1) goto badrom; - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); /* FIXME: the first one is *not* always the right one. We @@ -780,7 +780,7 @@ static void __init nubus_find_rom_dir(struct nubus_board* board) path to that address... */ if (nubus_readdir(&dir, &ent) == -1) goto badrom; - if (console_loglevel >= 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); /* Bwahahahaha... */ @@ -816,7 +816,7 @@ static struct nubus_board* __init nubus_add_board(int slot, int bytelanes) board->fblock = rp; /* Dump the format block for debugging purposes */ - if (console_loglevel >= 10) { + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) { int i; printk(KERN_DEBUG "Slot %X, format block at 0x%p\n", slot, rp); diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index ce396ecdf412..b767a64e49d9 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -88,7 +88,7 @@ static void sysrq_handle_loglevel(int key) int i; i = key - '0'; - console_loglevel = 7; + console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; printk("Loglevel set to %d\n", i); console_loglevel = i; } @@ -343,7 +343,7 @@ static void send_sig_all(int sig) static void sysrq_handle_term(int key) { send_sig_all(SIGTERM); - console_loglevel = 8; + console_loglevel = CONSOLE_LOGLEVEL_DEBUG; } static struct sysrq_key_op sysrq_term_op = { .handler = sysrq_handle_term, @@ -387,7 +387,7 @@ static struct sysrq_key_op sysrq_thaw_op = { static void sysrq_handle_kill(int key) { send_sig_all(SIGKILL); - console_loglevel = 8; + console_loglevel = CONSOLE_LOGLEVEL_DEBUG; } static struct sysrq_key_op sysrq_kill_op = { .handler = sysrq_handle_kill, @@ -520,7 +520,7 @@ void __handle_sysrq(int key, bool check_mask) * routing in the consumers of /proc/kmsg. */ orig_log_level = console_loglevel; - console_loglevel = 7; + console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; printk(KERN_INFO "SysRq : "); op_p = __sysrq_get_key_op(key); diff --git a/include/linux/printk.h b/include/linux/printk.h index 37f3a6589c1c..319ff7e53efb 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -30,6 +30,17 @@ static inline const char *printk_skip_level(const char *buffer) return buffer; } +/* printk's without a loglevel use this.. */ +#define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL + +/* We show everything that is MORE important than this.. */ +#define CONSOLE_LOGLEVEL_SILENT 0 /* Mum's the word */ +#define CONSOLE_LOGLEVEL_MIN 1 /* Minimum loglevel we let people use */ +#define CONSOLE_LOGLEVEL_QUIET 4 /* Shhh ..., when booted with "quiet" */ +#define CONSOLE_LOGLEVEL_DEFAULT 7 /* anything MORE serious than KERN_DEBUG */ +#define CONSOLE_LOGLEVEL_DEBUG 10 /* issue debug messages */ +#define CONSOLE_LOGLEVEL_MOTORMOUTH 15 /* You can't shut this one up */ + extern int console_printk[]; #define console_loglevel (console_printk[0]) @@ -39,13 +50,13 @@ extern int console_printk[]; static inline void console_silent(void) { - console_loglevel = 0; + console_loglevel = CONSOLE_LOGLEVEL_SILENT; } static inline void console_verbose(void) { if (console_loglevel) - console_loglevel = 15; + console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH; } struct va_format { diff --git a/init/main.c b/init/main.c index e08c0b2065a1..04fab8d74c89 100644 --- a/init/main.c +++ b/init/main.c @@ -203,13 +203,13 @@ EXPORT_SYMBOL(loops_per_jiffy); static int __init debug_kernel(char *str) { - console_loglevel = 10; + console_loglevel = CONSOLE_LOGLEVEL_DEBUG; return 0; } static int __init quiet_kernel(char *str) { - console_loglevel = 4; + console_loglevel = CONSOLE_LOGLEVEL_QUIET; return 0; } diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c index b03e0e814e43..fe15fff5df53 100644 --- a/kernel/debug/kdb/kdb_bt.c +++ b/kernel/debug/kdb/kdb_bt.c @@ -21,7 +21,7 @@ static void kdb_show_stack(struct task_struct *p, void *addr) { int old_lvl = console_loglevel; - console_loglevel = 15; + console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH; kdb_trap_printk++; kdb_set_current_task(p); if (addr) { diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 14ff4849262c..7c70812caea5 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -710,7 +710,7 @@ kdb_printit: } if (logging) { saved_loglevel = console_loglevel; - console_loglevel = 0; + console_loglevel = CONSOLE_LOGLEVEL_SILENT; printk(KERN_INFO "%s", kdb_buffer); } diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 0b097c8a1e50..2f7c760305ca 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1091,7 +1091,7 @@ static int kdb_reboot(int argc, const char **argv) static void kdb_dumpregs(struct pt_regs *regs) { int old_lvl = console_loglevel; - console_loglevel = 15; + console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH; kdb_trap_printk++; show_regs(regs); kdb_trap_printk--; diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 923c5d4e4202..ea2d5f6962ed 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -54,18 +54,11 @@ #include "console_cmdline.h" #include "braille.h" -/* printk's without a loglevel use this.. */ -#define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL - -/* We show everything that is MORE important than this.. */ -#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */ -#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */ - int console_printk[4] = { - DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */ + CONSOLE_LOGLEVEL_DEFAULT, /* console_loglevel */ DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */ - MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */ - DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */ + CONSOLE_LOGLEVEL_MIN, /* minimum_console_loglevel */ + CONSOLE_LOGLEVEL_DEFAULT, /* default_console_loglevel */ }; /* Deferred messaged from sched code are marked by this special level */ -- cgit v1.2.3 From 984d74a72076a12b400339973e8c98fd2fcd90e5 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Fri, 6 Jun 2014 14:38:13 -0700 Subject: sysrq: rcu-ify __handle_sysrq Echoing values into /proc/sysrq-trigger seems to be a popular way to get information out of the kernel. However, dumping information about thousands of processes, or hundreds of CPUs to serial console can result in IRQs being blocked for minutes, resulting in various kinds of cascade failures. The most common failure is due to interrupts being blocked for a very long time. This can lead to things like failed IO requests, and other things the system cannot easily recover from. This problem is easily fixable by making __handle_sysrq use RCU instead of spin_lock_irqsave. This leaves the warning that RCU grace periods have not elapsed for a long time, but the system will come back from that automatically. It also leaves sysrq-from-irq-context when the sysrq keys are pressed, but that is probably desired since people want that to work in situations where the system is already hosed. The callers of register_sysrq_key and unregister_sysrq_key appear to be capable of sleeping. Signed-off-by: Rik van Riel Reported-by: Madper Xie Cc: Randy Dunlap Cc: Richard Weinberger Cc: Paul E. McKenney Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/tty/sysrq.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index b767a64e49d9..7430e87d7352 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -510,9 +510,8 @@ void __handle_sysrq(int key, bool check_mask) struct sysrq_key_op *op_p; int orig_log_level; int i; - unsigned long flags; - spin_lock_irqsave(&sysrq_key_table_lock, flags); + rcu_read_lock(); /* * Raise the apparent loglevel to maximum so that the sysrq header * is shown to provide the user with positive feedback. We do not @@ -554,7 +553,7 @@ void __handle_sysrq(int key, bool check_mask) printk("\n"); console_loglevel = orig_log_level; } - spin_unlock_irqrestore(&sysrq_key_table_lock, flags); + rcu_read_unlock(); } void handle_sysrq(int key) @@ -1043,16 +1042,23 @@ static int __sysrq_swap_key_ops(int key, struct sysrq_key_op *insert_op_p, struct sysrq_key_op *remove_op_p) { int retval; - unsigned long flags; - spin_lock_irqsave(&sysrq_key_table_lock, flags); + spin_lock(&sysrq_key_table_lock); if (__sysrq_get_key_op(key) == remove_op_p) { __sysrq_put_key_op(key, insert_op_p); retval = 0; } else { retval = -1; } - spin_unlock_irqrestore(&sysrq_key_table_lock, flags); + spin_unlock(&sysrq_key_table_lock); + + /* + * A concurrent __handle_sysrq either got the old op or the new op. + * Wait for it to go away before returning, so the code for an old + * op is not freed (eg. on module unload) while it is in use. + */ + synchronize_rcu(); + return retval; } -- cgit v1.2.3 From 722773afd83209d4088d30946bc274f547528a0b Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Fri, 6 Jun 2014 14:38:14 -0700 Subject: sysrq,rcu: suppress RCU stall warnings while sysrq runs Some sysrq handlers can run for a long time, because they dump a lot of data onto a serial console. Having RCU stall warnings pop up in the middle of them only makes the problem worse. This patch temporarily disables RCU stall warnings while a sysrq request is handled. Signed-off-by: Rik van Riel Suggested-by: Paul McKenney Signed-off-by: Paul E. McKenney Cc: Madper Xie Cc: Randy Dunlap Cc: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/tty/sysrq.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 7430e87d7352..454b65898e2c 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -511,6 +512,7 @@ void __handle_sysrq(int key, bool check_mask) int orig_log_level; int i; + rcu_sysrq_start(); rcu_read_lock(); /* * Raise the apparent loglevel to maximum so that the sysrq header @@ -554,6 +556,7 @@ void __handle_sysrq(int key, bool check_mask) console_loglevel = orig_log_level; } rcu_read_unlock(); + rcu_sysrq_end(); } void handle_sysrq(int key) -- cgit v1.2.3