From 6cf7f002e70773fc11d032628edd2ecc679fe05b Mon Sep 17 00:00:00 2001 From: Louis Yu Date: Tue, 1 Aug 2017 15:28:31 +0800 Subject: thermal: mediatek: add Mediatek thermal driver for mt2712 This patch adds support for mt2712 chip to mtk_thermal, and integrate mt2712 into the same mediatek thermal driver. MT2712 has only 1 bank and 4 sensors. Signed-off-by: Louis Yu Reviewed-by: Dawei Chien Signed-off-by: Zhang Rui --- drivers/thermal/mtk_thermal.c | 70 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 66 insertions(+), 4 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 7737f14846f9..e35d28d4e8f8 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -3,6 +3,7 @@ * Author: Hanyi Wu * Sascha Hauer * Dawei Chien + * Louis Yu * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -111,9 +112,10 @@ /* * Layout of the fuses providing the calibration data - * These macros could be used for both MT8173 and MT2701. + * These macros could be used for both MT8173, MT2701, and MT2712. * MT8173 has five sensors and need five VTS calibration data, - * and MT2701 has three sensors and need three VTS calibration data. + * and MT2701 has three sensors and need three VTS calibration data, + * and MT2712 has four sensors and need four VTS calibration data. */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) @@ -136,11 +138,26 @@ /* The total number of temperature sensors in the MT2701 */ #define MT2701_NUM_SENSORS 3 -#define THERMAL_NAME "mtk-thermal" - /* The number of sensing points per bank */ #define MT2701_NUM_SENSORS_PER_ZONE 3 +/* MT2712 thermal sensors */ +#define MT2712_TS1 0 +#define MT2712_TS2 1 +#define MT2712_TS3 2 +#define MT2712_TS4 3 + +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT2712_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT2712 */ +#define MT2712_NUM_SENSORS 4 + +/* The number of sensing points per bank */ +#define MT2712_NUM_SENSORS_PER_ZONE 4 + +#define THERMAL_NAME "mtk-thermal" + struct mtk_thermal; struct thermal_bank_cfg { @@ -215,6 +232,21 @@ static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; +/* MT2712 thermal sensor data */ +static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { + MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 +}; + +static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 +}; + +static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +}; + +static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; + /** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 @@ -277,6 +309,31 @@ static const struct mtk_thermal_data mt2701_thermal_data = { .sensor_mux_values = mt2701_mux_values, }; +/** + * The MT2712 thermal controller has one bank, which can read up to + * four temperature sensors simultaneously. The MT2712 has a total of 4 + * temperature sensors. + * + * The thermal core only gets the maximum temperature of this one bank, + * so the bank concept wouldn't be necessary here. However, the SVS (Smart + * Voltage Scaling) unit makes its decisions based on the same bank + * data. + */ +static const struct mtk_thermal_data mt2712_thermal_data = { + .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, + .num_banks = 1, + .num_sensors = MT2712_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 4, + .sensors = mt2712_bank_data, + }, + }, + .msr = mt2712_msr, + .adcpnp = mt2712_adcpnp, + .sensor_mux_values = mt2712_mux_values, +}; + /** * raw_to_mcelsius - convert a raw ADC value to mcelsius * @mt: The thermal controller @@ -571,6 +628,10 @@ static const struct of_device_id mtk_thermal_of_match[] = { { .compatible = "mediatek,mt2701-thermal", .data = (void *)&mt2701_thermal_data, + }, + { + .compatible = "mediatek,mt2712-thermal", + .data = (void *)&mt2712_thermal_data, }, { }, }; @@ -705,6 +766,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); +MODULE_AUTHOR("Louis Yu "); MODULE_AUTHOR("Dawei Chien "); MODULE_AUTHOR("Sascha Hauer "); MODULE_AUTHOR("Hanyi Wu "); -- cgit v1.2.3