From 366444ebe7e2e1c987c6a07551f06db4b5b7c0ad Mon Sep 17 00:00:00 2001 From: Bryan Brattlof Date: Mon, 31 Oct 2022 18:26:55 -0500 Subject: thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround Some of TI's J721E SoCs require a software trimming procedure for the temperature monitors to function properly. To determine if a particular J721E is not affected by this erratum, both bits in the WKUP_SPARE_FUSE0 region must be set. Other SoCs, not affected by this erratum, will not need this region. Map the 'fuse_base' region only when the erratum fix is needed. Signed-off-by: Bryan Brattlof Link: https://lore.kernel.org/r/20221031232702.10339-5-bb@ti.com Signed-off-by: Daniel Lezcano --- drivers/thermal/k3_j72xx_bandgap.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) (limited to 'drivers/thermal') diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c index 395a73cb3742..031ea1091909 100644 --- a/drivers/thermal/k3_j72xx_bandgap.c +++ b/drivers/thermal/k3_j72xx_bandgap.c @@ -386,15 +386,32 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev) if (IS_ERR(bgp->cfg2_base)) return PTR_ERR(bgp->cfg2_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - fuse_base = devm_ioremap_resource(dev, res); - if (IS_ERR(fuse_base)) - return PTR_ERR(fuse_base); - driver_data = of_device_get_match_data(dev); if (driver_data) workaround_needed = driver_data->has_errata_i2128; + /* + * Some of TI's J721E SoCs require a software trimming procedure + * for the temperature monitors to function properly. To determine + * if this particular SoC is NOT affected, both bits in the + * WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating + * when software trimming should NOT be applied. + * + * https://www.ti.com/lit/er/sprz455c/sprz455c.pdf + */ + if (workaround_needed) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + fuse_base = devm_ioremap_resource(dev, res); + if (IS_ERR(fuse_base)) + return PTR_ERR(fuse_base); + + if ((readl(fuse_base) & 0xc0000000) == 0xc0000000) + workaround_needed = false; + } + + dev_dbg(bgp->dev, "Work around %sneeded\n", + workaround_needed ? "" : "not "); + pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { @@ -427,13 +444,6 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev) goto err_free_ref_table; } - /* Workaround not needed if bit30/bit31 is set even for J721e */ - if (workaround_needed && (readl(fuse_base + 0x0) & 0xc0000000) == 0xc0000000) - workaround_needed = false; - - dev_dbg(bgp->dev, "Work around %sneeded\n", - workaround_needed ? "" : "not "); - if (!workaround_needed) init_table(5, ref_table, golden_factors); else -- cgit v1.2.3