From 5f2392b865fb3418e6d9de2cea15d64932b49fcb Mon Sep 17 00:00:00 2001
From: Xenia Ragiadakou <burzalodowa@gmail.com>
Date: Wed, 19 Jun 2013 04:58:07 +0300
Subject: staging: rtl8192u: fix comments in r819xU_phy.c
This patch fixes the comments in r819xU_phy.c by:
- replacing "// ..." with "/* .... */"
- removing unnecessary comments, the dates and names of
developers from comments
- fixing some inconsistent comments
- fixing some typos
- fixing alignment issues
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/rtl8192u/r819xU_phy.c | 908 ++++++++++++++++++----------------
1 file changed, 475 insertions(+), 433 deletions(-)
(limited to 'drivers/staging/rtl8192u')
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 9bfcd2f451f7..627165a33620 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -11,20 +11,20 @@
static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
0,
- 0x085c, //2412 1
- 0x08dc, //2417 2
- 0x095c, //2422 3
- 0x09dc, //2427 4
- 0x0a5c, //2432 5
- 0x0adc, //2437 6
- 0x0b5c, //2442 7
- 0x0bdc, //2447 8
- 0x0c5c, //2452 9
- 0x0cdc, //2457 10
- 0x0d5c, //2462 11
- 0x0ddc, //2467 12
- 0x0e5c, //2472 13
- 0x0f72, //2484
+ 0x085c, /* 2412 1 */
+ 0x08dc, /* 2417 2 */
+ 0x095c, /* 2422 3 */
+ 0x09dc, /* 2427 4 */
+ 0x0a5c, /* 2432 5 */
+ 0x0adc, /* 2437 6 */
+ 0x0b5c, /* 2442 7 */
+ 0x0bdc, /* 2447 8 */
+ 0x0c5c, /* 2452 9 */
+ 0x0cdc, /* 2457 10 */
+ 0x0d5c, /* 2462 11 */
+ 0x0ddc, /* 2467 12 */
+ 0x0e5c, /* 2472 13 */
+ 0x0f72, /* 2484 */
};
@@ -38,12 +38,12 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array
/******************************************************************************
- *function: This function read BB parameters from Header file we gen,
- * and do register read/write
- * input: u32 bitmask //taget bit pos in the addr to be modified
- * output: none
- * return: u32 return the shift bit position of the mask
- * ****************************************************************************/
+ * function: This function reads BB parameters from header file we generate,
+ * and does register read/write
+ * input: u32 bitmask //taget bit pos in the addr to be modified
+ * output: none
+ * return: u32 return the shift bit position of the mask
+ ******************************************************************************/
u32 rtl8192_CalculateBitShift(u32 bitmask)
{
u32 i;
@@ -51,11 +51,13 @@ u32 rtl8192_CalculateBitShift(u32 bitmask)
return i;
}
/******************************************************************************
- *function: This function check different RF type to execute legal judgement. If RF Path is illegal, we will return false.
- * input: none
- * output: none
- * return: 0(illegal, false), 1(legal,true)
- * ***************************************************************************/
+ * function: This function checks different RF type to execute legal judgement.
+ * If RF Path is illegal, we will return false.
+ * input: net_device *dev
+ * u32 eRFPath
+ * output: none
+ * return: 0(illegal, false), 1(legal, true)
+ *****************************************************************************/
u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
{
u8 ret = 1;
@@ -71,22 +73,22 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
return ret;
}
/******************************************************************************
- *function: This function set specific bits to BB register
- * input: net_device dev
- * u32 reg_addr //target addr to be modified
- * u32 bitmask //taget bit pos in the addr to be modified
- * u32 data //value to be write
- * output: none
- * return: none
- * notice:
- * ****************************************************************************/
+ * function: This function sets specific bits to BB register
+ * input: net_device *dev
+ * u32 reg_addr //target addr to be modified
+ * u32 bitmask //taget bit pos to be modified
+ * u32 data //value to be write
+ * output: none
+ * return: none
+ * notice:
+ ******************************************************************************/
void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr, u32 bitmask,
u32 data)
{
u32 reg, bitshift;
- if (bitmask != bMaskDWord) { //if not "double word" write
+ if (bitmask != bMaskDWord) {
read_nic_dword(dev, reg_addr, ®);
bitshift = rtl8192_CalculateBitShift(bitmask);
reg &= ~bitmask;
@@ -98,14 +100,14 @@ void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr, u32 bitmask,
return;
}
/******************************************************************************
- *function: This function reads specific bits from BB register
- * input: net_device dev
- * u32 reg_addr //target addr to be readback
- * u32 bitmask //taget bit pos in the addr to be readback
- * output: none
- * return: u32 data //the readback register value
- * notice:
- * ****************************************************************************/
+ * function: This function reads specific bits from BB register
+ * input: net_device *dev
+ * u32 reg_addr //target addr to be readback
+ * u32 bitmask //taget bit pos to be readback
+ * output: none
+ * return: u32 data //the readback register value
+ * notice:
+ ******************************************************************************/
u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask)
{
u32 reg, bitshift;
@@ -123,14 +125,19 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
u32 data);
/******************************************************************************
- *function: This function read register from RF chip
- * input: net_device dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
- * u32 offset //target address to be read
- * output: none
- * return: u32 readback value
- * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
- * ****************************************************************************/
+ * function: This function reads register from RF chip
+ * input: net_device *dev
+ * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * u32 offset //target address to be read
+ * output: none
+ * return: u32 readback value
+ * notice: There are three types of serial operations:
+ * (1) Software serial write.
+ * (2)Hardware LSSI-Low Speed Serial Interface.
+ * (3)Hardware HSSI-High speed serial write.
+ * Driver here need to implement (1) and (2)
+ * ---need more spec for this information.
+ ******************************************************************************/
u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 offset)
{
@@ -139,21 +146,21 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 new_offset = 0;
BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0);
- //make sure RF register offset is correct
+ /* Make sure RF register offset is correct */
offset &= 0x3f;
- //switch page for 8256 RF IC
+ /* Switch page for 8256 RF IC */
if (priv->rf_chip == RF_8256) {
if (offset >= 31) {
priv->RfReg0Value[eRFPath] |= 0x140;
- //Switch to Reg_Mode2 for Reg 31-45
+ /* Switch to Reg_Mode2 for Reg 31-45 */
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
- //modify offset
+ /* Modify offset */
new_offset = offset - 30;
} else if (offset >= 16) {
priv->RfReg0Value[eRFPath] |= 0x100;
priv->RfReg0Value[eRFPath] &= (~0x40);
- //Switch to Reg_Mode 1 for Reg16-30
+ /* Switch to Reg_Mode1 for Reg16-30 */
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
new_offset = offset - 15;
@@ -164,21 +171,20 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n");
new_offset = offset;
}
- //put desired read addr to LSSI control Register
+ /* Put desired read addr to LSSI control Register */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, new_offset);
- //Issue a posedge trigger
- //
+ /* Issue a posedge trigger */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0);
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);
- // TODO: we should not delay such a long time. Ask for help from SD3
+ /* TODO: we should not delay such a long time. Ask for help from SD3 */
msleep(1);
ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
- // Switch back to Reg_Mode0;
+ /* Switch back to Reg_Mode0 */
if (priv->rf_chip == RF_8256) {
priv->RfReg0Value[eRFPath] &= 0xebf;
@@ -194,25 +200,25 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
}
/******************************************************************************
- *function: This function write data to RF register
- * input: net_device dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
- * u32 offset //target address to be written
- * u32 data //The new register data to be written
- * output: none
- * return: none
- * notice: For RF8256 only.
- ===========================================================
- *Reg Mode RegCTL[1] RegCTL[0] Note
+ * function: This function writes data to RF register
+ * input: net_device *dev
+ * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * u32 offset //target address to be written
+ * u32 data //the new register data to be written
+ * output: none
+ * return: none
+ * notice: For RF8256 only.
+ * ===========================================================================
+ * Reg Mode RegCTL[1] RegCTL[0] Note
* (Reg00[12]) (Reg00[10])
- *===========================================================
- *Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf)
- *------------------------------------------------------------------
- *Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf)
- *------------------------------------------------------------------
+ * ===========================================================================
+ * Reg_Mode0 0 x Reg 0 ~ 15(0x0 ~ 0xf)
+ * ---------------------------------------------------------------------------
+ * Reg_Mode1 1 0 Reg 16 ~ 30(0x1 ~ 0xf)
+ * ---------------------------------------------------------------------------
* Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
- *------------------------------------------------------------------
- * ****************************************************************************/
+ * ---------------------------------------------------------------------------
+ *****************************************************************************/
void rtl8192_phy_RFSerialWrite(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath, u32 offset, u32 data)
{
@@ -240,17 +246,17 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev,
new_offset = offset;
}
- // Put write addr in [5:0] and write data in [31:16]
+ /* Put write addr in [5:0] and write data in [31:16] */
DataAndAddr = (data<<16) | (new_offset&0x3f);
- // Write Operation
+ /* Write operation */
rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
if (offset == 0x0)
priv->RfReg0Value[eRFPath] = data;
- // Switch back to Reg_Mode0;
+ /* Switch back to Reg_Mode0 */
if (priv->rf_chip == RF_8256) {
if (offset != 0) {
priv->RfReg0Value[eRFPath] &= 0xebf;
@@ -265,16 +271,16 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev,
}
/******************************************************************************
- *function: This function set specific bits to RF register
- * input: net_device dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
- * u32 reg_addr //target addr to be modified
- * u32 bitmask //taget bit pos in the addr to be modified
- * u32 data //value to be write
- * output: none
- * return: none
- * notice:
- * ****************************************************************************/
+ * function: This function set specific bits to RF register
+ * input: net_device dev
+ * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * u32 reg_addr //target addr to be modified
+ * u32 bitmask //taget bit pos to be modified
+ * u32 data //value to be written
+ * output: none
+ * return: none
+ * notice:
+ *****************************************************************************/
void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask, u32 data)
{
@@ -285,7 +291,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
return;
if (priv->Rf_Mode == RF_OP_By_FW) {
- if (bitmask != bMask12Bits) { // RF data is 12 bits only
+ if (bitmask != bMask12Bits) {
+ /* RF data is 12 bits only */
reg = phy_FwRFSerialRead(dev, eRFPath, reg_addr);
bitshift = rtl8192_CalculateBitShift(bitmask);
reg &= ~bitmask;
@@ -299,7 +306,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
udelay(200);
} else {
- if (bitmask != bMask12Bits) { // RF data is 12 bits only
+ if (bitmask != bMask12Bits) {
+ /* RF data is 12 bits only */
reg = rtl8192_phy_RFSerialRead(dev, eRFPath, reg_addr);
bitshift = rtl8192_CalculateBitShift(bitmask);
reg &= ~bitmask;
@@ -314,14 +322,14 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
}
/******************************************************************************
- *function: This function reads specific bits from RF register
- * input: net_device dev
- * u32 reg_addr //target addr to be readback
- * u32 bitmask //taget bit pos in the addr to be readback
- * output: none
- * return: u32 data //the readback register value
- * notice:
- * ****************************************************************************/
+ * function: This function reads specific bits from RF register
+ * input: net_device *dev
+ * u32 reg_addr //target addr to be readback
+ * u32 bitmask //taget bit pos to be readback
+ * output: none
+ * return: u32 data //the readback register value
+ * notice:
+ *****************************************************************************/
u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask)
{
@@ -345,12 +353,14 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
}
}
/******************************************************************************
- *function: We support firmware to execute RF-R/W.
- * input: dev
- * output: none
- * return: none
- * notice:
- * ***************************************************************************/
+ * function: We support firmware to execute RF-R/W.
+ * input: net_device *dev
+ * RF90_RADIO_PATH_E eRFPath
+ * u32 offset
+ * output: none
+ * return: u32
+ * notice:
+ ****************************************************************************/
static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 offset)
{
@@ -358,21 +368,23 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
u32 data = 0;
u8 time = 0;
u32 tmp;
- /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
- not execute the scheme in the initial step. Otherwise, RF-R/W will waste
- much time. This is only for site survey. */
- // 1. Read operation need not insert data. bit 0-11
- // 2. Write RF register address. Bit 12-19
+ /* Firmware RF Write control.
+ * We can not execute the scheme in the initial step.
+ * Otherwise, RF-R/W will waste much time.
+ * This is only for site survey. */
+ /* 1. Read operation need not insert data. bit 0-11 */
+ /* 2. Write RF register address. bit 12-19 */
data |= ((offset&0xFF)<<12);
- // 3. Write RF path. bit 20-21
+ /* 3. Write RF path. bit 20-21 */
data |= ((eRFPath&0x3)<<20);
- // 4. Set RF read indicator. bit 22=0
- // 5. Trigger Fw to operate the command. bit 31
+ /* 4. Set RF read indicator. bit 22=0 */
+ /* 5. Trigger Fw to operate the command. bit 31 */
data |= 0x80000000;
- // 6. We can not execute read operation if bit 31 is 1.
+ /* 6. We can not execute read operation if bit 31 is 1. */
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
- // If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+ /* If FW can not finish RF-R/W for more than ?? times.
+ We must reset FW. */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -380,12 +392,13 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
break;
}
}
- // 7. Execute read operation.
+ /* 7. Execute read operation. */
write_nic_dword(dev, QPNR, data);
- // 8. Check if firmawre send back RF content.
+ /* 8. Check if firmware send back RF content. */
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
- // If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+ /* If FW can not finish RF-R/W for more than ?? times.
+ We must reset FW. */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -397,39 +410,44 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
return reg;
-} /* phy_FwRFSerialRead */
+}
/******************************************************************************
- *function: We support firmware to execute RF-R/W.
- * input: dev
- * output: none
- * return: none
- * notice:
- * ***************************************************************************/
+ * function: We support firmware to execute RF-R/W.
+ * input: net_device *dev
+ * RF90_RADIO_PATH_E eRFPath
+ * u32 offset
+ * u32 data
+ * output: none
+ * return: none
+ * notice:
+ ****************************************************************************/
static void phy_FwRFSerialWrite(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath, u32 offset, u32 data)
{
u8 time = 0;
u32 tmp;
- /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can
- not execute the scheme in the initial step. Otherwise, RF-R/W will waste
- much time. This is only for site survey. */
+ /* Firmware RF Write control.
+ * We can not execute the scheme in the initial step.
+ * Otherwise, RF-R/W will waste much time.
+ * This is only for site survey. */
- // 1. Set driver write bit and 12 bit data. bit 0-11
- // 2. Write RF register address. bit 12-19
+ /* 1. Set driver write bit and 12 bit data. bit 0-11 */
+ /* 2. Write RF register address. bit 12-19 */
data |= ((offset&0xFF)<<12);
- // 3. Write RF path. bit 20-21
+ /* 3. Write RF path. bit 20-21 */
data |= ((eRFPath&0x3)<<20);
- // 4. Set RF write indicator. bit 22=1
+ /* 4. Set RF write indicator. bit 22=1 */
data |= 0x400000;
- // 5. Trigger Fw to operate the command. bit 31=1
+ /* 5. Trigger Fw to operate the command. bit 31=1 */
data |= 0x80000000;
- // 6. Write operation. We can not write if bit 31 is 1.
+ /* 6. Write operation. We can not write if bit 31 is 1. */
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
- // If FW can not finish RF-R/W for more than ?? times. We must reset FW.
+ /* If FW can not finish RF-R/W for more than ?? times.
+ We must reset FW. */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -437,25 +455,25 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
break;
}
}
- // 7. No matter check bit. We always force the write. Because FW will
- // not accept the command.
+ /* 7. No matter check bit. We always force the write.
+ Because FW will not accept the command. */
write_nic_dword(dev, QPNR, data);
- /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware
+ /* According to test, we must delay 20us to wait firmware
to finish RF write operation. */
- /* 2008/01/17 MH We support delay in firmware side now. */
+ /* We support delay in firmware side now. */
-} /* phy_FwRFSerialWrite */
+}
/******************************************************************************
- *function: This function read BB parameters from Header file we gen,
- * and do register read/write
- * input: dev
- * output: none
- * return: none
- * notice: BB parameters may change all the time, so please make
- * sure it has been synced with the newest.
- * ***************************************************************************/
+ * function: This function reads BB parameters from header file we generate,
+ * and do register read/write
+ * input: net_device *dev
+ * output: none
+ * return: none
+ * notice: BB parameters may change all the time, so please make
+ * sure it has been synced with the newest.
+ *****************************************************************************/
void rtl8192_phy_configmac(struct net_device *dev)
{
u32 dwArrayLen = 0, i;
@@ -486,13 +504,14 @@ void rtl8192_phy_configmac(struct net_device *dev)
}
/******************************************************************************
- *function: This function does dirty work
- * input: dev
- * output: none
- * return: none
- * notice: BB parameters may change all the time, so please make
- * sure it has been synced with the newest.
- * ***************************************************************************/
+ * function: This function does dirty work
+ * input: net_device *dev
+ * u8 ConfigType
+ * output: none
+ * return: none
+ * notice: BB parameters may change all the time, so please make
+ * sure it has been synced with the newest.
+ *****************************************************************************/
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType)
{
@@ -523,113 +542,134 @@ void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType)
}
/******************************************************************************
- *function: This function initialize Register definition offset for Radio Path
- * A/B/C/D
- * input: net_device dev
- * output: none
- * return: none
- * notice: Initialization value here is constant and it should never be changed
- * ***************************************************************************/
+ * function: This function initializes Register definition offset for
+ * Radio Path A/B/C/D
+ * input: net_device *dev
+ * output: none
+ * return: none
+ * notice: Initialization value here is constant and it should never
+ * be changed
+ *****************************************************************************/
void rtl8192_InitBBRFRegDef(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
-// RF Interface Software Control
- priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
- priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
- priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
- priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
-
- // RF Interface Readback Value
- priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0
- priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
- priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
- priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
-
- // RF Interface Output (and Enable)
- priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
- priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
- priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868
- priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C
-
- // RF Interface (Output and) Enable
- priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
- priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
- priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
- priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
-
- //Addr of LSSI. Write RF register by driver
- priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
+ /* RF Interface Software Control */
+ /* 16 LSBs if read 32-bit from 0x870 */
+ priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW;
+ /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */
+ priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW;
+ /* 16 LSBs if read 32-bit from 0x874 */
+ priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;
+ /* 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) */
+ priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;
+
+ /* RF Interface Readback Value */
+ /* 16 LSBs if read 32-bit from 0x8E0 */
+ priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB;
+ /* 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) */
+ priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;
+ /* 16 LSBs if read 32-bit from 0x8E4 */
+ priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;
+ /* 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) */
+ priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;
+
+ /* RF Interface Output (and Enable) */
+ /* 16 LSBs if read 32-bit from 0x860 */
+ priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE;
+ /* 16 LSBs if read 32-bit from 0x864 */
+ priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE;
+ /* 16 LSBs if read 32-bit from 0x868 */
+ priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;
+ /* 16 LSBs if read 32-bit from 0x86C */
+ priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;
+
+ /* RF Interface (Output and) Enable */
+ /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */
+ priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE;
+ /* 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) */
+ priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE;
+ /* 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) */
+ priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;
+ /* 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) */
+ priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;
+
+ /* Addr of LSSI. Write RF register by driver */
+ priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter;
priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter;
- // RF parameter
- priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select
+ /* RF parameter */
+ /* BB Band Select */
+ priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter;
priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
- // Tx AGC Gain Stage (same for all path. Should we remove this?)
- priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
- priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
- priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
- priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
-
- // Tranceiver A~D HSSI Parameter-1
- priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1
- priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1
- priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1
- priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1
-
- // Tranceiver A~D HSSI Parameter-2
- priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2
- priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2
- priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2
- priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1
-
- // RF switch Control
- priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
+ /* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+ priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage;
+ priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage;
+ priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage;
+ priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage;
+
+ /* Tranceiver A~D HSSI Parameter-1 */
+ /* wire control parameter1 */
+ priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1;
+ priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1;
+ priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1;
+ priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1;
+
+ /* Tranceiver A~D HSSI Parameter-2 */
+ /* wire control parameter2 */
+ priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2;
+ priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2;
+ priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2;
+ priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2;
+
+ /* RF Switch Control */
+ /* TR/Ant switch control */
+ priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl;
priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
- // AGC control 1
+ /* AGC control 1 */
priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
- // AGC control 2
+ /* AGC control 2 */
priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
- // RX AFE control 1
+ /* RX AFE control 1 */
priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
- // RX AFE control 1
+ /* RX AFE control 1 */
priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
- // Tx AFE control 1
+ /* Tx AFE control 1 */
priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
- // Tx AFE control 2
+ /* Tx AFE control 2 */
priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
- // Tranceiver LSSI Readback
+ /* Tranceiver LSSI Readback */
priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
@@ -637,14 +677,16 @@ void rtl8192_InitBBRFRegDef(struct net_device *dev)
}
/******************************************************************************
- *function: This function is to write register and then readback to make sure whether BB and RF is OK
- * input: net_device dev
- * HW90_BLOCK_E CheckBlock
- * RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF
- * output: none
- * return: return whether BB and RF is ok(0:OK; 1:Fail)
- * notice: This function may be removed in the ASIC
- * ***************************************************************************/
+ * function: This function is to write register and then readback to make
+ * sure whether BB and RF is OK
+ * input: net_device *dev
+ * HW90_BLOCK_E CheckBlock
+ * RF90_RADIO_PATH_E eRFPath //only used when checkblock is
+ * //HW90_BLOCK_RF
+ * output: none
+ * return: return whether BB and RF is ok (0:OK, 1:Fail)
+ * notice: This function may be removed in the ASIC
+ ******************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
RF90_RADIO_PATH_E eRFPath)
{
@@ -652,7 +694,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
u32 i, CheckTimes = 4, dwRegRead = 0;
u32 WriteAddr[4];
u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
- // Initialize register address offset to be checked
+ /* Initialize register address offset to be checked */
WriteAddr[HW90_BLOCK_MAC] = 0x100;
WriteAddr[HW90_BLOCK_PHY0] = 0x900;
WriteAddr[HW90_BLOCK_PHY1] = 0x800;
@@ -660,9 +702,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock);
for (i = 0; i < CheckTimes; i++) {
- //
- // Write Data to register and readback
- //
+ /* Write data to register and readback */
switch (CheckBlock) {
case HW90_BLOCK_MAC:
RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
@@ -677,7 +717,8 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
case HW90_BLOCK_RF:
WriteData[i] &= 0xfff;
rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
- // TODO: we should not delay for such a long time. Ask SD3
+ /* TODO: we should not delay for such a long time.
+ Ask SD3 */
msleep(1);
dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits);
msleep(1);
@@ -689,9 +730,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
}
- //
- // Check whether readback data is correct
- //
+ /* Check whether readback data is correct */
if (dwRegRead != WriteData[i]) {
RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]);
ret = 1;
@@ -704,93 +743,95 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
/******************************************************************************
- *function: This function initialize BB&RF
- * input: net_device dev
- * output: none
- * return: none
- * notice: Initialization value may change all the time, so please make
- * sure it has been synced with the newest.
- * ***************************************************************************/
+ * function: This function initializes BB&RF
+ * input: net_device *dev
+ * output: none
+ * return: none
+ * notice: Initialization value may change all the time, so please make
+ * sure it has been synced with the newest.
+ ******************************************************************************/
void rtl8192_BB_Config_ParaFile(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 reg_u8 = 0, eCheckItem = 0, rtStatus = 0;
u32 reg_u32 = 0;
/**************************************
- //<1>Initialize BaseBand
- **************************************/
+ * <1> Initialize BaseBand
+ *************************************/
- /*--set BB Global Reset--*/
+ /* --set BB Global Reset-- */
read_nic_byte(dev, BB_GLOBAL_RESET, ®_u8);
write_nic_byte(dev, BB_GLOBAL_RESET, (reg_u8|BB_GLOBAL_RESET_BIT));
mdelay(50);
- /*---set BB reset Active---*/
+ /* ---set BB reset Active--- */
read_nic_dword(dev, CPU_GEN, ®_u32);
write_nic_dword(dev, CPU_GEN, (reg_u32&(~CPU_GEN_BB_RST)));
- /*----Ckeck FPGAPHY0 and PHY1 board is OK----*/
- // TODO: this function should be removed on ASIC , Emily 2007.2.2
+ /* ----Ckeck FPGAPHY0 and PHY1 board is OK---- */
+ /* TODO: this function should be removed on ASIC */
for (eCheckItem = (HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) {
- rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
+ rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); /* don't care RF path */
if (rtStatus != 0) {
RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
return;
}
}
- /*---- Set CCK and OFDM Block "OFF"----*/
+ /* ---- Set CCK and OFDM Block "OFF"---- */
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
- /*----BB Register Initilazation----*/
- //==m==>Set PHY REG From Header<==m==
+ /* ----BB Register Initilazation---- */
+ /* ==m==>Set PHY REG From Header<==m== */
rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG);
- /*----Set BB reset de-Active----*/
+ /* ----Set BB reset de-Active---- */
read_nic_dword(dev, CPU_GEN, ®_u32);
write_nic_dword(dev, CPU_GEN, (reg_u32|CPU_GEN_BB_RST));
- /*----BB AGC table Initialization----*/
- //==m==>Set PHY REG From Header<==m==
+ /* ----BB AGC table Initialization---- */
+ /* ==m==>Set PHY REG From Header<==m== */
rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB);
- /*----Enable XSTAL ----*/
+ /* ----Enable XSTAL ---- */
write_nic_byte_E(dev, 0x5e, 0x00);
if (priv->card_8192_version == (u8)VERSION_819xU_A) {
- //Antenna gain offset from B/C/D to A
+ /* Antenna gain offset from B/C/D to A */
reg_u32 = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]);
rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), reg_u32);
- //XSTALLCap
+ /* XSTALLCap */
reg_u32 = priv->CrystalCap & 0xf;
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, reg_u32);
}
- // Check if the CCK HighPower is turned ON.
- // This is used to calculate PWDB.
+ /* Check if the CCK HighPower is turned ON.
+ This is used to calculate PWDB. */
priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
return;
}
/******************************************************************************
- *function: This function initialize BB&RF
- * input: net_device dev
- * output: none
- * return: none
- * notice: Initialization value may change all the time, so please make
- * sure it has been synced with the newest.
- * ***************************************************************************/
+ * function: This function initializes BB&RF
+ * input: net_device *dev
+ * output: none
+ * return: none
+ * notice: Initialization value may change all the time, so please make
+ * sure it has been synced with the newest.
+ *****************************************************************************/
void rtl8192_BBConfig(struct net_device *dev)
{
rtl8192_InitBBRFRegDef(dev);
- //config BB&RF. As hardCode based initialization has not been well
- //implemented, so use file first.FIXME:should implement it for hardcode?
+ /* config BB&RF. As hardCode based initialization has not been well
+ * implemented, so use file first.
+ * FIXME: should implement it for hardcode? */
rtl8192_BB_Config_ParaFile(dev);
return;
}
/******************************************************************************
- *function: This function obtains the initialization value of Tx power Level offset
- * input: net_device dev
- * output: none
- * return: none
- * ***************************************************************************/
+ * function: This function obtains the initialization value of Tx power Level
+ * offset
+ * input: net_device *dev
+ * output: none
+ * return: none
+ *****************************************************************************/
void rtl8192_phy_getTxPower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -802,7 +843,7 @@ void rtl8192_phy_getTxPower(struct net_device *dev)
read_nic_dword(dev, rTxAGC_Mcs11_Mcs08, &priv->MCSTxPowerLevelOriginalOffset[4]);
read_nic_dword(dev, rTxAGC_Mcs15_Mcs12, &priv->MCSTxPowerLevelOriginalOffset[5]);
- // read rx initial gain
+ /* Read rx initial gain */
read_nic_byte(dev, rOFDM0_XAAGCCore1, &priv->DefaultInitialGain[0]);
read_nic_byte(dev, rOFDM0_XBAGCCore1, &priv->DefaultInitialGain[1]);
read_nic_byte(dev, rOFDM0_XCAGCCore1, &priv->DefaultInitialGain[2]);
@@ -811,25 +852,27 @@ void rtl8192_phy_getTxPower(struct net_device *dev)
priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
- // read framesync
+ /* Read framesync */
read_nic_byte(dev, rOFDM0_RxDetector3, &priv->framesync);
read_nic_byte(dev, rOFDM0_RxDetector2, &tmp);
priv->framesyncC34 = tmp;
RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
rOFDM0_RxDetector3, priv->framesync);
- // read SIFS (save the value read fome MACPHY_REG.txt)
+ /* Read SIFS (save the value read fome MACPHY_REG.txt) */
read_nic_word(dev, SIFS, &priv->SifsTime);
return;
}
/******************************************************************************
- *function: This function obtains the initialization value of Tx power Level offset
- * input: net_device dev
- * output: none
- * return: none
- * ***************************************************************************/
+ * function: This function sets the initialization value of Tx power Level
+ * offset
+ * input: net_device *dev
+ * u8 channel
+ * output: none
+ * return: none
+ ******************************************************************************/
void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -849,11 +892,11 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
}
/******************************************************************************
- *function: This function check Rf chip to do RF config
- * input: net_device dev
- * output: none
- * return: only 8256 is supported
- * ***************************************************************************/
+ * function: This function checks Rf chip to do RF config
+ * input: net_device *dev
+ * output: none
+ * return: only 8256 is supported
+ ******************************************************************************/
void rtl8192_phy_RFConfig(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -870,23 +913,25 @@ void rtl8192_phy_RFConfig(struct net_device *dev)
}
/******************************************************************************
- *function: This function update Initial gain
- * input: net_device dev
- * output: none
- * return: As Windows has not implemented this, wait for complement
- * ***************************************************************************/
+ * function: This function updates Initial gain
+ * input: net_device *dev
+ * output: none
+ * return: As Windows has not implemented this, wait for complement
+ ******************************************************************************/
void rtl8192_phy_updateInitGain(struct net_device *dev)
{
return;
}
/******************************************************************************
- *function: This function read RF parameters from general head file, and do RF 3-wire
- * input: net_device dev
- * output: none
- * return: return code show if RF configuration is successful(0:pass, 1:fail)
- * Note: Delay may be required for RF configuration
- * ***************************************************************************/
+ * function: This function read RF parameters from general head file,
+ * and do RF 3-wire
+ * input: net_device *dev
+ * RF90_RADIO_PATH_E eRFPath
+ * output: none
+ * return: return code show if RF configuration is successful(0:pass, 1:fail)
+ * notice: Delay may be required for RF configuration
+ *****************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
RF90_RADIO_PATH_E eRFPath)
{
@@ -951,13 +996,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
}
/******************************************************************************
- *function: This function set Tx Power of the channel
- * input: struct net_device *dev
- * u8 channel
- * output: none
- * return: none
- * Note:
- * ***************************************************************************/
+ * function: This function sets Tx Power of the channel
+ * input: net_device *dev
+ * u8 channel
+ * output: none
+ * return: none
+ * notice:
+ ******************************************************************************/
void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -987,13 +1032,13 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
}
/******************************************************************************
- *function: This function set RF state on or off
- * input: struct net_device *dev
- * RT_RF_POWER_STATE eRFPowerState //Power State to set
- * output: none
- * return: none
- * Note:
- * ***************************************************************************/
+ * function: This function sets RF state on or off
+ * input: net_device *dev
+ * RT_RF_POWER_STATE eRFPowerState //Power State to set
+ * output: none
+ * return: none
+ * notice:
+ *****************************************************************************/
bool rtl8192_SetRFPowerState(struct net_device *dev,
RT_RF_POWER_STATE eRFPowerState)
{
@@ -1012,19 +1057,19 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
case RF_8256:
switch (eRFPowerState) {
case eRfOn:
- //RF-A, RF-B
- //enable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
- //analog to digital on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
- //digital to analog on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
- //rx antenna on
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
- //rx antenna on
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
- //analog to digital part2 on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
+ /* RF-A, RF-B */
+ /* enable RF-Chip A/B */
+ rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); /* 0x860[4] */
+ /* analog to digital on */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3); /* 0x88c[9:8] */
+ /* digital to analog on */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); /* 0x880[4:3] */
+ /* rx antenna on */
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3); /* 0xc04[1:0] */
+ /* rx antenna on */
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3); /* 0xd04[1:0] */
+ /* analog to digital part2 on */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); /* 0x880[6:5] */
break;
@@ -1033,19 +1078,19 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
break;
case eRfOff:
- //RF-A, RF-B
- //disable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
- //analog to digital off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
- //digital to analog off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3]
- //rx antenna off
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0]
- //rx antenna off
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0]
- //analog to digital part2 off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
+ /* RF-A, RF-B */
+ /* disable RF-Chip A/B */
+ rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); /* 0x860[4] */
+ /* analog to digital off, for power save */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0); /* 0x88c[11:8] */
+ /* digital to analog off, for power save */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); /* 0x880[4:3] */
+ /* rx antenna off */
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0); /* 0xc04[3:0] */
+ /* rx antenna off */
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); /* 0xd04[3:0] */
+ /* analog to digital part2 off, for power save */
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); /* 0x880[6:5] */
break;
@@ -1061,36 +1106,32 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
}
#ifdef TO_DO_LIST
if (bResult) {
- // Update current RF state variable.
+ /* Update current RF state variable. */
pHalData->eRFPowerState = eRFPowerState;
switch (pHalData->RFChipID) {
case RF_8256:
switch (pHalData->eRFPowerState) {
case eRfOff:
- //
- //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
- //
+ /* If Rf off reason is from IPS, LED should blink with no link */
if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
else
- // Turn off LED if RF is not ON.
+ /* Turn off LED if RF is not ON. */
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
break;
case eRfOn:
- // Turn on RF we are still linked, which might happen when
- // we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
+ /* Turn on RF we are still linked, which might happen when we quickly turn off and on HW RF. */
if (pMgntInfo->bMediaConnect == TRUE)
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
else
- // Turn off LED if RF is not ON.
+ /* Turn off LED if RF is not ON. */
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
break;
default:
- // do nothing.
break;
- }// Switch RF state
+ }
break;
default:
@@ -1105,19 +1146,19 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
return bResult;
}
-/****************************************************************************************
- *function: This function set command table variable(struct SwChnlCmd).
- * input: SwChnlCmd* CmdTable //table to be set.
- * u32 CmdTableIdx //variable index in table to be set
- * u32 CmdTableSz //table size.
- * SwChnlCmdID CmdID //command ID to set.
- * u32 Para1
- * u32 Para2
- * u32 msDelay
- * output:
- * return: true if finished, false otherwise
- * Note:
- * ************************************************************************************/
+/******************************************************************************
+ * function: This function sets command table variable (struct SwChnlCmd).
+ * input: SwChnlCmd *CmdTable //table to be set
+ * u32 CmdTableIdx //variable index in table to be set
+ * u32 CmdTableSz //table size
+ * SwChnlCmdID CmdID //command ID to set
+ * u32 Para1
+ * u32 Para2
+ * u32 msDelay
+ * output:
+ * return: true if finished, false otherwise
+ * notice:
+ ******************************************************************************/
u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx,
u32 CmdTableSz, SwChnlCmdID CmdID, u32 Para1,
u32 Para2, u32 msDelay)
@@ -1143,16 +1184,17 @@ u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx,
return true;
}
/******************************************************************************
- *function: This function set channel step by step
- * input: struct net_device *dev
- * u8 channel
- * u8* stage //3 stages
- * u8* step //
- * u32* delay //whether need to delay
- * output: store new stage, step and delay for next step(combine with function above)
- * return: true if finished, false otherwise
- * Note: Wait for simpler function to replace it //wb
- * ***************************************************************************/
+ * function: This function sets channel step by step
+ * input: net_device *dev
+ * u8 channel
+ * u8 *stage //3 stages
+ * u8 *step
+ * u32 *delay //whether need to delay
+ * output: store new stage, step and delay for next step
+ * (combine with function above)
+ * return: true if finished, false otherwise
+ * notice: Wait for simpler function to replace it
+ *****************************************************************************/
u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
u8 *step, u32 *delay)
{
@@ -1169,25 +1211,27 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel);
if (!IsLegalChannel(priv->ieee80211, channel)) {
RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
- return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
+ /* return true to tell upper caller function this channel
+ setting is finished! Or it will in while loop. */
+ return true;
}
-//FIXME:need to check whether channel is legal or not here.WB
+/* FIXME: need to check whether channel is legal or not here */
- // <1> Fill up pre common command.
+ /* <1> Fill up pre common command. */
PreCommonCmdCnt = 0;
rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
CmdID_SetTxPowerLevel, 0, 0, 0);
rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
CmdID_End, 0, 0, 0);
- // <2> Fill up post common command.
+ /* <2> Fill up post common command. */
PostCommonCmdCnt = 0;
rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT,
CmdID_End, 0, 0, 0);
- // <3> Fill up RF dependent command.
+ /* <3> Fill up RF dependent command. */
RfDependCmdCnt = 0;
switch (priv->rf_chip) {
case RF_8225:
@@ -1202,7 +1246,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
break;
case RF_8256:
- // TEST!! This is not the table for 8256!!
+ /* TEST!! This is not the table for 8256!! */
if (!(channel >= 1 && channel <= 14)) {
RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel);
return true;
@@ -1249,7 +1293,8 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
switch (CurrentCmd->CmdID) {
case CmdID_SetTxPowerLevel:
- if (priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later!
+ if (priv->card_8192_version == (u8)VERSION_819xU_A)
+ /* consider it later! */
rtl8192_SetTxPowerLevel(dev, channel);
break;
case CmdID_WritePortUlong:
@@ -1279,13 +1324,13 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
}
/******************************************************************************
- *function: This function does actually set channel work
- * input: struct net_device *dev
- * u8 channel
- * output: none
- * return: noin
- * Note: We should not call this function directly
- * ***************************************************************************/
+ * function: This function does actually set channel work
+ * input: net_device *dev
+ * u8 channel
+ * output: none
+ * return: none
+ * notice: We should not call this function directly
+ *****************************************************************************/
void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1297,12 +1342,12 @@ void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
}
}
/******************************************************************************
- *function: Callback routine of the work item for switch channel.
- * input:
+ * function: Callback routine of the work item for switch channel.
+ * input: net_device *dev
*
- * output: none
- * return: noin
- * ***************************************************************************/
+ * output: none
+ * return: none
+ *****************************************************************************/
void rtl8192_SwChnl_WorkItem(struct net_device *dev)
{
@@ -1317,13 +1362,13 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
}
/******************************************************************************
- *function: This function scheduled actual work item to set channel
- * input: net_device dev
- * u8 channel //channel to set
- * output: none
- * return: return code show if workitem is scheduled(1:pass, 0:fail)
- * Note: Delay may be required for RF configuration
- * ***************************************************************************/
+ * function: This function scheduled actual work item to set channel
+ * input: net_device *dev
+ * u8 channel //channel to set
+ * output: none
+ * return: return code show if workitem is scheduled (1:pass, 0:fail)
+ * notice: Delay may be required for RF configuration
+ ******************************************************************************/
u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1333,7 +1378,7 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel)
if (priv->SwChnlInProgress)
return false;
- //--------------------------------------------
+ /* -------------------------------------------- */
switch (priv->ieee80211->mode) {
case WIRELESS_MODE_A:
case WIRELESS_MODE_N_5G:
@@ -1356,7 +1401,7 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel)
}
break;
}
- //--------------------------------------------
+ /* -------------------------------------------- */
priv->SwChnlInProgress = true;
if (channel == 0)
@@ -1374,17 +1419,14 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel)
}
-//
/******************************************************************************
- *function: Callback routine of the work item for set bandwidth mode.
- * input: struct net_device *dev
- * HT_CHANNEL_WIDTH Bandwidth //20M or 40M
- * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care
- * output: none
- * return: none
- * Note: I doubt whether SetBWModeInProgress flag is necessary as we can
- * test whether current work in the queue or not.//do I?
- * ***************************************************************************/
+ * function: Callback routine of the work item for set bandwidth mode.
+ * input: net_device *dev
+ * output: none
+ * return: none
+ * notice: I doubt whether SetBWModeInProgress flag is necessary as we can
+ * test whether current work in the queue or not.//do I?
+ *****************************************************************************/
void rtl8192_SetBWModeWorkItem(struct net_device *dev)
{
@@ -1400,19 +1442,19 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
return;
}
- //<1>Set MAC register
+ /* <1> Set MAC register */
read_nic_byte(dev, BW_OPMODE, ®BwOpMode);
switch (priv->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
- // 2007/02/07 Mark by Emily because we have not verify whether this register works
+ /* We have not verify whether this register works */
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
break;
case HT_CHANNEL_WIDTH_20_40:
regBwOpMode &= ~BW_OPMODE_20MHZ;
- // 2007/02/07 Mark by Emily because we have not verify whether this register works
+ /* We have not verify whether this register works */
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
break;
@@ -1421,15 +1463,14 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
break;
}
- //<2>Set PHY related register
+ /* <2> Set PHY related register */
switch (priv->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
- // Add by Vivi 20071119
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
- // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
+ /* Correct the tx power for CCK rate in 20M. */
priv->cck_present_attentuation =
priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
@@ -1451,7 +1492,6 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
break;
case HT_CHANNEL_WIDTH_20_40:
- // Add by Vivi 20071119
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
@@ -1482,9 +1522,10 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
break;
}
- //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
+ /* Skip over setting of J-mode in BB register here.
+ Default value is "None J mode". */
- //<3>Set RF related register
+ /* <3> Set RF related register */
switch (priv->rf_chip) {
case RF_8225:
#ifdef TO_DO_LIST
@@ -1497,11 +1538,9 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
break;
case RF_8258:
- // PHY_SetRF8258Bandwidth();
break;
case RF_PSEUDO_11N:
- // Do Nothing
break;
default:
@@ -1514,15 +1553,15 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
}
/******************************************************************************
- *function: This function schedules bandwidth switch work.
- * input: struct net_device *dev
- * HT_CHANNEL_WIDTH bandwidth //20M or 40M
- * HT_EXTCHNL_OFFSET offset //Upper, Lower, or Don't care
- * output: none
- * return: none
- * Note: I doubt whether SetBWModeInProgress flag is necessary as we can
- * test whether current work in the queue or not.//do I?
- * ***************************************************************************/
+ * function: This function schedules bandwidth switch work.
+ * input: struct net_deviceq *dev
+ * HT_CHANNEL_WIDTH bandwidth //20M or 40M
+ * HT_EXTCHNL_OFFSET offset //Upper, Lower, or Don't care
+ * output: none
+ * return: none
+ * notice: I doubt whether SetBWModeInProgress flag is necessary as we can
+ * test whether current work in the queue or not.//do I?
+ *****************************************************************************/
void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH bandwidth,
HT_EXTCHNL_OFFSET offset)
{
@@ -1574,7 +1613,8 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
initial_gain = SCAN_RX_INITIAL_GAIN;
bitmask = bMaskByte0;
if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
+ /* FW DIG OFF */
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);
priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bitmask);
priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bitmask);
priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bitmask);
@@ -1598,9 +1638,10 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
break;
case IG_Restore:
RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
- bitmask = 0x7f; //Bit0~ Bit6
+ bitmask = 0x7f; /* Bit0 ~ Bit6 */
if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
+ /* FW DIG OFF */
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bitmask, (u32)priv->initgain_backup.xaagccore1);
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bitmask, (u32)priv->initgain_backup.xbagccore1);
@@ -1624,7 +1665,8 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel);
if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
+ /* FW DIG ON */
+ rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);
break;
default:
RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
--
cgit v1.2.3