From 41f71e5e7dafb4608834d6e3be49b5568639c0c1 Mon Sep 17 00:00:00 2001 From: Stefan Popa Date: Thu, 13 Dec 2018 14:46:18 +0200 Subject: staging: iio: adc: ad7606: Use find_closest() macro When looking for the available scale or oversampling ratio, it is better to use the find_closest() macro. This simplifies the code and also does not require an exact value to be entered from the user space. Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/ad7606.c | 58 +++++++++++++++------------------------- 1 file changed, 22 insertions(+), 36 deletions(-) (limited to 'drivers/staging/iio') diff --git a/drivers/staging/iio/adc/ad7606.c b/drivers/staging/iio/adc/ad7606.c index 36ca75a9907b..d032590739e8 100644 --- a/drivers/staging/iio/adc/ad7606.c +++ b/drivers/staging/iio/adc/ad7606.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -30,8 +31,12 @@ * Scales are computed as 5000/32768 and 10000/32768 respectively, * so that when applied to the raw values they provide mV values */ -static const unsigned int scale_avail[2][2] = { - {0, 152588}, {0, 305176} +static const unsigned int scale_avail[2] = { + 152588, 305176 +}; + +static const unsigned int ad7606_oversampling_avail[7] = { + 1, 2, 4, 8, 16, 32, 64, }; static int ad7606_reset(struct ad7606_state *st) @@ -160,8 +165,8 @@ static int ad7606_read_raw(struct iio_dev *indio_dev, *val = (short)ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = scale_avail[st->range][0]; - *val2 = scale_avail[st->range][1]; + *val = 0; + *val2 = scale_avail[st->range]; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: *val = st->oversampling; @@ -177,8 +182,8 @@ static ssize_t in_voltage_scale_available_show(struct device *dev, int i, len = 0; for (i = 0; i < ARRAY_SIZE(scale_avail); i++) - len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", - scale_avail[i][0], scale_avail[i][1]); + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + scale_avail[i]); buf[len - 1] = '\n'; @@ -187,18 +192,6 @@ static ssize_t in_voltage_scale_available_show(struct device *dev, static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); -static int ad7606_oversampling_get_index(unsigned int val) -{ - unsigned char supported[] = {1, 2, 4, 8, 16, 32, 64}; - int i; - - for (i = 0; i < ARRAY_SIZE(supported); i++) - if (val == supported[i]) - return i; - - return -EINVAL; -} - static int ad7606_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, @@ -207,36 +200,29 @@ static int ad7606_write_raw(struct iio_dev *indio_dev, { struct ad7606_state *st = iio_priv(indio_dev); DECLARE_BITMAP(values, 3); - int ret, i; + int i; switch (mask) { case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; mutex_lock(&st->lock); - for (i = 0; i < ARRAY_SIZE(scale_avail); i++) - if (val2 == scale_avail[i][1]) { - gpiod_set_value(st->gpio_range, i); - st->range = i; - - ret = 0; - break; - } + i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail)); + gpiod_set_value(st->gpio_range, i); + st->range = i; mutex_unlock(&st->lock); - return ret; + return 0; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: if (val2) return -EINVAL; - ret = ad7606_oversampling_get_index(val); - if (ret < 0) - return ret; + i = find_closest(val, ad7606_oversampling_avail, + ARRAY_SIZE(ad7606_oversampling_avail)); - values[0] = ret; + values[0] = i; mutex_lock(&st->lock); - gpiod_set_array_value(3, st->gpio_os->desc, st->gpio_os->info, - values); - st->oversampling = val; + gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + st->gpio_os->info, values); + st->oversampling = ad7606_oversampling_avail[i]; mutex_unlock(&st->lock); return 0; -- cgit v1.2.3