From f8d939e411f57a5facdfba66be2404f5ed238e30 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 17 Oct 2013 12:06:34 +0100 Subject: staging: comedi: rtd520: use normal bitfield functions The `unsigned char chan_is_bipolar[]` member of `struct rtd_private` is used with some macros as a packed array of 1-bit values that indicate whether the corresponding entries in the hardware's "channel-gain" table have been set to a bipolar (1) or unipolar (0) range, as the raw samples from the hardware need to be cooked differently in each case. Replace the declaration of the member with a standard Linux bitfield using `DECLARE_BITFIELD()`, and replace the home-grown macros used access the bitfield with the standard Linux non-atomic bitop functions, `__set_bit()`, `__clear_bit()` and `test_bit()`. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/rtd520.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers/staging/comedi') diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 0ae2d6175471..44c8712ed9e0 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -394,11 +394,8 @@ struct rtd_private { long ai_count; /* total transfer size (samples) */ int xfer_count; /* # to transfer data. 0->1/2FIFO */ int flags; /* flag event modes */ - - unsigned char chan_is_bipolar[RTD_MAX_CHANLIST / 8]; /* bit array */ - + DECLARE_BITMAP(chan_is_bipolar, RTD_MAX_CHANLIST); unsigned int ao_readback[2]; - unsigned fifosz; }; @@ -407,14 +404,6 @@ struct rtd_private { #define DMA0_ACTIVE 0x02 /* DMA0 is active */ #define DMA1_ACTIVE 0x04 /* DMA1 is active */ -/* Macros for accessing channel list bit array */ -#define CHAN_ARRAY_TEST(array, index) \ - (((array)[(index)/8] >> ((index) & 0x7)) & 0x1) -#define CHAN_ARRAY_SET(array, index) \ - (((array)[(index)/8] |= 1 << ((index) & 0x7))) -#define CHAN_ARRAY_CLEAR(array, index) \ - (((array)[(index)/8] &= ~(1 << ((index) & 0x7)))) - /* Given a desired period and the clock period (both in ns), return the proper counter value (divider-1). @@ -478,17 +467,17 @@ static unsigned short rtd_convert_chan_gain(struct comedi_device *dev, /* +-5 range */ r |= 0x000; r |= (range & 0x7) << 4; - CHAN_ARRAY_SET(devpriv->chan_is_bipolar, index); + __set_bit(index, devpriv->chan_is_bipolar); } else if (range < board->range_uni10) { /* +-10 range */ r |= 0x100; r |= ((range - board->range_bip10) & 0x7) << 4; - CHAN_ARRAY_SET(devpriv->chan_is_bipolar, index); + __set_bit(index, devpriv->chan_is_bipolar); } else { /* +10 range */ r |= 0x200; r |= ((range - board->range_uni10) & 0x7) << 4; - CHAN_ARRAY_CLEAR(devpriv->chan_is_bipolar, index); + __clear_bit(index, devpriv->chan_is_bipolar); } switch (aref) { @@ -619,7 +608,7 @@ static int rtd_ai_rinsn(struct comedi_device *dev, d = readw(devpriv->las1 + LAS1_ADC_FIFO); /*printk ("rtd520: Got 0x%x after %d usec\n", d, ii+1); */ d = d >> 3; /* low 3 bits are marker lines */ - if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar, 0)) + if (test_bit(0, devpriv->chan_is_bipolar)) /* convert to comedi unsigned data */ d = comedi_offset_munge(s, d); data[n] = d & s->maxdata; @@ -651,8 +640,7 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s, d = readw(devpriv->las1 + LAS1_ADC_FIFO); d = d >> 3; /* low 3 bits are marker lines */ - if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar, - s->async->cur_chan)) + if (test_bit(s->async->cur_chan, devpriv->chan_is_bipolar)) /* convert to comedi unsigned data */ d = comedi_offset_munge(s, d); d &= s->maxdata; @@ -681,8 +669,7 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s) } d = d >> 3; /* low 3 bits are marker lines */ - if (CHAN_ARRAY_TEST(devpriv->chan_is_bipolar, - s->async->cur_chan)) + if (test_bit(s->async->cur_chan, devpriv->chan_is_bipolar)) /* convert to comedi unsigned data */ d = comedi_offset_munge(s, d); d &= s->maxdata; -- cgit v1.2.3