From 7188a6f0eee3f1fae5d826cfc6d569657ff950ec Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Sat, 30 Mar 2019 09:30:58 +0000 Subject: spi: bcm2835aux: unifying code between polling and interrupt driven code Sharing more code between polling and interrupt-driven mode. Signed-off-by: Martin Sperl Acked-by: Stefan Wahren Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835aux.c | 51 ++++++++++++++++---------------------------- 1 file changed, 18 insertions(+), 33 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index f7e054848ca5..41366d0a16af 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -178,23 +178,13 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs) BCM2835_AUX_SPI_CNTL0_CLEARFIFO); } -static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs) { - struct spi_master *master = dev_id; - struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - irqreturn_t ret = IRQ_NONE; - - /* IRQ may be shared, so return if our interrupts are disabled */ - if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & - (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) - return ret; - /* check if we have data to read */ while (bs->rx_len && (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_RX_EMPTY))) { bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; } /* check if we have data to write */ @@ -203,7 +193,6 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_TX_FULL))) { bcm2835aux_wr_fifo(bs); - ret = IRQ_HANDLED; } /* and check if we have reached "done" */ @@ -211,8 +200,21 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_BUSY))) { bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; } +} + +static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct bcm2835aux_spi *bs = spi_master_get_devdata(master); + + /* IRQ may be shared, so return if our interrupts are disabled */ + if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & + (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) + return IRQ_NONE; + + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); if (!bs->tx_len) { /* disable tx fifo empty interrupt */ @@ -226,8 +228,7 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) complete(&master->xfer_completion); } - /* and return */ - return ret; + return IRQ_HANDLED; } static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master, @@ -273,7 +274,6 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); unsigned long timeout; - u32 stat; /* configure spi */ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]); @@ -284,24 +284,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, /* loop until finished the transfer */ while (bs->rx_len) { - /* read status */ - stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT); - - /* fill in tx fifo with remaining data */ - if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) { - bcm2835aux_wr_fifo(bs); - continue; - } - /* read data from fifo for both cases */ - if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) { - bcm2835aux_rd_fifo(bs); - continue; - } - if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) { - bcm2835aux_rd_fifo(bs); - continue; - } + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); /* there is still data pending to read check the timeout */ if (bs->rx_len && time_after(jiffies, timeout)) { -- cgit v1.2.3