From 44af7927316e83eb8865933f7c836dcc85f8eb74 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 9 Oct 2015 15:45:55 +0100 Subject: spi: Map SPI OF client IRQ at probe time Currently the IRQs for SPI client devices, registered via device-tree, are mapped when the client devices are registered. If the corresponding irq-chip has not been probed yet, then the probing of the client device will fail and will not be retried. Resolve this by mapping the IRQ at probe time and allow the probe to be deferred if the IRQ is not yet available. If of_irq_get() returns an error that is not -EPROBE_DEFER, then assume that the SPI client does not have an IRQ and set the IRQ number to zero (which is equivalent to irq_of_parse_and_map()). This is based on some inputs from Thierry Reding . Cc: Thierry Reding Cc: Tomeu Vizoso Signed-off-by: Jon Hunter Signed-off-by: Mark Brown --- drivers/spi/spi.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 3abb3903f2ad..40c9afac047f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -270,15 +270,24 @@ EXPORT_SYMBOL_GPL(spi_bus_type); static int spi_drv_probe(struct device *dev) { const struct spi_driver *sdrv = to_spi_driver(dev->driver); + struct spi_device *spi = to_spi_device(dev); int ret; ret = of_clk_set_defaults(dev->of_node, false); if (ret) return ret; + if (dev->of_node) { + spi->irq = of_irq_get(dev->of_node, 0); + if (spi->irq == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (spi->irq < 0) + spi->irq = 0; + } + ret = dev_pm_domain_attach(dev, true); if (ret != -EPROBE_DEFER) { - ret = sdrv->probe(to_spi_device(dev)); + ret = sdrv->probe(spi); if (ret) dev_pm_domain_detach(dev, true); } @@ -1433,9 +1442,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc) } spi->max_speed_hz = value; - /* IRQ */ - spi->irq = irq_of_parse_and_map(nc, 0); - /* Store a pointer to the node in the device structure */ of_node_get(nc); spi->dev.of_node = nc; -- cgit v1.2.3 From 5ab8d262122bc951b308e51cdcc55bc67b1f5fdb Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 14 Oct 2015 22:43:07 +0300 Subject: spi: core: propagate return code of __spi_validate_bits_per_word() Propagate the actual return code of __spi_validate_bits_per_word() in spi_setup(). Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 40c9afac047f..64c1aedde481 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1956,7 +1956,7 @@ static int __spi_validate_bits_per_word(struct spi_master *master, u8 bits_per_w int spi_setup(struct spi_device *spi) { unsigned bad_bits, ugly_bits; - int status = 0; + int status; /* check mode to prevent that DUAL and QUAD set at the same time */ @@ -1993,8 +1993,9 @@ int spi_setup(struct spi_device *spi) if (!spi->bits_per_word) spi->bits_per_word = 8; - if (__spi_validate_bits_per_word(spi->master, spi->bits_per_word)) - return -EINVAL; + status = __spi_validate_bits_per_word(spi->master, spi->bits_per_word); + if (status) + return status; if (!spi->max_speed_hz) spi->max_speed_hz = spi->master->max_speed_hz; -- cgit v1.2.3 From 243f07be2423efe0b17e8ffafc9a36dad50406d3 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 20 Oct 2015 12:28:29 +0300 Subject: spi: core: use gpio_is_valid() helper Check if GPIO pin is valid by API helper function. Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 64c1aedde481..9136f30a9fbd 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -606,7 +606,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable) if (spi->mode & SPI_CS_HIGH) enable = !enable; - if (spi->cs_gpio >= 0) + if (gpio_is_valid(spi->cs_gpio)) gpio_set_value(spi->cs_gpio, !enable); else if (spi->master->set_cs) spi->master->set_cs(spi, !enable); -- cgit v1.2.3