From 2df201e0067d84db5955d07cc0d7ccc3b7295aef Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 16 Jan 2019 09:21:07 +0100 Subject: spi: Support high CS when using descriptors All controllers using GPIO descriptors can by definition support high CS connections, so just enforce this when registering an SPI controller. This fixes a regression where controllers were missing SPI_CS_HIGH, the drivers would fail like this: spi spi0.0: setup: unsupported mode bits 4 cdns-spi fd0b0000.spi: can't setup spi0.0, status -22 This is because as using descriptors moves the CS inversion logic over to gpiolib, all such controllers are registered with CS active high. Cc: Jan Kotas Reported-by: Jan Kotas Tested-by: Jan Kotas Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 13f447a67d67..0e0f2c62973c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2279,6 +2279,11 @@ int spi_register_controller(struct spi_controller *ctlr) status = spi_get_gpio_descs(ctlr); if (status) return status; + /* + * A controller using GPIO descriptors always + * supports SPI_CS_HIGH if need be. + */ + ctlr->mode_bits |= SPI_CS_HIGH; } else { /* Legacy code path for GPIOs from DT */ status = of_spi_register_master(ctlr); -- cgit v1.2.3