From 793c7f9212fdb7bea5e017427e750afa11217c29 Mon Sep 17 00:00:00 2001 From: Knut Wohlrab Date: Tue, 15 Mar 2016 14:24:36 +0100 Subject: spi: imx: only do necessary changes to ECSPIx_CONFIGREG If the SPI chip select (CS) for a dedicated channel is done manually by the used higher device driver, the CS may be active while writing to ECSPIx_CONFIGREG. To prevent unwanted clock edges when selecting the clock mode, only do the necessary changes to the i.MX SPI configuration register and leave not selected channels untouched. To prevent unwanted clock edges on first use, an empty dummy transmission shall be done by the initialization procedure of the device driver of this channel. This will set the clock mode to the correct state. Signed-off-by: Knut Wohlrab Signed-off-by: Dirk Behme Acked-by: Sascha Hauer Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/spi/spi-imx.c') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index e7a19be87c38..b79d70d6dabf 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -333,8 +333,9 @@ static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx) static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; + u32 ctrl = MX51_ECSPI_CTRL_ENABLE; u32 clk = config->speed_hz, delay, reg; + u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); /* * The hardware seems to have a race condition when changing modes. The @@ -358,13 +359,20 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, if (config->mode & SPI_CPHA) cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs); + else + cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs); if (config->mode & SPI_CPOL) { cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs); cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs); + } else { + cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs); + cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs); } if (config->mode & SPI_CS_HIGH) cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs); + else + cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs); if (spi_imx->usedma) ctrl |= MX51_ECSPI_CTRL_SMC; -- cgit v1.2.3 From cd8dd41a33264a4602539711f76670c2a1f4d007 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 17 Mar 2016 09:21:50 +0100 Subject: spi: imx: Fix possible NULL pointer deref transfer could be NULL in spi_imx_can_dma() when it's called from spi_imx_setupxfer() with a NULL transfer. Test for a NULL pointer before dereferencing it. Signed-off-by: Sascha Hauer Cc: Dan Carpenter Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/spi/spi-imx.c') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index b79d70d6dabf..50769078e72e 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -211,11 +211,15 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - unsigned int bpw = transfer->bits_per_word; + unsigned int bpw; if (!master->dma_rx) return false; + if (!transfer) + return false; + + bpw = transfer->bits_per_word; if (!bpw) bpw = spi->bits_per_word; -- cgit v1.2.3