From 0b2a2e5b7747f1f63bd86ca22b5c6097da5b2137 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 12 Jun 2008 08:05:09 -0500 Subject: cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart.h | 3 - drivers/serial/cpm_uart/cpm_uart_core.c | 371 +------------------------------- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 168 --------------- drivers/serial/cpm_uart/cpm_uart_cpm1.h | 10 - drivers/serial/cpm_uart/cpm_uart_cpm2.c | 277 ------------------------ drivers/serial/cpm_uart/cpm_uart_cpm2.h | 10 - 6 files changed, 1 insertion(+), 838 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 3d07bec06fad..5c76e0ae0582 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -84,9 +84,6 @@ struct uart_cpm_port { u32 command; }; -#ifndef CONFIG_PPC_CPM_NEW_BINDING -extern int cpm_uart_port_map[UART_NR]; -#endif extern int cpm_uart_nr; extern struct uart_cpm_port cpm_uart_ports[UART_NR]; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index b0104caefa1f..43f58dc69fc9 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -49,10 +50,6 @@ #include #include -#ifdef CONFIG_PPC_CPM_NEW_BINDING -#include -#endif - #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif @@ -72,59 +69,6 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo); /**************************************************************/ -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* Track which ports are configured as uarts */ -int cpm_uart_port_map[UART_NR]; -/* How many ports did we config as uarts */ -int cpm_uart_nr; - -/* Place-holder for board-specific stuff */ -struct platform_device* __attribute__ ((weak)) __init -early_uart_get_pdev(int index) -{ - return NULL; -} - - -static void cpm_uart_count(void) -{ - cpm_uart_nr = 0; -#ifdef CONFIG_SERIAL_CPM_SMC1 - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; -#endif -#ifdef CONFIG_SERIAL_CPM_SMC2 - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; -#endif -#ifdef CONFIG_SERIAL_CPM_SCC1 - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; -#endif -#ifdef CONFIG_SERIAL_CPM_SCC2 - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; -#endif -#ifdef CONFIG_SERIAL_CPM_SCC3 - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; -#endif -#ifdef CONFIG_SERIAL_CPM_SCC4 - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; -#endif -} - -/* Get UART number by its id */ -static int cpm_uart_id2nr(int id) -{ - int i; - if (id < UART_NR) { - for (i=0; idev.platform_data; - int idx; /* It is UART_SMCx or UART_SCCx index */ - struct uart_cpm_port *pinfo; - int line; - u32 mem, pram; - - idx = pdata->fs_no = fs_uart_get_id(pdata); - - line = cpm_uart_id2nr(idx); - if(line < 0) { - printk(KERN_ERR"%s(): port %d is not registered", __func__, idx); - return -EINVAL; - } - - pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; - - pinfo->brg = pdata->brg; - - if (!is_con) { - pinfo->port.line = line; - pinfo->port.flags = UPF_BOOT_AUTOCONF; - } - - if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"))) - return -EINVAL; - mem = (u32)ioremap(r->start, r->end - r->start + 1); - - if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"))) - return -EINVAL; - pram = (u32)ioremap(r->start, r->end - r->start + 1); - - if(idx > fsid_smc2_uart) { - pinfo->sccp = (scc_t *)mem; - pinfo->sccup = (scc_uart_t *)pram; - } else { - pinfo->smcp = (smc_t *)mem; - pinfo->smcup = (smc_uart_t *)pram; - } - pinfo->tx_nrfifos = pdata->tx_num_fifo; - pinfo->tx_fifosize = pdata->tx_buf_size; - - pinfo->rx_nrfifos = pdata->rx_num_fifo; - pinfo->rx_fifosize = pdata->rx_buf_size; - - pinfo->port.uartclk = pdata->uart_clk; - pinfo->port.mapbase = (unsigned long)mem; - pinfo->port.irq = platform_get_irq(pdev, 0); - - return 0; -} -#endif - #ifdef CONFIG_SERIAL_CPM_CONSOLE /* * Print a string to the serial port trying not to disturb @@ -1169,12 +965,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) static void cpm_uart_console_write(struct console *co, const char *s, u_int count) { -#ifdef CONFIG_PPC_CPM_NEW_BINDING struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; -#else - struct uart_cpm_port *pinfo = - &cpm_uart_ports[cpm_uart_port_map[co->index]]; -#endif unsigned int i; cbd_t __iomem *bdp, *bdbase; unsigned char *cp; @@ -1252,7 +1043,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) struct uart_cpm_port *pinfo; struct uart_port *port; -#ifdef CONFIG_PPC_CPM_NEW_BINDING struct device_node *np = NULL; int i = 0; @@ -1284,35 +1074,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options) if (ret) return ret; -#else - - struct fs_uart_platform_info *pdata; - struct platform_device* pdev = early_uart_get_pdev(co->index); - - if (!pdev) { - pr_info("cpm_uart: console: compat mode\n"); - /* compatibility - will be cleaned up */ - cpm_uart_init_portdesc(); - } - - port = - (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]]; - pinfo = (struct uart_cpm_port *)port; - if (!pdev) { - if (pinfo->set_lineif) - pinfo->set_lineif(pinfo); - } else { - pdata = pdev->dev.platform_data; - if (pdata) - if (pdata->init_ioports) - pdata->init_ioports(pdata); - - cpm_uart_drv_get_platform_data(pdev, 1); - } - - pinfo->flags |= FLAG_CONSOLE; -#endif - if (options) { uart_parse_options(options, &baud, &parity, &bits, &flow); } else { @@ -1386,7 +1147,6 @@ static struct uart_driver cpm_reg = { .nr = UART_NR, }; -#ifdef CONFIG_PPC_CPM_NEW_BINDING static int probe_index; static int __devinit cpm_uart_probe(struct of_device *ofdev, @@ -1457,135 +1217,6 @@ static void __exit cpm_uart_exit(void) of_unregister_platform_driver(&cpm_uart_driver); uart_unregister_driver(&cpm_reg); } -#else -static int cpm_uart_drv_probe(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fs_uart_platform_info *pdata; - int ret = -ENODEV; - - if(!pdev) { - printk(KERN_ERR"CPM UART: platform data missing!\n"); - return ret; - } - - pdata = pdev->dev.platform_data; - - if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) - return ret; - - pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); - - if (pdata->init_ioports) - pdata->init_ioports(pdata); - - ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); - - return ret; -} - -static int cpm_uart_drv_remove(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fs_uart_platform_info *pdata = pdev->dev.platform_data; - - pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n", - cpm_uart_id2nr(pdata->fs_no)); - - uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); - return 0; -} - -static struct device_driver cpm_smc_uart_driver = { - .name = "fsl-cpm-smc:uart", - .bus = &platform_bus_type, - .probe = cpm_uart_drv_probe, - .remove = cpm_uart_drv_remove, -}; - -static struct device_driver cpm_scc_uart_driver = { - .name = "fsl-cpm-scc:uart", - .bus = &platform_bus_type, - .probe = cpm_uart_drv_probe, - .remove = cpm_uart_drv_remove, -}; - -/* - This is supposed to match uart devices on platform bus, - */ -static int match_is_uart (struct device* dev, void* data) -{ - struct platform_device* pdev = container_of(dev, struct platform_device, dev); - int ret = 0; - /* this was setfunc as uart */ - if(strstr(pdev->name,":uart")) { - ret = 1; - } - return ret; -} - - -static int cpm_uart_init(void) { - - int ret; - int i; - struct device *dev; - printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n"); - - /* lookup the bus for uart devices */ - dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart); - - /* There are devices on the bus - all should be OK */ - if (dev) { - cpm_uart_count(); - cpm_reg.nr = cpm_uart_nr; - - if (!(ret = uart_register_driver(&cpm_reg))) { - if ((ret = driver_register(&cpm_smc_uart_driver))) { - uart_unregister_driver(&cpm_reg); - return ret; - } - if ((ret = driver_register(&cpm_scc_uart_driver))) { - driver_unregister(&cpm_scc_uart_driver); - uart_unregister_driver(&cpm_reg); - } - } - } else { - /* No capable platform devices found - falling back to legacy mode */ - pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n"); - pr_info( - "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n"); - - /* Don't run this again, if the console driver did it already */ - if (cpm_uart_nr == 0) - cpm_uart_init_portdesc(); - - cpm_reg.nr = cpm_uart_nr; - ret = uart_register_driver(&cpm_reg); - - if (ret) - return ret; - - for (i = 0; i < cpm_uart_nr; i++) { - int con = cpm_uart_port_map[i]; - cpm_uart_ports[con].port.line = i; - cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; - if (cpm_uart_ports[con].set_lineif) - cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]); - uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); - } - - } - return ret; -} - -static void __exit cpm_uart_exit(void) -{ - driver_unregister(&cpm_scc_uart_driver); - driver_unregister(&cpm_smc_uart_driver); - uart_unregister_driver(&cpm_reg); -} -#endif module_init(cpm_uart_init); module_exit(cpm_uart_exit); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index bec0c974cf54..0f0aff06c596 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -51,7 +51,6 @@ /**************************************************************/ -#ifdef CONFIG_PPC_CPM_NEW_BINDING void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { cpm_command(port->command, cmd); @@ -68,75 +67,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) iounmap(pram); } -#else -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - ushort val; - int line = port - cpm_uart_ports; - volatile cpm8xx_t *cp = cpmp; - - switch (line) { - case UART_SMC1: - val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG; - break; - case UART_SMC2: - val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG; - break; - case UART_SCC1: - val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG; - break; - case UART_SCC2: - val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG; - break; - case UART_SCC3: - val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG; - break; - case UART_SCC4: - val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG; - break; - default: - return; - - } - cp->cp_cpcr = val; - while (cp->cp_cpcr & CPM_CR_FLG) ; -} - -void smc1_lineif(struct uart_cpm_port *pinfo) -{ - pinfo->brg = 1; -} - -void smc2_lineif(struct uart_cpm_port *pinfo) -{ - pinfo->brg = 2; -} - -void scc1_lineif(struct uart_cpm_port *pinfo) -{ - /* XXX SCC1: insert port configuration here */ - pinfo->brg = 1; -} - -void scc2_lineif(struct uart_cpm_port *pinfo) -{ - /* XXX SCC2: insert port configuration here */ - pinfo->brg = 2; -} - -void scc3_lineif(struct uart_cpm_port *pinfo) -{ - /* XXX SCC3: insert port configuration here */ - pinfo->brg = 3; -} - -void scc4_lineif(struct uart_cpm_port *pinfo) -{ - /* XXX SCC4: insert port configuration here */ - pinfo->brg = 4; -} -#endif - /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and * receive buffer descriptors from dual port ram, and a character @@ -205,101 +135,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) cpm_dpfree(pinfo->dp_addr); } - -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* Setup any dynamic params in the uart desc */ -int cpm_uart_init_portdesc(void) -{ - pr_debug("CPM uart[-]:init portdesc\n"); - - cpm_uart_nr = 0; -#ifdef CONFIG_SERIAL_CPM_SMC1 - cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0]; -/* - * Is SMC1 being relocated? - */ -# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH - cpm_uart_ports[UART_SMC1].smcup = - (smc_uart_t *) & cpmp->cp_dparam[0x3C0]; -# else - cpm_uart_ports[UART_SMC1].smcup = - (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1]; -# endif - cpm_uart_ports[UART_SMC1].port.mapbase = - (unsigned long)&cpmp->cp_smc[0]; - cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1]; - cpm_uart_ports[UART_SMC2].smcup = - (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2]; - cpm_uart_ports[UART_SMC2].port.mapbase = - (unsigned long)&cpmp->cp_smc[1]; - cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC1 - cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0]; - cpm_uart_ports[UART_SCC1].sccup = - (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1]; - cpm_uart_ports[UART_SCC1].port.mapbase = - (unsigned long)&cpmp->cp_scc[0]; - cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC2 - cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1]; - cpm_uart_ports[UART_SCC2].sccup = - (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2]; - cpm_uart_ports[UART_SCC2].port.mapbase = - (unsigned long)&cpmp->cp_scc[1]; - cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC3 - cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2]; - cpm_uart_ports[UART_SCC3].sccup = - (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3]; - cpm_uart_ports[UART_SCC3].port.mapbase = - (unsigned long)&cpmp->cp_scc[2]; - cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC4 - cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3]; - cpm_uart_ports[UART_SCC4].sccup = - (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4]; - cpm_uart_ports[UART_SCC4].port.mapbase = - (unsigned long)&cpmp->cp_scc[3]; - cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; -#endif - return 0; -} -#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index b8056980d94f..10eecd6af6d4 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -12,16 +12,6 @@ #include -/* defines for IRQs */ -#ifndef CONFIG_PPC_CPM_NEW_BINDING -#define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2) -#define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#endif - static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index e53524c6463c..b8db4d3eed36 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -41,9 +41,7 @@ #include #include #include -#ifdef CONFIG_PPC_CPM_NEW_BINDING #include -#endif #include #include @@ -52,7 +50,6 @@ /**************************************************************/ -#ifdef CONFIG_PPC_CPM_NEW_BINDING void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { cpm_command(port->command, cmd); @@ -106,172 +103,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) iounmap(pram); } -#else -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - ulong val; - int line = port - cpm_uart_ports; - volatile cpm_cpm2_t *cp = cpm2_map(im_cpm); - - - switch (line) { - case UART_SMC1: - val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - case UART_SMC2: - val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - case UART_SCC1: - val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - case UART_SCC2: - val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - case UART_SCC3: - val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - case UART_SCC4: - val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0, - cmd) | CPM_CR_FLG; - break; - default: - return; - - } - cp->cp_cpcr = val; - while (cp->cp_cpcr & CPM_CR_FLG) ; - - cpm2_unmap(cp); -} - -void smc1_lineif(struct uart_cpm_port *pinfo) -{ - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); - - /* SMC1 is only on port D */ - io->iop_ppard |= 0x00c00000; - io->iop_pdird |= 0x00400000; - io->iop_pdird &= ~0x00800000; - io->iop_psord &= ~0x00c00000; - - /* Wire BRG1 to SMC1 */ - cpmux->cmx_smr &= 0x0f; - pinfo->brg = 1; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} - -void smc2_lineif(struct uart_cpm_port *pinfo) -{ - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); - - /* SMC2 is only on port A */ - io->iop_ppara |= 0x00c00000; - io->iop_pdira |= 0x00400000; - io->iop_pdira &= ~0x00800000; - io->iop_psora &= ~0x00c00000; - - /* Wire BRG2 to SMC2 */ - cpmux->cmx_smr &= 0xf0; - pinfo->brg = 2; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} - -void scc1_lineif(struct uart_cpm_port *pinfo) -{ - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); - - /* Use Port D for SCC1 instead of other functions. */ - io->iop_ppard |= 0x00000003; - io->iop_psord &= ~0x00000001; /* Rx */ - io->iop_psord |= 0x00000002; /* Tx */ - io->iop_pdird &= ~0x00000001; /* Rx */ - io->iop_pdird |= 0x00000002; /* Tx */ - - /* Wire BRG1 to SCC1 */ - cpmux->cmx_scr &= 0x00ffffff; - cpmux->cmx_scr |= 0x00000000; - pinfo->brg = 1; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} - -void scc2_lineif(struct uart_cpm_port *pinfo) -{ - /* - * STx GP3 uses the SCC2 secondary option pin assignment - * which this driver doesn't account for in the static - * pin assignments. This kind of board specific info - * really has to get out of the driver so boards can - * be supported in a sane fashion. - */ - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); -#ifndef CONFIG_STX_GP3 - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - - io->iop_pparb |= 0x008b0000; - io->iop_pdirb |= 0x00880000; - io->iop_psorb |= 0x00880000; - io->iop_pdirb &= ~0x00030000; - io->iop_psorb &= ~0x00030000; -#endif - cpmux->cmx_scr &= 0xff00ffff; - cpmux->cmx_scr |= 0x00090000; - pinfo->brg = 2; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} - -void scc3_lineif(struct uart_cpm_port *pinfo) -{ - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); - - io->iop_pparb |= 0x008b0000; - io->iop_pdirb |= 0x00880000; - io->iop_psorb |= 0x00880000; - io->iop_pdirb &= ~0x00030000; - io->iop_psorb &= ~0x00030000; - cpmux->cmx_scr &= 0xffff00ff; - cpmux->cmx_scr |= 0x00001200; - pinfo->brg = 3; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} - -void scc4_lineif(struct uart_cpm_port *pinfo) -{ - volatile iop_cpm2_t *io = cpm2_map(im_ioport); - volatile cpmux_t *cpmux = cpm2_map(im_cpmux); - - io->iop_ppard |= 0x00000600; - io->iop_psord &= ~0x00000600; /* Tx/Rx */ - io->iop_pdird &= ~0x00000200; /* Rx */ - io->iop_pdird |= 0x00000400; /* Tx */ - - cpmux->cmx_scr &= 0xffffff00; - cpmux->cmx_scr |= 0x0000001b; - pinfo->brg = 4; - - cpm2_unmap(cpmux); - cpm2_unmap(io); -} -#endif - /* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and * receive buffer descriptors from dual port ram, and a character @@ -340,111 +171,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) cpm_dpfree(pinfo->dp_addr); } - -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* Setup any dynamic params in the uart desc */ -int cpm_uart_init_portdesc(void) -{ -#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2) - u16 *addr; -#endif - pr_debug("CPM uart[-]:init portdesc\n"); - - cpm_uart_nr = 0; -#ifdef CONFIG_SERIAL_CPM_SMC1 - cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]); - cpm_uart_ports[UART_SMC1].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SMC1].smcp; - - cpm_uart_ports[UART_SMC1].smcup = - (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE); - addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2); - *addr = PROFF_SMC1; - cpm2_unmap(addr); - - cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]); - cpm_uart_ports[UART_SMC2].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SMC2].smcp; - - cpm_uart_ports[UART_SMC2].smcup = - (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE); - addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2); - *addr = PROFF_SMC2; - cpm2_unmap(addr); - - cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC1 - cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]); - cpm_uart_ports[UART_SCC1].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SCC1].sccp; - cpm_uart_ports[UART_SCC1].sccup = - (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE); - - cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC2 - cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]); - cpm_uart_ports[UART_SCC2].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SCC2].sccp; - cpm_uart_ports[UART_SCC2].sccup = - (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE); - - cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC3 - cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]); - cpm_uart_ports[UART_SCC3].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SCC3].sccp; - cpm_uart_ports[UART_SCC3].sccup = - (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE); - - cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; -#endif - -#ifdef CONFIG_SERIAL_CPM_SCC4 - cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]); - cpm_uart_ports[UART_SCC4].port.mapbase = - (unsigned long)cpm_uart_ports[UART_SCC4].sccp; - cpm_uart_ports[UART_SCC4].sccup = - (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE); - - cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= - ~(UART_SCCM_TX | UART_SCCM_RX); - cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= - ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock(); - cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; -#endif - - return 0; -} -#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index a48b56e74841..7194c63dcf5f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -12,16 +12,6 @@ #include -/* defines for IRQs */ -#ifndef CONFIG_PPC_CPM_NEW_BINDING -#define SMC1_IRQ SIU_INT_SMC1 -#define SMC2_IRQ SIU_INT_SMC2 -#define SCC1_IRQ SIU_INT_SCC1 -#define SCC2_IRQ SIU_INT_SCC2 -#define SCC3_IRQ SIU_INT_SCC3 -#define SCC4_IRQ SIU_INT_SCC4 -#endif - static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); -- cgit v1.2.3