From 84e2d34004dcd0c90d1af43a143511b334f11a4d Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 29 Jul 2008 08:38:55 +0200 Subject: pcmcia: use pcmcia_loop_config in misc pcmcia drivers Use the config loop helper in misc pcmcia drivers. CC: Harald Welte CC: CC: Russell King CC: Ed Okerson CC: linux-serial@vger.kernel.org CC: boti@rocketmail.com CC: linux-usb@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/serial/serial_cs.c | 262 ++++++++++++++++++--------------------------- 1 file changed, 107 insertions(+), 155 deletions(-) (limited to 'drivers/serial/serial_cs.c') diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 164d2a42eb59..ac60cd288418 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -439,43 +439,55 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) return pcmcia_parse_tuple(handle, tuple, parse); } -static int -next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) +/*====================================================================*/ + +static int simple_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) { - int i; - i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - return pcmcia_parse_tuple(handle, tuple, parse); + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) + && (cf->io.win[0].base != 0)) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -EINVAL; } -/*====================================================================*/ +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + p_dev->conf.ConfigIndex = cf->index; + for (j = 0; j < 5; j++) { + p_dev->io.BasePort1 = base[j]; + p_dev->io.IOAddrLines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; +} static int simple_config(struct pcmcia_device *link) { - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - static const int size_table[2] = { 8, 16 }; struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; config_info_t config; - int i, j, try; - int s; - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; + int i, try; /* If the card is already configured, look up the port and irq */ i = pcmcia_get_configuration_info(link, &config); @@ -490,70 +502,28 @@ static int simple_config(struct pcmcia_device *link) info->slave = 1; } if (info->slave) { - kfree(cfg_mem); return setup_serial(link, info, port, config.AssignedIRQ); } } - /* First pass: look for a config entry that looks normal. */ - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (s = 0; s < 2; s++) { - for (try = 0; try < 2; try++) { - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && - (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, tuple, parse); - } - } - } + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && - ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, tuple, parse); - } + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; - found_port: - if (i != CS_SUCCESS) { - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - cs_error(link, RequestIO, i); - kfree(cfg_mem); - return -1; - } + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link, RequestIO, i); + return -1; +found_port: i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { cs_error(link, RequestIRQ, i); @@ -571,86 +541,72 @@ next_entry: i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - kfree(cfg_mem); return -1; } - kfree(cfg_mem); return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); } -static int multi_config(struct pcmcia_device * link) +static int multi_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) { - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - int i, rc, base2 = 0; + int *base2 = priv_data; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort1 + 8; + return 0; + } + } + return -ENODEV; +} - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + void *priv_data) +{ + int *base2 = priv_data; + + if (cf->io.nwin == 2) { + p_dev->conf.ConfigIndex = cf->index; + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.BasePort2 = cf->io.win[1].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort2; + return 0; + } + } + return -ENODEV; +} - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; /* First, look for a generic full-sized window */ link->io.NumPorts1 = info->multi * 8; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && - (cf->io.win[0].len > 8)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort1 + 8; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); - } - - /* If that didn't work, look for two windows */ - if (i != CS_SUCCESS) { + if (pcmcia_loop_config(link, multi_config_check, &base2)) { + /* If that didn't work, look for two windows */ link->io.NumPorts1 = link->io.NumPorts2 = 8; info->multi = 2; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.BasePort2 = cf->io.win[1].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort2; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + printk(KERN_NOTICE "serial_cs: no usable port range" + "found, giving up\n"); + return -ENODEV; } } - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - rc = -1; - goto free_cfg_mem; - } - i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { + /* FIXME: comment does not fit, error handling does not fit */ printk(KERN_NOTICE "serial_cs: no usable port range found, giving up\n"); cs_error(link, RequestIRQ, i); @@ -666,8 +622,7 @@ static int multi_config(struct pcmcia_device * link) i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - rc = -1; - goto free_cfg_mem; + return -ENODEV; } /* The Oxford Semiconductor OXCF950 cards are in fact single-port: @@ -678,7 +633,8 @@ static int multi_config(struct pcmcia_device * link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (cf->index == 1 || cf->index == 3) { + if (link->conf.ConfigIndex == 1 || + link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, link->irq.AssignedIRQ); base2 = link->io.BasePort1; @@ -695,18 +651,14 @@ static int multi_config(struct pcmcia_device * link) if (info->quirk && info->quirk->wakeup) info->quirk->wakeup(link); - rc = 0; - goto free_cfg_mem; + return 0; } setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), link->irq.AssignedIRQ); - rc = 0; -free_cfg_mem: - kfree(cfg_mem); - return rc; + return 0; } /*====================================================================== -- cgit v1.2.3