From 0d8ba1a9793302fdcee3d6d4133c455023ca8ce9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Sep 2005 15:55:36 -0700 Subject: [PATCH] cpm_uart: Fix 2nd serial port on MPC8560 ADS The 2nd serial port on the MPC8560 ADS was not being configured correctly and thus could not be used as a console. Updated the defconfig for the board to configure the proper SCC channel for the 2nd serial port. Signed-off-by: Roy Zang Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/cpm_uart/cpm_uart_cpm2.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/serial/cpm_uart') diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index c4c8f4b44f53..bcf4c99678c0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -142,12 +142,21 @@ void scc2_lineif(struct uart_cpm_port *pinfo) * be supported in a sane fashion. */ #ifndef CONFIG_STX_GP3 +#ifdef CONFIG_MPC8560_ADS + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + io->iop_ppard |= 0x00000018; + io->iop_psord &= ~0x00000008; /* Rx */ + io->iop_psord &= ~0x00000010; /* Tx */ + io->iop_pdird &= ~0x00000008; /* Rx */ + io->iop_pdird |= 0x00000010; /* Tx */ +#else volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; io->iop_pparb |= 0x008b0000; io->iop_pdirb |= 0x00880000; io->iop_psorb |= 0x00880000; io->iop_pdirb &= ~0x00030000; io->iop_psorb &= ~0x00030000; +#endif #endif cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; -- cgit v1.2.3