From efbbb4fd6b6fe0d3d2cfb3c5bbcdf00f1995cb60 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 4 Aug 2015 11:33:59 +0200 Subject: rtc: rx8025: check time validity when necessary Check time validity when reading time as this is when we need to know. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rx8025.c | 58 ++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index f3f1de26c228..24c3d69ce1b9 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -104,6 +104,31 @@ static s32 rx8025_write_regs(const struct i2c_client *client, length, values); } +static int rx8025_check_validity(struct device *dev) +{ + struct rx8025_data *rx8025 = dev_get_drvdata(dev); + int ctrl2; + + ctrl2 = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2); + if (ctrl2 < 0) + return ctrl2; + + if (ctrl2 & RX8025_BIT_CTRL2_VDET) + dev_warn(dev, "power voltage drop detected\n"); + + if (ctrl2 & RX8025_BIT_CTRL2_PON) { + dev_warn(dev, "power-on reset detected, date is invalid\n"); + return -EINVAL; + } + + if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) { + dev_warn(dev, "crystal stopped, date is invalid\n"); + return -EINVAL; + } + + return 0; +} + static int rx8025_reset_validity(struct i2c_client *client) { int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2); @@ -154,21 +179,11 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt) { struct rx8025_data *rx8025 = dev_get_drvdata(dev); u8 date[7]; - int ctrl, err; - - ctrl = rx8025_read_reg(rx8025->client, RX8025_REG_CTRL2); - if (ctrl < 0) - return ctrl; - - if (ctrl & RX8025_BIT_CTRL2_PON) { - dev_warn(dev, "power-on reset detected, date is invalid\n"); - return -EINVAL; - } + int err; - if (!(ctrl & RX8025_BIT_CTRL2_XST)) { - dev_warn(dev, "crystal stopped, date is invalid\n"); - return -EINVAL; - } + err = rx8025_check_validity(dev); + if (err) + return err; err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date); if (err) @@ -250,21 +265,6 @@ static int rx8025_init_client(struct i2c_client *client) /* Keep test bit zero ! */ rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST; - if (ctrl[1] & RX8025_BIT_CTRL2_PON) { - dev_warn(&client->dev, "power-on reset was detected, " - "you may have to readjust the clock\n"); - } - - if (ctrl[1] & RX8025_BIT_CTRL2_VDET) { - dev_warn(&client->dev, "a power voltage drop was detected, " - "you may have to readjust the clock\n"); - } - - if (!(ctrl[1] & RX8025_BIT_CTRL2_XST)) { - dev_warn(&client->dev, "Oscillation stop was detected," - "you may have to readjust the clock\n"); - } - if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) { dev_warn(&client->dev, "Alarm was detected\n"); need_clear = 1; -- cgit v1.2.3