From 10cf8300ecada10f4bd6c9be78439cce98ae6d8b Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 9 Jan 2020 11:34:28 +0100 Subject: MIPS: SGI-IP27: fix readb/writeb addressing Our chosen byte swapping, which is what firmware already uses, is to do readl/writel by normal lw/sw intructions (data invariance). This also means we need to mangle addresses for u8 and u16 accesses. The mangling for 16bit has been done aready, but 8bit one was missing. Correcting this causes different addresses for accesses to the SuperIO and local bus of the IOC3 chip. This is fixed by changing byte order in ioc3 and m48rtc_rtc structs. Acked-by: Alexandre Belloni Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: David S. Miller Cc: Alessandro Zummo Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org --- drivers/rtc/rtc-m48t35.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/rtc') diff --git a/drivers/rtc/rtc-m48t35.c b/drivers/rtc/rtc-m48t35.c index d3a75d447fce..e8194f1f01a8 100644 --- a/drivers/rtc/rtc-m48t35.c +++ b/drivers/rtc/rtc-m48t35.c @@ -20,6 +20,16 @@ struct m48t35_rtc { u8 pad[0x7ff8]; /* starts at 0x7ff8 */ +#ifdef CONFIG_SGI_IP27 + u8 hour; + u8 min; + u8 sec; + u8 control; + u8 year; + u8 month; + u8 date; + u8 day; +#else u8 control; u8 sec; u8 min; @@ -28,6 +38,7 @@ struct m48t35_rtc { u8 date; u8 month; u8 year; +#endif }; #define M48T35_RTC_SET 0x80 -- cgit v1.2.3