From fc45720334ebc9f97335a9ce67896811354f0a1c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 19 Oct 2022 17:29:32 +0200 Subject: mfd: Remove dm355evm_msp driver The DaVinci DM355EVM platform is gone after the removal of all unused board files, so the MTD device along with its sub-devices can be removed as well. Signed-off-by: Arnd Bergmann Acked-by: Bartosz Golaszewski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org --- drivers/rtc/Kconfig | 6 -- drivers/rtc/Makefile | 1 - drivers/rtc/rtc-dm355evm.c | 151 --------------------------------------------- 3 files changed, 158 deletions(-) delete mode 100644 drivers/rtc/rtc-dm355evm.c (limited to 'drivers/rtc') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index bb63edb507da..35298c651730 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -540,12 +540,6 @@ config RTC_DRV_BQ32K This driver can also be built as a module. If so, the module will be called rtc-bq32k. -config RTC_DRV_DM355EVM - tristate "TI DaVinci DM355 EVM RTC" - depends on MFD_DM355EVM_MSP - help - Supports the RTC firmware in the MSP430 on the DM355 EVM. - config RTC_DRV_TWL92330 bool "TI TWL92330/Menelaus" depends on MENELAUS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index aab22bc63432..c2d474985919 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -46,7 +46,6 @@ obj-$(CONFIG_RTC_DRV_DA9055) += rtc-da9055.o obj-$(CONFIG_RTC_DRV_DA9063) += rtc-da9063.o obj-$(CONFIG_RTC_DRV_DAVINCI) += rtc-davinci.o obj-$(CONFIG_RTC_DRV_DIGICOLOR) += rtc-digicolor.o -obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c deleted file mode 100644 index 94fb16ac3e0f..000000000000 --- a/drivers/rtc/rtc-dm355evm.c +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware - * - * Copyright (c) 2008 by David Brownell - */ -#include -#include -#include -#include - -#include -#include - - -/* - * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed - * a 1 Hz counter. When a backup battery is supplied, that makes a - * reasonable RTC for applications where alarms and non-NTP drift - * compensation aren't important. - * - * The only real glitch is the inability to read or write all four - * counter bytes atomically: the count may increment in the middle - * of an operation, causing trouble when the LSB rolls over. - * - * This driver was tested with firmware revision A4. - */ -union evm_time { - u8 bytes[4]; - u32 value; -}; - -static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm) -{ - union evm_time time; - int status; - int tries = 0; - - do { - /* - * Read LSB(0) to MSB(3) bytes. Defend against the counter - * rolling over by re-reading until the value is stable, - * and assuming the four reads take at most a few seconds. - */ - status = dm355evm_msp_read(DM355EVM_MSP_RTC_0); - if (status < 0) - return status; - if (tries && time.bytes[0] == status) - break; - time.bytes[0] = status; - - status = dm355evm_msp_read(DM355EVM_MSP_RTC_1); - if (status < 0) - return status; - if (tries && time.bytes[1] == status) - break; - time.bytes[1] = status; - - status = dm355evm_msp_read(DM355EVM_MSP_RTC_2); - if (status < 0) - return status; - if (tries && time.bytes[2] == status) - break; - time.bytes[2] = status; - - status = dm355evm_msp_read(DM355EVM_MSP_RTC_3); - if (status < 0) - return status; - if (tries && time.bytes[3] == status) - break; - time.bytes[3] = status; - - } while (++tries < 5); - - dev_dbg(dev, "read timestamp %08x\n", time.value); - - rtc_time64_to_tm(le32_to_cpu(time.value), tm); - return 0; -} - -static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm) -{ - union evm_time time; - unsigned long value; - int status; - - value = rtc_tm_to_time64(tm); - time.value = cpu_to_le32(value); - - dev_dbg(dev, "write timestamp %08x\n", time.value); - - /* - * REVISIT handle non-atomic writes ... maybe just retry until - * byte[1] sticks (no rollover)? - */ - status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0); - if (status < 0) - return status; - - status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1); - if (status < 0) - return status; - - status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2); - if (status < 0) - return status; - - status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3); - if (status < 0) - return status; - - return 0; -} - -static const struct rtc_class_ops dm355evm_rtc_ops = { - .read_time = dm355evm_rtc_read_time, - .set_time = dm355evm_rtc_set_time, -}; - -/*----------------------------------------------------------------------*/ - -static int dm355evm_rtc_probe(struct platform_device *pdev) -{ - struct rtc_device *rtc; - - rtc = devm_rtc_allocate_device(&pdev->dev); - if (IS_ERR(rtc)) - return PTR_ERR(rtc); - - platform_set_drvdata(pdev, rtc); - - rtc->ops = &dm355evm_rtc_ops; - rtc->range_max = U32_MAX; - - return devm_rtc_register_device(rtc); -} - -/* - * I2C is used to talk to the MSP430, but this platform device is - * exposed by an MFD driver that manages I2C communications. - */ -static struct platform_driver rtc_dm355evm_driver = { - .probe = dm355evm_rtc_probe, - .driver = { - .name = "rtc-dm355evm", - }, -}; - -module_platform_driver(rtc_dm355evm_driver); - -MODULE_LICENSE("GPL"); -- cgit v1.2.3