From c4632aed3e5b134c55b54af19db49662959384c1 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 7 Mar 2012 16:39:05 +0530 Subject: regulator: tps65910: Configure correct value for VDDCTRL vout reg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/tps65910-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 5c15ba01e9c7..40ecf5165899 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -662,7 +662,7 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel); break; case TPS65911_REG_VDDCTRL: - vsel = selector; + vsel = selector + 3; tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel); } -- cgit v1.2.3