From a9597305d97f6cf7c9e89dc1461e834c446d91fd Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 29 Apr 2016 12:59:51 +0200 Subject: regulator: max77686: Configure enable time to properly handle regulator enable The enable time for buck regulators was not configured but actually is essential: consumers, like usb3503, doing hard reset (regulator off/on) should wait for the regulator to settle. Configure the enable time according to datasheet. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- drivers/regulator/max77686-regulator.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c index d1ab6a4da88f..ac4fa581e0a5 100644 --- a/drivers/regulator/max77686-regulator.c +++ b/drivers/regulator/max77686-regulator.c @@ -41,6 +41,8 @@ #define MAX77686_LDO_LOW_UVSTEP 25000 #define MAX77686_BUCK_MINUV 750000 #define MAX77686_BUCK_UVSTEP 50000 +#define MAX77686_BUCK_ENABLE_TIME 40 /* us */ +#define MAX77686_DVS_ENABLE_TIME 22 /* us */ #define MAX77686_RAMP_DELAY 100000 /* uV/us */ #define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */ #define MAX77686_DVS_MINUV 600000 @@ -422,6 +424,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .min_uV = MAX77686_BUCK_MINUV, \ .uV_step = MAX77686_BUCK_UVSTEP, \ .ramp_delay = MAX77686_RAMP_DELAY, \ + .enable_time = MAX77686_BUCK_ENABLE_TIME, \ .n_voltages = MAX77686_VSEL_MASK + 1, \ .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ .vsel_mask = MAX77686_VSEL_MASK, \ @@ -439,6 +442,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .min_uV = MAX77686_BUCK_MINUV, \ .uV_step = MAX77686_BUCK_UVSTEP, \ .ramp_delay = MAX77686_RAMP_DELAY, \ + .enable_time = MAX77686_BUCK_ENABLE_TIME, \ .n_voltages = MAX77686_VSEL_MASK + 1, \ .vsel_reg = MAX77686_REG_BUCK1OUT, \ .vsel_mask = MAX77686_VSEL_MASK, \ @@ -456,6 +460,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .min_uV = MAX77686_DVS_MINUV, \ .uV_step = MAX77686_DVS_UVSTEP, \ .ramp_delay = MAX77686_DVS_RAMP_DELAY, \ + .enable_time = MAX77686_DVS_ENABLE_TIME, \ .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \ .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ .vsel_mask = MAX77686_DVS_VSEL_MASK, \ -- cgit v1.2.3