From 3ec6eb9cc2dbfa5b626f813ab8077eb71da60af2 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 4 Apr 2013 18:17:19 +0200 Subject: regulator: max8952: Separate constraints from platform data struct This patch modifies platform data structure of max8952 driver to use pointer to regulator_init_data struct instead of embedding it. This is a prerequisite for adding Device Tree support for the driver. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown --- drivers/regulator/max8952.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index fc7935a19e3a..100b9177dba1 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -154,11 +154,11 @@ static int max8952_pmic_probe(struct i2c_client *client, max8952->pdata = pdata; config.dev = max8952->dev; - config.init_data = &pdata->reg_data; + config.init_data = pdata->reg_data; config.driver_data = max8952; config.ena_gpio = pdata->gpio_en; - if (pdata->reg_data.constraints.boot_on) + if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; max8952->rdev = regulator_register(®ulator, &config); -- cgit v1.2.3 From 3ff4aa95b3cd960a1c2e1422bc3dbd604f88271b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Thu, 4 Apr 2013 18:17:20 +0200 Subject: regulator: max8952: Add Device Tree support This patch adds Device Tree support to max8952 regulator driver. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/max8952.txt | 52 ++++++++++++++++ drivers/regulator/max8952.c | 70 ++++++++++++++++++++++ include/linux/regulator/max8952.h | 8 +-- 3 files changed, 126 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/max8952.txt (limited to 'drivers/regulator') diff --git a/Documentation/devicetree/bindings/regulator/max8952.txt b/Documentation/devicetree/bindings/regulator/max8952.txt new file mode 100644 index 000000000000..866fcdd0f4eb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8952.txt @@ -0,0 +1,52 @@ +Maxim MAX8952 voltage regulator + +Required properties: +- compatible: must be equal to "maxim,max8952" +- reg: I2C slave address, usually 0x60 +- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages + in microvolts. All values must be from range <770000, 1400000> +- any required generic properties defined in regulator.txt + +Optional properties: +- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection +- max8952,en-gpio: GPIO used to control enable status of regulator +- max8952,default-mode: index of default DVS voltage, from <0, 3> range +- max8952,sync-freq: sync frequency, must be one of following values: + - 0: 26 MHz + - 1: 13 MHz + - 2: 19.2 MHz + Defaults to 26 MHz if not specified. +- max8952,ramp-speed: voltage ramp speed, must be one of following values: + - 0: 32mV/us + - 1: 16mV/us + - 2: 8mV/us + - 3: 4mV/us + - 4: 2mV/us + - 5: 1mV/us + - 6: 0.5mV/us + - 7: 0.25mV/us + Defaults to 32mV/us if not specified. +- any available generic properties defined in regulator.txt + +Example: + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + /* max8952-specific properties */ + max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,en-gpio = <&gpx0 1 0>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + /* generic regulator properties */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index 100b9177dba1..4259c78abf88 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -28,6 +28,9 @@ #include #include #include +#include +#include +#include #include /* Registers */ @@ -126,6 +129,69 @@ static const struct regulator_desc regulator = { .owner = THIS_MODULE, }; +#ifdef CONFIG_OF +static struct of_device_id max8952_dt_match[] = { + { .compatible = "maxim,max8952" }, + {}, +}; +MODULE_DEVICE_TABLE(of, max8952_dt_match); + +static struct max8952_platform_data *max8952_parse_dt(struct device *dev) +{ + struct max8952_platform_data *pd; + struct device_node *np = dev->of_node; + int ret; + int i; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) { + dev_err(dev, "Failed to allocate platform data\n"); + return NULL; + } + + pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0); + pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1); + pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0); + + if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode)) + dev_warn(dev, "Default mode not specified, assuming 0\n"); + + ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt", + pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode)); + if (ret) { + dev_err(dev, "max8952,dvs-mode-microvolt property not specified"); + return NULL; + } + + for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) { + if (pd->dvs_mode[i] < 770000 || pd->dvs_mode[i] > 1400000) { + dev_err(dev, "DVS voltage %d out of range\n", i); + return NULL; + } + pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000; + } + + if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq)) + dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n"); + + if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed)) + dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n"); + + pd->reg_data = of_get_regulator_init_data(dev, np); + if (!pd->reg_data) { + dev_err(dev, "Failed to parse regulator init data\n"); + return NULL; + } + + return pd; +} +#else +static struct max8952_platform_data *max8952_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + static int max8952_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { @@ -136,6 +202,9 @@ static int max8952_pmic_probe(struct i2c_client *client, int ret = 0, err = 0; + if (client->dev.of_node) + pdata = max8952_parse_dt(&client->dev); + if (!pdata) { dev_err(&client->dev, "Require the platform data\n"); return -EINVAL; @@ -271,6 +340,7 @@ static struct i2c_driver max8952_pmic_driver = { .remove = max8952_pmic_remove, .driver = { .name = "max8952", + .of_match_table = of_match_ptr(max8952_dt_match), }, .id_table = max8952_ids, }; diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h index c13aa34d9019..4dbb63a1d4ab 100644 --- a/include/linux/regulator/max8952.h +++ b/include/linux/regulator/max8952.h @@ -122,11 +122,11 @@ struct max8952_platform_data { int gpio_vid1; int gpio_en; - u8 default_mode; - u8 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */ + u32 default_mode; + u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */ - u8 sync_freq; - u8 ramp_speed; + u32 sync_freq; + u32 ramp_speed; struct regulator_init_data *reg_data; }; -- cgit v1.2.3 From 71622e15dd4d497447d19317d93292184ceb67d9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Apr 2013 22:15:21 +0800 Subject: regulator: max8952: Add missing config.of_node setting for regulator register Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/max8952.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/regulator') diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index 4259c78abf88..5259c2fea90a 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -225,6 +225,7 @@ static int max8952_pmic_probe(struct i2c_client *client, config.dev = max8952->dev; config.init_data = pdata->reg_data; config.driver_data = max8952; + config.of_node = client->dev.of_node; config.ena_gpio = pdata->gpio_en; if (pdata->reg_data->constraints.boot_on) -- cgit v1.2.3