From 91a024e80336528d12b67b5a2e636b9e4467d3ec Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Mon, 10 Jul 2017 16:33:39 +0200 Subject: regulator: cpcap: Fix standby mode The original patch from Tony uses standby mode bit inverted, which is not correct. This fixes all instances in the driver code for get & set mode. This did not yet make problems, since mode has not been changed by any mainline driver so far. Fixes: 0ad4c07edd41 ("regulator: cpcap: Add basic regulator support") Acked-by: Tony Lindgren Signed-off-by: Sebastian Reichel Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/cpcap-regulator.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/cpcap-regulator.c b/drivers/regulator/cpcap-regulator.c index cc98aceed1c1..ce1cab320f6f 100644 --- a/drivers/regulator/cpcap-regulator.c +++ b/drivers/regulator/cpcap-regulator.c @@ -77,6 +77,8 @@ #define CPCAP_BIT_VAUDIO_MODE0 BIT(1) #define CPCAP_BIT_V_AUDIO_EN BIT(0) +#define CPCAP_BIT_AUDIO_NORMAL_MODE 0x00 + /* * Off mode configuration bit. Used currently only by SW5 on omap4. There's * the following comment in Motorola Linux kernel tree for it: @@ -217,7 +219,7 @@ static unsigned int cpcap_regulator_get_mode(struct regulator_dev *rdev) regmap_read(rdev->regmap, rdev->desc->enable_reg, &value); - if (!(value & CPCAP_BIT_AUDIO_LOW_PWR)) + if (value & CPCAP_BIT_AUDIO_LOW_PWR) return REGULATOR_MODE_STANDBY; return REGULATOR_MODE_NORMAL; @@ -230,10 +232,10 @@ static int cpcap_regulator_set_mode(struct regulator_dev *rdev, switch (mode) { case REGULATOR_MODE_NORMAL: - value = CPCAP_BIT_AUDIO_LOW_PWR; + value = CPCAP_BIT_AUDIO_NORMAL_MODE; break; case REGULATOR_MODE_STANDBY: - value = 0; + value = CPCAP_BIT_AUDIO_LOW_PWR; break; default: return -EINVAL; -- cgit v1.2.3