From 90068348b7566c83efbf1985d7853a831aabfaf4 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Mon, 24 Jun 2013 16:50:55 +0530 Subject: regulator: s2mps11: Convert ramp rate to uV/us and set default ramp rate This patch makes driver to use uV/us as units of ramp_delay. It makes driver in compliance with regulator framework and make ramp rate precise. This patch also sets default ramp rate in regulator descriptor which can be used in case if case ramp rate is not set in regulator constraints. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- drivers/regulator/s2mps11.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index c9f16e17920f..2f62564ca936 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -42,7 +42,7 @@ static int get_ramp_delay(int ramp_delay) { unsigned char cnt = 0; - ramp_delay /= 6; + ramp_delay /= 6250; while (true) { ramp_delay = ramp_delay >> 1; @@ -113,6 +113,7 @@ static struct regulator_ops s2mps11_buck_ops = { .min_uV = S2MPS11_BUCK_MIN1, \ .uV_step = S2MPS11_BUCK_STEP1, \ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ .enable_reg = S2MPS11_REG_B1CTRL1 + (num - 1) * 2, \ @@ -128,6 +129,7 @@ static struct regulator_ops s2mps11_buck_ops = { .min_uV = S2MPS11_BUCK_MIN1, \ .uV_step = S2MPS11_BUCK_STEP1, \ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B5CTRL2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ .enable_reg = S2MPS11_REG_B5CTRL1, \ @@ -143,6 +145,7 @@ static struct regulator_ops s2mps11_buck_ops = { .min_uV = S2MPS11_BUCK_MIN1, \ .uV_step = S2MPS11_BUCK_STEP1, \ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ .enable_reg = S2MPS11_REG_B6CTRL1 + (num - 6) * 2, \ @@ -158,6 +161,7 @@ static struct regulator_ops s2mps11_buck_ops = { .min_uV = S2MPS11_BUCK_MIN3, \ .uV_step = S2MPS11_BUCK_STEP3, \ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B9CTRL2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ .enable_reg = S2MPS11_REG_B9CTRL1, \ @@ -173,6 +177,7 @@ static struct regulator_ops s2mps11_buck_ops = { .min_uV = S2MPS11_BUCK_MIN2, \ .uV_step = S2MPS11_BUCK_STEP2, \ .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS11_RAMP_DELAY, \ .vsel_reg = S2MPS11_REG_B10CTRL2, \ .vsel_mask = S2MPS11_BUCK_VSEL_MASK, \ .enable_reg = S2MPS11_REG_B10CTRL1, \ -- cgit v1.2.3