From 77409d9bcc0ee3fc309a3d6fd18553f6ec5a9aa6 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 12 Aug 2013 14:21:14 +0530 Subject: regulator: palmas: model SMPS10 as two regulators SMPS10 has two outputs OUT1 and OUT2 and have one input IN1. SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 configures it in BOOST mode. For BYPASS mode regulator_allow_bypass() API can be used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be enabled using regulator_enable(). [ axel.lin@ingics.com : Simplify regulator_desc setting for SMPS10_[OUT1|OUT2] Signed-off-by: J Keerthy Signed-off-by: Laxman Dewangan Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index d0c87856dd25..40ed92ba03f4 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -97,10 +97,15 @@ static const struct regs_info palmas_regs_info[] = { .ctrl_addr = PALMAS_SMPS9_CTRL, }, { - .name = "SMPS10", + .name = "SMPS10_OUT2", .sname = "smps10-in", .ctrl_addr = PALMAS_SMPS10_CTRL, }, + { + .name = "SMPS10_OUT1", + .sname = "smps10-out2", + .ctrl_addr = PALMAS_SMPS10_CTRL, + }, { .name = "LDO1", .sname = "ldo1-in", @@ -487,6 +492,8 @@ static struct regulator_ops palmas_ops_smps10 = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, }; static int palmas_is_enabled_ldo(struct regulator_dev *dev) @@ -538,7 +545,8 @@ static int palmas_smps_init(struct palmas *palmas, int id, return ret; switch (id) { - case PALMAS_REG_SMPS10: + case PALMAS_REG_SMPS10_OUT1: + case PALMAS_REG_SMPS10_OUT2: reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK; if (reg_init->mode_sleep) reg |= reg_init->mode_sleep << @@ -681,7 +689,8 @@ static struct of_regulator_match palmas_matches[] = { { .name = "smps7", }, { .name = "smps8", }, { .name = "smps9", }, - { .name = "smps10", }, + { .name = "smps10_out2", }, + { .name = "smps10_out1", }, { .name = "ldo1", }, { .name = "ldo2", }, { .name = "ldo3", }, @@ -838,7 +847,8 @@ static int palmas_regulators_probe(struct platform_device *pdev) continue; ramp_delay_support = true; break; - case PALMAS_REG_SMPS10: + case PALMAS_REG_SMPS10_OUT1: + case PALMAS_REG_SMPS10_OUT2: if (!PALMAS_PMIC_HAS(palmas, SMPS10_BOOST)) continue; } @@ -872,7 +882,8 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].id = id; switch (id) { - case PALMAS_REG_SMPS10: + case PALMAS_REG_SMPS10_OUT1: + case PALMAS_REG_SMPS10_OUT2: pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES; pmic->desc[id].ops = &palmas_ops_smps10; pmic->desc[id].vsel_reg = @@ -882,7 +893,14 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, PALMAS_SMPS10_CTRL); - pmic->desc[id].enable_mask = SMPS10_BOOST_EN; + if (id == PALMAS_REG_SMPS10_OUT1) + pmic->desc[id].enable_mask = SMPS10_SWITCH_EN; + else + pmic->desc[id].enable_mask = SMPS10_BOOST_EN; + pmic->desc[id].bypass_reg = + PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, + PALMAS_SMPS10_CTRL); + pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; break; -- cgit v1.2.3